buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 701 - 750 of 2219 matches
Sort by:
Items Per Page:  20 |  50  |  100
SHUSTER Mdl# 1A WIRE STRAIGHTENER
$RFQ
SHUSTER Mdl# 1A WIRE STRAIGHTENER
3/16" SHUSTER 1A STRAIGHTEN AND CUT MACHINE Manufacturer: SHUSTER Model: 1A Condition: GOOD Specifications: WIRE DIAMETER RANGE 062"- 187" MAX LENGTH 7'8" SPEED 120 FPM MOTOR HP 10 EL
SLEEPER & HARTLEY Mdl# 669 WIRE SPRING COILER
$RFQ
SLEEPER & HARTLEY Mdl# 669 WIRE SPRING COILER
WIRE DIAMETER .................... .062" - .207" WIRE FEED ......................... 72" INSIDE DIAMETER ................... 1/4" - 2-3/4" 30 - 90 SPRINGS PER MINUTE FULLMDRIVEN CLUTCH
NILSON Mdl# S0 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S0 WIRE FORMER WITH REEL
WIRE DIAMETER 1/16" MAX. FEED 6" EQUIPPED WITH; STOCK REEL ATTACHED CABINETS 1.5 HP 220/440 VOLTSD VARIABLE SPEED 1140 RPM WITH MOTOR AND CONTROLS
NILSON Mdl# S3 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S3 WIRE FORMER WITH REEL
WIRE DIAMETER 3/16" MAX.FEED 12" EQUIPPED WITH: STOCK REEL ATTACHED CONT5OLS 5 HP 220440 VOLTS VARIABLE SPEED 1725 RPM
NILSON Mdl# S3 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S3 WIRE FORMER WITH REEL
WIRE DIAMETER 3/16" MAX. FEED LWNGTH 12" FLOOR SPACE 61" X 78" WEIGHT 2375 LBS. EQUIPPED WITH: STOCK REEL ATTACHED CONTROLS
NILSON Mdl# S-1 4 SLIDE, WIRE FORMING MACHINE
$RFQ
NILSON Mdl# S-1 4 SLIDE, WIRE FORMING MACHINE
WIRE DIAMETER ................ 3/32" MAX FEED ..................... 8" SOLID CAMS 2 PLANE STRAIGHTENER MOUNTED CONTROLS WITH VARIDRIVE MOTOR AAND CONTROLS 5 HP 1725 1725 220/440 VOLT 3 PHASE 60 CYCLE
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
$RFQ
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1996 MODEL - JUPITER C NUMBER OF BLOCKS - 7 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
$RFQ
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1996 MODEL - JUPITER C NUMBER OF BLOCKS - 7 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
$RFQ
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1999 MODEL - JUPITER C NUMBER OF BLOCKS - 10 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
$RFQ
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1999 MODEL - JUPITER C NUMBER OF BLOCKS - 10 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
WIRE LAB Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
$RFQ
WIRE LAB Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
WIRE LAB COMPANY Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
3,000 Lb. HYDRAULIC UNCOILER
$RFQ
3,000 Lb. HYDRAULIC UNCOILER
3,000 Lb. Uncoiler: Maximum Coil O.D.: 48" Maximum Coil Width: 36" Coil I.D. Range: 16" - 20" SWIVEL BASE EQUIPPED WITH: 4 KEEPERS ELECTRIC DRAG BRAKE
8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
$RFQ
8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
8" (203mm) YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL THIS IS A 8" (203MM) API TUBE MILL ALONG WITH ROLLER CONVEYOR & PIPE TRANSFER TABLES TO STRAIGHTEN, END BEVEL, HYDROSTATIC TEST, NDT/ULTRASONIC
127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
$RFQ
127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
Manufacturer: Neirotti Italy / Thermatool USA / OTO Mills/ MAIR Research Tube Diameter Range: 42mm to 127mm Wall Thickness Range: 1.2mm to 4mm Line Direction: Right to Left Speed: 100mpm Complete Mill with the Fo
63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
$RFQ
63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
Manufacturer: MTM Italy Year: 1992 Diameter Range: 12.7mm to 63.5mm Wall thickness Range: 1.5mm to 4mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End U
60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
$RFQ
60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
Manufacturer: Oto Mills Installation: 1991 Update: 2007 Tube Diameter Range: 16mm to 60.3mm Thickness Range: 0.8mm to 3mm Tube Length: 4 to 8meter Mill Speed: 130 meter/minute Direction: Left to Rigth Complete
57mm x 3.5mm MTM Rafted Tube Mill Line with MAIR Packaging Line
$RFQ
57mm x 3.5mm MTM Rafted Tube Mill Line with MAIR Packaging Line
Manufacturer: MTM Italy Year: 1990 Diameter Range: 35mm to 57mm Wall thickness Range: 1.5mm to 3.5mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End Unc
1.25" x .080" Somenor Welded Tube Reducing Mill
$RFQ
1.25" x .080" Somenor Welded Tube Reducing Mill
Manufacturer: Somenor -Mill Capacity Wall Thickness Range: 0.6mm (0.023) - 2mm (0.078). Line Speed: 35 to 100 m/min. Tube O.D: 8mm (.315") - 32mm (1.25") Tube: 8 meter Shaft Diameter: 40mm (1.6")
1/2" NUTAP MAS 14 NUT TAPPER
$RFQ
1/2" NUTAP MAS 14 NUT TAPPER
1/2" Nutap Model MAS-14 Twin Spindle Nut Tapper 1/4"-1/2" Product Range ( Tap Size) 7500-15,000 PPH Hopper AC Motor and Controls
500 TON ESCO HYDRAULIC SWAGING PRESS
$RFQ
500 TON ESCO HYDRAULIC SWAGING PRESS
Machine Details: CAPACITY ........................... 500 TON OPEN ............................... 8" JAW TRAVEL ......................... 3" CLOSED ............................. 5" CENTER OF PIN TO C
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
$RFQ
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER MANUFACTURER - SUTTON S/N - 1164 PRODUCT CAPABILITY - SEAMLESS TUBING AND CASING TUBE RANGE - 3.5"-7.5" OD (88mm-190mm) STATUS - INSTALLED IN
70" KAMPF PRECISION ALUMINUM SLITTING LINE (2001)
$RFQ
70" KAMPF PRECISION ALUMINUM SLITTING LINE (2001)
Description Year 2001 Aluminum Alloys: 1145, 1100,3003, 7072, 811 Temper: 0 - H19 Entry Strip Width: 25" - 69" (635mm - 1753mm) Line Speed: 2600 FPM (800 Met/Min) Thickness: .002" - .015" (.05mm
60" x .250" HERR VOSS TRIPLE INJECTOR HEAD SLITTING LINE W/6HI STRAND EXTENSIONE
$RFQ
60" x .250" HERR VOSS TRIPLE INJECTOR HEAD SLITTING LINE W/6HI STRAND EXTENSIONE
Thickness: .015 - .250" Yield Strength: 50,000 PSI Max Shear Strength: 50,000 PSI Max Coil Size: Width: 12 - 60" I.D.: 20- 24" O.D.: 72" Max Weight: 40,000+ Pounds Max Slitter Capacity: 2
1550mm x 6mm x 33 Ton Fagor Loop Injector Slitting Line
$RFQ
1550mm x 6mm x 33 Ton Fagor Loop Injector Slitting Line
Manufacturer: Fagor Year: 1991 Material: Hot and Cold Rolled Steel Strip width: 500 to 1550mm Thickness Range: 0.9 to 6mm Line Speed: 75 to 150m/min Total AC Power Installed: 65HP Total DC Power Installed: 460HP
RAS MODEL 79.26 MULTIBEND CENTER, YEAR 2000
$RFQ
RAS MODEL 79.26 MULTIBEND CENTER, YEAR 2000
RAS MODEL 79.26 MULTIBEND CENTER NEW 2000 WORKING LENGTH MAX. 2560mm (100") SHEET THICKNESS MAX. 2.0mm (14 Ga) MILD STEEL 1.5mm (16 Ga) STAINLESS STEEL 3.0mm (0.025") ALUMINUM FINISHED PART LENGT
KRB DUAL ARBOR REBAR STRAIGHT & CUT MACHINE
$RFQ
KRB DUAL ARBOR REBAR STRAIGHT & CUT MACHINE
MANUFACTURER - KRB YEAR - 2007 FPM - 360 ARBOR - DUAL BAR CAPACITY - 10MM-16MM (#3-#5 REBAR) SHEAR - HYDRAULIC FLYING RUNOUT - 40'
1 1/4" x 12', PACIFIC 1000R HYDRAULIC SHEAR
$RFQ
1 1/4" x 12', PACIFIC 1000R HYDRAULIC SHEAR
SPECIFICATIONS: NOMINAL CAPACITY (MILD STEEL) 1" X 12' MAX CAPACITY MILD STEEL 1-1/4" X 12' RAKE ANGLE 5/8"/FT DISTANCE BETWEEN HOUSINGS 12'3" KNIFE SIZE 1-3/4" X 6-1/2" POWERED BAC
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008
$RFQ
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008 Line Technical Data Diameter of logs: minimum: 6 inches maximum: 16 inches (12" largest tested) maximum entry log le
12" x 16" DOALLL C-70 BAND SAW
$RFQ
12" x 16" DOALLL C-70 BAND SAW
Catalog Specs: Tube and or Flats: 12" x 16" Rated Capacity Rounds: 12-3/4" Rated Capacity Variable Blade Speeds: 60 to 350 FPM Blade Size:
8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
$RFQ
8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
Manufacturer - Ruesch Type - 4hi reversing Work roll - 2.5" x 8.5" Back up rOLL - 9.5" X 8.5" Current product - stainless steel ID/OD - 16" id/44" od
5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
$RFQ
5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
SPECIFICATIONS: MANUFACTURER: E.W. BLISS CO. (U.S.A.) TYPE: 4-HI COLD REVERSING MILL W/AGC WORK ROLL SIZE: 5" (127MM) DIA. 15 1/2" (394MM) FACE WORK ROLL BEARINGS: TIMKEN ROLLER BACKUP ROLL SIZE: 16�
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
$RFQ
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014) Mill Type 2 Hi - Single Direction (Right to Left) Roll Diameter
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
$RFQ
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL WITH HYDRAULIC SCREWDOWNS, NEW 2002 MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S) YEAR - 2002 SPEED - 550 FPM ROLL FACE - 19" ROLL DIAMETER -
SUMITOMO PLATE MILL
$RFQ
SUMITOMO PLATE MILL
Located in a Building- 250 Meters X 120Meters 500,000 Tons per year Installed 2006. Shutdown 2012 Material 1800mm x 12 - 20mm finished thickness Slabs - 250mm x 1500mm x 1500mm, 4.5 ton Equipment original 1980, Rei
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
$RFQ
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL Line Components: Melting Furnace Holding Furnace Inline Degassing Unit Tundish Casting Wheel - Properzir Model 7C Casting Wheel Sensor Arm Shear Pinch Roll
PRATT & WHITNEY THICKNESS GAUGES & SPARE PARTS - Mdl D, D-10 AND 10A
$RFQ
PRATT & WHITNEY THICKNESS GAUGES & SPARE PARTS - Mdl D, D-10 AND 10A
Pratt & Whitney Thickness Gauges & Spare Parts - Mdl D, D-10 and 10-A Large assortment of Pratt and Whitney thickness gauges and spare parts. Models include Model D, Model D-10, and Model 10-A. Parts include gauge
WEBB #RL3P INITIAL PLATE PINCH ROLLS
$RFQ
WEBB #RL3P INITIAL PLATE PINCH ROLLS
CAPACITY ........................ 8' X 1/4" ROLL DIAMETER .................... 8" WEIGHT ........................... 8000# O.A. DIMENSIONS ...(LRXFBXHI)..... 16' X 3'6"X4'4" EQUIPPED:
BOLDERINI Mdl# BSA-16M BAR STOCK ROLL FEED
$RFQ
BOLDERINI Mdl# BSA-16M BAR STOCK ROLL FEED
MANUFACTURER: BOLDERINI MODEL #: BSA-16M TYPE: VERTICAL 3"x3"x30" WITH TOOLING, MOTOR AND CONTROLS SKID OF DIES AND STANDS
COMPLETE SCHULER / CLEARING AUTOMATED TANDEM LINE
$RFQ
COMPLETE SCHULER / CLEARING AUTOMATED TANDEM LINE
1100 + 800 Ton Clearing Double Action Mechanical Press Pressure: 1100 + 800 Tons Daylight: 1200mm Stroke: 787mm Interior / 660mm Exterior Upper Bed Area: 2370 x 1350mm Interior / 1310-1617mm Exterior Low
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
$RFQ
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
MANUFACTURER: DANLY TONNAGE: 800 STROKE: 24" CUSHION STROKE: 12" SHUT HEIGHT: 38" ADJUSTMENT: 12" BED AREA 60" X 54" EAM AREA 60&
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
$RFQ
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
MANUFACTURER: DANLY TONNAGE: 800 STROKE: 24" CUSHION STROKE: 12" SHUT HEIGHT: 38" ADJUSTMENT: 12" BED AREA 60" X 54" RAM ATEA 60&
BLISS Mdl# C35 OBI SINGLE CRANK FLYWHEEL PRESS
$RFQ
BLISS Mdl# C35 OBI SINGLE CRANK FLYWHEEL PRESS
BLISS CUT-OFF PRESS CAPACITY: 35 TON STROKE: 3" BED AREA: 24" L-R, 17" F-B SHUT HEIGHT: 11" MOTOR 5HP, 550V
100 Ton WARCO Mdl# SC1-100-20-20H STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
100 Ton WARCO Mdl# SC1-100-20-20H STRAIGHT SIDE SINGLE CRANK PRESS
RATED CAPACITY .................. 100 TONS STROKE OF SLIDE ................. 1-1/2" STROKES PER MINUTE .............. 100 TO 300 ADJUSTMENT ...................... 3" SHUTHEIGHT S.D.A.U. ............. 12
100 TON WILKINS & MITCHELL HOT FORGING PRESS
$RFQ
100 TON WILKINS & MITCHELL HOT FORGING PRESS
REBUILT AND RETROFIT 2017 TO HOT FORGE BOLT Tonnage us ton 125 Capacity m42 dia Length 800 Stroke 8" Spm 45 Shut height 24" Bed area 30( front to back) 40" ( left to right) SEE YOUTUBE VI
WAFIOS Mdl# N4 HIGH SPEED NAIL MAKING MACHINE
$RFQ
WAFIOS Mdl# N4 HIGH SPEED NAIL MAKING MACHINE
One Used Wafios Model N4 High Speed Nail Header Serial Number E2407761 .070"-.122" Wire Diameter Range .511"-2.952" Nail Length Range 550 Pieces per Minute 2 Plane Straightener AC Motor an
60" x 60" x 144" ROCKFORD PLANER MILL
$RFQ
60" x 60" x 144" ROCKFORD PLANER MILL
SPECIFICATIONS HEIGHT UNDER RAIL .................... 60" DISTANCE BETWEEN COLUMNS ............. 60" TABLE STROKE ......................... 144" TABLE DIMENSION ...................... 48" X 140�
TOKO 5 DIE PROGRESSIVE HEADER, REBUILT 2001
$RFQ
TOKO 5 DIE PROGRESSIVE HEADER, REBUILT 2001
One Used 5 Die TOKO Model TPF-105F Progressive Cold Header, Serial No 001818 Built New 1990 Rebuilt 2001 10mm Cutoff Diameter 60mm Die Kickout Max. 70mm Cutoff Length 180 Pieces per Minute Equipped with: IFO
3/16" NATIONAL 4 DIE BOLT MAKING MACHINE
$RFQ
3/16" NATIONAL 4 DIE BOLT MAKING MACHINE
One Used 3/16" 4 Die National Progressive Cold Header 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length No Trimming, Pointing or Threading 110 Pieces
3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER
$RFQ
3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER
One Used 3/16" 4 Die National Progressive Header Serial No 23686 Built new 1956 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length 110 Pieces per Minute
3/16" NATIONAL 4 DIE PROGRESSIVE HEADER
$RFQ
3/16" NATIONAL 4 DIE PROGRESSIVE HEADER
One Used 3/16" 4 Die National Progressive Header Serial No 27072 Built New 1964 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length 110 Pieces per Minute
Categories:
Condition:
  • X Used (2219)
Manufacturer:
Location:
  • X New Jersey (2219)
Price:
  •  to 
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>