Drills & Tapping Machinery for sale, New & Used

2 SPDL, No. 869, ROCKWELL/DELTA,**Was machine 1947**

$RFQ

EQUIPPED WITH: Jacobs Chuck 230/460/3 Phase 60 Cycle SPECIFICATIONS: Throat: 8" Bottom of Spindle to Table: 24" Table Size: 24" x 65" Distance Between Spindles: 36" Spindle Trav

Warren, MI
View Listing

24", SOLBERGA No. SE7, geared head, 1.5/1.2 HP, #3MT, auto. feed

$RFQ

SPECIFICATIONS: Drilling capacity--mild steel 1" --cast iron 1-1/4" Column diameter 4-5/16" Center of spindle to column 12"

Hialeah, FL
View Listing

15", ROCKWELL, Model 65-000, belt, 1/2" capacity, 1/2 HP

$RFQ

SPECIFICATIONS: Drilling capacity--cast iron 1/2" Center of spindle to column 7-1/2" Spindle speeds--number 5 --range 400 to 5400 rp

Hialeah, FL
View Listing

36" x 9" IKEDA MODEL RMS-9 RADIAL ARM DRILL PRESS

$RFQ

IKEDA MODEL RMS-9 36" X 9" RADIAL ARM DRILL PRESS MANUFACTURED 1985 RACO Stock Number R017185 MAX. DISTANCE, COLUMN TO SPINDLE CENTER ------ 36" MIN. DISTANCE, COLUMN TO SPINDLE CENTER ------ 12&qu

Arm length: 3'
Column diameter: 9"

Des Plaines, IL
View Listing

Saber RF19VTM Milling Machine

$RFQ

• Variable-speed 0-2000rpm • Tapping w/ forward & reverse • LED read-out of spindle RPM • High torque at all speeds • Massive diameter quill provides high rigidity • Positive depth stop for quick and easy adjust

Maximum diameter hole tapped: 0.625"

Spokane Valley, WA
View Listing

Rockwell/Delta Drill, Model: 15-655, SN: 1654715

$1,500

Volt 460 HP ¾ PH 3 RPM 1725 Speeds 8 (450-4700) Swing 15”

Rochester, NY
View Listing

Fosdick 5” X 13” Radar Arm Drill

$3,850

L Base w/ 2 Box Table Spindle 20 – 1406 36 RPM Speeds

Rochester, NY
View Listing

Powermatic Drill Model 1200

$1,800

General Specifications: Drill speed 300-1800 Condition: Good Price: F.O.B.Rochester “as-inspected” $ 1,800

Rochester, NY
View Listing

Johansson Radial Arm Drill

$5,800

Specification: T- Slot Volt 440 HP

Rochester, NY
View Listing

American Hole Wizard, Radar Arm Drill

$4,200

General Specifications: 9” x 4 Ft Spindle speed 12 speeds (50 1500) Down feed 6 speeds (.007 - .018”) per revolution

Rochester, NY
View Listing

BIRMINGHAM Radial Arm Drill Press

$RFQ

TPR-720 TPR-820 TPR-920 TPR-1100 TPR-1230 Column Diameter 8.25" [210mm] 8.25" [210mm] 8.25" [210mm] 10.25" [260mm] 11.81" [300mm] Column to spindle-max

Chicago, IL
View Listing

JET Radial Arm Drill Press

$RFQ

The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads The spindle is made of the finest case hardene

Chicago, IL
View Listing

Rong Fu RF-45 Geared Head Drill-Mill

$RFQ

• Extra heavy duty square column design • Head tilts 90° left and 45° right • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8

Chicago, IL
View Listing

Rong Fu RF-40 Geared Head Drill-Mill

$RFQ

• Head tilts 90° left and 45° right and swivels • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1

Chicago, IL
View Listing

Rong Fu RF-35 Radial Drill

$RFQ

• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 340, 660, 1060, 1665, 3000 rpm • Spindle Taper : MT3 • Spindle travel: 5" • Spindle horizontal travel: 14.87" • Spinde to t

Chicago, IL
View Listing

Rong Fu RF-31 Mill-Drill

$RFQ

• Motor: 2HP, 1 phase 110 volt or 220 volt or 3 phase 220 volt • Spindle Speeds: (12) 120 to 2500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 5-1/2" • Working Table: 8.25&q

Chicago, IL
View Listing

JET model J-A2608M-PF2 20" Geared Head Drill Press with Powerfeed

$RFQ

• Motor 1 & 1.5 HP, 220 Volts, 3 phase • Spindle speeds(8) (RPM) Low-130, 260, 420, 840; High-535, 1070, 1745, 3480 • Spindle Taper MT-3 • Quill Diameter (in.) 2-3/8 • Max Distance Spindle to Table ( in.) 35-5/8

Chicago, IL
View Listing

JET model J-2360 20" Geared Head Drilling & Tapping Press with pow

$RFQ

• Motor 4 HP, 230/460V, 3 phase, Prewired 230V. • Spindle speeds(9)(RPM) 55, 98, 156, 198, 346, 456, 576, 822, 1338 • Spindle Taper MT-4 • Quill Diameter (in.) 3.465 • Max Distance Spindle to Table ( in.) 30-1/2 • T

Chicago, IL
View Listing

JET model GHD-20PFT 20" Geared Head Drill Press with power downfeed

$RFQ

• Motor 2HP, 230V, 3 phase, 2-speed • Spindle speeds(12) (RPM) 120, 260, 460, 900, 1600, 3000, 60, 130, 230, 450, 800, 1500 • Spindle Taper MT-3 • Quill Diameter (in.) 3 • Max Distance Spindle to Table ( in.) 30-1/2

Chicago, IL
View Listing

JET model GHD-20T 20" Geared Head Drill Press

$RFQ

• Motor 2HP, 230V, 3 phase, 2-speed • Spindle speeds(12): (RPM) 120, 260, 460, 900, 1600, 3000, 60, 130, 230, 450, 800, 1500 • Spindle Taper MT-3 • Quill Diameter (in.) 3 • Max Distance Spindle to Table ( in.) 30-1/2

Chicago, IL
View Listing

JET 2232/2234AC 20" Electronic Variable Speed Drill Press

$RFQ

• Variable spindle speeds from 65 to 2000 RPM. Great for Tapping. • High torque at all speeds both forward and reverse for tapping. • Latest AC inverter variable speed technology. • Continuous speed adjustment while i

Chicago, IL
View Listing

JET 2221/2223VS 20" Variable Speed Heavy Duty Drill Press

$RFQ

• Variable spindle speeds from 300 to 2000 RPM . • 6" spindle/quill travel ? External #3 Morse Taper. • Front mounted positive control depth stop. • Massive 3" quill diameter. • Heavy duty cast iron design.

Chicago, IL
View Listing

JET A5816/A5818 15" Variable Speed Drill Press

$RFQ

• Available as floor model or bench style • Speeds from 400 to 5,000 RPM • Handwheel adjustment sets the speeds • Large 2-1/4" quill allows greater accuracy • Full bearing support on quill for maximum spindle st

Chicago, IL
View Listing

JET 2500/2550 15" & 20" Step Pulley Drill Presses

$RFQ

• Cast iron head with spindle that four heavy duty sealed ball bearings. • Large T-slotted production work table. • 3-3/8" stroke for deep hole applications. • Accurate depth stop for precise hole depths. • 5/8&

Chicago, IL
View Listing

4' X 13" Used Giddings & Lewis Bickford Radial Drill

$RFQ

Arm Size 4' Column Diameter 13" Spindle Speeds 15 To 1,500 Rpm's Maximum Height Under Arm 60" Spindle Taper #5 Morse Spindle Travel 18" Spindle Diameter 4" Spindle Feeds .004 To .020 IP

Arm length: 4'
Column diameter: 13"

Navasota, TX
View Listing

4' X 9" Cincinnati Gilbert Double Base Radial Arm Drill

$RFQ

Arm Length 4' Head Traverse On Arm 38-3/4" Column Diameter 9" Column To Spindle Center Max. 48" Column To Spindle Center Min. 9-1/4" Capacity In Cast Iron 1-3/4" Capacity In Mild Steel

Arm length: 4'
Column diameter: 9"

Navasota, TX
View Listing

3' X 12" Used Yoshida Radial Drill

$RFQ

Arm Size 3' Column Diameter 12" Maximum Height Under Arm 48" Spindle Speeds 40 To 1,800 Rpm's Spindle Taper # 4 Morse Spindle Travel 16" Spindle Diameter 3-1/4" Spindle Feeds .0002 To.0

Arm length: 3'
Column diameter: 12"

Navasota, TX
View Listing

24" Used Babin Circl-Matic Automatic Bolt Circle Drill

$RFQ

Standard Bolt Circle Range 4 To 24 Standard Division Of Equal Spaced Holes 4 To 24 Max. Diameter Of Work Piece ( Swing ) 33" Center Line Of Chuck To Front Of Base 17" Drilling Capacity In Carbon Steel 2-1/8

Bolt circle diameter: 24"

Navasota, TX
View Listing

20" POWERMATIC #1200 FLOOR TYPE SINGLE SPINDLE DRILL PRESS ( POWER DOW

$RFQ

20" POWERMATIC #1200 FLOOR TYPE SINGLE SPINDLE DRILL PRESS ( POWER DOWN FEED ) MANUFACTURED 1993 RACO Stock Number R017118 MAXIMUM SWING -------------------------------- 20" MAXIMUM DRILLING CAPACITY -

Swing: 20"
Motor: 1.5HP

Des Plaines, IL
View Listing

18" BUFFALO #18 SINGLE SPINDLE DRILL PRESS

$RFQ

Des Plaines, IL
View Listing

15" POWERMATIC VARIABLE SPEED SINGLE SPINDLE DRILL MODEL 1150A

$RFQ

15" POWERMATIC VARIABLE SPEED SINGLE SPINDLE DRILL MODEL 1150A RACO Stock Number R016778 SWING -------------------------------------- 15" THROAT DEPTH ------------------------------ 7-1/2" TAPER ---

Swing: 15"
Motor: 1HP

Des Plaines, IL
View Listing

15" CLAUSING MODEL 16VC SINGLE SPINDLE DRILL

$RFQ

15" CLAUSING MODEL 16VC SINGLE SPINDLE DRILL RACO Stock Number R014306 DRILL TO CENTER OF CIRCLE ---------------- 15" DIA. CAPACITY, HAND FEED ---------------------- 5/8" DIA. SPINDLE SPEEDS -----

Swing: 15"
Motor: 1HP

Des Plaines, IL
View Listing

12" ASTRO MODEL 921F FLOOR TYPE SINGLE SPINDLE DRILL PRESS

$RFQ

Des Plaines, IL
View Listing

17" DELTA SINGLE SPINDLE DRILL PRESS

$RFQ

17" DELTA SINGLE SPINDLE DRILL PRESS RACO Stock Number R014149 THROAT DEPTH ------------------------------ 8-1/2" MAXIMUM SPINDLE TRAVEL --- ( MANUAL ) --- 5" VEE PULLEY DRIVE ---------------------

Swing: 17"

Des Plaines, IL
View Listing

LELAND GIFFORD #3SC HORIZONTAL DRILL UNIT

$RFQ

LELAND GIFFORD #3SC HORIZONTAL DRILL UNIT RACO Stock Number R015828 DRILLING CAPACITY IN STEEL ---------------- 3/4" TAPER -------------------------------------- #4 MORSE MAXIMUM OUTFEED OF SPINDLE ---------

Diameter: 0.75"

Des Plaines, IL
View Listing

LELAND GIFFORD #3SC HORIZONTAL DRILL UNIT

$RFQ

LELAND GIFFORD #3SC HORIZONTAL DRILL UNIT RACO Stock Number R015826 DRILLING CAPACITY IN STEEL ---------------- 3/4" TAPER -------------------------------------- #4 MORSE MAXIMUM OUTFEED OF SPINDLE ---------

Diameter: 0.75"

Des Plaines, IL
View Listing

#TC311 BROTHER CNC DRILL & TAP CENTER

$RFQ

#TC311 BROTHER CNC DRILL & TAP CENTER S/N 111216 NEW 1993 TABLE SIZE -------------------------------------------- 15.7" X 8.6" TURRET STATIONS ------------------------------------ 10 X AXIS TRAVEL (

X axis travel: 11.8"

Des Plaines, IL
View Listing

63" Arm 17" Column Victor 1763H RADIAL DRILL, Spindle Stroke 14-9/16", 12 s

$RFQ

NEW VICTOR 17" x 63" RADIAL DRILL MODEL: 1763H SPECIFICATIONS Dimensions: Diameter of column: 17" Maximum distance (col./spl): 63" Minimum distance (col./spl)): 13

Arm length: 63'
Column diameter: 17"

Harrison, NJ
View Listing

63" Arm 12" Column Victor 1363H RADIAL DRILL, Spindle Stroke 10.63", 12 spe

$RFQ

NEW VICTOR 13" x 63" RADIAL DRILL MODEL: 1363 SPECIFICATIONS Dimensions: Diameter of column: 12.6" Maximum distance (col./spl): 63" Minimum distance (col./spl)): 1

Arm length: 63'
Column diameter: 12.6"

Harrison, NJ
View Listing

49" Arm 11" Column Victor 1249H RADIAL DRILL, Spindle Stroke 10.63", 12 spe

$RFQ

NEW VICTOR 12" x 49" RADIAL DRILL MODEL: 1249H SPECIFICATIONS Dimensions: Diameter of column: 11.81" Maximum distance (col./spl): 49.21" Minimum distance (col./spl)): &n

Arm length: 49.21'
Column diameter: 11.81"

Harrison, NJ
View Listing

10" Arm 43" Column Victor 1043 RADIAL DRILL, Spindle Stroke 9", 12 speeds,

$RFQ

NEW VICTOR 10" x 43" RADIAL DRILL MODEL: 1043 SPECIFICATIONS Dimensions: Diameter of column: 10.25" Maximum distance (col./spl): 43.31" Minimum distance (col./spl)): &nb

Arm length: 10.25'
Column diameter: 43.31"

Harrison, NJ
View Listing

48" Arm 11" Column Victor 1148 RADIAL DRILL, Spindle Stroke 9-7/8", 12 spee

$RFQ

NEW VICTOR 11" x 48" RADIAL DRILL MODEL: 1148 SPECIFICATIONS Dimensions: Diameter of column: 11.2" Maximum distance (col./spl): 48.5" Minimum distance (col./spl)):

Arm length: 48.5'
Column diameter: 11.2"

Harrison, NJ
View Listing

37" Arm 8" Column Victor 837 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,

$RFQ

NEW VICTOR 8" x 37" RADIAL DRILL MODEL: 837 SPECIFICATIONS Dimensions: Diameter of column: 8.25" Maximum distance (col./spl): 37.41" Minimum distance (col./spl)):

Arm length: 37.41'
Column diameter: 8.25"

Harrison, NJ
View Listing

33" Arm 8" Column Victor 833 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,

$RFQ

NEW VICTOR 8" x 33" RADIAL DRILL MODEL: 833 SPECIFICATIONS Dimensions: Diameter of column: 8.25" Maximum distance (col./spl): 33.5" Minimum distance (col./spl)): 8

Arm length: 33.5'
Column diameter: 8.25"

Harrison, NJ
View Listing

29" Arm 8" Column Victor 829 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,

$RFQ

NEW VICTOR 8" x 29" RADIAL DRILL MODEL: 829 SPECIFICATIONS Dimensions: Diameter of column: 8.25" Maximum distance (col./spl): 29.5" Minimum distance (col./spl)): 8

Arm length: 29.5'
Column diameter: 8.25"

Harrison, NJ
View Listing

5' X 15" BERGONZI MODEL #TM1600 RADIAL DRILL: STOCK #51281

$RFQ

SERIAL .............................. 108 MODEL ............................... TM50-1600 NEW ................................. 1970 AREA OF BASE ........................ 66" X 33" SPINDLE SPEEDS ............

Holland, OH
View Listing

78" Arm 17" Column Clausing CL2000H RADIAL DRILL

$RFQ

NEW CLAUSING RADIAL DRILL 78" ARM, 39 x 31 x 19 TABLE, 7.5 HP MODEL: CL2000H SPECIFICATIONS: WORKING AREA: Column Sleeve Dia.: 17"

Arm length: 78'
Column diameter: 17"

Harrison, NJ
View Listing

49" Arm 11" Column Clausing CLC1250H RADIAL DRILL

$RFQ

NEW CLAUSING RADIAL DRILL 49" Arm, 25 x 20 x 16 Table, 2 3/8" Cap, 5.0 hp MODEL: CLC1250H Clausing Radial Drill Features and Standard Equipment: Equipped with independent clamping unit. &n

Arm length: 49.2'
Column diameter: 11.81"

Harrison, NJ
View Listing

48" Arm 11" Column Clausing CL1230H RADIAL DRILL

$RFQ