buy & sell, new & used machinery, machine tools & equipment

24 new & used bar & rod mill items for sale
1 | 2
Refine: Viewing 1 - 20 of 24 matches
Sort by:
Items Per Page:  20  |  50 |  100
WATERBURY FARREL, 8 STAND TANDEM, CROSS HEAD ROD MILL (13880)
(1) Used Waterbury Farrel 8 Stand Tandem Cross Head Rod Mill (13880) Machine: 13880 Manufacturer: Waterbury Farrel USA Type Mill: Cross Head Rod Reduction Mill Number of Stands:
Morgardshammer 22" 3-Hi Rev. Bar Rolling Mill w/Roller Bearings
This 3-Hi Reversing Mill is designed to run production on Exotic Metals such as Nickel Based Alloy Bar. It is equipped with Spherical Roller Bearings and Tilt Table on both the Entry and Exit areas of the Mill. It wil
SIMAC SECTION ROLLING MILL 3 VERTICAL 3 HORIZONTAL STANDS (13731)
MACHINE 13731 One used 350,000 TPY MORGAN STRAIGHT LINE ROD ROLLING MILL (13731) TYPE MILL: 350,000 TPY MORGAN STRAIGHT LINE ROD MILL MANUFACTURER: MORGAN CONSTRUCTION, USA SIMAC SMS-SIEM
220,000 TPY, WIRE ROD AND REBAR MILL (13747)
MACHINE# 13747 SPECIFICATIONS: 220,000 TPY (Tons Per Year) WIRE ROD MILL WITH 2 NO-TWIST FINISHING TRAINS Age: 1980 - Operating until end of 2015. Plant is Still Fully Installed. Features: Roller Bearing Rougher and Inte
500,000 TPY, DANIELI-MORGARDSHAMMAR, REBAR MILL, NEW 2015 (13750)
MACHINE #13750 SPECIFICATIONS: MANUFACTURER: DANIELI-MORGARDSHAMMAR YEAR OF MANUFACTURE: 2015 Output 500.000 Metric Tons Per Year Dimensions: 330 meters x 23 meters (1082 Ft. x 75 Ft.) Feedstock 160 mm x 160 mm Billets (
SUMITOMO, 32 STAND ROD MILL FOR STAINLESS 5.5mm-1.2mm (.216"- .048") (13357)
MACHINE# 13357 GENERAL SPECIFICATIONS: Make: Sumitomo (Japan) Year: 1996 Material: SUS304, SUS440, SUS303Cu Inlet Diameter: Stainless Steel 5.5 mm (0.216") (For Tensile Strength: 70kg/mm2 below) Outlet Diameter: Minimum
12" (305mm) x 36" (914mm) W., STANDARD, 2-HI ROD MILL, (12947)
MACHINE# 12947 SPECIFICATIONS: MANUFACTURER: STANDARD MACHINERY CO. (USA) TYPE: 2-HI ROD MILL WITH GROOVED ROLLS DIRECTION OF TRAVEL: REVERSING ROLL SIZE: 12" (305m
12" (305mm) x 28" (712mm) W., STANDARD, 2-HI ROD MILL, (12946)
MACHINE# 12946 SPECIFICATIONS: MANUFACTURER: STANDARD MACHINERY CO. (USA) TYPE: 2-HI ROD MILL WITH GROOVED ROLLS DIRECTION OF TRAVEL: REVERSING ROLL SIZE: 12" (305m
5" (127mm) x 9" (228mm) W., STANDARD, 2-HI ROD MILL, (12945)
MACHINE# 12945 SPECIFICATIONS: MANUFACTURER: STANDARD MACHINERY CO. (USA) SERIAL No.: 524553 TYPE: 2-HI REVERSING ROD MILL WITH GROOVED ROLLS ROLL SIZE: 5"
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL Line Components: Melting Furnace Holding Furnace Inline Degassing Unit Tundish Casting Wheel - Properzir Model 7C Casting Wheel Sensor Arm Shear Pinch Roll
8" (203mm) x 10" (254mm) W., LOMA, MODEL 1000, ROD/FLAT PRODUCT MILL (12428)
MACHINE # 12428 Manufacturer Loma Model 1000 SPECIFICATIONS Work Roll Diameter 8 1/2" (216mm) Work Roll face 10" (254mm) Rolling Speed Variable Dimensions- Machine (L x W x H) 110" (2794mm) x 52" 1320mm x 100" (2540mm)
6" (152mm) x 12" (304mm) W., STANDARD, 2-HI, .875" TO .040" MOD. SQUAR
MACHINE #12650 SPECIFICATIONS -MANUFACTURER: STANDARD MACHINERY COMPANY -TYPE: 2-HI ROD MILL -GROOVE SIZE RANGE: .875" TO .040" -GROOVE (REDUCTION) TYPE: MODIFIED ROUND CORNER
4" (101mm) x 8" (203mm) W., FIOA 2-HI ROD MILL, .325"- .040" MOD. SQUA
MACHINE #12651 SPECIFICATIONS -MANUFACTURER: FIOA -TYPE: 2 HI ROD MILL -GROOVE SIZE RANGE: .325" TO .040" -GROOVE (REDUCTION) TYPE: MODIFIED ROUND CORNER SQUARE -DRIVE MOTOR:
STANDARD, 6 STAND TANDEM WIRE ROD .425"-.110" (10mm-2mm) Cap., 3 GROOOVE (12637)
MACHINE 12637 MANUFACTURER: STANDARD/FENN MANUFACTURING TYPE MILL: 6 STAND TANDEM WIRE ROD MILL CAPACITY: 0.425" (10.795mm) MAXIMUM - 0.110" (2.794mm) MINIMUM GROOVES PER ROLL" 3 DRIVE MOTOR: 20 hp 480 VOLTS **PRICE QUOT
24 STANDS LAGUN-ARTEA BAR MILL
Year:2008 Production Capacity: 500,000 Tons / Year. Reheating Furnace: 90 Ton / H. Mill Arrangement: Horizontal/Vertical Billet Size: 130 X 130/140 X 140/160 X 160 X 12000 mm Finished Products:8 - 32mm Round &
DANIELI STEEL MILL FOR BAR AND REBAR
Production Capacity:650,000 Ton (1995) EAF Melting Furnace:120 Ton 6 Strand Continuous Casting Reheat Furnace (2) Bar Mill Danieli 11 Stand Lagun-Artea 24 Stand Dual Path DANIELI DC ELECTRIC FURNACE Shell D
11 STANDS DANIELI BAR MILL
Year: 1995 Production Capacity: 270,000 Tons / Year. Reheating Furnace: 50 Ton / H. Mill Arrangement: Horizontal Billet Size:120 X 120 / 130x130 / 140x140 / 130x190 X 6000 Mm Finished Products: 10mm to 32mm Roun
HOT ROLLING MILL PLANT FOR ROUND BAR (12311)
MACHINE# 12311 SPECIFICATIONS: HOT ROLLING MILL PLANT FOR ROUND BAR: Production capacity: 45 tons/hour 1. BILLET SIZE: 160mm x 160mm x 3m-4m Long (6.3" x 6.3" x 10-13 Ft.) 120mm x 120mm x 3m-4m Long (4.7" x 4.7" x 10-13
MELT SHOP FOR BAR PROCESSING
(1) 25TON E.A.F. U-Car design (1995) spray cooled sheel & roof 14" Electrodes - Hydraulic Masts ABB transformer - 18 MVA 12 ft. diameter shell 2 spares refractory roofs (1) A.O.D. VESSEL IRS (Intelligent Re
COMPLETE MELT, CAST AND BAR ROLLING MILL PLANT
A) Each Electrical Arc Furnace Manufacturer:..........Kishida Japan Year of Make:...............1981 Production capacity:........... 275,000T/Y Type of pouring:............. Tilt (Inclined system) Diameter of the
Categories:
  • X machine tools (24)
  • X Rolling Mills & Ring Formers (24)
  • X Bar & Rod Mills (24)
Condition:
Price:
  •  to 
1 | 2