buy & sell, new & used machinery, machine tools & equipment

<Prev | 159 | 160 | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | Next>
Refine: Viewing 15901 - 16000 of 20979 matches
Sort by:
Items Per Page:  20 |  50 |  100
Springfield VGC 25, CNC Universal Vertical Spindle Grinder
$0
Springfield VGC 25, CNC Universal Vertical Spindle Grinder
Arriving 1-5-2014
Blanchard #11-16, 16" Vertical Spindle Rotary Surface Grinder
$0
Blanchard #11-16, 16" Vertical Spindle Rotary Surface Grinder
Specifications: Spindle Motor: 15 HP, 240/480 volt, Range: 20" Diameter x 9" Vertical Chuck: 16" Diameter, Chuck Speeds: 15, 24, 41, 64 RPM Grinding Wheel:Cylindrical Full Wheel Style Grinding Wheel S
New Saylor-Beall 5 Hp VT-735-80
$0
New Saylor-Beall 5 Hp VT-735-80
5 Hp, 1 phase, 230 volt motor With Magnetic motor starter Model 705, 2 Stage Cast Iron pump 17.3 cfm air capacity @ 175 psi Auto Stop/Start control Mounted on 80 Gallon Vertical Air Receiver tank L34 x
Kent Model KGS-306-AHD Surface Grinder
$0
Kent Model KGS-306-AHD Surface Grinder
Kent Model KGS-306-AHD Surface Grinder
Giddings & Lewis Chipmaster Radial Arm Drill
$0
Giddings & Lewis Chipmaster Radial Arm Drill
Giddings & Lewis Chipmaster Radial Arm Drill
KAO Ming Radial Arm Drill
$0
KAO Ming Radial Arm Drill
KAO Ming Radial Arm Drill
Blanchard #20HK-36, Geared Head Vertical Spindle Rotary Surface Grinder
$0
Blanchard #20HK-36, Geared Head Vertical Spindle Rotary Surface Grinder
Specifications: 20" Grinding Wheel Diameter 36" Magnetic Chuck Diameter 42" Swing Inside Water Guards 24" Vertical Range 100 HP Grinding Wheel Horsepower Geared Head Design Automatic Down Feed 0 -
New Saylor-Beall 5 Hp VT-735-80, 3 phase motor
$0
New Saylor-Beall 5 Hp VT-735-80, 3 phase motor
5 Hp, 3 phase, 460 volt motor With Magnetic motor starter Model 705, 2 Stage Cast Iron pump 17.3 cfm air capacity @ 175 psi Auto Stop/Start control Mounted on 80 Gallon Vertical Air Receiver tank L34 x
NEW REMEDY MODEL K-45GT SLANT BED GANG STYLE CNC LATHE WITH CENTROID T39W C
$RFQ
NEW REMEDY MODEL K-45GT SLANT BED GANG STYLE CNC LATHE WITH CENTROID T39W C
SPECIFICATIONS TABLE: SLANT BED LATHE LONGITUDINAL TRAVEL (Z AXIS): 7.1” CROSS TRAVEL (X AXIS): 10” SPINDLE NOSE: A2-5 MAX SWING: 6.7” SPINDLE MOTOR/MAX TORQUE: 7.5 HP SPINDLE TAPER
  • Swing: 6.7"
    SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
    $RFQ
    SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
    SPECIFICATIONS TABLE WORKING SURFACE: 9” X 54” LONGITUDINAL TRAVEL: 30” CROSS TRAVEL: 16.5” VERTICAL TRAVEL: 17” LONGITUDINAL FEEDS: 7/8 – 27” LONGITUDINAL RAPID TRAVERSE: 82.5” MOTORS VERTICAL SPINDLE: 3 H
    • Table width: 54"
    • Table length: 9"
      1997 - RAS MODEL 74.25 CNC FOLDING MACHINE, 100″ X 8 GAUGE
      $RFQ
      1997 - RAS MODEL 74.25 CNC FOLDING MACHINE, 100″ X 8 GAUGE
      SPECIFICATIONS MAXIMUM SHEET THICKNESS: 8 GAUGE SMALLEST INNER BEND RADIUS: 1.25X SHEET THICKNESS MINIMUM INSIDE FLANGE HEIGHT: 6X SHEET THICKNESS MAXIMUM LENGTH: 100″ MAXIMUM BACKGAUGE DEPTH: 100″ MINIMUM BACKGAUG
      • Maximum thickness capacity: 8Ga
        - HYD-MECH S-20 SERIES III HORZ BANDSAW - 13" X 18"
        $RFQ
        - HYD-MECH S-20 SERIES III HORZ BANDSAW - 13" X 18"
        SPECIFICATIONS CUTTING CAPACITY AT 90 DEGREES RECTANGULAR: 13″ X 18″ ROUND: 13″ DIAMETER CUTTING CAPACITY AT 45 DEGREES RECTANGULAR: 13″ X 10.75″ ROUND: 12″ DIAMETER CUTTING CAPACITY AT 30 DEGREES RECTANGULAR: 13″ X
        • Width capacity: 18"
        • Height capacity: 13"
          NEW - HANSFORD DAVIS DA-15B KEYSEATER - 1/16" - 1-1/2"
          $RFQ
          NEW - HANSFORD DAVIS DA-15B KEYSEATER - 1/16" - 1-1/2"
          SPECIFICATIONS KEYWAY CUTTING CAPACITY (STEEL): 1/16″ TO 1 1/2″ THROAT DEPTH (FROM FACE OF 1″ WIDE CUTTER TO ARMPOST): 19″ MAXIMUM HEIGHT OF WORK FROM TABLE SURFACE: 12″ MAXIMUM LENGTH OF CUT (WITH 3/4″ THICK BUSHING HOL
          • Keyway width: 1.5"
          • Keyway length: 16"
            NEW - HANSFORD DAVIS DA-15B KEYSEATER - 1/16" - 1-1/2"
            $RFQ
            NEW - HANSFORD DAVIS DA-15B KEYSEATER - 1/16" - 1-1/2"
            SPECIFICATIONS KEYWAY CUTTING CAPACITY (STEEL): 1/16″ TO 1 1/2″ THROAT DEPTH (FROM FACE OF 1″ WIDE CUTTER TO ARMPOST): 19″ MAXIMUM HEIGHT OF WORK FROM TABLE SURFACE: 12″ MAXIMUM LENGTH OF CUT (WITH 3/4″ THICK BUSHING HOL
            • Keyway width: 1.5"
            • Keyway length: 16"
              1963 - BROWN & SHARPE MICROMASTER 618 SURFACE GRINDER - 6" X 18"
              $RFQ
              1963 - BROWN & SHARPE MICROMASTER 618 SURFACE GRINDER - 6" X 18"
              SPECIFICATIONS CAPACITY WIDTH AND LENGTH OF WORK GROUND: 6″ X 18″ HEIGHT OF WORK GROUND WITH 8″ WHEEL: 15″ SPINDLE MOTOR: 1 HP SPEEDS: 3,450 RPM TABLE WORKING SURFACE: 6” X 18” NUMBER OF T-SLOTS: 1 WIDTH OF T-SLOTS: 9
              • Table width: 6"
              • Table length: 18"
                NEW - MARVEL SERIES 8 MARK II UNIVERSAL VERTICAL BANDSAW - 18" X 22"
                $RFQ
                NEW - MARVEL SERIES 8 MARK II UNIVERSAL VERTICAL BANDSAW - 18" X 22"
                SPECIFICATIONS CAPACITY HORIZONTAL: 18″ STD COLUMN VERTICAL: 22″ STD COLUMN VERTICAL @ 45°: 12-1/2″ STD COLUMN SPEED RANGE (INF. VARIABLE): 50 – 450 FPM FEED FORCE: 0 – 140 LBS BLADE DIMENSIONS: 14’6″ L X 1″ W X .035″ T
                • Throat capacity: 18"
                • Height capacity: 22"
                  NEW - MARVEL SERIES 8 MARK II UNIVERSAL VERTICAL BANDSAW - 18" X 22"
                  $RFQ
                  NEW - MARVEL SERIES 8 MARK II UNIVERSAL VERTICAL BANDSAW - 18" X 22"
                  SPECIFICATIONS CAPACITY HORIZONTAL: 18″ STD COLUMN VERTICAL: 22″ STD COLUMN VERTICAL @ 45°: 12-1/2″ STD COLUMN SPEED RANGE (INF. VARIABLE): 50 – 450 FPM FEED FORCE: 0 – 140 LBS BLADE DIMENSIONS: 14’6″ L X 1″ W X .035″ T
                  • Throat capacity: 22"
                  • Height capacity: 18"
                    NEW - MARVEL SERIES 8 MARK II BANDSAW - 18" X 22"
                    $RFQ
                    NEW - MARVEL SERIES 8 MARK II BANDSAW - 18" X 22"
                    SPECIFICATIONS CAPACITY HORIZONTAL: 18″ STD COLUMN VERTICAL: 22″ STD COLUMN VERTICAL @ 45°: 12-1/2″ STD COLUMN SPEED RANGE (INF. VARIABLE): 50 – 450 FPM FEED FORCE: 0 – 140 LBS BLADE DIMENSIONS: 14’6″ L X 1″ W X .035″ T
                    • Throat capacity: 22"
                    • Height capacity: 18"
                      SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
                      $RFQ
                      SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
                      SPECIFICATIONS TABLE WORKING SURFACE: 9” X 54” LONGITUDINAL TRAVEL: 30” CROSS TRAVEL: 16.5” VERTICAL TRAVEL: 17” LONGITUDINAL FEEDS: 7/8 – 27” LONGITUDINAL RAPID TRAVERSE: 82.5” MOTORS VERTICAL SPINDLE: 3 HP HORIZONTAL
                      NEW- REMEDY S25L CNC LATHE - 5C COLLET CHUCK
                      $RFQ
                      NEW- REMEDY S25L CNC LATHE - 5C COLLET CHUCK
                      SPECIFICATIONS TURNING DIAMETER, MAXIMUM: 1" SWING OVER SADDLE: 19.7" SPINDLE NOSE: A2-4 MOTOR: 3 HP SPINDLE SPEED: 50-6000 RPM TRAVELS LONGITUDINAL (Z-AXIS): 6.2" CROSSLIDE (X-AXIS): 7.8" RAPID TRAVEL: 640 IPM CUTTING
                      • Swing: 19.7"
                      • Centers: 6.2"
                        NEW - HANSFORD DAVIS DA-15B KEYSEATER - 1/16" - 1-1/2"
                        $RFQ
                        NEW - HANSFORD DAVIS DA-15B KEYSEATER - 1/16" - 1-1/2"
                        SPECIFICATIONS KEYWAY CUTTING CAPACITY (STEEL): 1/16″ TO 1 1/2″ THROAT DEPTH (FROM FACE OF 1″ WIDE CUTTER TO ARMPOST): 19″ MAXIMUM HEIGHT OF WORK FROM TABLE SURFACE: 12″ MAXIMUM LENGTH OF CUT (WITH 3/4″ THICK BUSHING HOL
                        • Keyway width: 1.5"
                        • Keyway length: 16"
                          K O LEE B2060B MANUAL TOOL & CUTTER GRINDER - 5-1/4" X 37-
                          $RFQ
                          K O LEE B2060B MANUAL TOOL & CUTTER GRINDER - 5-1/4" X 37-
                          SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 32″ DISTANCE BETWEEN CENTERS IN WORKHEAD AND TAILSTOCK: 26″ DISTANCE BETWEEN COLLET IN WORKHEAD AND TAILSTOCK: 27″ DISTANCE BETWEEN B946 CHUCK FACE AND TAILSTOCK (1″ HOLE THROU
                          • Maximum workpiece diameter: 32"
                            MULTIPRESS MODEL WR87M C-FRAME FLOOR TYPE HYDRAULIC PRESS, 8 TON
                            $RFQ
                            MULTIPRESS MODEL WR87M C-FRAME FLOOR TYPE HYDRAULIC PRESS, 8 TON
                            SPECIFICATIONS TONNAGE: 8 TON STROKE: 12″ DAYLIGHT: 16” BED SIZE: 18″ X 11″ THROAT: 7-1/2” MOTOR: 7.5 HP RAM ADVANCE SPEED: 415 IPM RAM PRESS SPEED: 136 IPM RAM RETURN SPEED: 363 IPM PUMP: 7.5 GPM MAXIMUM PRESSURE: 1930
                            • Tonnage: 8T
                            • Stroke: 12"
                              NEW ACER MODEL E-MILL 3VS-II VERTICAL MILL, 9” X 49”
                              $RFQ
                              NEW ACER MODEL E-MILL 3VS-II VERTICAL MILL, 9” X 49”
                              SPECIFICATIONS TABLE SIZE: 9” X 49” QUILL POWER RATE: 0.0015, 0.003, 0.006 IPR LONGITUDINAL TRAVERSE: 34” CROSS TRAVERSE: 12” SPINDLE TAPER: R-8 RAM TRAVERSE: 12” SPINDLE MOTOR: 3 HP VERTICAL TRAVERSE: 16” SPINDLE SPEED
                              • Table width: 9"
                              • Table length: 49"
                                NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL, 10″ X 50″
                                $RFQ
                                NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL, 10″ X 50″
                                SPECIFICATIONS TABLE WORKING SURFACE: 10″ X 50″ T-SLOTS (3): 5/8″ CAPACITY TABLE TRAVEL (X-AXIS): 35″ SADDLE TRAVEL (Y-AXIS): 16.3″ RAM TRAVEL: 18.5″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 15.3″ THROAT DIST
                                • Table width: 10"
                                • Table length: 50"
                                  NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL WITH AUTO LUBE PUMP, 10″ X 50″
                                  $RFQ
                                  NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL WITH AUTO LUBE PUMP, 10″ X 50″
                                  SPECIFICATIONS TABLE WORKING SURFACE: 10″ X 50″ T-SLOTS (3): 5/8″ CAPACITY TABLE TRAVEL (X-AXIS): 35″ SADDLE TRAVEL (Y-AXIS): 16.3″ RAM TRAVEL: 18.5″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 15.3″ THROAT DISTANCE (MIN –
                                  • Table width: 10"
                                  • Table length: 50"
                                    SCOTCHMAN CHANNEL SHEAR - 2" - 6"
                                    $RFQ
                                    SCOTCHMAN CHANNEL SHEAR - 2" - 6"
                                    THIS CHANNEL SHEAR IS DESIGNED TO USE WITH A SCOTCHMAN IRONWORKERS (65 TON, 90 TON OR 120 TON) SPECIFICATIONS ADJUSTABLE: 2″ TO 6″ STANDARD CHANNEL: 5” DIMENSIONS: 20″ LR X 10″ FB X 18″ H WEIGHT: 110 LBS
                                    NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                    $RFQ
                                    NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                    SPECIFICATIONS TABLE WORKING SURFACE: 9″ X 50″ T SLOTS (3): 5/8″ LOAD CAPACITY: 660 LBS CAPACITY TABLE TRAVEL (X-AXIS): 36″ SADDLE TRAVEL (Y-AXIS): 12″ RAM TRAVEL: 12″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 16″ SPINDLE
                                    • Table width: 9"
                                    • Table length: 50"
                                      NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                      $RFQ
                                      NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                      SPECIFICATIONS TABLE WORKING SURFACE: 9″ X 50″ T SLOTS (3): 5/8″ LOAD CAPACITY: 660 LBS CAPACITY TABLE TRAVEL (X-AXIS): 36″ SADDLE TRAVEL (Y-AXIS): 12″ RAM TRAVEL: 12″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 16″ SPINDLE
                                      • Table width: 9"
                                      • Table length: 50"
                                        NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                        $RFQ
                                        NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                        SPECIFICATIONS TABLE WORKING SURFACE: 9″ X 50″ T SLOTS (3): 5/8″ LOAD CAPACITY: 660 LBS CAPACITY TABLE TRAVEL (X-AXIS): 36″ SADDLE TRAVEL (Y-AXIS): 12″ RAM TRAVEL: 12″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 16″ SPINDLE
                                        • Table width: 9"
                                        • Table length: 50"
                                          1989 - HANKOOK MODEL PROTEC-28 HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE, 28” X 98”
                                          $RFQ
                                          1989 - HANKOOK MODEL PROTEC-28 HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE, 28” X 98”
                                          SPECIFICATIONS SWING OVER BED: 28” SWING OVER CARRIAGE: 18-7/8” SWING OVER GAP: 37-3/4” LENGTH OF GAP IN FRONT OF FACE PLATE: 10-5/8″ CENTER DISTANCE: 98″ HOLE THROUGH SPINDLE: 4-1/8” TAPER OF SPINDLE HOLE: METRIC TAPER
                                          • Swing: 28"
                                          • Centers: 90"
                                            STANDARD MODERN MODEL 2080 GEARED HEAD ENGINE LATHE, 20" X 80"
                                            $RFQ
                                            STANDARD MODERN MODEL 2080 GEARED HEAD ENGINE LATHE, 20" X 80"
                                            SPECIFICATIONS SWING OVER BED: 22” SWING OVER BED AND SADDLE WAYS: 20” SWING OVER CROSS SLIDE: 12” CENTER DISTANCE: 80" MAIN DRIVE MOTOR: 15 HP BAR CAPACITY 3" HEADSTOCK SPINDLE SPEEDS (18): 27 – 1600 RPM SPINDLE NOSE
                                            • Swing: 22"
                                            • Centers: 80"
                                              LEBLOND REGAL 19E7 ENGINE LATHE - 19" X 96"
                                              $RFQ
                                              LEBLOND REGAL 19E7 ENGINE LATHE - 19" X 96"
                                              SPECIFICATIONS CAPACITY SWING OVER BED & CARRIAGE WINGS: 19-1/4″ SWING OVER CROSS SLIDE: 12-1/4″ DISTANCE BETWEEN CENTERS: 96″ HEADSTOCK SPINDLE SPEEDS, NUMBER: 12 SPINDLE SPEED RANGE, LOW: 25 – 1,000 RPM SPINDLE SPEED
                                              • Swing: 19"
                                              • Centers: 96"
                                                1997 - DAKE EUROMATIC 370PP FERROUS TYPE AUTOMATIC COLD SAW, 14-1/2″ BLADE
                                                $RFQ
                                                1997 - DAKE EUROMATIC 370PP FERROUS TYPE AUTOMATIC COLD SAW, 14-1/2″ BLADE
                                                SPECIFICATIONS MAXIMUM BLADE SIZE: 14-1/2” MAXIMUM VISE OPENING: 8-3/4” MAXIMUM FEED VISE OPENING: 6-1/2” MOTOR: 3.5/4.5 HP BLADE SPEEDS: 25/50 RPM ROUND SOLID AT 90°: 4″ ROUND SOLID AT 45°: 3-5/8” ROUND TUBING AT 90°: 5
                                                • Blade diameter: 14"
                                                  NEW - KINGSTON MODEL HJ 1100 HIGH SPEED PRECISION GAP BED LATHE, 17" X 43"
                                                  $RFQ
                                                  NEW - KINGSTON MODEL HJ 1100 HIGH SPEED PRECISION GAP BED LATHE, 17" X 43"
                                                  SPECIFICATIONS SWING OVER BED: 17″ SWING OVER CROSS SLIDE: 10-9/16″ SWING OVER GAP: 24″ LENGTH IN FRONT OF FACE PLATE: 5-7/8″ HEIGHT BETWEEN FLOOR SURFACE AND CENTER LINE: 42-3/8″ DISTANCE BETWEEN CENTERS: 43-1/2″ SPINDL
                                                  NEW - KINGSTON MODEL HJ 1100 HIGH SPEED PRECISION GAP BED LATHE, 17" X 43"
                                                  $RFQ
                                                  NEW - KINGSTON MODEL HJ 1100 HIGH SPEED PRECISION GAP BED LATHE, 17" X 43"
                                                  SPECIFICATIONS SWING OVER BED: 17″ SWING OVER CROSS SLIDE: 10-9/16″ SWING OVER GAP: 24″ LENGTH IN FRONT OF FACE PLATE: 5-7/8″ HEIGHT BETWEEN FLOOR SURFACE AND CENTER LINE: 42-3/8″ DISTANCE BETWEEN CENTERS: 43-1/2″ SPINDL
                                                  • Swing: 17"
                                                  • Centers: 43"
                                                    2001 - HARDINGE VMC800II VMC - 30" X 20" X 20"
                                                    $RFQ
                                                    2001 - HARDINGE VMC800II VMC - 30" X 20" X 20"
                                                    SPECIFICATIONS TRAVELS X-AXIS: 31.50” Y-AXIS: 20.08” Z-AXIS: 20.08” Y-AXIS THROAT DISTANCE: 23” TABLE WIDTH: 20.00” LENGTH: 36.40” LOAD CAPACITY: 1,540 LBS T-SLOTS (# & SIZE): .708” X 3 X 6.3” SPINDLE TAPER: 40 SPEED
                                                    • X axis: 30"
                                                    • Y axis: 20"
                                                      1993 - SUPERMAX MODEL MAX 8 GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 6
                                                      $RFQ
                                                      1993 - SUPERMAX MODEL MAX 8 GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 6
                                                      SPECIFICATIONS SPINDLE SPINDLE SPEED: 4000 RPM SPINDLE TAPER: CT-50 FRONT BEARING DIAMETER: 3.94″ TRAVEL X-TRAVEL: 65″ Y-TRAVEL: 27.5″ Z-TRAVEL: 27.5″ DISTANCE BETWEEN SPINDLE NOSE AND TABLE TOP: 7.87″ – 35.4″ DISTANCE
                                                      • X axis: 65"
                                                      • Y axis: 27"
                                                        1969 -AMERICAN PACEMAKER STYLE H HEAVY DUTY, STRAIGHT BED ENGINE LATHE, 39-3/4” X 48”
                                                        $RFQ
                                                        1969 -AMERICAN PACEMAKER STYLE H HEAVY DUTY, STRAIGHT BED ENGINE LATHE, 39-3/4” X 48”
                                                        SPECIFICATIONS SWING OVER BED (ACTUAL): 39-3/4″ SWING OVER CARRIAGE WINGS: 36-1/2” SWING OVER CROSS SLIDE: 26″ CENTERS: 48” SPINDLE SPEEDS: 7.5 – 750 RPM HEADSTOCK LENGTH ON BED: 49-1/2” RADIAL LOAD CAPACITY, FRONT BEAR
                                                        • Swing: 39.75"
                                                        • Centers: 48"
                                                          1979 - HARIG SUPER 618 2-AXIS SURFACE GRINDER - 6" X 18"
                                                          $RFQ
                                                          1979 - HARIG SUPER 618 2-AXIS SURFACE GRINDER - 6" X 18"
                                                          SPECIFICATIONS LONGITUDINAL TRAVEL: 18 ¾” CROSSFEED TRAVEL: 6 ¾” VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL): 12″ PLATEN WORKING AREA: 6″ X 18″ GRINDING WHEEL FURNISHED: 7″ X ½” X 1 ¼” GRINDING WHEEL MAXIMUM CAPACITY: 8″ X
                                                          • Table width: 6"
                                                          • Table length: 18"
                                                            3000 - KINGSTON HJ-1100 GAP BED ENGINE LATHE - 17" X 43"
                                                            $RFQ
                                                            3000 - KINGSTON HJ-1100 GAP BED ENGINE LATHE - 17" X 43"
                                                            SPECIFICATIONS SWING OVER BED: 17″ SWING OVER CROSS SLIDE: 10-9/16″ SWING OVER GAP: 24″ LENGTH IN FRONT OF FACE PLATE: 5-7/8″ HEIGHT BETWEEN FLOOR SURFACE AND CENTER LINE: 42-3/8″ DISTANCE BETWEEN CENTERS: 43-1/2″ SPINDL
                                                            • Swing: 17"
                                                            • Centers: 43"
                                                              HARDINGE 7 VERT CUT-OFF SLIDE
                                                              $RFQ
                                                              HARDINGE 7 VERT CUT-OFF SLIDE
                                                              SPECIFICATIONS FOR HARDINGE HC CHUCKERS
                                                              ENSHU MODEL VA VERTICAL BED MILL, 43-1/4″ X 10-1/4″
                                                              $4,950
                                                              ENSHU MODEL VA VERTICAL BED MILL, 43-1/4″ X 10-1/4″
                                                              SPECIFICATIONS TABLE LONGITUDINAL TRAVEL: 23-5/8″ CROSS TRAVEL: 7-7/8″ VERTICAL TRAVEL: 15-3/4″ WORKING SURFACE: 43-1/4″ X 10-1/4″ TEE SLOTS NUMBER: 3 WIDTH: 5/8″ INTERVAL: 2-3/8″ LONGITUDINAL FEED SPEED RANGE: 1-1/2 –
                                                              • Table width: 10"
                                                              • Table length: 43"
                                                                USED ROCKWELL 15-665 MULTI SPDL DRILL - 15" 2 SPINDLE
                                                                $RFQ
                                                                USED ROCKWELL 15-665 MULTI SPDL DRILL - 15" 2 SPINDLE
                                                                SPECIFICATIONS DRILL TO CENTER OF CIRCLE: 15” STEP PULLEY: 5 STEPS COLUMN: 3” WIDE X 38” HIGH COOLANT TABLE: 24” X 28” EQUIPPED WITH JACOBS CHUCKS
                                                                • # Spindles: #2
                                                                  1991 - HECKERT MODEL FW400E HEAVY DUTY PLAIN HORIZONTAL MILL WITH (2) VERTICAL HEADS, 16”
                                                                  $RFQ
                                                                  1991 - HECKERT MODEL FW400E HEAVY DUTY PLAIN HORIZONTAL MILL WITH (2) VERTICAL HEADS, 16”
                                                                  SPECIFICATIONS TABLE WORKING SURFACE: 15-3/4” x 63” NUMBER OF T-SLOTS: 5 WIDTH OF T-SLOTS: 11/16″ MAXIMUM WEIGHT ON TABLE: 3,300 LBS TRAVELS LONGITUDINAL: 44″ CROSS: 14″ VERTICAL: 24-3/4″ SPINDLE TAPER: #50 SPEEDS (18
                                                                  USED YOSHIDA YR5-115 RADIAL DRILL - 45" X 12"
                                                                  $RFQ
                                                                  USED YOSHIDA YR5-115 RADIAL DRILL - 45" X 12"
                                                                  SPECIFICATIONS CAPACITIES MAXIMUM DISTANCE, COLUMN SURFACE TO SPINDLE END: 45-1/4” MINIMUM DISTANCE, COLUMN SURFACE TO SPINDLE END: 11-1/16” MAXIMUM DISTANCE, BASE TOP TO SPINDLE END: 50-13/16” MINIMUM DISTANCE, BASE TO
                                                                  • Arm length: 37'
                                                                  • Column diameter: 12"
                                                                    1982 -LAGUN MODEL FTV-1 VERTICAL MILL, 10″ X 44″
                                                                    $RFQ
                                                                    1982 -LAGUN MODEL FTV-1 VERTICAL MILL, 10″ X 44″
                                                                    SPECIFICATIONS TABLE SIZE: 44” X 10” TRAVERSE LONGITUDINAL TRAVEL MANUAL: 29.5” LONGITUDINAL TRAVEL WITH POWER FEED: 26” CROSS TRAVEL: 16” MAXIMUM VERTICAL CAPACITY: 18.5” VERTICAL KNEE TRAVEL: 16” RAM TRAVEL: 16” HEA
                                                                    • Table width: 10"
                                                                    • Table length: 44"
                                                                      1997 - HERCULES SPM-630 GAP BED ENGINE LATHE - 25" X 157"
                                                                      $RFQ
                                                                      1997 - HERCULES SPM-630 GAP BED ENGINE LATHE - 25" X 157"
                                                                      SPECIFICATIONS CAPACITIES SWING OVER BED: 25″ SWING OVER GAP: 35″ SWING OVER CROSS SLIDE: 16″ HEIGHT OF CENTERS: 12″ MAXIMUM WEIGHT BETWEEN CENTERS: 3306 LBS DISTANCE BETWEEN CENTERS: 157.480″ CROSS SLIDE STROKE: 13″ H
                                                                      • Swing: 25"
                                                                      • Centers: 157"
                                                                        1981 - DO-ALL MODEL C-1220A AUTOMATIC HORIZONTAL BANDSAW, 12″ X 20″
                                                                        $RFQ
                                                                        1981 - DO-ALL MODEL C-1220A AUTOMATIC HORIZONTAL BANDSAW, 12″ X 20″
                                                                        SPECIFICATIONS RECTANGLE CAPACITY: 12″ X 20″ ROUND CAPACITY: 16″ BLADE: 1.5″ X .050″ X 186″ DRIVE: 10 HP SPEED: 85-450 FPM INDEX: 0-24” PULL-UP FORCE: 3,300 LBS GENERAL FLOOR AREA: 139” X 85” NET WEIGHT, APPROX: 5,800 L
                                                                        • Width capacity: 20"
                                                                        • Height capacity: 12"
                                                                          NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                                                          $RFQ
                                                                          NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
                                                                          SPECIFICATIONS TABLE WORKING SURFACE: 9″ X 50″ T SLOTS (3): 5/8″ LOAD CAPACITY: 660 LBS CAPACITY TABLE TRAVEL (X-AXIS): 36″ SADDLE TRAVEL (Y-AXIS): 12″ RAM TRAVEL: 12″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 16″ SPINDLE
                                                                          • Table width: 9"
                                                                          • Table length: 50"
                                                                            NEW- SCOTCHMAN 50514CM IRONWORKER - 50 TON
                                                                            $RFQ
                                                                            NEW- SCOTCHMAN 50514CM IRONWORKER - 50 TON
                                                                            SPECIFICATIONS (RATED ON 36 MILD STEEL) PUNCHING CAPACITY: 50 TON 1-1/4″ IN 1/2″ 13/16″ IN 3/4″ THROAT DEPTH: 6″ FLAT BAR SHEAR: 14″ LENGTH 3/4″ X 4″ 1/2″ X 8″ 3/8″ X 10″ 1/4″ X 14″ ANGLE SHEAR (90 DEG.): 4″ X 4″ X 3/8″
                                                                            • Angle L1: 4"
                                                                            • Angle L2: 4"
                                                                              NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
                                                                              $RFQ
                                                                              NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
                                                                              SPECIFICATIONS MAXIMUM SHEARING CAPACITY, MILD STEEL: 16 GA MAXIMUM SHEARING CAPACITY, STAINLESS STEEL: 20 GA MAXIMUM CUTTING LENGTH: 52-1/4″ BACK GAUGE RANGE: 30″ FRONT GAUGE RANGE: 37″ GENERAL FLOOR SPACE, GAUGES IN P
                                                                              • Maximum thickness: 16Ga
                                                                              • Cutting length: 52"
                                                                                NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
                                                                                $RFQ
                                                                                NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
                                                                                SPECIFICATIONS MAXIMUM SHEARING CAPACITY, MILD STEEL: 16 GA MAXIMUM SHEARING CAPACITY, STAINLESS STEEL: 20 GA MAXIMUM CUTTING LENGTH: 52-1/4″ BACK GAUGE RANGE: 30″ FRONT GAUGE RANGE: 37″ GENERAL FLOOR SPACE, GAUGES IN P
                                                                                • Maximum thickness: 62Ga
                                                                                • Cutting length: 52"
                                                                                  3000 - SCOTCHMAN BEWO CP0350LT COLD SAW - 14"
                                                                                  $RFQ
                                                                                  3000 - SCOTCHMAN BEWO CP0350LT COLD SAW - 14"
                                                                                  SPECIFICATIONS CUTTING SPEEDS: SPEED 1 / SPEED 2: 22 / 44 RPM MOTOR RATE: 3 HP MAXIMUM BLADE DIAMETER: 14″ ARBOR BORE: 1-9/16″ PIN SPACING: 4 / 12 / 64 CAPACITIES WITH MAXIMUM DIAMETER BLADES TUBING 90° ROUND: 4-71/2″
                                                                                  • Blade diameter: 14"
                                                                                    NEW - HYD-MECH S-20 SERIES III PIVOT BANDSAW - 13" X 18"
                                                                                    $RFQ
                                                                                    NEW - HYD-MECH S-20 SERIES III PIVOT BANDSAW - 13" X 18"
                                                                                    SPECIFICATIONS CUTTING CAPACITY AT 90 DEGREES RECTANGULAR: 13″ X 18″ ROUND: 13″ DIAMETER CUTTING CAPACITY AT 45 DEGREES RECTANGULAR: 13″ X 10.75″ ROUND: 12″ DIAMETER CUTTING CAPACITY AT 30 DEGREES RECTANGULAR: 13″ X 7
                                                                                    • Width capacity: 18"
                                                                                    • Height capacity: 13"
                                                                                      NEW - MARVEL SPARTAN PA360EPC HORZ BANDSAW - 14" X 14"
                                                                                      $RFQ
                                                                                      NEW - MARVEL SPARTAN PA360EPC HORZ BANDSAW - 14" X 14"
                                                                                      SPECIFICATIONS CUTTING CAPACITIES SQUARE: 14” X 14” ROUND: 14” BLADE: 1-1/4” X .042” X 14’6” AUTOMATIC BAR FEED MAX LOAD CAPACITY: 6,250 LBS AUTOMATIC BAR FEED MAX TRAVEL 1 INDEX: 20″ AUTOMATIC BAR FEED MAX INDEXES, MUL
                                                                                      • Width capacity: 14"
                                                                                      • Height capacity: 14"
                                                                                        2000 - CHIP BLASTER CV36-1000 COOLANT SYSTEM - 1000 PSI
                                                                                        $RFQ
                                                                                        2000 - CHIP BLASTER CV36-1000 COOLANT SYSTEM - 1000 PSI
                                                                                        SPECIFICATIONS MAXIMUM PRESSURE: 1000 PSI DELIVERY VOLUME: 3 – 36 GPM COOLANT TANK VOLUME: 240 GALLON (DUAL FILTER) HIGH PRESSURE PUMP: 30 HP STANDARD FILTER ELEMENT: 5 MICRON HIGH PRESSURE OUTLETS: 2 APPROXIMATE SOUND L
                                                                                        • Tank capacity: 240Gal
                                                                                        • Motor: 30HP
                                                                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                                                                          $RFQ
                                                                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                                                                          SPECIFICATIONS OSCILLATING WHEELS (2): 5-1/2” TABLE: 13” X 5-1/2” GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH MITERING GAUGE
                                                                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                                                                          $RFQ
                                                                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                                                                          SPECIFICATIONS OSCILLATING WHEELS (2): 5-1/2” TABLE: 13” X 5-1/2” GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH MITERING GAUGE
                                                                                          USED LOCKFORMER MODEL L-810 ROLLFORMER, 10 STAND X 1-3/8″ X 12″
                                                                                          $RFQ
                                                                                          USED LOCKFORMER MODEL L-810 ROLLFORMER, 10 STAND X 1-3/8″ X 12″
                                                                                          SPECIFICATIONS STANDS: 10 ROLL SHAFT DIAMETER: 1-3/8″ KEYWAY SIZE: 1/4″ ROLL SPACE: 12″ CENTER, 3-1/2″ OUTSIDE HORIZONTAL CENTERS: 8″ VERTICAL CENTER: 5″ BASE TO LOWER SHAFT: 7-1/2″ LINE DIRECTION: RIGHT TO LEFT GENERAL
                                                                                          • # Stands: #10
                                                                                          • Roll diameter: 1.375"
                                                                                            NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL WITH AUTO LUBE PUMP, 10″ X 50″
                                                                                            $RFQ
                                                                                            NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL WITH AUTO LUBE PUMP, 10″ X 50″
                                                                                            SPECIFICATIONS TABLE WORKING SURFACE: 10″ X 50″ T-SLOTS (3): 5/8″ CAPACITY TABLE TRAVEL (X-AXIS): 35″ SADDLE TRAVEL (Y-AXIS): 16.3″ RAM TRAVEL: 18.5″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 15.3″ THROAT DISTANCE (MIN –
                                                                                            • Table width: 10"
                                                                                            • Table length: 50"
                                                                                              2001 - KAO MING KMR-1100S RADIAL DRILL - 4' X 11"
                                                                                              $RFQ
                                                                                              2001 - KAO MING KMR-1100S RADIAL DRILL - 4' X 11"
                                                                                              SPECIFICATIONS DISTANCE FROM SPINDLE CENTER AND COLUMN CENTER: 19-7/8” – 49-1/4” DISTANCE BETWEEN SPINDLE CENTER AND COLUMN FACE: 14” – 43-5/16” DISTANCE OF SPINDLE TO BASE SURFACE: 13-9/16” – 49-13/16” COLUMN DIAMETER:
                                                                                              • Arm length: 4'
                                                                                              • Column diameter: 11"
                                                                                                1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                                                                                                $RFQ
                                                                                                1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                                                                                                SPECIFICATIONS TABLE WORKING SURFACE: 40.1″ X 15.7″ TABLE T-SLOTS: 3 X .71″ ON 4.92″ CENTERS TABLE LOAD W/UNIFORM DISTRIBUTION: 1,100 LBS SPINDLE MOTOR HORSEPOWER, (30 MINUTES): 10 HP HORSEPOWER, (CONTINUOUS): 7.5 HP T
                                                                                                • X axis: 30"
                                                                                                • Y axis: 18"
                                                                                                  NEW - KINGSTON MODEL HD-2290, 4″ LARGE BORE HIGH SPEED PRECISION GAP BED LATHE, 22″ X 90″
                                                                                                  $RFQ
                                                                                                  NEW - KINGSTON MODEL HD-2290, 4″ LARGE BORE HIGH SPEED PRECISION GAP BED LATHE, 22″ X 90″
                                                                                                  SPECIFICATIONS CAPACITY SWING OVER BED: 22″ SWING OVER CROSS SLIDE: 13″ SWING IN GAP: 31-3/8″ GAP WIDTH IN FRONT OF FACE PLATE: 10-5/8″ DISTANCE BETWEEN CENTERS: 90″ WIDTH OF BED: 15-3/4″ MAXIMUM TRAVEL OF COMPOUND: 9-1
                                                                                                  • Swing: 22"
                                                                                                  • Centers: 90"
                                                                                                    USED GIDDINGS & LEWIS CHIPMASTER RADIAL DRILL - 4' X 9"
                                                                                                    $RFQ
                                                                                                    USED GIDDINGS & LEWIS CHIPMASTER RADIAL DRILL - 4' X 9"
                                                                                                    SPECIFICATIONS DISTANCE SPINDLE TO COLUMN FACE: 48″ COLUMN DIAMETER: 9″ SPINDLE SPEEDS (9): 60-1200 RPM SPINDLE TAPER: 4 MT FEEDS: .004, .008, .014, .020 GENERAL ELECTRICS: 208 VOLTS, 3 PH, 60 CYC DIMENSIONS: 92″ L-R, 3
                                                                                                    • Arm length: 4'
                                                                                                    • Column diameter: 9"
                                                                                                      USED JONES & LAMSON MODEL FC-14 OPTICAL COMPARATOR, 14"
                                                                                                      $RFQ
                                                                                                      USED JONES & LAMSON MODEL FC-14 OPTICAL COMPARATOR, 14"
                                                                                                      SPECIFICATIONS SCREEN DIAMETER: 14″ C/L GLASS CHART WORK TABLE: 6″ X 30″ HARD CHROMIUM PLATED MEASURING CAPACITY LONGITUDINAL TABLE TRAVEL: 8″ MANUAL TRAVEL W/ ACU-RITE GLASS SCALE (.001mm/.00005″ RESOLUTION) VERTICAL T
                                                                                                      • Screen diameter: 14"
                                                                                                        1987 - DO-ALL C-260A AUTOMATIC HORIZONTAL POWER BANDSAW - 10-1/4" X 12"
                                                                                                        $RFQ
                                                                                                        1987 - DO-ALL C-260A AUTOMATIC HORIZONTAL POWER BANDSAW - 10-1/4" X 12"
                                                                                                        SPECIFICATIONS CUTTING CAPACITIES RECTANGULAR: 10-1/4″ X 12″ ROUND : 10-1/4″ BLADE: 1-1/4” X 138″ X .042” VARIABLE SPEED DRIVE MOTOR: 5 HP SHUTTLE VISE STROKE: 24” GENERAL FLOOR SPACE: 7’ X 6’ X 4’ NET WEIGHT: 4,200 LBS
                                                                                                        • Width capacity: 12"
                                                                                                        • Height capacity: 10.25"
                                                                                                          HARDINGE 6-POSITION BED TURRET FOR DSM-59
                                                                                                          $RFQ
                                                                                                          HARDINGE 6-POSITION BED TURRET FOR DSM-59
                                                                                                          SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
                                                                                                          1969 - HARDINGE HSL-59 SPEED LATHE - 9"
                                                                                                          $RFQ
                                                                                                          1969 - HARDINGE HSL-59 SPEED LATHE - 9"
                                                                                                          SPECIFICATIONS TAPERED SPINDLE SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16″ WITH HEXAGON 5C COLLETS: 7/8″ WITH SQUARE 5C COLLETS: 3/4″ WITH STEP CHUCKS: 6″ WITH JAW CHUCKS: 5″ WITH EXPANDING COLLETS: 3″ SPINDLE SPE
                                                                                                          • Swing: 9"
                                                                                                          • Centers: 10"
                                                                                                            ANGLE PLATE - 30" X 42" X 12"
                                                                                                            $RFQ
                                                                                                            ANGLE PLATE - 30" X 42" X 12"
                                                                                                            SPECIFICATIONS OVERALL HEIGHT: 30” WIDTH (L-R): 42” DEPTH (F-B): 12” FRONT PLATE THICKNESS: 1.5” MATERIAL: STEEL FABRICATED EQUIPPED WITH DRILLED AND TAPPED HOLES
                                                                                                            NEW - TENNSMITH HB97-16 HEAVY DUTY STRAIGHT BENDING BRAKE - 97" X 16 GA
                                                                                                            $RFQ
                                                                                                            NEW - TENNSMITH HB97-16 HEAVY DUTY STRAIGHT BENDING BRAKE - 97" X 16 GA
                                                                                                            SPECIFICATIONS CAPACITY, MILD STEEL: 16 GA BENDING LENGTH: 97" LIFT OF BEAM (MAX.): 1-7/8" FRONT TO REAR BEAM ADJUSTMENT: 1/2" REVERSE BEND (MIN.): 1/4" FLANGE IN CAPACITY MATERIAL (MIN.): 1" GENERAL DIMENSIONS, COUNT
                                                                                                            (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                                                                            $RFQ
                                                                                                            (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                                                                            QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
                                                                                                            (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                                                                            $RFQ
                                                                                                            (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                                                                            QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
                                                                                                            (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                                                                            $RFQ
                                                                                                            (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                                                                            QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
                                                                                                            NEW - BISON "SET-TRU" SCROLL CHUCK - 6" 3-JAW
                                                                                                            $RFQ
                                                                                                            NEW - BISON "SET-TRU" SCROLL CHUCK - 6" 3-JAW
                                                                                                            SPECIFICATIONS TYPE: 3-JAW CHUCK DIAMETER: 6” THRU HOLE SIZE: 1.654” BODY MATERIAL: STEEL
                                                                                                            1962 - HARDINGE DSM-59R TURRET LATHE - 1-1/16"
                                                                                                            $RFQ
                                                                                                            1962 - HARDINGE DSM-59R TURRET LATHE - 1-1/16"
                                                                                                            SPECIFICATIONS SPINDLE SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING SPINDLE TYPE: HARDINGE BS #21 10 SPINDLE SPEEDS: 450 TO 4000 RPM CAPACITY BED LENGTH (FROM SPINDLE FACE): 29″ SWING OVER BED: 9″ COOLANT SUM
                                                                                                            JONES & LAMSON MODEL TC-14 OPTICAL COMPARATOR, 14"
                                                                                                            $RFQ
                                                                                                            JONES & LAMSON MODEL TC-14 OPTICAL COMPARATOR, 14"
                                                                                                            SPECIFICATIONS SCREEN DIAMETER: 14″ W/ RIGHT ANGLE & 60 DEGREE LINES WORK TABLE: 5″ X 16″ HARD CHROMIUM PLATED MEASURING CAPACITY LONGITUDINAL TABLE TRAVEL: 4″ MANUAL TRAVEL W/ ACU-RITE GLASS SCALE (0.001mm/0.0001″ RESO
                                                                                                            • Screen diameter: 14"
                                                                                                              VICTOR MODEL 380V VARIABLE SPEED VERTICAL MILL, 10″ X 50″
                                                                                                              $RFQ
                                                                                                              VICTOR MODEL 380V VARIABLE SPEED VERTICAL MILL, 10″ X 50″
                                                                                                              SPECIFICATIONS WORKING SURFACE: 10″ X 50″ TRAVELS X-AXIS: 36″ Y-AXIS: 16″ Z-AXIS: 16″ QUILL: 5″ COLLET CAPACITY: 1/4 – 1” SPINDLE TAPER: R8 HORSEPOWER: 3 HP SPINDLE SPEED, VARIABLE SPEED: 60 – 4200 RPM POWER FEED PER SP
                                                                                                              • Table width: 10"
                                                                                                              • Table length: 50"
                                                                                                                USED WMW BR40X1250 RADIAL DRILL - 4' X 12"
                                                                                                                $RFQ
                                                                                                                USED WMW BR40X1250 RADIAL DRILL - 4' X 12"
                                                                                                                SPECIFICATIONS DIMENSIONS COLUMN DIAMETER: 12” DISTANCE FROM CENTER OF DRILL TO SPINDLE COLUMN: 11.8 – 49” DISTANCE FROM SPINDLE TO BASE PLATE: 14.75” – 54” SWING RADIUS OF DRILL SPINDLE: 17.7” – 55” SWING RANGE OF ARM:
                                                                                                                • Arm length: 4'
                                                                                                                • Column diameter: 12"
                                                                                                                  1967 - DO-ALL 2612-2H VERTICLE BANDSAW - 26"
                                                                                                                  $RFQ
                                                                                                                  1967 - DO-ALL 2612-2H VERTICLE BANDSAW - 26"
                                                                                                                  SPECIFICATIONS THROAT: 26″ WORK HEIGHT UNDER GUIDE: 12″ BLADE WIDTH CAPACITY: 1/8″ – 1″ BLADE LENGTH: 177″ WELDER CAPACITY: 1/8 – 1” VARIABLE BAND SPEED RANGE: 25 – 6000 SFM VARIABLE POWER FEED RANGE: 0 – 350 LBS MAIN TA
                                                                                                                  • Throat capacity: 26"
                                                                                                                  • Height capacity: 12"
                                                                                                                    KITAGAWA 12" 3-JAW CHUCK
                                                                                                                    $RFQ
                                                                                                                    KITAGAWA 12" 3-JAW CHUCK
                                                                                                                    SPECIFICATIONS DIAMETER: 12” THROUGH HOLE: 3-11/16″ SPINDLE MOUNT: A2-11
                                                                                                                    KITAGAWA 10" 3-JAW CHUCK
                                                                                                                    $RFQ
                                                                                                                    KITAGAWA 10" 3-JAW CHUCK
                                                                                                                    SPECIFICATIONS DIAMETER: 10” THROUGH HOLE: 2-7/8” SPINDLE MOUNT: A2-8
                                                                                                                    1990 - REPUBLIC LAGUN MODEL FU3-LA UNIVERSAL HORIZONTAL KNEE MILL, 13” x 63”
                                                                                                                    $RFQ
                                                                                                                    1990 - REPUBLIC LAGUN MODEL FU3-LA UNIVERSAL HORIZONTAL KNEE MILL, 13” x 63”
                                                                                                                    SPECIFICATIONS TABLE: 63″ X 13″ T-SLOTS IN TABLE: 3 X 3/4″ LONGITUDINAL FEED: 46″ CROSS FEED: 13 3/8″ VERTICAL FEED: 18 1/2″ NUMBER OF FEED CHANGES: 18 RANGE-LONGITUDINAL & CROSS: 1/2 TO 31 1/2″ RANGE VERTICAL: 1/8″ TO
                                                                                                                    USED DIAMOND GROUND DGP-3 BENCH MOUNTED TUNGSTEN GRINDER - 6"
                                                                                                                    $RFQ
                                                                                                                    USED DIAMOND GROUND DGP-3 BENCH MOUNTED TUNGSTEN GRINDER - 6"
                                                                                                                    SPECIFICATIONS BENCH MOUNTED TUNGSTEN GRINDER DESIGNED FOR ORBITAL USERS. BLADE CUT-OFF: 6″ AMPS: 5 ELECTRICS: 110 VOLTS EQUIPPED WITH PRECISION CUT-OFF ASSEMBLY MICROMETER INDEXER CUTTING WHEEL WITH A SECONDARY SAFETY
                                                                                                                    1966 - HARDINGE HC CHUCKER - 9"
                                                                                                                    $RFQ
                                                                                                                    1966 - HARDINGE HC CHUCKER - 9"
                                                                                                                    SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16″ WITH HEXAGON 5C HARDINGE COLLETS: 7/8″ WITH SQUARE 5C HARDINGE COLLETS: 3/4″ WITH STEP CHUCKS
                                                                                                                    • Swing: 9"
                                                                                                                    • Centers: 13"
                                                                                                                      1959 - HARDINGE HC CHUCKER - 9"
                                                                                                                      $RFQ
                                                                                                                      1959 - HARDINGE HC CHUCKER - 9"
                                                                                                                      SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16″ WITH HEXAGON 5C HARDINGE COLLETS: 7/8″ WITH SQUARE 5C HARDINGE COLLETS: 3/4″ WITH STEP CHUCKS
                                                                                                                      • Swing: 9"
                                                                                                                      • Centers: 13"
                                                                                                                        NEW - TENNSMITH HBU48-16 BOX & PAN BRAKE - 48" X 16 GA
                                                                                                                        $RFQ
                                                                                                                        NEW - TENNSMITH HBU48-16 BOX & PAN BRAKE - 48" X 16 GA
                                                                                                                        SPECIFICATIONS CAPACITY, MILD STEEL: 16 GA BENDING LENGTH: 48-1/4″ DEPTH OF BOX (MAX.): 4″ LIFT OF BEAM (MAX.): 1‑1/4″ FRONT TO REAR BEAM ADJUSTMENT: 5/8″ REVERSE BEND (MIN.): 1/4″ FLANGE IN CAPACITY MATERIAL (MIN.): 1″
                                                                                                                        NEW- TENNSMITH HBU48-12 BOX & PAN BRAKE - 48" X 12 GA
                                                                                                                        $RFQ
                                                                                                                        NEW- TENNSMITH HBU48-12 BOX & PAN BRAKE - 48" X 12 GA
                                                                                                                        SPECIFICATIONS CAPACITY, MILD STEEL: 16 GA BENDING LENGTH: 48-1/4″ DEPTH OF BOX (MAX.): 4″ LIFT OF BEAM (MAX.): 1‑1/4″ FRONT TO REAR BEAM ADJUSTMENT: 5/8″ REVERSE BEND (MIN.): 1/4″ FLANGE IN CAPACITY MATERIAL (MIN.): 1″
                                                                                                                        • Bending length: 48.25"
                                                                                                                          CHICK MCML-1550 MULTILOCK TOMBSTONE - 21-3/4" X 12"
                                                                                                                          $RFQ
                                                                                                                          CHICK MCML-1550 MULTILOCK TOMBSTONE - 21-3/4" X 12"
                                                                                                                          SPECIFICATIONS HIGH: 21-3/4″ SQUARE: 12″ EQUIPPED WITH BASE PLATES NOTE: USES MJQ-1550 STANDARD JAWS
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $1,950
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          $RFQ
                                                                                                                          (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                                                                          RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                                                                          TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                                                          $RFQ
                                                                                                                          TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                                                          SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                                                                          TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                                                          $RFQ
                                                                                                                          TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                                                          SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                                                                          TONFOU TF3B-6A5 HYDRAUYLIC POWER CHUCK - 6" 3-JAW
                                                                                                                          $RFQ
                                                                                                                          TONFOU TF3B-6A5 HYDRAUYLIC POWER CHUCK - 6" 3-JAW
                                                                                                                          SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                                                                          Categories:
                                                                                                                          Condition:
                                                                                                                          Manufacturer:
                                                                                                                          Location:
                                                                                                                          Price:
                                                                                                                          •  to 
                                                                                                                          <Prev | 159 | 160 | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | Next>