buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Tube & Pipe Machinery > Tube Mills > Used

Used Tube Mills For Sale

44 used tube mill items for sale
1 | 2 | 3
Refine: Viewing 1 - 20 of 44 matches
Sort by:
Items Per Page:  20  |  50 |  100
RAFTER TUBE MILL (14539)
$RFQ
RAFTER TUBE MILL (14539)
RAFTER TUBE MILLStock # 14539MANUFACTURER:       RAFTERNUMBER OF STANDS:   4SIZING STANDS:      3DRAWING DIE BOXDRAWING PULL OUT CAPSTAN**T
55mm MORI MIU 30 COPPER TUBE MILL (14473)
$RFQ
55mm MORI MIU 30 COPPER TUBE MILL (14473)
Tube Dia 55 millimeters Max. Wall Thickness
55mm MORI MIU 30 COPPER TUBE MILL No 2 (14472)
$RFQ
55mm MORI MIU 30 COPPER TUBE MILL No 2 (14472)
Tube Dia 55 millimeters Max. Wall Thickness
2-1/2″ (63.5 mm) x .095″ (2.41 mm) Yoder M2 High Frequency Tube Mill Line
$RFQ
2-1/2″ (63.5 mm) x .095″ (2.41 mm) Yoder M2 High Frequency Tube Mill Line
UTUBE NUMBER: 4101 MANUFACTURER: YODER MODEL NUMBER: M2 SPECIFICATIONS: Line Direction: Left to right Maximum Tube Diameter: 2-1/2″ (63.5 mm) Minimum Tube Diameter: 1/2″ (12.7 mm) Maximum Wall Thickness: .095″ (
  • Maximum diameter: 2.5"
  • Maximum thickness: 0.095"
    ADDISON ET-050 TUBE MILL (14335)
    $RFQ
    ADDISON ET-050 TUBE MILL (14335)
    Tube Dia 1 inches Max. Wall Thickness .08
    2" (48.4mm) - 3/4" (19mm) STEEL TUBE MILL WITH TURKSHEAD (13777)
    $RFQ
    2" (48.4mm) - 3/4" (19mm) STEEL TUBE MILL WITH TURKSHEAD (13777)
    Tube Dia 2 inches Max. Wall Thickness 0.0
    3 3/4" (95mm) - 1 " (25mm) STEEL TUBE MILL, NEW 2004 (13776)
    $RFQ
    3 3/4" (95mm) - 1 " (25mm) STEEL TUBE MILL, NEW 2004 (13776)
    Tube Dia 1 inches Max. Wall Thickness 0.1
    3" (76mm) x .135" (3.5mm), URRUTIA, 2-1/2, TUBE MILL (NO WELDER/SHEAR) (11829)
    $RFQ
    3" (76mm) x .135" (3.5mm), URRUTIA, 2-1/2, TUBE MILL (NO WELDER/SHEAR) (11829)
    MACHINE# 11829 SPECIFICATIONS: manufacturer: URRUTIA Model Number: 2-1/2 Year of Manufacture: 1970 NOTE: TUBE MILL ONLY, NO WELDER OR CUT-OFF. Direction of Line:
    5" (127 mm) TUREK & HELLER W-35 TIG Tube Mill
    $RFQ
    5" (127 mm) TUREK & HELLER W-35 TIG Tube Mill
    Stock #3826 Model #W-35 Direction: R-L OD Range: 3 - 5" (76 - 127 mm) Max Line Speed: 30 FPM Gear In no Load Max D/T Ratio: 50:1 Min D/T Ratio: 10:1 Gearbox Data: Roll Space Forming: 15" Vertical Cen
    • Maximum diameter: 5"
      5" (127 mm) TUREK & HELLER W-35 TIG Tube Mill
      $RFQ
      5" (127 mm) TUREK & HELLER W-35 TIG Tube Mill
      Stock #3825 Model #W-35 Direction: R-L OD Range: 2 - 5" (50.8 - 127 mm) Max Line Speed: 30 FPM Gear In no Load Max D/T Ratio: 50:1 Min D/T Ratio: 10:1 Gearbox Data: Roll Space Forming: 18" Minimum Ve
      • Maximum diameter: 5"
        152mm x 6mm Redman ARM HF Tube Mill
        $RFQ
        152mm x 6mm Redman ARM HF Tube Mill
        Make: Redman ARM (United Kingdom) Tube Diameter: 50mm - 152mm Wall Thickness: 1.5mm - 6mm Shaft Diameter: 110mm Pipe Length: 3500mm - 13000mm Direction: Right to Left Coil Storage Station Floor Standing C
        • Maximum diameter: 5"
        • Maximum thickness: 0.25"
          1.5″ (38.1mm) x .05″ (1.27 mm) MCKAY Tube Mill, $55,000!
          $55,000
          1.5″ (38.1mm) x .05″ (1.27 mm) MCKAY Tube Mill, $55,000!
          Stock #1728 Model #S.O. #4414 OD Range: .50" (12.7mm) - 1.5" (38.1mm) Wall Thickness Range: .020" (.508mm) - .05" (1.27mm) D/T Ratio: 10:1 - 60:1 Max Material Yield: 50,000 PSI Max Mill Speed: 150 FPM (46 MPM) Max
          • Maximum diameter: 1.5"
          • Maximum thickness: 0.05"
            24" x 1/2" Torrance API Tube Mill
            $RFQ
            24" x 1/2" Torrance API Tube Mill
            Make: Torrance (USA) Model: TMC - 450 Pipe Diameter: 6-5/8" - 24" Wall Thickness: .030" - .500" Material Grade: API X42, X52, X60, X70 Maximum Pipe Length: 12.8 meters Entry Coil Car Cone T
            • Maximum diameter: 24"
            • Maximum thickness: 0.5"
              1-1/4" (31.7mm) x .049" (1.24mm) YODER M1-1/2 Tube Mill Line
              $RFQ
              1-1/4" (31.7mm) x .049" (1.24mm) YODER M1-1/2 Tube Mill Line
              Serial #6705 Direction: R-L Tube OD Range: .313" - 1-1/4" (7.95 - 31.7mm) Wall Thickness Range: .020" - .049" (.508 - 1.24mm) Max Line Speed: 150 FPM, Max. Gear In Speed, No Load D/T Ratio: 10:1 - 60:1 Max Material
              • Maximum diameter: 1.25"
              • Maximum thickness: 0.049"
                5" x 4mm Kusakabe ERW Tube Mill
                $RFQ
                5" x 4mm Kusakabe ERW Tube Mill
                Make: Kusakabe (Japan) Pipe Diameter: 1" - 5" Wall Thickness: 1.2mm - 4mm Material: CR, HR, HGI Maximum Speed: 40 meters per minute Direction: Left to Right Mandrel Uncoiler Coil Weight: 7,000kg
                • Maximum diameter: 5"
                • Maximum thickness: 0.187"
                  8" x .220" GMI HF Tube Mill
                  $RFQ
                  8" x .220" GMI HF Tube Mill
                  Year Installed: 2000 Tube Diameter: 1.5" - 8" Wall Thickness: .050" - .220" Shaft Diameter: 125mm Speed: 20 - 40 meters per minute Average Daily Production: 50 ton Coil Width: 148mm - 990mm
                  • Maximum diameter: 8"
                  • Maximum thickness: 0.22"
                    8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
                    $RFQ
                    8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
                    8" (203mm) YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL THIS IS A 8" (203MM) API TUBE MILL ALONG WITH ROLLER CONVEYOR & PIPE TRANSFER TABLES TO STRAIGHTEN, END BEVEL, HYDROSTATIC TEST, NDT/ULTRASONIC
                    127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
                    $RFQ
                    127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
                    Manufacturer: Neirotti Italy / Thermatool USA / OTO Mills/ MAIR Research Tube Diameter Range: 42mm to 127mm Wall Thickness Range: 1.2mm to 4mm Line Direction: Right to Left Speed: 100mpm Complete Mill with the Fo
                    63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
                    $RFQ
                    63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
                    Manufacturer: MTM Italy Year: 1992 Diameter Range: 12.7mm to 63.5mm Wall thickness Range: 1.5mm to 4mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End U
                    60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
                    $RFQ
                    60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
                    Manufacturer: Oto Mills Installation: 1991 Update: 2007 Tube Diameter Range: 16mm to 60.3mm Thickness Range: 0.8mm to 3mm Tube Length: 4 to 8meter Mill Speed: 130 meter/minute Direction: Left to Rigth Complete
                    Categories:
                    • X machine tools (44)
                    • X Tube & Pipe Machinery (44)
                    • X Tube Mills (44)
                    Condition:
                    • X Used (44)
                    Manufacturer:
                    Location:
                    Price:
                    •  to 
                    1 | 2 | 3