buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Drills & Tapping Machinery > New Jersey

Drills & Tapping Machinery in New Jersey For Sale

39 new & used drills & tapping machinery items for sale in New Jersey
1 | 2
Refine: Viewing 1 - 20 of 39 matches
Sort by:
Items Per Page:  20  |  50 |  100
8' Arm Lth 19" Col Dia Carlton 4A RADIAL DRILL, #6MT, Pwr Elevation  Clamping, 25 HP,
NATCO CARLTON 8' X 19" RADIAL ARM DRILL MODEL: 4A, S/N: 4A-6140, NEW: 1996   SPECIFICATIONS: ARM LENGTH ......................... 8' COLUMN DIAMETER .................... 19" VERTICAL TRAVEL OF SPIND
5' Arm Lth 11" Col Dia Carlton 1A 5' x 11" RADIAL DRILL, Power Elevation  Clampi
5' X 11" CARLTON RADIAL DRILL MODEL: 1A, S/N:  1A-4208,  NEW: 1973   SPECIFICATIONS: ARM LENGTH .......................... 5' FACE OF COLUMN TO CENTER OF SPINDLE . 9" TO 5' SPINDLE TO BASE
4' Arm Lth 12" Col Dia Yoshida YR5-115 RADIAL DRILL, Power Elevation,#5MT,Tapping,Box
45” X 12” YOSHIDA RADIAL DRILL, MODEL YR5-115, S/N  5882005           SPECIFICATIONS CAPACITIES MAXIMUM DISTANCE, COLUMN SURFACE   TO SPINDLE END
5' Arm Lth 11" Col Dia Carlton 1A RADIAL DRILL, Box Table,Power Elevation  Clamping,#
5' X 11" CARLTON RADIAL DRILL MODEL: 1A, S/N:  1A-4434,  NEW: 1988   SPECIFICATIONS: ARM LENGTH .......................... 5' FACE OF COLUMN TO CENTER OF SPINDLE . 9" TO 5' SPINDLE TO BASE
98" Arm 21" Column Sharp RD-2500 RADIAL DRILL
NEW SHARP 21.65" COLUMN, 98.42" ARM, RADIAL DRILL    MODEL:  RD-2500  **MADE IN TAIWAN**     FEATURES: Hardened and Ground Arm slide ways, gears Arm Elevation is controlle
4' Arm Lth 9" Col Dia San Yueh SY-1100 RADIAL DRILL, #4MT, Power Elevation, Box Table
3'6" X 8" SAN YUEH RADIAL DRILL MODEL: SY1100, S/N: 3067169,  NEW: 1989   SPECIFICATIONS: MAXIMUM DISTANCE SPINDLE TO COLUMN .. 42" MINIMUM DISTANCE SPINDLE TO COLUMN .. 8" COLUMN DIAM
4' Arm Lth 12" Col Dia Ooya RE-1225 H RADIAL DRILL, Power Elevation  Clamping, #4MT,
4' X 12" OOYA RADIAL DRILL MODEL: RE 1225 H,  S/N: OAS-11728,  NEW: 1980'S   SPECIFICATIONS: MAXIMUM DISTANCE SPINDLE TO COLUMN............ 48"   DIAMETER OF COLUMN....................
DELTA Mdl# 15-07 DRILL PRESS
CHUCK ..................... 3/8" TABLE ..................... 10" X 10" THROAT .................... 7-1/2"
WORNER TYPE B-4 DRILL PRESS (1 OF 2)
TYPE B-4 DRILL PRESS
SHIMAZU SUPER 6 TAPPER
EQUIPPED WITH: 200 LITER HYD. TANK CAPACITY 3.7 KW 480 VOLT MOTOR WEIGHT .......................... 2250 LBS. O.A. DIM. ....................... 65" X 45" X 69"
SNOW Mdl# NT-1 TAPPER
#0-#10 Tap Size Range Mild Steel 2" Tap Head Stroke 6000 RPM Note - Set up for Vibe Feed with Platform but requires Feeder Bowl AC Motor and Control Weight 6500 Lbs
4'6" x 12" Mas, Model VR 4, Radial Drill
Machine Specs: Column Diameter 12" Arm Length 4' 6" Head Travel 36" Arm Travel (Up & Down) 26" Spindle Taper #4 MT Spin
4' x 13" American Radial Drill, Model Hole Wizard
Machine Specs: Column Diameter 13" Arm Length 4' Face of Column to spindle Center 4
25” Doall Geared Head Drill with Power Down Feed
Machine Specs: Column Diameter 5” Column to Spindle Center 12-1/2” Table Size 17” x 21” Spindle Speeds (8) 85 - 1460 RPM Spindle HP 1.0/1.2 2 HP / 2 Speed 440 Volt 3 Phase Spindle Taper 3 MT Feeds .015, .010, .007
SNOW M#SD-1 TAPPING MACHINE
HP ........................ 1/2" SPEED ..................... 3450 220/3/60 CONTROL CIRCUIT AND LIGHT (110 VOLTS) OMI
CARLTON #3A RADIAL DRILL, FLOOR TYPE
CAPACITY .................................. 3-1/2" ARM ....................................... 5' EST, O,A, DIMENSIONS ...................... 17' L X 8' W X 13' HI EST. WEIGHT ..............................
AMERICAN 4' x 13" RADIAL DRILL
SPINDLE TRAVEL ........................ 18" SPINDLE SPEED ......................... (36) 12 - 1500 RPM HEAD TRAVEL ON ARM .................... 36" ARM TRAVEL ON COLUMN .................. 36" FEEDS (16)
12 SPINDLE NATCO MULTIPLE SPINDLE DRILL
20" x 34" I.D. Twelve Spindle Slip Plate 3" Centers Coolant 14' height
STANDARD #10-902 TOOL SECONDARY OPERATION DRILLING AND TAPPING MACHINE
BRAss - ALUMINUM .......................... 1/2" - 20" FEED RATE FORWARD OR BACK (@ 80 PSI)....... 0 - 150 IPM FEED RATE FORWARD OR BACK ................. 0 - 3" SPINDLE SPEEDS WITH 1725 RPMS WEIGHT ..
DAVENPORT #10-901 SECONDARY OPERATION DRILLING AND TAPPING MACHINE
THREE UNITS MOUNTED VERTICALLY TWO UNITS MOUNTED HORIZONTALLY ON EITHER SIDE OF INDEX TABLE. PNEUMATICALLY POWERED, HYDRAULICALLY CONTROLLED MECHANISM. EACH UNIT HAS A 3" STROKE. BRASS - ALUMINUM ............
Related Subcategories:
Condition:
Location:
  • X New Jersey (39)
Price:
  •  to 
1 | 2