buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Gear & Gear Cutting Machinery > Used

Used Gear Cutting Machines For Sale

189 used gear cutting machine items for sale
1 | 2
Refine: Viewing 101 - 189 of 189 matches
Sort by:
Items Per Page:  20 |  50 |  100
MODEL 17A GLEASON GEAR TESTER
$RFQ
MODEL 17A GLEASON GEAR TESTER
EQUIPPED WITH: SPECIFICATIONS: Diameter of Gear: 20" Max. Offset Of Gear Spdl. Above Or Below Center Of Pinion Spdl.: 3-1/2" Max. Dis. From Center Of Gear Spdl. To Nose Of Pinion Spdl.: 12" Max,
MODEL 17A GLEASON HYPOID GEAR TESTER
$RFQ
MODEL 17A GLEASON HYPOID GEAR TESTER
EQUIPPED WITH: Manual/Auto Cycle Rapid Pinion Advance Backlash Eliminator Jeweled Dial Indicator Jogger Valve (Slide) Load Meter Hydraulic Chucking Work Light Bijur Lube SPECIFICATIONS: Diameter Of Gear:
NO. 17A GLEASON GEAR TESTER
$RFQ
NO. 17A GLEASON GEAR TESTER
Designed to Test The Running Qualities Of Straight Bevel, Zerol Bevel, Spiral Bevel, And Hypoid Gears Whose Shafts Intersect At 90 Degrees. EQUIPPED WITH: Manual/Auto Cycle Back Lash Eliminator Hydraulic Chuckin
NO.12M FELLOWS INVOLUTE TESTER
$RFQ
NO.12M FELLOWS INVOLUTE TESTER
EQUIPPED WITH: Rectilinear Recorder Sliding Tailstock Standards Thermal Pen Centers *Masters Available SPECIFICATIONS: Max. Pitch Diameter: 12" Max. Travel of Work Spindle: 4" Max. Travel of T
NO. 12M, FELLOWS,W/#1605 ITW RECORDER, INK PEN/MOTOR
$RFQ
NO. 12M, FELLOWS,W/#1605 ITW RECORDER, INK PEN/MOTOR
EQUIPPED WITH: Headstock With Center, Tailstock With Center Recorder, Master Gear Arbor With Nut Operators Manual Parts Manual CATALOG SPECIFICATIONS: Maximum Pitch Diameter: 12" Weight (Crated
NO. 12M FELLOWS, 12" DIA., RECORDER, HI-RESPONSE, '48-'60
$RFQ
NO. 12M FELLOWS, 12" DIA., RECORDER, HI-RESPONSE, '48-'60
EQUIPPED WITH: -REMANUFACTURED AND GUARANTEED- Solid State micro linear displacement recorder with: incremental magnification up to 10,000 to 1; thermal pen and roll of chart paper (3.2"x125'); one electrical
MODEL 1205-18 MICHIGAN SINE LINE GEAR CHECKER
$RFQ
MODEL 1205-18 MICHIGAN SINE LINE GEAR CHECKER
CATALOG SPECIFICATIONS: Maximum Diameter ......................... 18 in. Minimum Diameter ......................... 0 in. *Max. Face Width ......................... 7 in. Distance Between Centers (Max.) ..........
NO. #8, FELLOWS MICRODEX, SOLID STATE RECORDER, 1962 EXC CONDITION
$RFQ
NO. #8, FELLOWS MICRODEX, SOLID STATE RECORDER, 1962 EXC CONDITION
EQUIPPED WITH: Pointer Recorder Meter Thermal Paper CATALOG SPECIFICATION: Maximum Pitch Diameter........................... 13-5/8" Diametral Pitch ................................. 120 and Coarser Ma
NO. 7125A, 1943 FELLOWS INTERNAL & EXTERNAL GEAR SHAPER, 1 1/2" RISER
$RFQ
NO. 7125A, 1943 FELLOWS INTERNAL & EXTERNAL GEAR SHAPER, 1 1/2" RISER
EQUIPPED WITH: 1-1/2" Riser CATALOG SPECIFICATIONS: Maximum Pitch Diameter, External: 7" Maximum Pitch Diameter, Internal: 6" Maximum Face Width, External
MODEL 615A FELLOWS GEAR SHAPER, 1941
$RFQ
MODEL 615A FELLOWS GEAR SHAPER, 1941
EQUIPPED WITH: Coolant Change Gears Two Set up For Your Jobs Spur Guide Solid Spindle Operators and Parts Manuals CATALOG SPECIFICATIONS: Maximum External & Internal Pitch Diameter: 18" Maximum Face
NO. 615, FELLOWS, SPUR GUIDE, CHANGE GEARS, MOTOR & CONTROLS
$RFQ
NO. 615, FELLOWS, SPUR GUIDE, CHANGE GEARS, MOTOR & CONTROLS
EQUIPPED WITH: Spur Guide Change Gears Motor & Controls CATALOG SPECIFICATIONS: Maximum Ext. Pitch Diameter Spur 35" Maximum Ext. Pitch Diameter Helical 35" Maximum Int. Pitch Diameter Spur 25"
MODEL 4GS FELLOWS SHAPER, NEW 1966
$RFQ
MODEL 4GS FELLOWS SHAPER, NEW 1966
EQUIPPED WITH: Straight Spur Guide-Some Helical Guides Available One Set Speed & Index Gears-As You Desire From Our Stock Single Or Double Cut Cams-As You Desire From Our Stock Coolant System Automatic Lube 220/4
MODEL 4AGS FELLOWS SHAPER, NEW 1966
$RFQ
MODEL 4AGS FELLOWS SHAPER, NEW 1966
EQUIPPED WITH: Straight Spur Guide-Some Helical Guides Available One set Speed & Index Gears-As You Desire From Our Stock Single Or Double Cut Cams-As You Desire From Our Stock Coolant System Automatic Lube 220/4
NO. 4A, FELLOWS, 1964,
$RFQ
NO. 4A, FELLOWS, 1964,
EQUIPPED WITH: Spur Guide 8" Riser 220/440 V Motor & Control Coolant SPECIFICATIONS: Dimensions 56"L x 44"W x 90"H Weight 6500# F.O.B., TRUCK, LOCATION
MODEL 3073 MICROMATIC, 1997 SHEARSPEED GEAR SHAPER
$RFQ
MODEL 3073 MICROMATIC, 1997 SHEARSPEED GEAR SHAPER
EQUIPPED WITH: Allen Bradley Panelview Control Tool Feed Cam Workholding Fixture Ratchet Wheel Cutter Body Hydraulic Unit Coolant Pump Motor SPECIFICATIONS: Capacity-External: Maximum Part Diameter: 7�
NO. 30-136, SHEAR SPEED, 6.5" STROKE, MAXIMUM FACE 6"
$RFQ
NO. 30-136, SHEAR SPEED, 6.5" STROKE, MAXIMUM FACE 6"
EQUIPPED WITH: Motor & Control, Coolant System, Coolant Ring, Chip Conveyor Bottom Plate, Hydraulic System, Hydraulic Tooling Jack CATALOG SPECIFICATIONS: Capacity - External: Maximum/Minimum Part Diameter 13&
NO. 3, FELLOWS,
$RFQ
NO. 3, FELLOWS,
EQUIPPED WITH: Hollow Spindle Coolant System Change Gears for 2 of your jobs CATALOG SPECIFICATIONS: Max. Pitch Diameter: Ext.3" Int.2" Max. Face Width: 3/4 inch Approximate Dim
MODEL # 10-4 BARBER COLMAN VERTICAL GEAR SHAPER
$RFQ
MODEL # 10-4 BARBER COLMAN VERTICAL GEAR SHAPER
EQUIPPED WITH: Multi-Cut Cycles Power Tailstock Spur Guide Change Gears For Two of Your Jobs Coolant System Hydraulic System SPECIFICATIONS: Max. Pitch Diameter, External & Internal: 10" Max. Face Wi
MODEEL 10-2 FELLOWS GEAR SHAPER
$RFQ
MODEEL 10-2 FELLOWS GEAR SHAPER
EQUIPPED WITH: Spur Guide 3-Cut Cycle Hydraulic Work Clamping 14" T-Slotted Table W/5-7/8" Bore Light Curtains Automatic Lube (1) Set-Up of Change Gears Allen Bradley PLC-2 7-1/2 HP 2 Speed Motor
MODEL #615A FELLOWS GEAR SHAPER
$RFQ
MODEL #615A FELLOWS GEAR SHAPER
EQUIPPED WITH: Hollow Cutter Spindle Spur Guide 18" Pitch Diameter 5" Stroke CATALOG SPECIFICATIONS: Maximum External & Internal Pitch Diameter18" Maximum Face Width: External 5"
REISHAUER PRECISION LAPPER,
$RFQ
REISHAUER PRECISION LAPPER,
BENCH TYPE, EXCELLENT CONDITION COMPLETE WITH MOTOR AND CONTROLS
MODEL NO. 516 GLEASON GEAR LAPPER
$RFQ
MODEL NO. 516 GLEASON GEAR LAPPER
EQUIPPED WITH: Hydraulic Chucking Gear Cone Motion Manual/Auto Cycle Forward/Reverse Cycles Lapping Compound Tank Fixing Motor Hydrualic Unit Lube System Guards SPECIFICATIONS: Capacity: Diameter of Ge
NO. 516, GLEASON,
$RFQ
NO. 516, GLEASON,
EQUIPPED WITH: Hydraulic Chucking Gear Cone Motion Manual/Auto Cycle Forward/Reverse Cycles Lube System Hydraulic Unit Lapping Compound Tank Mixing Motor Guards SPECIFICATIONS: Capacity: Diameter of Gear
MODEL 514 GLEASON GEAR LAPPER WITH SWING PINION CONE (SPC) LAPPING ACTION, 1989
$RFQ
MODEL 514 GLEASON GEAR LAPPER WITH SWING PINION CONE (SPC) LAPPING ACTION, 1989
The Gleason No. 514 Hypoid Lapper affords fast lapping times, improved quality, accurate contol, and increased flexibility. The swing pinion cone (SPC) lapping action, combined with the conventional pinion horizontal a
MODEL 514 GLEASON GEAR LAPPER WITH SWING PINION CONE (SPC) LAPPING ACTION, 1967
$RFQ
MODEL 514 GLEASON GEAR LAPPER WITH SWING PINION CONE (SPC) LAPPING ACTION, 1967
The Gleason No. 514 Hypoid Lapper affords fast lapping times, improved quality, accurate contol, and increased flexibility. The swing pinion cone (SPC) lapping action, combined with the conventional pinion horizontal a
MODEL 514 GLEASON GEAR LAPPER WITH SWING PINION CONE (SPC) LAPPING ACTION, 1991
$RFQ
MODEL 514 GLEASON GEAR LAPPER WITH SWING PINION CONE (SPC) LAPPING ACTION, 1991
The Gleason No. 514 Hypoid Lapper affords fast lapping times, improved quality, accurate contol, and increased flexibility. The swing pinion cone (SPC) lapping action, combined with the conventional pinion horizontal a
MODEL 514 GLEASON GEAR LAPPER
$RFQ
MODEL 514 GLEASON GEAR LAPPER
The Gleason No. 514 Hypoid Lapper affords fast lapping times, improved quality, accurate contol, and increased flexibility. The swing pinion cone (SPC) lapping action, combined with the conventional pinion horizontal a
MODEL 514 GLEASON GEAR LAPPER
$RFQ
MODEL 514 GLEASON GEAR LAPPER
The Gleason No. 514 Hypoid Lapper affords fast lapping times, improved quality, accurate contol, and increased flexibility. The swing pinion cone (SPC) lapping action, combined with the conventional pinion horizontal a
No. 507, GLEASON,
$RFQ
No. 507, GLEASON,
EQUIPPED WITH: Adjustable Hydraulic Brake Variable Speed Drive Motor Automatic Lapping Guard Automatic Meshing Automatic Preset Backlash Manual Lapping Compound Replenish System Remanufactured by Gleason in 1989
NO. 503, GLEASON, 1966,
$RFQ
NO. 503, GLEASON, 1966,
SPECIFICATIONS: Maximum Gear Diameter: 10.50" Maximum Pinion Diameter: 6.00" Pinion Spindle Diameter Of Taper Hole At Large End: 3.91" Pinion Spindle Depth Of Taper: 3.00" Gear Spindle Dia
MODEL 503 GLEASON HYPOID GEAR LAPPER
$RFQ
MODEL 503 GLEASON HYPOID GEAR LAPPER
EQUIPPED WITH: Lap System Guide Hydraulic System Hydraulic Chucking Automatic Backlash Eliminator Power Traverse Automatic Splash Doors SPECIFICATIONS: Maximum Gear Diameter: 10.50" Maximum Pinion
GLEASON MODEL 503 HYPOID GEAR LAPPER
$RFQ
GLEASON MODEL 503 HYPOID GEAR LAPPER
EQUIPPED WITH: Lap System Guide Hydraulic System Hydraulic Chucking Power Traverse Automatic Backlash Eliminator Automatic Splash Doors SPECIFICATIONS: Maximum Gear Diameter: 10.50" Maximum Pinion D
NO.T-465, TOYO,USED NEDW TECHNOLOGY- LARGE RING CUTTER-CAN DO MORE CORRECTION
$RFQ
NO.T-465, TOYO,USED NEDW TECHNOLOGY- LARGE RING CUTTER-CAN DO MORE CORRECTION
EQUIPPED WITH: Fanuc 5 Axis CNC Control 16M Power Stocks Power Door X Axis Pulse Generator Coolant Sy
NO.T-465, TOYO,USES NEWEST TECHNOLOGY- LARGE RING CUTTER- MORE CORRECTION DONE
$RFQ
NO.T-465, TOYO,USES NEWEST TECHNOLOGY- LARGE RING CUTTER- MORE CORRECTION DONE
EQUPPED WITH: Fanuc 5 Axis CNC Control 160M 5 Part Program Power Stocks Work Light Power Door Auto Dress X Axis Pulse Generator Manual for 160M Control Coolant System with Twin Filters & Magnetic Chip Separato
NO.T-465, TOYO,BIG RING CUTTER- WORK RUNS INSIDE-WILL DO MORE CORRECTING
$RFQ
NO.T-465, TOYO,BIG RING CUTTER- WORK RUNS INSIDE-WILL DO MORE CORRECTING
EQUIPPED WITH: Fanuc 5-Axis CNC Control 160M Auto Dress Power Stocks X-Axis Pulse Generator 5-Part Program Coolant System w/Twin Filters & Magnetic Chip Separator Power Door Honing Tool Set-Up For Last Job On M
NO.T-465, TOYO, 13" PD- LARGE RING CUTTER WORK IS INSIDE NEWEST DESIGN
$RFQ
NO.T-465, TOYO, 13" PD- LARGE RING CUTTER WORK IS INSIDE NEWEST DESIGN
EQUIPPED WITH: Fanuc 160M Control Power Stocks 5-Part Program Auto Dress X-Axis Pulse Generator Coolant System W/Twin Filters & Magnetic Chip Separator Power Door Worklight Manuals SPECIFICATIONS: Machin
NO.T-465, TOYO,MAX PD 13"- LARGE RING CUTTER- GEAR IS INSIDE OF CUTTER
$RFQ
NO.T-465, TOYO,MAX PD 13"- LARGE RING CUTTER- GEAR IS INSIDE OF CUTTER
EQUIPPED WITH: Power Stock Fanuc 5-Axis CNC Control 160M Auto Dress X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set Up for Last Job is Still in the Machine Internal
NO.T-465, TOYO, 13" MAX PD INSTALLED IN 2001 NEW TECHNOLOGY
$RFQ
NO.T-465, TOYO, 13" MAX PD INSTALLED IN 2001 NEW TECHNOLOGY
EQUIPPED WITH: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Inter
NO.T-465, TOYO,
$RFQ
NO.T-465, TOYO,
EQUIPPED WITH: Power Stock Fanuc 5-Axis CNC Control 160M Auto Dress X-Axis Pulse Generator Coolant System w/Twin Filter & Magnetic Chip Separator Honing Tool Set-Up for Last Job is Still in the Machine Internal
NO.T-465 TOYO CNC GEAR HONE
$RFQ
NO.T-465 TOYO CNC GEAR HONE
EQUIPPED WITH: Fanuc 5-Axis CNC Control 160M Auto Dress Power Stocks X-Axis Pulse Generator 5-Part Program Coolant System W/Twin Filters & Magnetic Chip Separator Power Door Honing Tool Set-Up For Last Job On M
12" RED RING MODEL GHD GEAR HONE, NEW 1965
$RFQ
12" RED RING MODEL GHD GEAR HONE, NEW 1965
EQUIPPED WITH: Crowning Attachment Automatic Power Door Power Tailstock Headstock Coolant System Dresser 220/440/3/60 AC Motor
12" RED RING, HYD. TLSTK, CROWNING, AUTO LOAD, WHEEL DRESSER, 14"SWING, D,P.2-20
$RFQ
12" RED RING, HYD. TLSTK, CROWNING, AUTO LOAD, WHEEL DRESSER, 14"SWING, D,P.2-20
EQUIPPED WITH: Headstock Hydraulic Tailstock Lube System Push Button Controls Electrical Panel Automatic Loader Crowning Attachment Pneumatic Door Closer Wheel Dresser Coolant Pump CATALOG SPECIFICATIO
CLEVELAND RIGID HOBBER
$RFQ
CLEVELAND RIGID HOBBER
EQUIPPED WITH: Single Spindle V-Belt Drive Auto Load Tailstock In Base Continuous Automatic Shifting Hi-Speed Hob Head (1) Set Of Feed And Index Gears CATALOG SPECIFICATIONS: Maximum Diametral Pitch Of Hob
MODEL NO. 3 BARBER COLMAN GEAR HOBBER TRIPLE THREAD INDEX
$RFQ
MODEL NO. 3 BARBER COLMAN GEAR HOBBER TRIPLE THREAD INDEX
EQUIPPED WITH: Hob Arbor Tailstock Change Gears for Two Of Your Jobs Coolant System Triple Thread Worm CATALOG SPECIFICATIONS: Single Cut Capacity In Steel: Gears: 16 Pitch: 2" Max. Diameter Gears: 2
MODEL NO. 3, BARBER COLMAN, HORIZONTAL GEAR HOBBER
$RFQ
MODEL NO. 3, BARBER COLMAN, HORIZONTAL GEAR HOBBER
CATALOG SPECIFICATIONS: Single Cut Capacity In Steel: Gears: 16 Pitch 2" Max. Diameter 24 Pitch 3" Max. Diameter 34 Pitch 4" Max. Diameter Maximum Work Diameter 5" Maximum Work Face 7"
NO. 14-15, BARBER COLMAN,DOWNFEED
$RFQ
NO. 14-15, BARBER COLMAN,DOWNFEED
CATALOG SPECIFICATIONS: Maximum DP And Diameter In Steel, 1 Cut3.5 DP, 4" Diameter Maximum Rated Work Diameter14" Maximum Travel Of Hob Slide15" Maximum Distance Work Spindle Face To Center- line Of
NO. 14-15, BARBER COLMAN,DOWNFEED
$RFQ
NO. 14-15, BARBER COLMAN,DOWNFEED
CATALOG SPECIFICATIONS: Maximum DP And Diameter In Steel, 1 Cut3.5 DP, 4" Dia. Maximum Rated Work Diameter 14" Maximum Travel Of Hob Slide15" Maximum Distance Work Spindle Face To Centerline Of Hob
TYPE "A" BARBER COLMAN GEAR HOBBER
$RFQ
TYPE "A" BARBER COLMAN GEAR HOBBER
EQUIPPED WITH: 3" Hole In Work Spindle 3-Jaw Chuck On Work Slide Tailstock With Center 5 HP Motor Coolant System Single Thread Index Complete W/1 1/4" Hob Ar
MAAG SH-150 60" GEAR GRINDER
$RFQ
MAAG SH-150 60" GEAR GRINDER
EQUIPPED WITH: Wheel Dresser with Automatic Compensation W/Diamonds Automatic Lube System Dust Collector Change Gears Wheel Mount Extra Wheels Operators Manual Foundation Drawings Electrical Print
MODEL FKP 326-10 CSEPEL GEAR GRINDER 13"REISHAUER TYPE
$RFQ
MODEL FKP 326-10 CSEPEL GEAR GRINDER 13"REISHAUER TYPE
EQUIPPED WITH: Crowning Fassler Dresser Wheel Mounts Coolant System Change Gears Operator's Manual Electrical Diagrams Parts Manual SPECIFICATIONS: Processing Diameter: 320mm Tooth Width: 150mm Modulu
MODEL 12 REISHAUER GEAR GRINDER
$RFQ
MODEL 12 REISHAUER GEAR GRINDER
EQUIPPED WITH: Crowning Dresser Wheel Mounts Change Gears Coolant Tank and Pump Hydraulic Unit Power Lube Instruction and Parts Manuals SPECIFICATIONS: Max. Outside Diameter (Spur & Helical gears): 12�
MODEL 610 GLEASON GEAR ROUGHER/FINISHER
$RFQ
MODEL 610 GLEASON GEAR ROUGHER/FINISHER
EQUIPPED WITH: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Change Gears Hydraulic System Coolant System CATALOG SPECIFICATIONS: Maximum Gear Pitch Diameter: 20" Cutter Diameters:
MODEL 609 GLEASON GEAR FINISHER
$RFQ
MODEL 609 GLEASON GEAR FINISHER
EQUIPPED WITH: Stock Divider Hydraulic Work Clamping Chip Conveyor Index Plate Change Gears Hydraulic System Coolant System Work Light SPECIFICATIONS: Min. Outside Cone Distance: 2.75" Max. Cone Di
MODEL 450HC GLEASON/PHOENIX CNC DRY CUTTING SPIRAL BEVEL GEAR GENERATOR
$RFQ
MODEL 450HC GLEASON/PHOENIX CNC DRY CUTTING SPIRAL BEVEL GEAR GENERATOR
EQUIPPED WITH: Dry Cutting Fanuc 150 MB Chip Evacuation System Hydraulic Work Clamping Chip Auger Hydraulic System Jib Hoist Manuals SPECIFICATIONS: Largest Speed Ratio: 10:01 Work Area (Continuous): L
GLEASON MODEL 116 CNC HYPOID GEAR GENERATOR
$RFQ
GLEASON MODEL 116 CNC HYPOID GEAR GENERATOR
EQUIPPED WITH: Fanuc 18T Enclosed Guarding Hydraulic Clamping 6 Axis DRO Coolant System Stock Divide Magnetic Chip Separator SPECIFICATIONS: WORKPIECE CAPACITY: Automotive Version (Jobbing Version) Y
MODEL No. 116, GLEASON GEAR GENERATOR FINISHER
$RFQ
MODEL No. 116, GLEASON GEAR GENERATOR FINISHER
EQUIPPED WITH: Stock Divider Modified Roll Hydraulic Clamping Change Gears Coolant System CATALOG SPECIFICATIONS: Maximum Pitch Diameter: 18" Maximum Rate: 10/1 Maximum Cone Distance: 9"
MODEL No. 116, GLEASON GEAR GENERATOR ROUGHER
$RFQ
MODEL No. 116, GLEASON GEAR GENERATOR ROUGHER
EQUIPPED WITH: Coolant System Modified Roll Hydraulic Chucking Change Gears Chip Conveyor CATALOG SPECIFICATIONS: Maximum Pitch Diameter: 18" Maximum Rate: 10/1 Maximum Cone Distance: 9"
MODEL NO. 116 GLEASON GEAR GENERATOR ROUGHER
$RFQ
MODEL NO. 116 GLEASON GEAR GENERATOR ROUGHER
EQUIPPED WITH: 415/3/50 Hydraulic Clamping Hydraulic Chucking Change Gears Modified Roll Cutter Body Coolant System CATALOG SPECIFICATIONS: Maximum Pitch Diameter: 18" Maximum Rate: 10/1 Maxim
MODEL 116 GLEASON GEAR GENERATOR ROUGHER
$RFQ
MODEL 116 GLEASON GEAR GENERATOR ROUGHER
EQUIPPED WITH: Modified Roll Hydraulic Chucking Chip Conveyor Coolant System Change Gears CATALOG SPECIFICATIONS: Maximum Pitch Diameter: 18" Maximum Rate: 10/1 Maximum Cone Distance: 9"
No. 726 REVACYCLE, GLEASON STRAIGHT BEVEL
$RFQ
No. 726 REVACYCLE, GLEASON STRAIGHT BEVEL
EQUIPPED WITH: Multiple Cutter Bodies Blades Auto Lube Coolant System Motor and Push Button Controls SPECIFICATIONS: Pitch Diameter- Manual: 152mm Face Width At Root-21 Inch Cutters: 28mm Index Ran
MODEL #725 GLEASON STRAIGHT BEVEL GEAR GENERATOR, 1966
$RFQ
MODEL #725 GLEASON STRAIGHT BEVEL GEAR GENERATOR, 1966
EQUIPPED WITH: Electric's 380/3/50 (Dual Wire) Coolant Index Plate Fitted (To Be Advised) Auto Load 25" Dia. Cutter & Deburring Attachment Swarf Conveyor Hydraulic Chucking Attachment W/Drawrod SPECIFICA
MODEL 24R, GLEASON,
$RFQ
MODEL 24R, GLEASON,
EQUIPPED WITH: Setting Gauges Hydraulic Cylinder for Power Chucking Change Gears Two Cutter Blocks With Finishing Cutters Coolant System Auto Lube Operators Manual CATALOGUE SPECIFICATIONS: Capacity: Lo
MODEL SU-SM2TA SAMPUTENSILI GEAR CHAMFERING MACHINE, 1996
$RFQ
MODEL SU-SM2TA SAMPUTENSILI GEAR CHAMFERING MACHINE, 1996
EQUIPPED WITH: Allen Bradley Panelview 1000 Control Automatic Load System Pneumatic Part Clamping Tailstock Coolant Tank W/Pump Manuals and Prints SPECIFICATIONS: Max. Workpiece Diameter: 10", 250mm
MODEL No. SU-SM2TA, SAMPUTENSILI GEAR CHAMFERING MACHINE
$RFQ
MODEL No. SU-SM2TA, SAMPUTENSILI GEAR CHAMFERING MACHINE
EQUIPPED WITH: Allen Bradley Panelview 1000 Control Automatic Load System Tailstock Coolant Tank with Pump Pneumatic Part Clamping Manuals & Prints SPECIFICATIONS: Max. Workpiece Diameter: 10", 250mm
MODEL SM2TA SAMPUTENSILI GEAR CHAMFERING MACHINE, 1997
$RFQ
MODEL SM2TA SAMPUTENSILI GEAR CHAMFERING MACHINE, 1997
EQUIPPED WITH: Allen Bradley Panel View 900 Auto Load Chip Conveyor Coolant Tank & Pump Stack Light SPECIFICATIONS: Max. Workpiece Diameter: 10", 250mm Min. Workpiece Diameter: 3/4", 20mm Max.
NO. SM2TA SAMPUTENSILI GEAR ROLLER
$RFQ
NO. SM2TA SAMPUTENSILI GEAR ROLLER
EQUIPPED WITH: Automatic Shuttle Loading Full Manuals and Wiring Diagrams 480 Volt 60 Hz 3 Phase Power Requirements Miscellaneous Tooling SPECIFICATIONS: Max. Workpiece Di
NO. SM2TA, SU,
$RFQ
NO. SM2TA, SU,
EQUIPPED WITH: Allen Bradly PLC Controls Automatic Shuttle Loading Full Manuals and Wiring Diagrams Miscellaneous Tooling 480 Volt 60 Hz 3 Phase Power Requirements SPECIFICATIONS: Max. Workpiece Diameter: 1
MODEL SM2TA SAMPUTENSILI GEAR CHAMFERING AND DEBURRING MACHINE
$RFQ
MODEL SM2TA SAMPUTENSILI GEAR CHAMFERING AND DEBURRING MACHINE
EQUIPPED WITH: Automatic Shuttle Loading Hydraulic Work Clamping Miscellaneous Tooling Coolant System Lube System Manuals and Wiring Diagrams 480 Volt, 60 Hz, 3-Phase Power Requirement SPECIFICATIONS: Max.
MODEL SM2TA SAMPUTENSILI GEAR CHAMFERING AND DEBURRING MACHINE
$RFQ
MODEL SM2TA SAMPUTENSILI GEAR CHAMFERING AND DEBURRING MACHINE
EQUIPPED WITH: Automatic Shuttle Loading Full Manuals and Wiring Diagrams 480 Volt 60 Hz 3 Phase Power Requirements Miscellaneous Tooling SPECIFICATIONS: Max. Workpiece Diameter: 10", 250mm Min. Workpi
GTR250VG, GLEASON 5-AXIS, CNC GEAR CHAMFER DEBURR POINT ROUND MACHINE NEW 2000
$RFQ
GTR250VG, GLEASON 5-AXIS, CNC GEAR CHAMFER DEBURR POINT ROUND MACHINE NEW 2000
The GTR 250VG is a heavy duty chamfering and deburring machine developed for spur, helical, bevel and hypoid gears and pinions. The 5 Axis CNC machine uses a high speed milling process that is capable of chamferin
NO. 65, CROSS,
$RFQ
NO. 65, CROSS,
EQUIPPED WITH: Complete with Cutter Power Cylinder Work Spindle Change Gears Coolant System Guards Set up for job with cutter SPECIFICATIONS: Capacity Of Coolant Tank: 15 gallons or 56 liters Floor Space
No. GFF, NATIONAL BROACH,
$RFQ
No. GFF, NATIONAL BROACH,
EQUIPPED WITH: 9" Cutter Head Power Stocks Crowning Auto Loader Trabon Lube Heidenhein Scales RS232 Serial Port AC Servo Motors Variable Feed/Speed Cutter Head Coolant W/Magnetic Chip Separator Full Spl
MODEL No. GFF NATIONAL BROACH GEAR SHAVER WITH SERVO DRIVES
$RFQ
MODEL No. GFF NATIONAL BROACH GEAR SHAVER WITH SERVO DRIVES
EQUIPPED WITH: 9" Cutter Head Power Stocks Crowning Auto Loader Trabon Lube Heidenhein Scales RS232 Serial Port AC Servo Motors Variable Feed/Speed Cutter Head Coolant w/Magnetic Chip Seperator Full Spl
No. GFF, NATIONAL BROACH,
$RFQ
No. GFF, NATIONAL BROACH,
EQUIPPED WITH: 9" Cutter Head Power Stocks Crowning Auto Loader Trabon Lube Heidenhein Scales RS232 Serial Port AC Servo Motors Variable Feed/Speed Cutter Head Coolant W/Magnetic Chip Separator Full Spl
MODEL "GCY" 18" NATIONAL BROACH GEAR SHAVER, NEW 1968 RECONDITIONED
$RFQ
MODEL "GCY" 18" NATIONAL BROACH GEAR SHAVER, NEW 1968 RECONDITIONED
EQUIPPED WITH: Crowning 9" Cutter Head Headstock Power Tailstock Coolant Water Guard w/Power Door 220/440/3/60 AC Motor & Control Trabon Lube System Electrical Prints SPECIFICATIONS: Pitch Diameter(
No. GCY, NATIONAL BROACH, 18"Cap,
$RFQ
No. GCY, NATIONAL BROACH, 18"Cap,
EQUIPPED WITH: Crowning 9" Cutter Head Headstock Power Tailstock Coolant Magnetic Chip Seperator Water Guard w/Power Door Trabon Lube System 220/440/3/60 AC Motor & Control Electrical Prints SPECIFICA
MODEL No. GCX,24" NATIONAL BROACH RED RING GEAR SHAVER WITH CROWNING
$RFQ
MODEL No. GCX,24" NATIONAL BROACH RED RING GEAR SHAVER WITH CROWNING
EQUIPPED WITH: 12" Cutter Head Crowning (1) 3 HP, 1800 RPM Work Drive Motor Adjustable Approximate Work Locators "V" Steadyrest For Supporting Shaft Long Machine Table In Place Of Standard Headsto
NO. GCU-12 NATIONAL BROACH, 12" CAP., CROWNING, UPFEED, HEAD & TAILSTOCK, 1980
$RFQ
NO. GCU-12 NATIONAL BROACH, 12" CAP., CROWNING, UPFEED, HEAD & TAILSTOCK, 1980
CATALOG SPECIFICATIONS: Pitch Diameter Capacity .......................... 1-12 Maximum Outer Diameter ........................... 12-3/4" Pitch Range ...................................... 4 - 16 DP Maximum T
MODEL AGW60 KLINGELNBERG GEAR CUTTER SHARPENER
$RFQ
MODEL AGW60 KLINGELNBERG GEAR CUTTER SHARPENER
EQUIPPED WITH: Tailstock With (2) Centers (1) Hob Arbor For Mounting Hobs Trabon Lube System 110 Volt Push Button Controls SPECIFICATIONS: Max. Workpiece Diameter: 190mm, 7.480" Min. Workpiece Root
G961 STAR CUTTER SHARPENER BORZON OR VITRIFIED WHEELS SPEED TO 7000 RPM 1984
$RFQ
G961 STAR CUTTER SHARPENER BORZON OR VITRIFIED WHEELS SPEED TO 7000 RPM 1984
EQUIPPED WITH: Headstock w/Center Power Tailstock w/Center Variable Speed Drive to Spindle 0-7000 rpm Auto Cycle with Second Spark Out Load Meter Travel Dial .001 on Table Travel Tooth Counter Hydraulic Table F
4" #3 BARBER COLMAN, 4"x4" HOB SHARPENER W/EXTRA PLATES, 1946
$RFQ
4" #3 BARBER COLMAN, 4"x4" HOB SHARPENER W/EXTRA PLATES, 1946
EQUIPPED WITH: Head stock/Tailstock Hob Arbor Work Light Grinding Wheel Mount Dresser (12) Index Plates SPECIFICATIONS: Capacity, Diameter of Hob................................4" Capacity, Face of H
MAAG GEAR SHAPER Model: SH-300/500
$RFQ
MAAG GEAR SHAPER Model: SH-300/500
Item Information Class: USED Type: GEAR SHAPERS Manufacturer: MAAG Model: SH-300/500 Serial #: 4072 Price: Request Quote/Info Year: 1991 Max Dia. Gear: 196-7/8 " Description: 196-7/8" maag model sh-300/500
MAAG GEAR SHAPER Model: NBP 40
$RFQ
MAAG GEAR SHAPER Model: NBP 40
Item Information Class: USED Type: GEAR SHAPERS Manufacturer: MAAG Model: NBP 40 Price: Request Quote/Info Max Dia. Gear: 492 " Description: 492" (12,500mm) maag gear shaper model nbp 40. Shipping Dimension
#P630 PFAUTER UNIVERSAL VERTICAL GEAR HOBBING MACHINE
$RFQ
#P630 PFAUTER UNIVERSAL VERTICAL GEAR HOBBING MACHINE
#P630 PFAUTER UNIVERSAL VERTICAL GEAR HOBBING MACHINE MODEL P630 MANUFACTURED 1963 RACO Stock Number R060437 MAXIMUM WORK PIECE DIAMETER ------------------ 24" MAXIMUM MODULE PITCH @ 57% MACHINABILITY --- 2
  • Maximum gear diameter: 24"
    MAAG HSS-60BC Gear Grinder
    $RFQ
    MAAG HSS-60BC Gear Grinder
    Reference #21410 MAAG HSS-60BC Gear Grinder Serial No.: 6601 Age 1976 Max. Gear Width ....................... 12.59" Max. Module ........................... 15 Min. Module ........................... 2
    • Maximum face width: 12.59"
      MAAG SH450/500S Large Capacity Gear Shaper
      $RFQ
      MAAG SH450/500S Large Capacity Gear Shaper
      Reference #20852 MAAG SH450/500S Large Capacity Gear Shaper FEATURES: 69" Dia. Built-In Rotary Table 138" Dia. Additional Table / Sub Plate 186" Dia. Additional Table / Sub Plate JVE Internal Atta
      • Maximum gear diameter: 206"
        MAAG SH250 Large Capacity Gear Shaper
        $RFQ
        MAAG SH250 Large Capacity Gear Shaper
        Reference #20851 MAAG SH250 Large Capacity Gear Shaper FEATURES: Allen Bradley PLC Retrofit in 1999 44" Dia. Built In Rotary Table 95" Dia. Additional Table/ Sub Plate 112"Dia. Additional Table /
        • Maximum gear diameter: 98"
          Gould & Eberhardt Gear Hobber
          $RFQ
          Gould & Eberhardt Gear Hobber
          Reference #19028 GOULD & EBERHARDT 96H Gear Hobber Age: 1952 S/N: 6470A2 CAPACITY: Max. Rated Pitch ...................... 1.5DP Max. Face Capacity For Spur Gears ..... 54" Max. Dia. Cap., w/o Suppo
          • Maximum face width: 48"
            Klingelnberg 10-Axis CNC Gear Cutting Machine
            $RFQ
            Klingelnberg 10-Axis CNC Gear Cutting Machine
            Reference #16326 Klingelnberg 10-Axis CNC Gear Cutting Machine FEATURES: 10-Axis CNC Control Suited For Medium & Large Spiral Bevel & Hypoid Gears 23.6" Maximum Workpiece Diameter Designed High De
            • Maximum gear diameter: 23.6"
              Related Subcategories:
              Categories:
              Condition:
              • X Used (189)
              Manufacturer:
              Location:
              Price:
              •  to 
              1 | 2