buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Lathes & Turning Centers > Miscellaneous - Lathes & Turning Machines > Used

Used Miscellaneous Lathes & Turning Machines For Sale

43 used miscellaneous lathes or turning machine items for sale
1 | 2 | 3
Refine: Viewing 1 - 20 of 43 matches
Sort by:
Items Per Page:  20  |  50 |  100
Victor FHR-68 Lathe
Specifications Swing Over Bed 12.9" Hole thru Spindle 1-1/4" Distance from Face of Turret to Spindle 14" Spindle Speeds 0-4,000RPM Equipped With: DRO 3-Jaw Chuck
Jet Lathe 12 x 40 Sn: 6633
Jet Lathe 12 x 40 Sn: 6633 Specifications: Has removeable gap Aloris type tool post w/8 holders 8 Speed [235-1800] English and metric threading Splash guard Follow rest Steady rest Live and dead center 4 p
Hardinge Model: HLV H   SN: HLV-H-1003
Hardinge Model: HLV H SN: HLV-H-1003 General Specifications: 2-Axis Compound Cross Slide 5 Speed Quick Change Collets Variable Speed Coolant Speed Collet Closer Micros Stops Volts 440, 3 Phase, 1 Hp Cycl
Hardinge TFB-H Lathe SN: HLV-H-1968
Hardinge TFB-H Lathe SN: HLV-H-1968 Specifications: Volt: 440 or 220 3-phase HP: 1.5 Equipped With Acu -Rite II, 2 axis DRO Coolant pneumatic brake Work Lamp Collets and collet holder Conditi
Hardinge Model: HLV,   SN: HLV-H-177
Hardinge Model: HLV, SN: HLV-H-177 General Specifications: Volts 208, 3 Phase, 1 Hp Cycle 60 With: Collets Hardinge 5” 3-jaw chuck with wrench Condition: Good. PRICE: F.O.B. Rochester “as-i
Hardinge Model: HLV,   SN: HLV-H-177
Hardinge Model: HLV, SN: HLV-H-177 General Specifications: Volts 208, 3 Phase, 1 Hp Cycle 60 With: Collets Hardinge 5” 3-jaw chuck with wrench Condition: Good. PRICE: F.O.B. Rochester “as-i
Hardinge Model: DSM 59   SN: DSM59-4966-3
Hardinge Model: DSM 59 SN: DSM59-4966-3 General Specifications: 2-Axis Compound Cross Slide quick change collet closer Set of collets 5” 3-jaw chuck Variable speed Coolant 1 Hp, 220 3-phase With: 5”
Jewelers Lathe
Jewelers Lathe General Specifications: Equipped With: 3 tail stocks 23 Collets 120 volt motor Extra drawbars Compound cross slide with tool holder 2 drive belts Condition: Good PRICE: F.
Maxturn| 14" Swing | 30" Between center |
14" Swing 1.5" Spindle bore 30" Between center Thread mm y std Tailstock spindle taper MT3 220v / 3 Phases Dimensions 36" x 76" x 56" Full length foot brake
Victor 1640| 16" Swing | 40" Between center |
16" Swing 2" Spindle bore 40" Between center Threads mm y std Tailstock spindle taper MT4 220v / 3 Phases Dimensions 35" x 50" x 57"
Harrison | 3" Spindle bore | 80"  Between centers |
18" Swing 28" Swing in Gap 3" Spindle bore 80" Between centers Std & mm Thread Tapered thread Tailstock spindle taper MT5 220v / 3 Phases Weight: 5,670 lbs Dimensions 43" x 143"
Christeen | Swing 22" | Dimensions 39" x 150" x 54" |
Swing 22" Spindle bore 2" Between centers 102" Std thread Tailstock spindle taper MT4 440v / 3 Phases Dimensions 39" x 150" x 54"
OSBORN| 3 Jaw Chuck | Dimensions 30" x 46" x 38" |
3 Jaw Chuck Manual X, Y movement Hydraulic Z movement 440v / 3 Phases Dimensions 30" x 46" x 38"
Christeen | 1 HP | Dimensions 22" x 38" x 50" |
Swing 24" Spindle bore 2-1/2" between centers 13' Thread std y mm Tapered thread 440v / 3 Phases
Okuma Impact LU15-M Turning Center - 1998 - Excellent Condition
Okuma Impact LU15-M Turning Center Year: 1998 Model: LU15-M Serial No.: Available Upon Serious Inquiry Electrics: 220-440 Volt / 3 Phase / 60 Cycle / 100 Amps (largest motor rating) Swing Over Bed: 20.87" / Swi
Meuser & Co. | 9010 | Swing18"|
Swing18" Swing in gap 26" Spindle bore 1-1/2" Between centers 80" Thread Std y mm Tapered thread Tailstock spindle taper MT3 2230v / 3 Phases Dimensions 40" x 140" x 58"
Russelle| 32" Swing| Spindle bore 8" |
32" Swing 8" Spindle bore 13' Between centers Thread DP, Module, Metric, TPI (FPP) Tapered thread Tailstock spindle taper #5 220v / 3 Phases Dimensions 67" x 242" x 69"
Victor 1640B | 16" Swing | 40" Beetwen centers  |
16" Swing 2" Spindel bore 40" Beetwen centers Thread mm y std Thapered thread Tailstock spindle taper MT4 220v / 3 Phases Dimensions 42" x 84" x 56" Work light Coolant system Full
Lathe – Turret Ram Type, Warner & Swasey – 2” Bar Capacity x 18” Swing
Warner & Swasey Turret Lathe, Ram Type, Universal Purchase Date by Current Owner: 2002 Machine History: Went to a major machine rebuilding shop in the Northwest directly upon purchase for a complete overhaul. After
Hardinge  DV-59, SN: DV-59-11587
Hardinge DV-59, SN: DV-59-11587 Specifications: Variable speed XY tool compound Tailstock Equipped With: 52 5C collets 5 face plates 5” 3-jaw chuck 5” 4-jaw chuck 7 oversized collets Preci
Categories:
  • X machine tools (43)
  • X Lathes & Turning Centers (43)
  • X Miscellaneous - Lathes & Turning Machines (43)
Condition:
  • X Used (43)
Price:
  •  to 
1 | 2 | 3