Machine Tools > Rolls

Metal Rolls for Sale

 
 

307 new & used metal rolls items for sale

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 307 matches Sort by: Items Per Page:  20  |  50 |  100
Price:
  •  to 
30" X 22 GA. QUALITY MANUAL SLIP ROLL
30" X 22 GA. QUALITY MANUAL SLIP ROLL PRICE: Loaded on Truck, Baltimore, MD Warehouse………… $300.00 HMC Stock No. 17091-P Machine Serial No. Unknown Machine Model No. Unknown New Date: Unknown Capacity: 22 Gau

York, PA
View Listing
36" X 22 GA. PEXTO MANUAL SLIP ROLL
36" X 22 GAUGE MANUAL SLIP ROLL PRICE: Loaded on Truck, Baltimore, MD Warehouse………… $400.00 HMC Stock No. 17090-P Machine Serial No. 51 Machine Model No. 381D New Date: Unknown Capacity: 22 Gauge Length of

York, PA
View Listing
Tauring Alpha 200 Horizontal Angle Roll
Specifications Driven Rolls 3 Shaft Diameter 20" Standard Shaft Working Length 15.75" Capacities (Round Tube) 10.5"x0.5" wall thickness (Square Tube) 10"x10"x0.40&quo
  • Length: 15.75"
  • Width: 20"

    SANTA ANA, CA
    View Listing
    5/16" x 5' WDM Plate Bending Roll
    USED HYDRAULIC 4-ROLL PLATE BENDING ROLL MODEL WDM 403-7-5 ♦ YEAR: 2012 Stock No. 10216 Specifications: Rated capacity: 5/16” x 5’ Nominal roll diameter: 7” Motor: 5 HP, 240/480/3/60 Weight: 4,500 lbs Standa
    • Roll length: 0.312"
    • Thickness: 7"

      Warren, MI
      View Listing
      5/8" x 8' WDM 403-12-8 4 Roll Plate Bending Machine
      NEW HYDRAULIC 4-ROLL PLATE BENDING ROLL MODEL WDM 403-9-8 Specifications: Rated capacity: 5/16” mild steel plate x 8’ wide Nominal roll diameter: 9” Motor: 10 HP Dimensions: 154” x 44” x 41” Weight: 10,700 lbs
      • Roll length: 0.625"
      • Thickness: 12"

        Warren, MI
        View Listing
        5/8" x 4' WDM 403-9-4 Plate Bending Roll
        REFURBISHED WDM HYDRAULIC 4-ROLL PLATE BENDING ROLL MODEL: 403-9-4 Stock No. 10213 Specifications: Rated capacity: 5/8” mild steel plate x 4’ wide Nominal roll diameter: 9” Motor: 10 HP Dimensions: 106” long x 44
        • Roll length: 0.625"
        • Thickness: 9"

          Warren, MI
          View Listing
          9/16" x 12' Bertsch Model 11 Initial Pinch Type Plate Bending Roll
          Reference #27862 9/16" x 12' Bertsch Model 11 Initial Pinch Type Plate Bending Roll New: 1972 CAPCACITY: Capacity At Full Length (Boiler Duty) . 9/16" Capacity At Full Length (Pipe Duty) ... 29/6
          • Roll length: 144"

            Melville, NY
            View Listing
            Eagle Model CP30P Angle Roll
            USED EAGLE ANGLE ROLL MODEL: CP30P ♦ YEAR:2000 Stock No. 10114 Capacity: (Mild steel) Max size-OD/Wall Min. Dia. Pipe: 1-1/2” Sch 40 20” Round Tube: 2-3/8” x 16 ga. 40” Square Tube: 1-1/2” x 11 ga. 40” Angl
            • Length: 1.5"
            • Width: 0.187"

              Warren, MI
              View Listing
              ROUNDO PS205 PLATE BENDING ROLL
              Bending  Capacity:    6'  x  3/8" Diameter  of  Top  Roll:    8" Motor:    5.4  HP   EQUIPPED  WITH:     Hydraulic &n

              Elk Grove Village, IL
              View Listing
              Tauring Delta 50H Angle Bending Roll. Model Delta 50H,
              Driven Rolls 3, Manufacturer Tauring Angle Bending Roll, Model No. Delta 50H, Serial No. 050D891, Year Mfg. 2000, Vert/Horz Horz, Features/Accessories w/ Tooling Package, Motor HP 8 HP, Condition Good, Comments Round Tub

              Elk River, MN
              View Listing
              SMT PULLMAX PV-7H-2500/0550 PLATE BENDING ROLL WITH 3 ROLLS, 2" X 8
              SPECIFICATIONS CAPACITY: 2" X 8' NUMBER OF ROLLS: 3 TOP ROLL DIAMETER: 32-5/8” PRE-BENDING: 2” X 96” TO 24” DIAMETER ROLLING: 2.5” X 96” TO 114” DIAMETER 2.75” X 60” TO 118” DIAMETER 3” X 60”
              • Roll length: 96"
              • Thickness: 2"

                Bethlehem, PA
                View Listing
                Voest Alpine Plate Roll   1979 model 5.5” x 144” Cold capacity  Price on Si
                Voest Alpine Plate Roll 1979 model 5.5” x 144” Cold capacity Price on Site: $525,000.00
                • Roll length: 144"
                • Thickness: 5.5"

                  Redondo Beach, CA
                  View Listing
                  Plate Bending Roll, Famar, A 312 20/2, 14 Gauge x 78"
                  Initial Pinch Plate Bending Rolls(Pyramid Type) Make: Famar Year: 1999 Capacity: 14 Gauge x 78" Electrical: 220/3phase Number of rolls: 3 Roll Diameter: 4.5" HP: 3
                  • Roll length: 78"

                    Mooresville, NC
                    View Listing
                    Bertsch Plate Bending Roll- Model #9 Capacity 8ft.x1/2"
                    Initial Pinch Plate Bending Roll Make: Bertsch Model: #9 Capactiy: 1/2" x 8ft. Roll Length: 96" Roll Diameter: 10" Electrical: 460/3 phase Built with rear roll geared Lower roll grooved longitudi
                    • Roll length: 96"
                    • Thickness: 0.5"

                      Mooresville, NC
                      View Listing
                      Pullmax Angle Bending Rolls
                      Pullmax Angle Bending Rolls S/N: Unk, Stock No: 17928 3” X 3” X 5/16” Leg Out 2 ½” X 2 ½” X 5/16” 2” Solid Rounds All 3 Rolls Are Driven 4-5/16” Diameter Shafts 9-13/16” Tooling Diameter 7-7/16” Tooling
                      • Length: 3"
                      • Width: 3"

                        Nashville, TN
                        View Listing
                        20,000 lbs. Aronson WSD 10 and WSI 10 Steel Wheeled Tank Turning Rolls
                        20,000 lbs. Aronson WSD 10 and WSI 10 Steel Wheeled Tank Turning Rolls S/N: (WSD10) 86102, (WSI10) 86139 New: 1986 EQUIPPED WITH: WSD10 Motorized and Driven Set with Hardened Steel Wheels. Variable Speed Drive
                        • Tonnage: 10T

                          lincolnwood, IL
                          View Listing
                          10' x 5/8" Bertsch Plate Roll, Power adjust, Air Drop End, 1981
                          We are pleased to offer for your consideration: (1) 10' x 5/8" Bertsch Initial Pinch Plate Bending Roll Price: $37,500 Serial: M-10531 Year: 1981 Bending length: 10' Bending capacity: 5/
                          • Roll length: 121"
                          • Thickness: 0.625"

                            Granger, IA
                            View Listing
                            JET® Slip Roll: SR-1650M, 756050
                            CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Bench Model Wire grooves are standard Perfect tool for sheet metal forming in HVAC and FAB-shops Suitable for many industrial, educational and vocational shop uses

                            Port Orange, FL
                            View Listing
                            JET® Slip Roll: SR-2236M, 756026
                            CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Bench Model Wire grooves are standard Perfect tool for sheet metal forming in HVAC and FAB-shops Suitable for many industrial, educational and vocational shop uses

                            Port Orange, FL
                            View Listing
                            JET® Slip Roll: SR-2024M, 756020
                            CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Bench Model Wire grooves are standard Perfect tool for sheet metal forming in HVAC and FAB-shops Suitable for many industrial, educational and vocational shop uses

                            Port Orange, FL
                            View Listing
                            1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>