SPECIFICATIONS

CAPACITY
SWING OVER BED: 22″
SWING OVER CROSS SLIDE: 13″
SWING IN GAP: 31-3/8″
GAP WIDTH IN FRONT OF FACE PLATE: 10-5/8″
DISTANCE BETWEEN CENTERS: 90″
WIDTH OF BED: 15-3/4″
MAXIMUM TRAVEL OF COMPOUND: 9-17/32″
MAXIMUM TRAVEL OF CROSS SLIDE: 15-3/4″
HEIGHT OF CENTER FROM LEG BOTTOM: 42″

HEADSTOCK
SPINDLE BORE: 4-1/16″
TAPER OF SPINDLE BORE & CENTER: MT #7 X #5
TYPE OF SPINDLE NOSE: D1-8
NUMBER OF SPINDLE SPEEDS: 12
RANGE OF SPINDLE SPEEDS 4P: 13, 20, 30, 47, 70, 105, 150,
230, 340, 530, 800, 1200 RPM

THREAD & FEED
NUMBER OF FEEDS: 16
RANGE OF LONGITUDINAL FEEDS,
PER REVOLUTION: 0.0012″ – 0.039″
RANGE OF CROSS FEEDS,
PER REVOLUTION: 1/3″ OF LONGITUDINAL FEED
LEAD SCREW DIAMETER AND PITCH: 1-3/4″, 4 TPI
RANGE OF INCH THREADS: 2-72 (44 KINDS)
RANGE OF METRIC PITCHES: 0.2 – 14mm (39 KINDS)

TAILSTOCK
TAILSTOCK QUILL TRAVEL: 7″
TAILSTOCK QUILL DIAMETER: 2-15/16″
TAPER IN TAILSTOCK QUILL: MT #5

MOTORS
SPINDLE DRIVE MOTOR: 10 HP
COOLANT PUMP MOTOR: 1/8 HP

MACHINE DIMENSIONS AND WEIGHT
SPACE REQUIRED: 146″ L X 47″ W X 59″ H
NET WEIGHT (APPROX.): 6,200 LBS

STANDARD EQUIPMENT
MAIN MOTOR: 10 HP, 220/440 VOLT, 3 PHASE, 60 CYC,
SWITCH & WIRING COMPLETE
4-1/16″ SPINDLE BORE
SPINDLE NOSE: D-1-8 CAMLOCK
12 SPINDLE SPEEDS (13 – 1200 RPM)
LONGITUDINAL RAPID TRAVERSE
HEADSTOCK SPINDLE CENTER ADAPTOR, MT #7 X #5
GROUND STEEL CENTER MT #5 FOR HEADSTOCK
CROSS SLIDE SCREW: 8 TPI
LEAD SCREW: 4 TPI
THREAD CHASING DIAL
4-WAY TOOLPOST WITH T-SLOT
HARDENED AND GROUND BEDWAYS AND CROSS SLIDE WAYS
AUTOMATIC LONGITUDINAL FEED STOP BAR
TWO-SPEED DRIVE TAILSTOCK SPINDLE (MT #5)
COOLANT SYSTEM WITH PUMP AND PIPING
PULL DRAWER CHIP (OIL) PAN
12″ BACK PLATE
10″ STEADY REST
FULL LENGTH SPLASH GUARD
HALOGEN WORK LIGHT
TOOL BOX WITH NECESSARY WRENCHES AND SPANNERS
INSTRUCTION MANUAL AND PARTS LIST

This machine is listed for sale by located in Bethlehem, Pennsylvania