Machine Tools > Drills & Tapping Machinery > Gun Drills

Gun Drills For Sale

 
 

46 new & used gun drill items for sale

1 | 2 | 3
Refine: Viewing 1 - 20 of 46 matches Sort by: Items Per Page:  20  |  50 |  100
Categories:
  • X machine tools (46)
  • X Drills & Tapping Machinery (46)
  • X Gun Drills (46)
Condition:
Price:
  •  to 
1" x 48" Eldorado M-75-1041 Precision Deep Hole Gun Drill
Mounted on Richard Horizontal Boring Mill S/N: 885 New: 1981 EQUIPPED WITH: Motor Driven With 1.5 HP, 3 Phase, 60 Cycle 208/230/460 Volt Spindle Drive. 1145 RPM. 7.5 HP 3 Phase 60 Cycle Coolant System. Complet
  • Maximum hole diameter: 1"

    lincolnwood, IL
    View Listing
    3/4" x 30" Eldorado/Mega Model M-75-1041 Precision Deep Hole Gun
    S/N: 1179 New: 1985 EQUIPPED WITH: Motor Driven With 3 HP, 3 Phase, 60 Cycle, 230 Volt Spindle Drive. 7.5 HP, 3 Phase, 60 Cycle Coolant System. Complete Electrical Controls. 1 HP DC Servo Feed Motor. Ball Scr
    • Maximum hole diameter: 0.75"

      lincolnwood, IL
      View Listing
      ELDORADO MEGA M50 2-SPINDLE GUN DRILL,UNISIG UNE-2i PLC CTRL, .078” - .5&qu
      SPECIFICATIONS DRILL CAPACITY: .078" – .5" DIAMETER SPINDLE STROKE: 13" SPINDLE MOTORS: 2 HP SPINDLE SPEEDS (VS): 10,000 RPM GENERAL MACHINE DIMENSIONS: 4’7” LR X 6’ FB X 5’ H
      • # Spindles: #2
      • Maximum hole diameter: 0.5"

        Bethlehem, PA
        View Listing
        Technidrill 100-.375-60-3A 3-Axis CNC Gun Drilling Machine
        Reference #27420 Technidrill 100-.375-60-3A 3-Axis CNC Gun Drilling Machine Age 1998 Model: 100-.375-60-3A CAPACITY: Maximum Drilling Diameter ............. 1-3/8" Maximum Length ........................
        • Maximum hole diameter: 1.375"

          Melville, NY
          View Listing
          2"x36" Stroke, TechniDrill BTA, Dual 30HP Spdls. Counter Rot. Hi-Press Clt. 1994
          Serial No. 7069-7/94 New - 1995 The BTA System, also known as the STS, (Single Tube System) is capable of very high penetration rates, as much as five to seven times that of gun drilling. It also provides surface f

          Lincolnshire, IL
          View Listing
          1/2"x30",Unisig Entrust,M-1146,6-Spdl. Counter Rotate,Whip Guide,Walkn Beam.'06
          Serial No. M1146/1720 New - 2006 SPECIFICATIONS: Drilling Diameter - Maximum...............................................1/2" Length Of Stroke - Maximum.................................................30

          Lincolnshire, IL
          View Listing
          TBT Tiefbohrtechnik Two Headed Gun Drill ML 200-2-800
          TBT Tiefbohrtechnik Two Headed Gun Drill ML 200-2-800 SPECIFICATIONS: Number of Spindles 2 Drilling Slide Stroke 800
          • # Spindles: #2

            Sanford, FL
            View Listing
            Precihole GVN06M2-300 Dual Spindle Micro Gun Drill (2014)
            Precihole GVN06M-2-300 Dual Spindle Micro Gun Drill (2014) SPECIFICATIONS for Precihole GVN06M-2-300 Operation: Gun Drilling Mode of Operation:Tool Rotating & feeding with component counter rotation Gun Drill
            • # Spindles: #2

              Sanford, FL
              View Listing
              2006 ELDORADO MODEL MEGA M50 2-SPINDLE GUN DRILL WITH UNISIG PLC CONTROL
              SPECIFICATIONS DRILL CAPACITY: .078" – .5" DIAMETER SPINDLE STROKE: 13" SPINDLE MOTORS: 2 HP SPINDLE SPEEDS (VS): 10,000 RPM GENERAL MACHINE DIMENSIONS: 4’7” LR X 6’ FB X 5’ H
              • # Spindles: #2
              • Maximum hole diameter: 0.5"

                Bethlehem, PA
                View Listing
                Tarus CNC Gun Drill (1996)
                GENERAL SPECIFICATIONS TRAVELS; X AXIS (TABLE): 154” Y AXIS (SPINDLE HEAD):60” Z AXIS (DRILL UNIT):84” W AXIS (COLUMN INFEED):30” TABLE: 100” X 154” X 60 TONS DRILLING SPINDLE MAX DIAMETER GUN DRILL: 2” MILLING/S

                Orion Township, MI
                View Listing
                Gildemeister-Heinrich BTA Drill
                Reference #26303 Gildemeister-Heinrich BTA Drill Model: B3P2 x 2500 Max Swing ............................ 13" Maximum Bore Diameter ................ 1" Maximum Bore Length .................. 98.4
                • Maximum hole diameter: 1"

                  Melville, NY
                  View Listing
                  Sandvick Deep Hole Drilling Attachment For Horizontal Boring Mill
                  Reference #26968 Sandvick Deep Hole Drilling Attachment For Horizontal Boring Mill Model: Varilock Ejector Drill with High Pressure Coolant System Type: 424.2-402 Rotating Connector FEATURES: #50 Taper A

                  Melville, NY
                  View Listing
                  Eldorado M75 1041 Gun Drill
                  Drilling Diameter: Maximum .75" Drilling Diameter: Minimum .0550" Maximum Drilling Depth 30" Spindle Speeds 1140-11,500 RPM Feed Rate: Drilling .1-99.9 IPM Feed Rate: Rapid 200 IPM Work Table 2
                  • Maximum hole diameter: 30"

                    Sanford, FL
                    View Listing
                    Dadson CNC Gundrill, DS-7518.CM 1996 Used CNC Gundrilling Machine
                    SPECIFICATIONS Make: Dadson Model: DS7518.CM Serial Number: 093099 Year: 1996 Max Drilling Diameter: 0.5" Max Drill Stroke: 18" T Slotted Fixture Area: 18" x 29" Spindle Speeds: 400 - 4000 R
                    • # Spindles: #1
                    • Maximum hole diameter: 0.5"

                      Sanford, FL
                      View Listing
                      1" x 32" Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,92
                      New - 1992 CAPACITY: Spindles - Number..............................................2 Capacity - Drilling............................0.156-1.00 inches Stroke - Spindle (Z Axis)............................32.0 inche

                      Lincolnshire, IL
                      View Listing
                      3/4"x30",Eldorado M75-1041,F-18 Hi-Pres.Clnt.,Chip Conv.,Enclosed Work Area,1996
                      New - 1996 Serial No. 1500 MACHINE SPECIFICATIONS: Gundrilling Diameter Capacity - Mild Steel.......................0.055" - .75" Ball Screw Stroke Length..................................................

                      Lincolnshire, IL
                      View Listing
                      .031- .375 x 10" TECHNIDRILL 4 Spindle Gun Drill, Model .250-4-1A-10,
                      Fanuc Panelmate PLC Ctrl, 10" Travel Ballscrew Driven Variable Speed Infeed, Aprox Part Size Cap 14" H x 10" L, High Pressure Coolant w/ Mag Sep & Convey, 2000,

                      Cincinnati, OH
                      View Listing
                      TBT BW250 CNC Deep Hole Drilling and Milling Center
                      Reference #26181 TBT BW250 CNC Deep Hole Drilling and Milling Center Age: 1999 Model: BW250 FEATURES: Gun Drilling, Milling, Threading Siemens 840D CNC Controls Pallet Shuttle System CAPACITY: Maximum D
                      • Maximum hole diameter: 1.37"

                        Melville, NY
                        View Listing
                        3/4"x48"Str.,Eldorado M75-1076,Counter Rotate,F-18 Hi-Pres.clnt.Updated Elec,'82
                        New - 1984 Serial No. 1010 SPECIFICATIONS: Capacity with 48" Stroke.........................................3/4" Diameter Gun Drilling Diameter Capacity - Mild Steel.....................0.055" to .75

                        Lincolnshire, IL
                        View Listing
                        3/4" x 48" Str.,Eldorado M75-1076,Spdl. & Feed Retrofit, F-18 Hi-Pres.Clnt.'83
                        New - 1983 Serial No. 993 SPECIFICATIONS: Capacity with 48" Stroke.........................................3/4" Diameter Gun Drilling Diameter Capacity - Mild Steel.....................0.055" to .75&

                        Lincolnshire, IL
                        View Listing
                        1 | 2 | 3