SPECIFICATIONS

CAPACITY
HORIZONTAL: 18″ STD COLUMN
VERTICAL: 22″ STD COLUMN
VERTICAL @ 45°: 12-1/2″ STD COLUMN
SPEED RANGE (INF. VARIABLE): 50 – 450 FPM
FEED FORCE: 0 – 140 LBS
BLADE DIMENSIONS: 14’6″ L X 1″ W X .035″ THICK
WHEEL DIAMETER: 18″
TEE SLOTS: 4 (TWO SIZES)
WORKING SURFACE: 24.15″ X 33″
TABLE HEIGHT: 34 1/2″ W/O LEVELING SCREWS
MAXIMUM VISE OPENING: 21″
VISE HEIGHT: 6″
MAIN MOTOR: 2 HP, 1800 RPM
COOLANT PUMP MOTOR: 1/4 HP, 3600 RPM
COOLANT CAPACITY: 20 GALLONS

GENERAL
OVERALL DIMENSIONS: 90″ L X 79″ W X 84-1/2″ H
DOMESTIC SHIPPING WEIGHT: 2,870 LBS
ELECTRICS: 230 VOLTS, 3 PH, 60 CYC

STANDARD EQUIPMENT
MARVEL WELDED-EDGE BLADE
MANUALS CONSISTING OF PARTS LIST, OPERATING AND MAINTENANCE MANUAL, INSTALLATION PLAN, WIRING AND ELEMENTARY ELECTRIC DIAGRAMS, INCLUDING ELECTRICAL COMPONENT LIST

FEATURES
FRONT MOUNTED SPEED CONTROL ALLOWS BLADE SPEED TO BE ADJUSTED FROM OPERATOR’S CONTROL STATION.
SPEED RANGE: 50 – 450 FPM (15 – 137 M/MIN) INFINITELY VARIABLE SPEED DRIVE SYSTEM.
FEED RANGE: 0 – 140 LBS. INFINITELY VARIABLE DIRECT READING SCALE BALANCE BEAM.
T-SLOTTED WORK TABLE: WORK AREA 24.25″ X 33″; TABLE HEIGHT 34.5″ FOUR MACHINED T-SLOT ACCEPT .625″ T-BOLTS
MITER CUTTING: COLUMN AND BLADE TILT UP TO 45 DEGREES RIGHT AND LEFT OF VERTICAL; WORK ALWAYS STATIONARY. BUILT-IN PROTRACTOR.
QUICK-ACTION VISE: MAXIMUM OPENING 20″. JAWS CAN BE SHIFTED TO EITHER RIGHT OR LEFT SIDE OF BLADE. JAWS ARE 6″ HIGH, 12″ WIDE.
AUTOMATIC STOPS: ADJUSTABLE STOPS CAN BE PRE-SET TO STOP ADVANCE AND RETURN OF BLADE, AND ALSO TO STOP MOTOR AT ANY LOCATION WITHIN THE 18″ TRAVEL OF THE BLADE.
COOLANT SYSTEM: BUILT-IN AVAILABLE WITH EITHER FLOOD, OR ECO DROP SYSTEM. CONTROLLED BY ON-OFF SELECTOR SWITCH AT OPERATOR’S STATION. TANK CAPACITY 21 GALLONS.
FLUSHING HOSE: WASHES CHIPS FROM HARD TO GET AT PLACES REDUCING CLEAN-UP TIME.
POWER CHIP BRUSH: TOGETHER WITH BLADE WIPERS AND FLOOD COOLANT KEEP BLADE TEETH FREE OF CHIPS.
CARBIDE GUIDE SYSTEM: GUIDES ARE STATIONARY AND CAN BE RADIALLY ADJUSTED TO PRESENT NEW GUIDING SURFACE TO THE BLADE. UPPER AND LOWER GUIDES HAVE PRELOADED CARBIDE FACED BACK-UP BLOCKS TO SUPPORT BACK EDGE OF BLADE.
MOTORS: MAIN: 2 HP, 1800 RPM, TOTALLY ENCLOSED FAN COOLED. COOLANT PUMP: 1/4 HP, 3600 RPM, TOTALLY ENCLOSED MOTOR BUILT-IN INTEGRALLY
CONTROLS: IEC FUSED DISCONNECT SWITCH AND MAGNETIC MOTOR STARTERS, WITH OVERLOAD AND LOW-VOLTAGE PROTECTION. TRANSFORMER PROVIDES LOW VOLTAGE CONTROL (120 VOLTS) TO ALL PUSH BUTTONS AT OPERATOR’S CONTROL PANEL AND MACHINE LIGHTING CIRCUITS. CONTROL APPARATUS MOUNTED IN MOISTURE PROOF NEMA12 COMPARTMENT.

This machine is listed for sale by located in Bethlehem, Pennsylvania