buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Lathes & Turning Centers > Miscellaneous - Lathes & Turning Machines

Miscellaneous Lathes & Turning Machines For Sale

41 new & used miscellaneous lathes or turning machine items for sale
1 | 2 | 3
Refine: Viewing 1 - 20 of 41 matches
Sort by:
Items Per Page:  20  |  50 |  100
DOOSAN PUMA 4100LM , FANUC I CNTRL, 18" CHK NEW: 2018
$RFQ
DOOSAN PUMA 4100LM , FANUC I CNTRL, 18" CHK NEW: 2018
SPECIFICATIONS: TRAVELS: X-AXIS TRAVEL: 13.8" Z-AXIS TRAVEL: 84.8" CHUCK SIZE: 18" MAXIMUM SWING OVER BED: 31" MAXIMUM TURNING DIAMETER: 21.7" MAXIMUM TURNING LENGTH: 82.4" (Long Bed
KNUTH BASIC 180 SUPER - V ENGINE LATHE
$RFQ
KNUTH BASIC 180 SUPER - V ENGINE LATHE
  Basic 180 SuperBasic 180 V Working AreaCenter width39.37 inTurning diameter over bed14 inTurning-¯ over support9 inTurning diameter over gap bridge20 inGap bridge length8 inBed width8 i
13" x 40" KNUTH BASIC 170 ENGINE LATHE
$RFQ
13" x 40" KNUTH BASIC 170 ENGINE LATHE
Working AreaCenter width39.37 inTurning diameter over bed13 inTurning-¯ over support8 inTurning diameter over gap bridge19 inGap bridge length8 inBed width7 inTravelsTravel X-axis6.7 inTravel Z1-axis4 inSwing range
12" x 30" KNUTH "BASIC PLUS" ENGINE LATHE
$RFQ
12" x 30" KNUTH "BASIC PLUS" ENGINE LATHE
Working AreaCenter width31.89 inTurning diameter over bed12 inTurning-¯ over support7 inTurning diameter over gap bridge17 inBed width7 inTravelsTravel X-axis6.1 inTravel Z1-axis4 inSwing range of top slide± 60¡ Hea
Jet Lathe 12 x 40 Sn: 6633
$4,200
Jet Lathe 12 x 40 Sn: 6633
Jet Lathe 12 x 40 Sn: 6633 Specifications: Has removeable gap Aloris type tool post w/8 holders 8 Speed [235-1800] English and metric threading Splash guard Follow rest Steady rest Live and dead center 4 p
Hardinge Model: HLV H SN: HLV-H-1003
$12,500
Hardinge Model: HLV H SN: HLV-H-1003
Hardinge Model: HLV H SN: HLV-H-1003 General Specifications: 2-Axis Compound Cross Slide 5 Speed Quick Change Collets Variable Speed Coolant Speed Collet Closer Micros Stops Volts 440, 3 Phase, 1 Hp Cycl
Hardinge TFB-H Lathe SN: HLV-H-1968
$6,750
Hardinge TFB-H Lathe SN: HLV-H-1968
Hardinge TFB-H Lathe SN: HLV-H-1968 Specifications: Volt: 440 or 220 3-phase HP: 1.5 Equipped With Acu -Rite II, 2 axis DRO Coolant pneumatic brake Work Lamp Collets and collet holder Conditi
Hardinge Model: HLV, SN: HLV-H-177
$12,500
Hardinge Model: HLV, SN: HLV-H-177
Hardinge Model: HLV, SN: HLV-H-177 General Specifications: Volts 208, 3 Phase, 1 Hp Cycle 60 With: Collets Hardinge 5” 3-jaw chuck with wrench Condition: Good. PRICE: F.O.B. Rochester “as-i
Hardinge Model: DSM 59 SN: DSM59-4966-3
$6,750
Hardinge Model: DSM 59 SN: DSM59-4966-3
Hardinge Model: DSM 59 SN: DSM59-4966-3 General Specifications: 2-Axis Compound Cross Slide quick change collet closer Set of collets 5” 3-jaw chuck Variable speed Coolant 1 Hp, 220 3-phase With: 5”
Jewelers Lathe
$1,250
Jewelers Lathe
Jewelers Lathe General Specifications: Equipped With: 3 tail stocks 23 Collets 120 volt motor Extra drawbars Compound cross slide with tool holder 2 drive belts Condition: Good PRICE: F.
OSBORN| 3 Jaw Chuck | Dimensions 30" x 46" x 38" |
$RFQ
OSBORN| 3 Jaw Chuck | Dimensions 30" x 46" x 38" |
3 Jaw Chuck Manual X, Y movement Hydraulic Z movement 440v / 3 Phases Dimensions 30" x 46" x 38"
Christeen | 1 HP | Dimensions 22" x 38" x 50" |
$RFQ
Christeen | 1 HP | Dimensions 22" x 38" x 50" |
Swing 24" Spindle bore 2-1/2" between centers 13' Thread std y mm Tapered thread 440v / 3 Phases
Russelle| 32" Swing| Spindle bore 8" |
$RFQ
Russelle| 32" Swing| Spindle bore 8" |
32" Swing 8" Spindle bore 13' Between centers Thread DP, Module, Metric, TPI (FPP) Tapered thread Tailstock spindle taper #5 220v / 3 Phases Dimensions 67" x 242" x 69"
Hardinge DV-59, SN: DV-59-11587
$6,400
Hardinge DV-59, SN: DV-59-11587
Hardinge DV-59, SN: DV-59-11587 Specifications: Variable speed XY tool compound Tailstock Equipped With: 52 5C collets 5 face plates 5” 3-jaw chuck 5” 4-jaw chuck 7 oversized collets Preci
Doosan Lynx 220 CNC Lathe
$50,000
Doosan Lynx 220 CNC Lathe
Doosan Lynx 220 CNC Lathe with Fanuc controls. Comes with tail stock and chip conveyor. Does not come with tooling and transporting of machine is buyers responsibility. Bought new 14 months ago, only has about 40 hours
Hardinge DV-59 SN: DV-59-12697
$6,400
Hardinge DV-59 SN: DV-59-12697
Hardinge DV-59 SN: DV-59-12697 Specifications: Rapid Cross feed Tool Turret Coolant Belt Change Equipped With: Complete set of pulleys Condition: Good Price: F.O.B. Rochester, NY
Hardinge TFB-H Lathe SN: HLV-H-1168
$6,750
Hardinge TFB-H Lathe SN: HLV-H-1168
Hardinge TFB-H Lathe SN: HLV-H-1168 Specifications: Volt: 440 or 220 3-phase HP: 1.5 Equipped With Acu -Rite II, 2 axis DRO Coolant pneumatic brake Work Lamp Collets and collet holder Conditi
Fortune V-Turn 26
$RFQ
Fortune V-Turn 26
GENERAL SPECIFICATIONS FORTUNE V-TURN 26 CNC TURNING CENTER 12'' 3-JAW CHUCK 24'' SWING 24'' BETWEEN CENTERS 3.4'' BORE SPINDLE SPEEDS TO 3500 RPM 20 HP 12 STATION TURRET PROGR
Fortune V-Turn 46
$RFQ
Fortune V-Turn 46
GENERAL SPECIFICATIONS FORTUNE V-TURN 46 CNC TURNING CENTER 15'' 3-JAW CHUCK 69'' BETWEEN CENTERS 4.8'' BORE 28.7'' SWING SPINDLE SPEEDS TO 1500 RPM 40 HP 10 POSITION TURRET TA
Hendey Machine Co. Lathe 10" x 28" Taper Attachment Cullman Wheel
$975
Hendey Machine Co. Lathe 10" x 28" Taper Attachment Cullman Wheel
This is for a vintage belt driven Lathe that my dad had used in his shop prior to his passing. Item description as I know it as follows: Hendey Machine Company Torrington Ct USA Also has a tag as pictured that say
Categories:
  • X machine tools (41)
  • X Lathes & Turning Centers (41)
  • X Miscellaneous - Lathes & Turning Machines (41)
Condition:
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3