buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Tube & Pipe Machinery > Used

Used Tube & Pipe Machines For Sale

249 used tube or pipe machine items for sale
1 | 2 | 3
Refine: Viewing 201 - 249 of 249 matches
Sort by:
Items Per Page:  20 |  50 |  100
MORGAN TUBE LEVEL WINDING LINE
$RFQ
MORGAN TUBE LEVEL WINDING LINE
SPECIFICATIONS: - RIGHT HAND - LINE SPEED 1,500 FPM MAXIMUM - TUBE SIZE .250" OUTSIDE DIAMETER TO .875" OUTSIDE DIAMETER - COIL WIDTH 11.5" TO 15.5" - COIL INSIDE DIAMETER 24" PRE-CAST
ITAM RIGHT HAND LEVEL COIL WINDING SYSTEM
$RFQ
ITAM RIGHT HAND LEVEL COIL WINDING SYSTEM
Basket Type 24" ID, 48" OD Tube Capacity: commonly ran 3/4" to 1" OD 25 HP Motor Rotating Dual Take-Up Mandrels 7-Roll Vertical Straightener 7-Roll Horizontal Straightener Rail Mounted Co
4" DIA. ACME CONDUIT THREADER
$RFQ
4" DIA. ACME CONDUIT THREADER
Length - 10' (Est.) Capacity - Currently set-up for 4" diameter tube (Est) O.A. Dim. 24' L x 6' W x 7' H Equipped with: Walking Beam Loader (2 Stations) Mounted Clamping Hydraulic Operated Heads (6) D
3" FENN MODEL #30-3 HYDRAULIC TUBE END FORMING MACHINE
$RFQ
3" FENN MODEL #30-3 HYDRAULIC TUBE END FORMING MACHINE
One Station Performs Two Jobs Clamp Pressure ....................... 57,000# Thrust (Ram) Presssure ............... 30,000# Work Stroke .......................... 0" - 4" Idle Pressure .....................
NCP TUBE LEVEL WIND LINE
$RFQ
NCP TUBE LEVEL WIND LINE
MANUFACTURER: NATIONAL COPPER CO. TYPE: LEVEL WIND LINE FOR TUBE MAXIMUM TUBE O.D. (AS USED): 7/8" (22mm) O.D. x .045" (1.2mm) WALL THICKNESS MINIMUM TUBE O.D. (AS USED): .312" (8mm) O.D. LINE SPE
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO VE
1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
$RFQ
1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
CAPACITY: MATERIAL - HARD DRAWN COPPER TUBING TUBE DIAMETER RANGE - 1/4" TO 1-1/8" MAXIMUM TUBE WALL THICKNESS - .015" MIN. TO .065" MAX. LINE SPEED - 0 TO 600 FPM ON 1/2" OR 5/8" DIAMET
6" HYDRO STATIC TESTER
$RFQ
6" HYDRO STATIC TESTER
GENERAL SPECIFICATIONS: OPERATION MODES ........... AUTOMATIC / MANUAL / PASS THROUGH PRODUCT SPECIFICATION ..... ASTM A53 MAXIMUM PRESSURE .......... 5,000 PSI MAXIMUM PIPE DIAMETER ..... 6.625"OD MINIMUM PI
SUTER ALPHA 1, HVAC EQUIPMENT SPIRAL TUBE FORMER
$RFQ
SUTER ALPHA 1, HVAC EQUIPMENT SPIRAL TUBE FORMER
SPECIFICATIONS: CAPACITY: 18 GA. - FOR DBL, END BEAD OR CORRUGATING COIL WIDTH: 2-1/2" - 6-1/2" WIDE WORK SPEED CONTROL: VARIABLE AUTOMATIC CUT-OFF SAW w/SEAM PRODUCING AND LOCKING FIXTURE SELF CONT.
4" (101mm) 19 STD SMS-MEER #SRDW300 STRETCH REDUCING MILL
$RFQ
4" (101mm) 19 STD SMS-MEER #SRDW300 STRETCH REDUCING MILL
Technical Specifications: Pipe Diameter Entry................ 101mm Reduction Diameter Capacity........ 3" to 3/8" (76mm to 10mm) 4" to 3/4" (100mm to 20mm) Wall Thickness..............
DSAW HEAVY GAUGE PIPE MAKING PLANT BY 3 ROLL BENDER
$RFQ
DSAW HEAVY GAUGE PIPE MAKING PLANT BY 3 ROLL BENDER
A.PRODUCT SIZE : LENGTH : 6 METER MAX WALL THICKNESS : 6- 45 MM PIPE DIA : 450 - 4500 MM B.EQUIPMENT LIST 1.CNC GAS CUTTING MACHINE BUILT : 1997 MAKER : KODAKI, JAPAN NO. OF TORCH BLOCK : 3 BLOCK ( 4 TORCH X 3
BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
$RFQ
BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
CAPACITY ............................... 3" CUT RUNOUT ............................. 48" STOCK TABLE ............................ 10' ROLLER FEED SPINDLE SPEEDS ......................... (52) 85 TO 1100 RPM
HAVEN #802 DOUBLE TUBE CUT-OFF MACHINE
$RFQ
HAVEN #802 DOUBLE TUBE CUT-OFF MACHINE
N E W 1 9 8 5 THIS MACHINE CUTS TWO TUBES AT ONCE, DIMPLE FREE BY THE DUAL BLADE CUTTING MACHINE RATED CAPACITY .................. 1/8" TO 3/8" DIAMETER RECOMMENDED FOR ................. .049"
HAVEN #802 DOUBLE TUBE CUT-OFF
$RFQ
HAVEN #802 DOUBLE TUBE CUT-OFF
N E W 1 9 8 5 THIS MACHINE CUTS "TWO" TUBES AT ONCE, DIMPLE FREE BY THE DUAL BLADE CUTTING METHOD RATED CAPACITY ..................... 1/8" TO 3/8" DIAMETER WALL THISKNESS ..................
1" X .065" PINES MODEL #M-04523 BENDER
$RFQ
1" X .065" PINES MODEL #M-04523 BENDER
TUBE SIZE RANGE OD ...................... UP TO 1" MAXIMUM CAPACITY STEEL TUBING ........... 1" OD x .065" WALL MAXIMUM BEND ANGLE - NORMAL TOOLING .... 140 MAXIMUM BEND ANGLE - SPECIAL TOOLING .... 16
2-1/4" x .065" PINES MODEL #25T VERTICAL TUBE BENDER
$RFQ
2-1/4" x .065" PINES MODEL #25T VERTICAL TUBE BENDER
ROUND TUBING CAPACITY: NON-FERROUS .............................. 2-1/4" x .125" MILD STEEL ............................... 2-1/4" x .065" STAINLESS ................................ 2" x .058&
1-1/2" x .072" PINES MODEL #5T VERTICAL TUBE BENDER
$RFQ
1-1/2" x .072" PINES MODEL #5T VERTICAL TUBE BENDER
Dial-A-Bend Up to 1-1/2" Diameter 1" Tooling 20 HP, 230/460 Volt, 3/60/1750 RPM Pedestal Control
2.5" American Electric Fusion ( AEF ) Tube Mill
$39,950
2.5" American Electric Fusion ( AEF ) Tube Mill
2.5" American Electric Fusion ( AEF ) Tube Mill Forming & sizing mills, additional components available. Item #11588 ....... $39,950
4", Knuth, No. RGM4, 0.5-4"cut range,8-22RPM,39x20x20"dimensions,330Lbs&quo
$RFQ
4", Knuth, No. RGM4, 0.5-4"cut range,8-22RPM,39x20x20"dimensions,330Lbs&quo
swpc(1,"http://uen.hsix.com/machpict/013510/560003.jpg")
Entry Guide / Trim Unit
$RFQ
Entry Guide / Trim Unit
SPECIFICATIONS: Hand of Operation: Right to Left Minimum Strip Width: 1" (25.4mm) Maximum Strip Width: 8" (203mm) Minimum Thickness: .020" (.508mm) Maximum Thickness: .095" (2.41mm) 5 Pass Slide Arrangement Consi
Torrington Vaill 511 Swager
$RFQ
Torrington Vaill 511 Swager
Torrington Vaill 511 Swager S/N: 511-94, Mfg. 1973, Stock No: 17530 Range: 1" to 5" OD Form Stroke: 0 to 1" Form Pressure: 0 to 15,000 Lbs. Form Speed: Adjustable Clamp Stroke: 3" Clamp Pressur
2.5″ x .095″ Yoder M-2 ERW Tube Mill
$RFQ
2.5″ x .095″ Yoder M-2 ERW Tube Mill
Make: Yoder, Model: M2, Tube Diameter: 1/2″ – 2.5″, Wall Thickness: .010″ – .095″, Shaft Diameter: 2″, Direction: Right to Left, Single Mandrel Uncoiler, Adjustable Edge Guides, Forming Mill with Seven (7) Forming Stands
8" IPS LEONARD (CONRAC) #M369 TUBE END FLANGING MACHINE
$RFQ
8" IPS LEONARD (CONRAC) #M369 TUBE END FLANGING MACHINE
8" IPS LEONARD (CONRAC) #M369 TUBE END FLANGING MACHINE S/N 84464-14 NEW 1978 CAPACITY, PIPE SCHEDULES 5, 10, 40 -------- FROM 1/2" TO 8" IPS CAPACITY, PIPE SC
  • Maximum diameter: 8"
    3" x 20' HAVEN Tube Bundle Feeder
    $RFQ
    3" x 20' HAVEN Tube Bundle Feeder
    UTUBE NUMBER: 2914 MANUFACTURER: HAVEN PRELIMINARY SPECIFICATIONS: Maximum Tube Diameter: 3" (76.2mm) Maximum Tube Length: 20' (6096mm) DIMENSIONS: 25' x 8' x 5' WEIGHT: 7,500 lbs.
    (USED) 8 5/8" HARLEY RECEDING DIE HEAD PIPE THREADER
    $RFQ
    (USED) 8 5/8" HARLEY RECEDING DIE HEAD PIPE THREADER
    STANDARD CAPACITY: 4 1/2" TO 8 5/8" WITH AUXILIARY HOLDERS: 2 1/2" TO 4 3/4" MAXIMUM THREAD LENGTH: 6" SPINDLE: 10.5 TO 28.3 RPM (8 STEPS) CARRIAGE TRAVEL: 24" MAIN MOTOR: 10 HP, 220/44
    • Maximum diameter: 8.625"
      HORSBURGH & SCOTT 2-Speed Gear Reducer
      $RFQ
      HORSBURGH & SCOTT 2-Speed Gear Reducer
      Contact us for details.
      FENN Tube Forming Machine
      $RFQ
      FENN Tube Forming Machine
      JUST PURCHASED. CONTACT US FOR DETAILS.
      3-1/2" DICKEY & SON P.D. & B Rotary Forming Machine
      $RFQ
      3-1/2" DICKEY & SON P.D. & B Rotary Forming Machine
      SPECIFICATIONS: Tube Capacity: 3/4" (19 mm) - 3-1/2" (88.9 mm) EQUIPPED WITH: Rotary Motor Hydraulic Pump & Motor Push Buttons & Electrical Panel Condition: Good as taken from service. CARE IS TAKEN TO GIV
      • Maximum diameter: 3.5"
        BUCKEYE #191-97020 Dedimpler & Deburring Machine
        $RFQ
        BUCKEYE #191-97020 Dedimpler & Deburring Machine
        SERIAL NUMBER: 0089 SPECIFICATIONS: Maximum O.D.: 3" Minimum O.D.: 1/2" Tube Length: 2' - 30' Brush Length: 24" Brush O.D.: 10" Dedimpler: 7/8" O.D. EQUIPPED WITH: Center Tube Support Electrical Panel (ne
        CUSTOM Brush Deburring Machine 3" OD x 120" Max.
        $RFQ
        CUSTOM Brush Deburring Machine 3" OD x 120" Max.
        SPECIFICATIONS: Tube Length: 6" - 120" (150 mm - 3,048 mm) Tube Diameter: 3/8" - 3.0" (10 mm - 76 mm) Bar Diameter: 3/8" - 2.4" (10mm - 60 mm) Profile Section: 3/8" x 3/8" to 2" x 2" (10 mm x 10 mm to 50 mm x 50 mm)
        BURRMASTER #1 Debur Machine 3" OD x 120" Max.
        $RFQ
        BURRMASTER #1 Debur Machine 3" OD x 120" Max.
        SPECIFICATIONS: Tube Length: 6" - 120" (150 mm - 3,048 mm) Tube Diameter: 3/8" - 3.0" (10 mm - 76 mm) Bar Diameter: 3/8" - 2.4" (10 mm - 60 mm) Profile Section: 3/8" x 3/8" to 2" x 2" (10 mm x 10 mm to 50 mm x 50 mm)
        BURRMASTER #1 Brush Deburring Machine 3" OD x 168" Max.
        $RFQ
        BURRMASTER #1 Brush Deburring Machine 3" OD x 168" Max.
        SPECIFICATIONS: Tube Length: 6" - 168" (150 mm - 4,267 mm) Tube Diameter: 3/8" - 3.0" (10 mm - 76 mm) Bar Diameter: 3/8" - 2.4" (10 mm - 60 mm) Profile Section: 3/8" x 3/8" to 2" x 2" (10 mm x 10 mm to 50 mm x 50 m
        1-1/2" (38mm) x .134" (3.4mm) ARDCOR #U-10 TIG Mill
        $45,000
        1-1/2" (38mm) x .134" (3.4mm) ARDCOR #U-10 TIG Mill
        PRELIMINARY SPECIFICATIONS: Maximum Tube Diameter: 1-1/2" Minimum Tube Diameter: 3/4" Maximum Wall Thickness: .134" Minimum Wall Thickness: .034" Vertical Adjustment: 4" - 8-5/8" Horizontal Centers: 16" Roll Spa
        • Maximum diameter: 1.5"
        • Maximum thickness: 0.034"
          Oster 4” Pipe Threader
          $6,500
          Oster 4” Pipe Threader
          General Specifications: 400 Volt W/ several Die Heads Condition:
          2" O.D. CRITERION #50000 COMPRESSION TUBE BENDER, SINGLE HEAD
          $RFQ
          2" O.D. CRITERION #50000 COMPRESSION TUBE BENDER, SINGLE HEAD
          2" O.D. CRITERION #50000 COMPRESSION TUBE BENDER, SINGLE HEAD MANUFACTURED 1998 RACO Stock Number R014679 MAX. CAPACITY, ONE TUBE PER CYCLE ------ 2" O.D. X .095" ( WITH APPROPRIATE BEND HEAD )
          • Maximum diameter: 2"
            1-1/4" HILMOR MODEL DB.32 HYDRAULIC ROTARY TUBE BENDER
            $RFQ
            1-1/4" HILMOR MODEL DB.32 HYDRAULIC ROTARY TUBE BENDER
            1-1/4" HILMOR MODEL DB.32 HYDRAULIC ROTARY TUBE BENDER MANUFACTURED 1988 RACO Stock Number R015252 MAXIMUM CAPACITY O.D.: NON-FERROUS TUBE -------------------------- 1-5/8" ( 42 mm ) MILD STEEL T
            • Maximum diameter: 1.25"
              PINES MODEL 3/4 HYDRAULIC ROTARY TUBE BENDER
              $RFQ
              PINES MODEL 3/4 HYDRAULIC ROTARY TUBE BENDER
              PINES MODEL 3/4 HYDRAULIC ROTARY TUBE BENDER MANUFACTURED 1976 RACO Stock Number R015637 BENDING DIRECTION ------------------------- COUNTER-CLOCKWISE MAXIMUM RADIUS --------------------------- 10" MAXIMUM
              PINES MODEL 1400 ROTARY TUBE BENDER
              $RFQ
              PINES MODEL 1400 ROTARY TUBE BENDER
              PINES MODEL 1400 ROTARY TUBE BENDER MANUFACTURED APPROX. 1973 RACO Stock Number R015307 MAXIMUM BENDING CAPACITY: I.P.S. EXTRA HEAVY PIPE ---------------------- 1/2" NON-FERROUS TUBING Y.P. TO 12,000 PS
              SMS 5TB SMITH PRESS TYPE VERTICAL HYDRAULIC TUBE BENDER
              $RFQ
              SMS 5TB SMITH PRESS TYPE VERTICAL HYDRAULIC TUBE BENDER
              SMS 5TB SMITH PRESS TYPE VERTICAL HYDRAULIC TUBE BENDER RACO Stock Number R015091 MOTOR ------------------------------------- 20 HP 230/460/3/60 DIMENSIONS (IN.): 90 X 30 X 55
              1-5/8" WALLACE HYDRAULIC TUBE BENDING MACHINE: STOCK 54236
              $RFQ
              1-5/8" WALLACE HYDRAULIC TUBE BENDING MACHINE: STOCK 54236
              SERIAL ........................... 9017-1 MODEL ............................ 50 - 1/58 CAPACITY ......................... 1-5/8" I.P.S. EXTRA HEAY PIPE ........... 1-5/8" NON FERROUS TUBING .............
              3" AMERICAN MACHINE MODEL #ET2000 TUBE BENDER: STOCK #51188
              $RFQ
              3" AMERICAN MACHINE MODEL #ET2000 TUBE BENDER: STOCK #51188
              SERIAL NUMBER ............................ 7116 AGE ...................................... 1985 MODEL .................................... ET2000 BEND CAPACITY ............................ 1/2" TO 3" DIAMETER TU
              WALLACE BENDER: STOCK #50811
              $RFQ
              WALLACE BENDER: STOCK #50811
              ESTIMATED CAPACITY ... 2" HEAVY WALL TUBE ... 1" BAR (COLD) ........
              1" PINES #1 ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER: STOCK #19259
              $RFQ
              1" PINES #1 ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER: STOCK #19259
              SERIAL ............................... 11046-61286 MODEL ................................ 1 NON-FERROUS TUBE Y.P. TO 25,000 PSI .. 1-3/4" O.D. X .120" WALL STEEL TUBE Y.P. TO 40,000 PSI ........ 1-3/4" O.D. X .0
              2-3/4" EAGLE TUBE ANGLE END CUTTING MACHINE: STOCK #18763
              $RFQ
              2-3/4" EAGLE TUBE ANGLE END CUTTING MACHINE: STOCK #18763
              MODEL ............................ 85-349 TC MITRE CUT MACHINE IS A COMPACT, SELF CONTAINED UNIT DESIGNED FOR CUTTING A DOUBLE ANGLE ON THE END OF A STEEL TUBE CAPACITY ......................... 2-3/4" WALL S
              2" ROTARY TUBE CUTOFF: STOCK #16384
              $RFQ
              2" ROTARY TUBE CUTOFF: STOCK #16384
              MAXIMUM TUBE DIAMETER ............... 2"ADJUSTABLE STOCK STOP LENGTH ........ 24"CUTOFF WHEEL DIAMETER ............... 6"ELECTRIC FOOT TRIP .................. YESROLLER TUBE SUPPORT BLOCKS .......... YESPNEUMATIC CUTOFF
              Modern 3K Tube Cutoff w/ 20' Loader
              $RFQ
              Modern 3K Tube Cutoff w/ 20' Loader
              Modern Model# 3K * Video: http://www.youtube.com/watch?v=H1oXIWx1VuA * Serial# 3K3161 * 20' Bundle Loader (Model 2LD) * Serial# 2LD2339 * Includes Watkins Saw Head * Can OD chamfer both ends and ID chamfer 1 en
              • Maximum workpiece diameter: 3.125"
                2" LANDIS STATIONARY DIE HEAD PIPE THREADING MACHINE
                $RFQ
                2" LANDIS STATIONARY DIE HEAD PIPE THREADING MACHINE
                SPINDLE SPEED ( 9 STEPS).....30-163 RPM FAST ACTING FRONT CHUCK MOTOR........................3 HP 220/40V Equipped with: LANDIS 2" STATIONARY DIE HEAD (1/2" - 2") FAST CUT-OFF FAST ACTING FRONT CHU
                Related Subcategories:
                Categories:
                Condition:
                • X Used (249)
                Manufacturer:
                Location:
                Price:
                •  to 
                1 | 2 | 3