Categories:
- X machine tools (52)
- X Rolls (52)
- X Angle Bending Rolls (52)
Price:
-
to
-
|
REFERENCE NUMBER: 17039B
MODEL #: 2VBR
SERIAL #: N/A
LEG IN ANGLE: ANGLE SIDES 3.5″ x 3.5″
LEG IN ANGLES: ANGLE THICKNESS 5/8″
LEG OUT ANGLES : ANGLE SIDES 5″ x 5″
LEG OUT ANGLES : ANGLE THICKNESS 3/8″
FLAT ON
3″ x 3″ x 5/16″ capacity new angle bending machine. Thanks to the combination of large roll shaft diameters and over-sized bearing assemblies, APK machines can produce more bending power and torque with less flexing of t
Hydraulic
Capacity 4" x 4" x 1/2"
Diameter of rolls 15"
Rolls for tube bending
5 HP
220v / 3 Phases
Weight 13,200 lbs
Dimensions 75" x 77" x 53"
Diameter of rolls 17"
Rolls for angle rolling
5 HP
440v / 3 Phases
Weight 13,200 lbs
Dimensions 80"x83"x55"
Hydraulic
Capacity 2" x 2" x 1/4"
Diameter of rolls 12"
Rolls for square PTR
1 HP
440v / 3 Phases
Dimensions 110" x 96" x 102"
Diameter of rolls 16"
Rolls for PTR angle rolling
20 HP
440v / 3 Phases
Weight 13,200 lbs
Dimensions 74" x 79" x 65"
Hydraulic
Capacity 2" x 2" x 1/4
6" Diameter of rolls
Roller Square, Angle
2.5 HP
220v / 3 Phases
Dimensions 32" x 42" x 57"
4" x 4" x 1/2" 4" 4" x 4" x 1/2" 4" x 4" x 72" 79" x 53" x 92" 102" x 72" x 92" EQUIPPED WITH AMAZING Amount Of Tooling Foot Pedal Push Button Control Foot Brake Hydraulic Pump
EQUIPPED WITH Siemens Movable CNC Simatic Controller Electrical Cabinet This Angle Roll Can Be Set-Up to Roll Material in Vertical or Horizontal Plain Hydraulic Powered Bottom Rolls Three Axis Hydraulic Lateral Angle Gui
Reference #28714
PULLMAX Z31 3" x 3" x 3/8" Hydraulic Angle Bending Roll
Model: Z31
FEATURES:
Pendant Control
Tooling
CAPACITY:
Angle Leg Out ......................... 3" x 3"
Reference #28713
PULLMAX Z41 5" x 5" x 1/2" Hydraulic Angle Bending Roll
Model: Z41
FEATURES:
Pendant Control
Tooling
Hydraulic Power Roll Adjustment
CAPACITY:
Angle Leg Out (Max) .....
BERTSCH #AR25 HYDRAULIC ANGLE BENDING ROLL
MODEL AR25
S/N M-10858 NEW 1996
CAPACITY:
ANGLE LEG-OUT ----
Capacity: :
Angle Leg Out (Minimum Inches) : 5" x 5" x 1/2" (50")
Angle Leg In (Minimum Inches) : 4" x 4 " x 1/2" (46")
Round Tube : 7" x 11 Ga.
Square Tube : 4" x 3/16"
Rectangle Tube : 5" x 2" x 1/4"
Square Bar
Capacity: :
Angles : 2 1/2" x 2 1/2" x 1/4"
Flat On Flat : 2" x 2" x 3/16"
Pipe : 2 1/2"
Diameter Of Rolls : 7"
Roll Speed : 33 FPM
Dimensions (L x W x H) : 60" x 48" x 60"
Weight : 4,000 Lbs.
Capacity: :
Angles- Leg Out : 2" x 2" x 1/4"
Min. Diameter : 20"
Flat Stock On Edge : 2" x 3/8"
Min. Diameter : 15"
Flat Stock On Flat : 6" x 1/2"
Min. Diameter : 14"
Rounds & Squares : 1 1/2"- 1 1/4"
Min. Diame
Capacity: :
Angles- Leg Out : 2" x 2" x 1/4"
Min. Diameter : 20"
Flat Stock On Edge : 2" x 3/8"
Min. Diameter : 15"
Flat Stock On Flat : 6" x 1/2"
Min. Diameter : 14"
Rounds & Squares : 1 1/2"- 1 1/4"
Min. Diame
Capacity: :
Angles- Leg Out : 4" x 4" x 5/8"
Mimimum Diameter : 40"
Angles- Leg In : 3 1/2" x 3/12" x 5/8"
Minimum Diameter : 48"
Flat On Flat : 9" x 1/4"
Minimum Diameter : 30"
Rounds : 2 3/4"
Minimum Diameter
Driven Rolls 3, Manufacturer Tauring Angle Bending Roll, Model No. Delta 50H, Serial No. 050D891, Year Mfg. 2000, Vert/Horz Horz, Features/Accessories w/ Tooling Package, Motor HP 8 HP, Condition Good, Comments Round Tub
Pullmax Angle Bending Rolls
S/N: Unk, Stock No: 17928
3” X 3” X 5/16” Leg Out
2 ½” X 2 ½” X 5/16”
2” Solid Rounds
All 3 Rolls Are Driven
4-5/16” Diameter Shafts
9-13/16” Tooling Diameter
7-7/16” Tooling
MANUFACTURER: BOLDERINI
MODEL #: BSA-16M
TYPE: VERTICAL
3"x3"x30" WITH TOOLING, MOTOR AND CONTROLS
SKID OF DIES AND STANDS
|