buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolling Mills & Ring Formers

Rolling Mills for Sale

342 new & used rolling mills items for sale
1 | 2 | 3 | 4
Refine: Viewing 101 - 200 of 342 matches
Sort by:
Items Per Page:  20 |  50 |  100
12" X 12" STANAT 2 HI WIRE FLATTENING ROLLING MILL (14110)
$RFQ
12" X 12" STANAT 2 HI WIRE FLATTENING ROLLING MILL (14110)
12" x 12" STANAT 2 HI WIRE FLATTENING ROLLING MILLSTOCK # 14110ROLL SIZE: 12" X 12" (304.8mm X 304.8mm)ROLL BEARINGS: ROLLERMILL ROLLS: INTERNAL WATER COOLINGMILL STAND CROSS SECTI
12" X 5" WATERBURY FARREL 2 HI WIRE FLATTENING ROLLING MILL (14108)
$RFQ
12" X 5" WATERBURY FARREL 2 HI WIRE FLATTENING ROLLING MILL (14108)
Dimensions 12" X 5" 12" X 5" WATERBURY FARREL 2 HI WIRE FLATTENING ROLLING MILLSTOCK #
6.7" (170mm) X 22" (560mm) X 20" (500mm) MINO 4 HIGH REVERSING ROLLING MILL
$RFQ
6.7" (170mm) X 22" (560mm) X 20" (500mm) MINO 4 HIGH REVERSING ROLLING MILL
6.7" (170mm) X 22" (560mm) X 20" (500mm) MINO 4 HIGH REVERSING ROLLING MILL (14087)
20" x 22" BLISS 2 HIGH COLD ROLLING MILL (14077)
$RFQ
20" x 22" BLISS 2 HIGH COLD ROLLING MILL (14077)
Max Width Workpiece 22 inches Max Roll Dia.
670mm (26") SUNDWIG 20 HIGH SENDZIMIR TYPE ROLLING MILL (14076)
$RFQ
670mm (26") SUNDWIG 20 HIGH SENDZIMIR TYPE ROLLING MILL (14076)
Dimensions 670mm (26") Sundwig 20hi reversible cold rolling mill for foil metalsStock
6" x 10" FENN 2 HIGH ROLLING MILL USED FOR CLADDING (14074)
$RFQ
6" x 10" FENN 2 HIGH ROLLING MILL USED FOR CLADDING (14074)
Max Width Workpiece 10 inches Max Roll Dia.
5" X 16" X 16" Ruesch 4 High Reversing Rolling Mill (14042)
$RFQ
5" X 16" X 16" Ruesch 4 High Reversing Rolling Mill (14042)
Max Width Workpiece 14 inches Work Roll Dia.
8" x 8", STANDARD 2 HI, 10 HP, Handwheel Screwdown, Non Reversing Rolling Mill f
$RFQ
8" x 8", STANDARD 2 HI, 10 HP, Handwheel Screwdown, Non Reversing Rolling Mill f
Max Width Workpiece 8 inches Max Roll Dia.
14" (355mm) x 16" (406mm), RWF, SKIN PASS MILL ROLLING MILL, HYD SCREWDOWN, NON
$RFQ
14" (355mm) x 16" (406mm), RWF, SKIN PASS MILL ROLLING MILL, HYD SCREWDOWN, NON
Max Width Workpiece 15.5 inches Max Roll Dia.
9" (228mm) x 12" (305mm) FENN 2-HI CLADDING ROLLING MILL (13983)
$RFQ
9" (228mm) x 12" (305mm) FENN 2-HI CLADDING ROLLING MILL (13983)
Max Width Workpiece 11 Max Roll Dia. 9
4" X 14" X 20" RUESCH MODEL 265 4 HI REVERSING ROLLING MILL (13922)
$RFQ
4" X 14" X 20" RUESCH MODEL 265 4 HI REVERSING ROLLING MILL (13922)
Max Width Workpiece 18 inches Work Roll Dia.
4" X 14" X 20" RUESCH MODEL 265 4 HI REVERSING ROLLING MILL (13921)
$RFQ
4" X 14" X 20" RUESCH MODEL 265 4 HI REVERSING ROLLING MILL (13921)
Max Width Workpiece 18 inches Work Roll Dia.
1" (25.4mm) x 2" (50.8mm) BUHLER 2 HIGH ROLLING MILL/WIRE FLATTENING MILL (13899
$RFQ
1" (25.4mm) x 2" (50.8mm) BUHLER 2 HIGH ROLLING MILL/WIRE FLATTENING MILL (13899
Max Width Workpiece 1 inches Max Roll Dia.
One used 16"(417mm)DIA x 19"(457mm)FACE I2S ONE WAY 2HI MILL W/ HYD. SCREWDOWNS.
$RFQ
One used 16"(417mm)DIA x 19"(457mm)FACE I2S ONE WAY 2HI MILL W/ HYD. SCREWDOWNS.
16" (419mm) DIA. x 18" (457mm) FACE I2S 2HI MILL W/ HYD. SCREWDOWNS, NEW 2002MACHINE 13873MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S)YEAR - 2002STRIP RANGE - .250" - .063" (6.35mm - 1.60mm) STRIP WIDTH - 14.25" -
ZR23-43 SENDZIMIR 20 HIGH REVERSING ROLLING MILL (13764)
$RFQ
ZR23-43 SENDZIMIR 20 HIGH REVERSING ROLLING MILL (13764)
40" (1020mm) SENDZIMIR ZR23-43 20-HI REVERSING MILL (13764) MACHINE #13764 SPECIFICATIONS: MANUFACTURER: SENDZIMIR, FRANCE YEAR: 1988-1989 MILL MODEL : ZR23-43 TYPE : SING STAND 20-HI COLD REVERSING INPUT
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727)
$RFQ
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727)
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727) MACHINE 13727 Manufacturer: Waterbury Farrel Company USA ZR23-31 Sendzimir 20HI Mill as loaded in containers as follow Strip Width: 370-740 mm Th
6 1/2"(165mm) x 8" (203mm) FENN POWERED SCREWDOWNS 5 HP (13684)
$RFQ
6 1/2"(165mm) x 8" (203mm) FENN POWERED SCREWDOWNS 5 HP (13684)
MACHINE 13684 Fenn 2 HI Rolling Mill Line Consisting of: Durant Double-End Uncoiler: Model DDSC-1, SN:11122 10" wide stock width max 6" to 24" Coil I.D. Range Manual expansion 600 LB. Coil Weight Mechanic
3" (976.2mm) x 10.5" (267mm) x 10.5" (267mm) RUESCH 4 HIGH ROLLING MILL (13
$RFQ
3" (976.2mm) x 10.5" (267mm) x 10.5" (267mm) RUESCH 4 HIGH ROLLING MILL (13
MACHINE 13682 Manufacturer: Ruesch Machine Co. SERIAL #: N1722 - 5086 Type Rolling Mill: Ruesch 4 HI Rolling Mill Model: 210 Roll Face: 10.5" Work Roll Diameter:
1.625" (42mm) X 5" (127mm) X 7 1/2" (191mm), FENN, NON REVERSING (13681)
$RFQ
1.625" (42mm) X 5" (127mm) X 7 1/2" (191mm), FENN, NON REVERSING (13681)
MACHINE 13681 Fenn Combination 4 HI - 2 HI Mill Model: 4-053-C Roll Face: 7.5" (191mm) Wide Work Roll: 1.625" (42mm) Dia. Backup Roll: 5.250" ( 134mm) Dia. Backup Rol
7"(180mm) X 20"(510mm) X 20.5"(520mm) KOBE 4 HIGH REVERSING ROLLING MILL (1
$RFQ
7"(180mm) X 20"(510mm) X 20.5"(520mm) KOBE 4 HIGH REVERSING ROLLING MILL (1
MACHINE #13553 Supplier and Maker: KOBE STEEL LTD.(Japan) Year of Manufacturing: 1987 Material to be rolled: Copper and Copper Alloy ThicknessMax. 3.5mm Width: 260 - 435mm (min
8 21/32"(220mm) X 16"(400mm) X 22 13/16"(580mm) RWF 6 HIGH CLUSTER MILL (13
$RFQ
8 21/32"(220mm) X 16"(400mm) X 22 13/16"(580mm) RWF 6 HIGH CLUSTER MILL (13
MACHINE #13522 RWF 6HI rolling mill Man : RWF Support rolls dia. 400 mm ( x 4 ) Working rolls dia. 220 mm ( x 2 )
6 5/16" (160mm) X 13"(330mm) X 20 7/8"(530mm) SCHMITZ 6 HI CLUSTER MILL (13
$RFQ
6 5/16" (160mm) X 13"(330mm) X 20 7/8"(530mm) SCHMITZ 6 HI CLUSTER MILL (13
MACHINE # 13521 SCHMITZ 6HI rolling mill Manufacturer: SCHMITZ Support rolls dia. 330mm (13") ( x 4 ) Working rolls dia. 160mm (6.3") ( x 2 ) Width working rolls : 530m
5"(127mm) X 17"(430mm) X 15 3/4"(400mm) SCHMITZ 4 HI REVERSING (13434)
$RFQ
5"(127mm) X 17"(430mm) X 15 3/4"(400mm) SCHMITZ 4 HI REVERSING (13434)
MACHINE# 13434 SPECIFICATIONS: Manufacturer: SCHMITZ, Germany Type: 4-Hi reversing Cold rolling mill with Hydraulic AGC and DC motors. Work roll dia: 150-123 mm (4.8"- 5.9") Backup roll dia: 450-431 mm (17.7"- 17") Ma
16" (400mm) X 24" (600mm) GRISET 2 HIGH COLD BREAKDOWN ROLLING MILL (13402)
$RFQ
16" (400mm) X 24" (600mm) GRISET 2 HIGH COLD BREAKDOWN ROLLING MILL (13402)
MACHINE# 13402 Specifications: Manufacturer: Griset S.A.S. (France) Type: 2-HI Cold Breakdown Mill Maximum Strip Width: 500mm (20") Maximum Entry Thickness: 18mm (0.70") - Copper/Brass Roll Size: - Diameter: 400mm (
22" (558mm) x 33" (838mm) 2-HI UNITED TEMPER PASS MILL (13353)
$RFQ
22" (558mm) x 33" (838mm) 2-HI UNITED TEMPER PASS MILL (13353)
22" (558mm) x 33" (838mm) 2-HI UNITED TEMPER PASS MILL (13353)
52"(1321mm) DMS ZR22-BBS-52 SENDZIMIR ROLLING MILL (13334)
$RFQ
52"(1321mm) DMS ZR22-BBS-52 SENDZIMIR ROLLING MILL (13334)
MACHINE# 13314 SPECIFICATIONS: Manufacture: DMS (France) Year of Manufacture: 1992 Model: ZR22-BBS-52 Design: 20-High Z-Mill/Sendzimir Reversing Mill Material: High Carbon / Low carbon / Stainless Steel Material Trave
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332)
$RFQ
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332)
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332) MACHINE 13332 MANUFACTURER: H J RUESCH COMPANY, USA Type - 4HI Reversing Cold Mill Screwdowns - Electro Mechanical Adjustment Width R
22" X 40" LEWIS 2 HI NON REVERESING 200 HP, 600 FPM (13185)
$RFQ
22" X 40" LEWIS 2 HI NON REVERESING 200 HP, 600 FPM (13185)
MACHINE 13185 22" x 40" Non-Reversing Cold Mill Type Mill: 2 High Non Reversing Rolling Mill Coil Weight: 30,000 lbs. Mill Speed: 309 to 618 FPM Post Size:
25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129)
$RFQ
25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129)
MACHINE # 13129 MANUFACTURER: WATERBURY FARREL SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 37IN/939.802MM MINIMUM: 14IN/355.601MM ENTR
ZR 19-25, 12 HI Sendzimir Reversing Cold Rolling Mill, Stainless Steel (13051)
$RFQ
ZR 19-25, 12 HI Sendzimir Reversing Cold Rolling Mill, Stainless Steel (13051)
ZR 19-25 Sendzimir 12 High Rolling Mill (13051)MACHINE# 13051 SPECIFICATIONS: This Sendzimir Mill ZR 19-25 12-HI Rolling Mill for stainless steel is now in storage. The Mill is for the most part complete. Some compone
12" x 8", STRILICH, 3 STAND TANDEM, 15 HP PER STAND (12413)
$RFQ
12" x 8", STRILICH, 3 STAND TANDEM, 15 HP PER STAND (12413)
MACHINE # 12413 MANUFACTURER:...................STRILICH TECHNOLOGIES INC MODEL:......................... 380 TYPE MILL:..................... 3 STAND TANDEM COLD REDUCING ROLLING MILL ROLL SIZE:.....................
5 1/2" x 6", MARSHALL RICHARDS, 10 HP DC, WINDERS (11983)
$RFQ
5 1/2" x 6", MARSHALL RICHARDS, 10 HP DC, WINDERS (11983)
MACHINE # 11983 MANUFACTURER: Marshall Richards SERIAL NUMBER: 661846 SPECIFICATIONS: Roll diameter: 5-1/4" ( 135mm) Roll Width: 6" (150mm) Rolling Speed : 0 to 65 ft/min (0 to 20 m/min) Srewdown: Man
ZR22-49 INNOCENTI SENDZIMIR 20-HI COLD ROLLING MILL (11470)
$RFQ
ZR22-49 INNOCENTI SENDZIMIR 20-HI COLD ROLLING MILL (11470)
ZR22-49 INNOCENTI SENDZIMIR 20-HI COLD ROLLING MILL (11470)
5" x 10" x 10", STANAT, 4 HI, ROLLING MILL 25 HP DC, POWER SCREWDOWNS (1064
$RFQ
5" x 10" x 10", STANAT, 4 HI, ROLLING MILL 25 HP DC, POWER SCREWDOWNS (1064
MAX ROLL WIDTH 10 inches 5" x 10" x 10" STANAT 4-HI BONDING ROLLING MILL (10647)Machine
1-7/8" X 8" X 8" FENN, DUAL HANDWHEEL SCREWDOWN, RCLR/PAYOFF MILL MOUNTED (
$RFQ
1-7/8" X 8" X 8" FENN, DUAL HANDWHEEL SCREWDOWN, RCLR/PAYOFF MILL MOUNTED (
(One Used) 1-7/8" (47.6mm) x 8" (203.2mm) x 8" (203.2mm) FENN 4 HI ROLLING MILLMACHINE # 6433MANUFACTURER: FENN MANUFACTURING COTYPE MILL: 4 HIGH ROLLING MILLWORK ROLL SIZE: 1-7/8" (47.6mm) DIA X 8" (203.2mm) FACE WIDTHW
12" (300mm) x 14" (350mm), CARL WEZEL, 2 HIGH ROLLING MILL PRECISION, AGC, HYD.
$RFQ
12" (300mm) x 14" (350mm), CARL WEZEL, 2 HIGH ROLLING MILL PRECISION, AGC, HYD.
12" (300mm) x 14" (350mm) Carl Wezel 2 High Rolling MillMACHINE #4228MANUFACTURER: CARL WEZEL K.G. (KRUPP)MODEL: BW 300/350ROLL SIZE: 12" DIA. x 14" FACE(300mm Dia. x 350mm Face)SERIAL NUMBER: 740523YEAR OF MANUFACTURE:
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610)
$RFQ
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610)
MACHINE # 1610Manufacturer Waterbury Farrel Co.Model ZR 15 - 8-1/2"Type Saddle Type 1-2-3Roll Size .468" (11.88mm) wor
Lockformer 14 Stand Duplex Roll Former
$RFQ
Lockformer 14 Stand Duplex Roll Former
Lockformer 14 Stand Duplex Roll Former S/N: 1575, Stock No: 18229 Model: 14D-SC Number of Stands: 14 Shaft Diameter: 1-3/8" Horizontal Centers: 8" Vertical Centers: 4-1/2" Max Sheet Width: 60"
  • # Stands: #14
    18 Stand Bradbury Dual Head (Adjustable) Duplex Rollformer
    $79,950
    18 Stand Bradbury Dual Head (Adjustable) Duplex Rollformer
    . We are pleased to offer for your consideration: (1) 18 stand Bradbury Dual Head (Adjustable) Duplex Rollformer Stock Number: 13380 List Price: $89,000 Discounted Price: $79,950 Manufacturer: Bradbury Model
    • # Stands: #18
    • Roll diameter: 1.5"
      12-Stand Delta Panel Rollforming Line; Decoiler; Cutoff Press; Tooling
      $25,000
      12-Stand Delta Panel Rollforming Line; Decoiler; Cutoff Press; Tooling
      . We are pleased to offer for your consideration: (1) 12-Stand Delta Panel Rollforming Line Stock Number: 13595 List Price: $29,500 Discounted Price: $25,000 Decoiler: American Steel Line ... Model: 1000 ..
      • # Stands: #12
      • Roll diameter: 2"
        3 USED TISHKEN OUTBOARD SUPPORTS FOR A TISHKEN ROLLFORMER, Stock# 10898
        $RFQ
        3 USED TISHKEN OUTBOARD SUPPORTS FOR A TISHKEN ROLLFORMER, Stock# 10898
        Brand: Tishken(3) Used outboard supports for a Tishken roll formerFits a model MW-2 style roll former$950 per outboard supportSold As-Is
        USED YODER ROLLFORMER GEARBOX MODEL M1-1/2, Stock# 10897
        $RFQ
        USED YODER ROLLFORMER GEARBOX MODEL M1-1/2, Stock# 10897
        Brand: YoderModel: M1-1/2Used gearbox for a Yoder model M1-1/2 rollformer1-1/2" shaft diameter8" roll spaceSold As-Is
        3 USED YODER OUTBOARD SUPPORTS FOR A MODEL M1-1/2, Stock# 10892
        $RFQ
        3 USED YODER OUTBOARD SUPPORTS FOR A MODEL M1-1/2, Stock# 10892
        Brand: YoderModel: M1-1/23 Used outboard supports for a Yoder rollformer model M1-1/2$1,500 per support Sold As-Is
        USED 12 STAND CONTOUR MODEL 201210 ROLL FORMER, Stock# 10884
        $RFQ
        USED 12 STAND CONTOUR MODEL 201210 ROLL FORMER, Stock# 10884
        Number of Stands 12 Power 20 horsepower
        USED ARDCOR 14 STAND ROLL FORMER MODEL 1F, Stock No. 10684
        $RFQ
        USED ARDCOR 14 STAND ROLL FORMER MODEL 1F, Stock No. 10684
        Number of Stands 14 Diameter of Arbor 1.
        Used 5 STAND ROLL FORMER, Stock No. 8616
        $RFQ
        Used 5 STAND ROLL FORMER, Stock No. 8616
        Number of Stands 5 Diameter of Arbor 1 i
        Used 5 STAND ROLL FORMER, Stock No. 8615
        $RFQ
        Used 5 STAND ROLL FORMER, Stock No. 8615
        Number of Stands 5 Diameter of Arbor 1 i
        14 Stand x 2" x 15" TISHKEN Rollformer
        $RFQ
        14 Stand x 2" x 15" TISHKEN Rollformer
        Stock #4011 Manufacturer: TISHKEN Model #4-MW-2 Number of Stands: 14 Pass w/6 Outboard Stands Spindle Diameter: 2" Roll Space: 15" Horizontal Centers: 12" Base to Center of Lower Spindle: 5" E
        • # Stands: #14
          18 Stand x 3-1/4" x 52" B & K Rollformer
          $RFQ
          18 Stand x 3-1/4" x 52" B & K Rollformer
          UTUBE NUMBER: 3981 MANUFACTURER: B & K MODEL NUMBER: SERIAL NUMBER: SPECIFICATIONS: Number of Stands: 18 Roll Shaft Diameter: 3-1/4″ Roll Space: 52″ Horizontal Centers: First (10) Stands – 16″, Last (8) Sta
          • # Stands: #18
          • Roll diameter: 3.25"
            New 11.8″ (300 mm) ERWTech/UCG Rolling Mill
            $RFQ
            New 11.8″ (300 mm) ERWTech/UCG Rolling Mill
            Stock #3926 Year: 2021 Maximum Strip Width: 11.8″ (300 mm) Maximum Thickness to be Reduced: .118″ (3 mm) Equipped With: Two (2) Motors, 2HP (1.5KW) each Location: Universal Warehouse, Perrysburg, Ohio
            ASC SU4-4-50-14
            $35,000
            ASC SU4-4-50-14
            Complete AG / Tuff rib panel line. 14pass, 4" shaft x 50" R.S., hydraulic post cut flying shear, cnc 500 controller, gearhead drive system, 40 hp vari-speed. Priced to sell asap $35,000.00
            • # Stands: #14
              ASC SU4-4-50-14
              $35,000
              ASC SU4-4-50-14
              Complete AG / Tuff rib panel line. 14pass, 4" shaft x 50" R.S., hydraulic post cut flying shear, cnc 500 controller, gearhead drive system, 40 hp vari-speed. Priced to sell asap $35,000.00
              • # Stands: #14
                ASC SU4-4-50-14
                $35,000
                ASC SU4-4-50-14
                Complete AG / Tuff rib panel line. 14pass, 4" shaft x 50" R.S., hydraulic post cut flying shear, cnc 500 controller, gearhead drive system, 40 hp vari-speed. Priced to sell asap $35,000.00
                • # Stands: #14
                  ASC SU4-4-50-14
                  $35,000
                  ASC SU4-4-50-14
                  Complete AG / Tuff rib panel line. 14pass, 4" shaft x 50" R.S., hydraulic post cut flying shear, cnc 500 controller, gearhead drive system, 40 hp vari-speed. Priced to sell asap $35,000.00
                  • # Stands: #14
                    ASC SU4-4-50-14
                    $35,000
                    ASC SU4-4-50-14
                    Complete AG / Tuff rib panel line. 14pass, 4" shaft x 50" R.S., hydraulic post cut flying shear, cnc 500 controller, gearhead drive system, 40 hp vari-speed. Priced to sell asap $35,000.00
                    • # Stands: #14
                      20-26 Ga Engel Duplex Roll Former (8 Stand), Mdl. 800, #A6547
                      $4,950
                      20-26 Ga Engel Duplex Roll Former (8 Stand), Mdl. 800, #A6547
                      Capacity 20-26 gauge Depth of Pocket / Size For Slip 1-1/16" Depth of Pocket / Size For Drive 1-1/8" Speed 90 feet per minute Motor / Voltage 5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM. Dime
                      9 Stand x 22 Ga. Used Lockformer, Mdl. , #A6247
                      $3,450
                      9 Stand x 22 Ga. Used Lockformer, Mdl. , #A6247
                      Capacity 22 GA. Stands 9 Stands Forming Speed 100 FPM Voltage Single Phase WEIGHT 750 Lbs. Wheels Single Phase
                      Lion cleatbender ROLL FORMER
                      $RFQ
                      Lion cleatbender ROLL FORMER
                        LION MODEL 20 APC CLEATFOLDER MODEL 20      S/N 237   CAPACITY ................................... 20 GA.   FOR MORE INFORMATION: Call Mike at 973-497-7540
                      Lockformer Cleatformer 22 Ga. ROLL FORMER
                      $3,950
                      Lockformer Cleatformer 22 Ga. ROLL FORMER
                        LOCKFORMER ROLLFORMING MACHINE MODEL CLEATFORMER     S/N 7046   NUMBER OF STATIONS .......................... 9 CAPACITY .................................... 22-28 GA. PITCHLINE SPEE
                      Lockformer SUPER SPEED 20 ROLL FORMER
                      $5,450
                      Lockformer SUPER SPEED 20 ROLL FORMER
                        LOCKFORMER SUPER SPEED 20 ROLLFORMER MODEL SUPER SPEED 20     S/N SS-3140   CAPACITY .............................. 20-26 GA. USING 1" MATERIAL DEPTH OF POCKET ..................
                      Lockformer NOTCHER ROLL FORMER
                      $5,450
                      Lockformer NOTCHER ROLL FORMER
                        LOCKFORMER TRANVERSE DUCT NOTCHER   CAPACITY .................................... 18 GAUGE NOTCHING HEADS .............................. 5 DEPTH OF NOTCH .............................. VARIABLE MOTOR ..
                      8-Stand Hat & Z-Channel Rollforming Line, Decoiler & Cutoff Press
                      $19,500
                      8-Stand Hat & Z-Channel Rollforming Line, Decoiler & Cutoff Press
                      . We are pleased to offer for your consideration: (1) 8-Stand Hat & Z-Channel Rollforming Line Stock Number: 13596 List Price: $25,000 Discounted Price; $19,500 Decoiler: American Steel Line ... Decoile
                      • # Stands: #8
                      • Roll diameter: 2"
                        Lubow Model AR 250 Ring Roller
                        $RFQ
                        Lubow Model AR 250 Ring Roller
                        No description providedWire Diameter RangeUp to 1/4" Diameter Ring Diameter1" Min. Outside Dia. x 36" Outside Dia. Max. OutputUp to 150 Cuts Per Minute Feed AccuracyPlus or Minus .005" Per 12" Wire Length Approx. Floor S
                        Single Level R Panel Line Used
                        $RFQ
                        Single Level R Panel Line Used
                        ( The Bradbury Group ) Used Single Level Rollforming Line Included in Purchase Coil Car Uncoiler Single Level Rollformer R/PBR Drop Table All Electrical and Hydraulic Components Programmable Controller Ant
                        • # Stands: #14
                          Lubow AR-250 Ring Roller
                          $RFQ
                          Lubow AR-250 Ring Roller
                          No description providedWire Diameter RangeUp to 1/4" Diameter Ring Diameter1" Min. Outside Dia. x 36" Outside Dia. Max. OutputUp to 150 Cuts Per Minute Feed AccuracyPlus or Minus .005" Per 12" Wire Length Approx. Floor S
                          20 Stand x 1-1/2″ x 8″ TISHKEN #20HM1-1/2 Rollformer
                          $RFQ
                          20 Stand x 1-1/2″ x 8″ TISHKEN #20HM1-1/2 Rollformer
                          Serial #15212A-11-73 Direction: R-L Stands: 20 Spindle Diameter: 1-1/2" Roll Space: 8" Horizontal Center: 9" Vertical Adjustment: 4-1/2" – 5-1/2" Base to Center Line of Lower Spindle: 4-1/
                          • # Stands: #20
                          • Roll diameter: 1.5"
                            16 Stand x 2" x 8" TISHKEN #16MW2 Rollformer
                            $RFQ
                            16 Stand x 2" x 8" TISHKEN #16MW2 Rollformer
                            Stock #3853 Serial #7629-557 Direction: R-L Spindle Diameter: 2" Roll Space: 8" Horizontal Center: 12" Adjustment: 5-1/2" - 7" Base Top to Center Lower Spindles: 5" Spindle Key Size:
                            • # Stands: #16
                              Morgardshammer 22" 3-Hi Rev. Bar Rolling Mill w/Roller Bearings
                              $RFQ
                              Morgardshammer 22" 3-Hi Rev. Bar Rolling Mill w/Roller Bearings
                              This 3-Hi Reversing Mill is designed to run production on Exotic Metals such as Nickel Based Alloy Bar. It is equipped with Spherical Roller Bearings and Tilt Table on both the Entry and Exit areas of the Mill. It wil
                              157.4" dia x 39.4" high HBE PRESS Radial Axial Ring Rolling Mill
                              $RFQ
                              157.4" dia x 39.4" high HBE PRESS Radial Axial Ring Rolling Mill
                              Max Ring diameter - 4,000 mm Max Ring Height - 1,000 mm Radial force - 250 tonnes Axial force - 200 tonnes Minimum Ring diameter - 400 mm Minimum Ring Height - 100 mm Main Roll diameter - 820 mm
                              16 Stand x 2" x 10" DREISTERN Rollformer
                              $RFQ
                              16 Stand x 2" x 10" DREISTERN Rollformer
                              Model #29333-41 Serial #87039 Direction: R-L Spindle Dia: 2" Roll Space: 10" Horizontal Center: 13" Vertical Adjustment: 4" - 8" Base Top to Center Lower Spindles: 8" Spindle Key Siz
                              10 Stand x 1-1/2" x 37" BRADBURY Duplex Rollform Line
                              $RFQ
                              10 Stand x 1-1/2" x 37" BRADBURY Duplex Rollform Line
                              Stock #3724 Model #130 Serial #35256 Maximum Blank Width: 37″ Horizontal Center Distance: 7″ Shaft Diameter 1-1/2″ Roll Space: 3″ Forward and Reverse Jogging Anti-Friction Bearings Capacity: 20,000 Lbs Coil ID:
                              • # Stands: #10
                              • Roll diameter: 1.5"
                                Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
                                $RFQ
                                Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
                                Will sell individual stands, roller bearings, spare rolls, chocks and bearings
                                32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
                                $RFQ
                                32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
                                1966 Blaw Knox reversing 2-Hi rolling mill complete with manipulators, front & back roller tables, crop shear, down coiler
                                7 Stands Yoder M1.5 ROLL FORMER, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY
                                $29,500
                                7 Stands Yoder M1.5 ROLL FORMER, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY
                                  7 STAND YODER M1.5 ROLL FORMING LINE   CURRENTLY TOOLED FOR CABINET RACK INDUSTRY   CONSISTING OF:   2500 LBS LITTEL UNCOILER CAPACITY - 2500 LBS WIDTH - 12" ID RANGE - 16"-20
                                Bradbury - ASC C & Z Purlin Roll Forming Line
                                $RFQ
                                Bradbury - ASC C & Z Purlin Roll Forming Line
                                Make: Bradbury / ASC Product: C & Z Purlin Size: 4" - 12" Web / 2" - 4" Flanges Roll Former: Bradbury DTR Side - Side Purlin Auto Web Change with ProScale Material: 55 grade 16g - 22g S
                                16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
                                $44,000
                                16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
                                Stock #2709 Model #315-B Serial #32646 Year: 1997 Direction: L-R Stands: 16 Spindle Dia: 2.5" Roll Space: 24" Vertical Adj: 4" – 5.5" Horizontal Centers: 9" Center Line of Lower Spindle to Base: 4"
                                • # Stands: #16
                                • Roll diameter: 2.5"
                                  23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                                  $59,000
                                  23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                                  Stock #3364 Model #F15-2-1/2-48 Serial #83-088 Year: 1983 Direction: R-L Stands: 23 on a 24 Stand Base Spindle Dia: 2.5" Roll Space: 48" Horizontal Center: 16" Vertical Adjustment: 5"– 9" Base Top to Center Low
                                  • # Stands: #23
                                  • Roll diameter: 2.5"
                                    Lubow Wire Ring Roller Model AR 250 D
                                    $RFQ
                                    Lubow Wire Ring Roller Model AR 250 D
                                    No description providedMaximum Wire Diameter.250" Maximum Ring Diameter36" Minimum Ring Diameter1" Maximum Speed9000 4" Rings Per Hour Maximum Cuts Per Minute150 Feed Accuracy+/- .005"
                                    10 Stand x 3″ x 54″ BRADBURY M3 Ribbed Panel Rollform Line, ON SALE $45,000
                                    $45,000
                                    10 Stand x 3″ x 54″ BRADBURY M3 Ribbed Panel Rollform Line, ON SALE $45,000
                                    Stock #2910 Model #M3 Stands: 10 Direction: R-L Spindle Dia: 3" Roll Space: 54" Horizontal Center: 16" Vertical Adjustment: 9" - 10" Base to Center Lower Spindle: 7-3/8" Spindle Key Size: .5" Equipped
                                    • # Stands: #10
                                      24ga TIN KNOCKER Pittsburgh Rollformer w/Stand & Flanger Attachment
                                      $RFQ
                                      24ga TIN KNOCKER Pittsburgh Rollformer w/Stand & Flanger Attachment
                                      CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Portable rollformer is a work horse for 24 gauge and lighter material. It is available with power flanging attachment and is perfect for field use. With t
                                      $7,950! 10 Stand TISHKEN Rollformer w/Punch & Cut-Off Press
                                      $7,950
                                      $7,950! 10 Stand TISHKEN Rollformer w/Punch & Cut-Off Press
                                      Model #10-4-1-1 Serial #540-640 Stands: 10 Direction: R-L Spindle Dia: 1" Roll Space: 3.5" Horizontal Center: 4.5" Vertical Adjustment: 2.75" - 3.75" Base Top to Center Lower Spindle: 3.25" Spindle Key Size: .2
                                      • # Stands: #10
                                      • Roll diameter: 1"
                                        Lockformer #L-810, rollformer, 10 stand x 1-3/8" x 12
                                        $RFQ
                                        Lockformer #L-810, rollformer, 10 stand x 1-3/8" x 12
                                        Serial #2424 Direction: R-L Roll Shaft Diameter: 1-3/8" Roll Space: 12" Center, 3.5" Outside Horizontal Centers: 8" Vertical Center: 5" Base Top to Center Lower Shaft: 7.5" Shaft Keyway Size: .2
                                        • # Stands: #10
                                          12 Stand, Tishken #12-M2-2, rollformer, 2" x 6
                                          $RFQ
                                          12 Stand, Tishken #12-M2-2, rollformer, 2" x 6
                                          Serial #333-938 Line Direction: L-R Stands: 12 Spindle Dia: 2" Roll Space: 6" Horizontal Center: 11" Vertical Adjustment: 5"-7" Base Top to Center Lower Spindle: 4.5" Spindle Key Size: 3/8" Gearing: Equal NOT
                                          14 Stand x 1-1/2" x 6" TISHKEN #14-HMW-1-1/2 Rollformer
                                          $RFQ
                                          14 Stand x 1-1/2" x 6" TISHKEN #14-HMW-1-1/2 Rollformer
                                          Serial #553-5161 Direction: R-L Spindle Dia: 1.5" Roll Space: 6" Horizontal Center: 9" Vertical Adjustment: 4.5"–5.5" Base Top to Center Lower Spindle: 4.5" Spindle Key Size: .25" Line Speed: 100 FPM Maximum Thi
                                          15 Stand x 1.25" x 11" B&K/MV Rollforming Line
                                          $RFQ
                                          15 Stand x 1.25" x 11" B&K/MV Rollforming Line
                                          Stands: 15 Direction: R-L Spindle Diameter: 1.25" Roll Space: 11" Horizontal Center: 12" Vertical Adjustment: 3.5"-5" Base to Center Lower Spindles: 3.5" Base Working Surface: 26.5" Base Coolant Trough: 31.5" St
                                          12 Stand x 1.25" ENGEL Rollformer
                                          $RFQ
                                          12 Stand x 1.25" ENGEL Rollformer
                                          Material Thickness: 19–22 ga. Stands: 12 Roll Shaft Diameter: 1-1/4" Shaft Keyway Size: 1/4" Roll Space: 4-1/8" & 4-3/8" Horizontal Centers: 6" Vertical Centers: 4" Base Top to Center Lower Shaft: 4-3/4" Directio
                                          9 Stand x 2.5"" KANE & ROACH #579 Rollformer
                                          $RFQ
                                          9 Stand x 2.5"" KANE & ROACH #579 Rollformer
                                          Serial #8565 Stands: 9 Direction: R-L Spindle Diameter: 2-1/2" Roll Space: 33" Horizontal Center: 15" Vertical Adjustment: 5"–8" Base Top to Center Lower Spindle: 6-1/4" Spindle Key Size: 5/8" EQUIPPED WITH:
                                          12 Stand x 3" ASC #CAS-4-36-12 Rollformer, $59,000
                                          $59,000
                                          12 Stand x 3" ASC #CAS-4-36-12 Rollformer, $59,000
                                          Serial #15072.000 Direction: R-L Spindle Dia: 3" Roll Space: 36" Horizontal Center: 18" Vertical Adjustment: 6"–9" Base Top to Center Lower Spindle: 7-5/8" Spindle Key Size: 1/2" EQUIPPED WITH: Entry Guide To
                                          10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                                          $RFQ
                                          10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                                          Serial #SO-1383 Stands: 10 Direction: R-L Roll Shaft Dia: 1.125" Roll Space: 6" Center, 2.5" Outsides Horizontal Centers: 6" Vertical Center: 3.5" Base to Lower Shaft: 3.25" Shaft Keyway Size: .25" Capacity: 20
                                          28 Stands Tishken Duplex Roll Former
                                          $RFQ
                                          28 Stands Tishken Duplex Roll Former
                                          Make: Tishken Year New: 1996 Serial # 21490 Number of Stands: 28 Spindle Diameter: 3" Maximum Material Thickness: .148" Roll Space: 30" - 40" Upper Spindle Adjustment: 6.5" - 8-3/8&quo
                                          • # Stands: #28
                                          • Roll diameter: 3"
                                            14 Stand BRADBURY Roll Former, $69,500
                                            $69,500
                                            14 Stand BRADBURY Roll Former, $69,500
                                            Model #415RF Serial #21086 Year: 1990 Driven Stands: 14 Spindle Dia.: 2.5" Roll Space: 42" Vertical Adjustment: 4"- 7.25" Horizontal Centers: 13.5" Center Line of Lower Spindle to Base: 6" Direction: L-R Equipp
                                            • # Stands: #14
                                            • Roll diameter: 2.5"
                                              SJP 16 pass Corrugated Panel
                                              $RFQ
                                              SJP 16 pass Corrugated Panel
                                              7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                              • # Stands: #16
                                                SJP 16 pass Corrugated Panel
                                                $RFQ
                                                SJP 16 pass Corrugated Panel
                                                7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                                • # Stands: #16
                                                  SJP 16 pass Corrugated Panel
                                                  $RFQ
                                                  SJP 16 pass Corrugated Panel
                                                  7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                                  • # Stands: #16
                                                    LOCKFORMER MODEL 22 PITTSBURGH ROLLFORMER, 22 GAUGE
                                                    $1,950
                                                    LOCKFORMER MODEL 22 PITTSBURGH ROLLFORMER, 22 GAUGE
                                                    SPECIFICATIONS CAPACITY: 22 GAUGE DEPTH OF POCKET: 5/16” SPEED: 25 FPM GENERAL DIMENSIONS: 3’ LR X 1’6" FB X 3’6” H ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH POWER FLANGER ATTACHMENT
                                                    Dexter 4 Stand Roll Former
                                                    $RFQ
                                                    Dexter 4 Stand Roll Former
                                                    Dexter 4 Stand Roll Former S/N: R-3111, Stock No: 17957 Diameter Shafts: 2.125" Roll Space: 5" Horizontal Centers: 9" Vertical Adjustment: 2" Currently Tooled for 15" Corvette Wheel Trim
                                                    • # Stands: #4
                                                    • Roll diameter: 2.125"
                                                      Sendzimir ZR 23-37 Reversing Cold Rolling Mill
                                                      $RFQ
                                                      Sendzimir ZR 23-37 Reversing Cold Rolling Mill
                                                      Make: Sendzimir Model: ZR-23-37 Material Type: Stainless Steel, High Carbon, Brass Mill Direction: Reversing Material Width: 18.5" (470mm) - 37" (940mm) Coil ID: 20" (508mm) - 24" (610mm) Co
                                                      Lockformer Roll Form Line
                                                      $RFQ
                                                      Lockformer Roll Form Line
                                                      Used Lockformer Roll Form Line S/N: Unk, Mfg: 1999, Stock No: 17973 Number of Stands: 14 Number of Passes: 10 Roll Space: 12" Shaft Size: 1.5" Vertical Centers: 4" Vertical Adjustment: .5" Hor
                                                      • # Stands: #14
                                                      • Roll diameter: 1.5"
                                                        16 B&K Gearboxes and Outboards (Spares)
                                                        $2,500
                                                        16 B&K Gearboxes and Outboards (Spares)
                                                        16 B&K Gearboxes and Outboards, Stock# 2944 SPECIFICATIONS: (Per Gearbox) Spindle Diameter: 1-1/2" Roll Space: 12" Spindle Key Size: 1/4" Base Top to Center Lower Spindle: 7-1/4" Vertical Adjustment: 4-1/2" - 7-1
                                                        • # Stands: #1
                                                        • Roll diameter: 1.5"
                                                          YODER M2 Gearbox and Outboard Castings
                                                          $RFQ
                                                          YODER M2 Gearbox and Outboard Castings
                                                          419-872-2364 / [email protected] YODER M2 Gearbox and Outboard Castings, Stock# 2396 SPECIFICATIONS: (9) YODER M2 Standard Gearbox Castings (Old Style) (11) YODER M2 Outboard Stand Castings (Old Style) Cap
                                                          • # Stands: #11
                                                            Related Subcategories:
                                                            Categories:
                                                            Condition:
                                                            Manufacturer:
                                                            Location:
                                                            Price:
                                                            •  to 
                                                            1 | 2 | 3 | 4