buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Wire Machinery

Wire Machinery for Sale

538 new & used wire machinery items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 81 - 100 of 538 matches
Sort by:
Items Per Page:  20  |  50 |  100
POLYESTER-GLASS YARN WRAPPING VARNISH COATING MACHINE (13755)
MACHINE 13755 POLYESTER-GLASS YARN WRAPPING MACHINE Type: Copper wire wrapping Line for Copper Wire PG (Polyester-Glass Yarn Covered) Wrapping, Varnish Coating, Heating (Varnish Dry) Cooling Winding Industry: Copper rod
(3) WIRE INSULATION WRAPPING MACHINE, KOREA YOSHIDA,(13754)
MACHINE 13754 DOUBLE-GLASS YARN ENAMELED FLAT/ROUND WIRE COPPER WRAPPING MACHINE Type: Copper wire wrapping Industry: Electrical conductive manufacturing equipment Manufacturer: Korea Yoshida Ind. Co. Year of manufacture
No. TGD, LKI, 8 DIE, WIRE DRAWER, .118" (3mm) - .013" (.35mm) (13752)
MACHINE #13752 Manufacturer: LKI France Model: TGD Type: 8 Die Wire Draw Main drive: 15 HP with electric brake, 1180 RPM Maximum incoming wire size: 3mm (0.118") Minimum output wire size: 0.35mm (0.013") Maximum wire out
No. IM-15, COOK, 13 DIE, WIRE DRAWER, .125" (3.175mm) - .005" (.127mm) (13753)
MACHINE #13753 MANUFACTURER: COOK MACHINERY CO. (U.S.A.) MODEL: IM-15 TYPE: CONE TYPE WET WIRE DRAWER No. OF DIES: 13 MAXIMUM ENTRY DIA.: .125" (3.175mm) MINIMUM EXIT DIA.: .005" (.127mm) No. OF CONES: 4 STEPPED CONES DR
OMCG 2D CNC Wire Former
No description providedDiameterfrom 2 to 8mm 600 N/mm2 tensile Feeding Axisfrom 0 mm to infinite Feed Accuracy+/- 0.10mm Feed Speedup to 1380 mm/sec Axes2 w/simultaneous motion or by interpolation Electrics460/3/60 Appro
Vitari Model V20R Nail Header
No description providedWire Diameter Range.087" - .174" Nail Length1.18" - 4.13" Production420 NPM
RMG Wire Drawer
No description provided
Snag Detector Heavy Duty
With Extra Ring
Lubow ML-10 Single Stop Table Bender
No description providedCapacity8 Pieces 1/4" Wire Capacity5 Pieces 3/8" Wire Rotation400 Degree Rotation Table Area2' x 6' Infinitely Adjustable Bending Post Position,
Schenker KA-1B Staple Machine
No description providedWire Diameter1 Wire .016" - .032" Wire Diameter2 Wires .016" - .024" Maximum Wire LengthUp to 1.6" Leg LengthUp to .60" Shoulder WidthUp to .60" Wire Feeds2 Output Per MinuteUp to 1100 Pieces Lengt
Nilson S-3 Fourslide
No description providedStandard Feed Length15" Strokes Per Minute32 - 130 Motor3 HP Approx. Floor Size79" L x 62" W Wire Diameter3/16" Maximum Strip Width1-5/8" With 2
Pneumatic Wire Bender
No description providedRotating Disc12" Diameter Table Size21" x 95" Foot Pedal
RMG Double End Saddle Rod Flipper CC 6500
No description providedArm Length96" Base Dimensions8' x 8' Wire Diameter Range.218" - .625" Coil Width60" Coil weight is not a limiting factor. Flipper is designed to
HIC, VAUGHN, 0.105" (2.7mm), Finish Capstan 12" finish hi carbon 0.317" (13
MACHINE 13718 Vaughn Model HIC Finish Capstan 12 inch Enter .105" (2.667mm) low carbon, Finish .0475" (1.2mm) Enter .080" (2mm) high carbon, Finish .0317" (0.8mm) Speed 3000 fpm There is motor no controls and no spooler.
0.080" (2mm) - 0.0226" COULTER MCKENZIE, 8 DRAFT WET TYPE WIRE DRAWER (13716)
MACHINE 13716 Coulter McKenzie Wire Drawer Model 116925 8 draft 14" Block 12" High 40 HP 480 volt 60 Amp Self Contained: 100 gal tank with coolant sump pump Finish Die Cast and helix adjuster .080 (2mm) start .0285 (0.7
22" (559mm), BARRON & CROWTHER, SINGLE DIE BULL BLOCK (13719)
MACHINE# 13719 SPECIFICATIONS: MANUFACTURER: BARRON AND CROWTHER (U.K.) LTD. TYPE: SINGLE DIE VERTICAL WIRE DRAWING BLOCK BLOCK DIAMETER: 22" (558mm) AT BASE; 21" (533mm) AT TOP BLOCK HEIGHT:
PRATTO STARWELD PE Mesh Welding Line
Starweld PE STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high quality, even
PRATTO STARWELD PE Mesh Welding Line
Starweld PE STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high qu
Bueltmann Internal Grip Tube Draw Bench Carriage
Drop in replacement for the original carriage for drawing aluminum and copper tubing. ELIMINATES THE NEED FOR POINTING TUBES BEFORE DRAWING. Customizable and compatible with most draw bench makes and models (e.g., Aetn
  • Pulling force: 150000Lb
    44000 lb. Roundo #L-4-OC-1938, welding positioner, 1984, #C5168
    no description provided
    Related Subcategories:
    Condition:
    Price:
    •  to 
    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>