buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1801 - 1900 of 2219 matches
Sort by:
Items Per Page:  20 |  50 |  100
HAMMOND ROTARY AUTOMATIC, BURRING, BRUSHING, POLISHING & BUFFING MACHINE
$RFQ
HAMMOND ROTARY AUTOMATIC, BURRING, BRUSHING, POLISHING & BUFFING MACHINE
Hammond Rotary Automatic Burring, Brushing, Polishing and Buffing Machine with: (4) Hammond Independent Floor Type Wheel Heads, Type 50-81 Adjustable Base 15 HP (each) 440 Volt, 3 PH, 60 Cycle, 1750 RPM Spindle
HARTFORD MODEL #5-700 HIGH SPEED POINT FORMER
$RFQ
HARTFORD MODEL #5-700 HIGH SPEED POINT FORMER
BLANK DIAMETER ............... #2 - #4 BLANK LENGTH ................. 2" PIECES PER MINUTE ............ 700 EQUIPPED WITH: 18" VIBRATORY BOWLS VARIABLE SPEED ELECTRICS: AC MOTOR & CONTROLS WEIGHT:
FASTENER ENGINEERING MODEL #BHP-500 WIRE POINTER
$RFQ
FASTENER ENGINEERING MODEL #BHP-500 WIRE POINTER
3/8" Capacity EQUIPPED WITH 1/2 HP 115 VOLT 60 CYCLE MOTOR. O.A. DIMENSIONS: 4' LR X 1-1/2' FB X 4-1/2' HIGH
5,000# MITCHELL TUBE POINTER, CAPACITY 1-1/4"
$RFQ
5,000# MITCHELL TUBE POINTER, CAPACITY 1-1/4"
TWO HIT MODEL CAPACITY, TUBING .................... 1-1/4" EST. STROKE ON POINT ..................... 5" O.A. DIM. ........................... 30" X 50" X 48" HIGH WEIGHT ..................
5,000# MITCHELL PUSH POINTER, CAPACITY 1-1/4"
$RFQ
5,000# MITCHELL PUSH POINTER, CAPACITY 1-1/4"
SINGLE HIT MODEL CAPACITY, TUBING ...................... 1-1/4" EST. STROKE ON POINT ....................... 5" O.A. DIM. ............................. 32" X 36" X 48" HIGH WEIGHT .........
75,000# MITCHELL SIX (6) DIE HYDRAULIC TUBE PUSH POINTER
$RFQ
75,000# MITCHELL SIX (6) DIE HYDRAULIC TUBE PUSH POINTER
75,000# SIX (6) DIE HYDRAULIC PUSH PINTER SERIAL # PP-331 CAPACITY: RATED ..................75,000# @ 1910PSI MAXIMUM ................98,175# @ 2500PSI POINTING DIES ..........6" O.D. X 2-1/2
6" HYDRO STATIC TESTER
$RFQ
6" HYDRO STATIC TESTER
GENERAL SPECIFICATIONS: OPERATION MODES ........... AUTOMATIC / MANUAL / PASS THROUGH PRODUCT SPECIFICATION ..... ASTM A53 MAXIMUM PRESSURE .......... 5,000 PSI MAXIMUM PIPE DIAMETER ..... 6.625"OD MINIMUM PI
SUTER ALPHA 1, HVAC EQUIPMENT SPIRAL TUBE FORMER
$RFQ
SUTER ALPHA 1, HVAC EQUIPMENT SPIRAL TUBE FORMER
SPECIFICATIONS: CAPACITY: 18 GA. - FOR DBL, END BEAD OR CORRUGATING COIL WIDTH: 2-1/2" - 6-1/2" WIDE WORK SPEED CONTROL: VARIABLE AUTOMATIC CUT-OFF SAW w/SEAM PRODUCING AND LOCKING FIXTURE SELF CONT.
4" (101mm) 19 STD SMS-MEER #SRDW300 STRETCH REDUCING MILL
$RFQ
4" (101mm) 19 STD SMS-MEER #SRDW300 STRETCH REDUCING MILL
Technical Specifications: Pipe Diameter Entry................ 101mm Reduction Diameter Capacity........ 3" to 3/8" (76mm to 10mm) 4" to 3/4" (100mm to 20mm) Wall Thickness..............
DSAW HEAVY GAUGE PIPE MAKING PLANT BY 3 ROLL BENDER
$RFQ
DSAW HEAVY GAUGE PIPE MAKING PLANT BY 3 ROLL BENDER
A.PRODUCT SIZE : LENGTH : 6 METER MAX WALL THICKNESS : 6- 45 MM PIPE DIA : 450 - 4500 MM B.EQUIPMENT LIST 1.CNC GAS CUTTING MACHINE BUILT : 1997 MAKER : KODAKI, JAPAN NO. OF TORCH BLOCK : 3 BLOCK ( 4 TORCH X 3
10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
$RFQ
10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
WITH TOP/BOTTOM COIL SUPPORT PEELER TABLE ROLL SIZE ......... 6"DIA X 10"WIDE BELLY ROLLS ....... 10"W X 2-1/2 DIA BOTTOM ROLL DRIVER TOP ROLL HOLD DOWN SIDE GUIDES DRIVEN BY AC MOTOR EQUIPPED
NATIONAL #750, 5 DIE, S1 PARTS FORMER
$RFQ
NATIONAL #750, 5 DIE, S1 PARTS FORMER
YEAR 1974 300 TON PPM .......................... 40 - 65 MAX DIA CUTOFF MILD STEEL .... 1" MAX DIA ALLOY ................ 7/8" MAX LENGTH OF BLANK .......... 4" MAX DIE KICK OUT ............. 4
NATIONAL, 625 5 DIE, UNIVERSAL TRANSFER, COLD FORMER
$RFQ
NATIONAL, 625 5 DIE, UNIVERSAL TRANSFER, COLD FORMER
PPM ............ 70-80 MAX DIA CUTOFF.. 3/14" MILD STEEL MAX DIA CUTOFF.. 5/18" ALLOY STEEL MAX LENGTH OF BLANK... 2-1/2" MAX KICK OUT ......... 3' FLOOR SPACE ..... 82' X 174" HP ............
5/8" NATIONAL #625, 5 DIE, UNIVERSAL TRANSFER COLD FORMER
$RFQ
5/8" NATIONAL #625, 5 DIE, UNIVERSAL TRANSFER COLD FORMER
PPM ............ 70-80 MAX DIA CUTOFF.. 3/4" MILD STEEL MAX DIA CUTOFF.. 5/8" ALLOY STEEL MAX LENGTH OF BLANK... 2-1/2" MAX KICK OUT ......... 3' FLOOR SPACE ..... 82' X 174" HP ..............
SAKAMURA #NP430 FOUR DIE NUT FORMER
$RFQ
SAKAMURA #NP430 FOUR DIE NUT FORMER
NUMBER OF STATIONS ............. 4D X 4B NUT SIZE........................ M8 -M10 MAX CUTOFF DIA. ................ 10 - 17mm MAX CUTOFF LENGTH .............. 10 mm KO LENGTH ...................... 16 mm FORGING LOAD
SAN SHING TYPE M# SS-NA-24B NYLON RING NUT ASSEMBLE MACHINE
$RFQ
SAN SHING TYPE M# SS-NA-24B NYLON RING NUT ASSEMBLE MACHINE
SAN SHING MODEL SS-NA-24-B NYLON INSERT MACHINE Manufacturer: SAN SHING Model: SS-NA-24B Specifications: WIDTH ACROSS FLATS19-24MM MAX. THICKNESS OF NUT19.5MM MOTOR3 HP MAX. OUTPUT145 PPM APPROX. WEIGHT3300 L
CHUN ZU NA24B NUT ASSEMBLY MACHINE
$RFQ
CHUN ZU NA24B NUT ASSEMBLY MACHINE
One Used Chun Zu Type NA24B Nut Assembly Machine, Serial No 95058, Mfg. 1995 Maximum Nut Size M12-M16 Maximum Nut Size 1/2"-5/8" Approx. Weight 1765 Lbs Maximum production 130 PPM Main Motor 3 HP Size (
CHUN ZU NA 19B NUT ASSEMBLY MACHINE
$RFQ
CHUN ZU NA 19B NUT ASSEMBLY MACHINE
CHUN ZU NA19B NUT ASSEMBLY MACHINE Manufacturer: CHUN ZU Model: NA19B S/N: 95097 Year: 1995 Specifications: MAX. NUT SIZEM10 - M12 NUT SIZE MAX.3/8 - 1/2" APPROX. WEIGHT1325 LBS MAX OUTPUT160 PP
NATIONAL M# S2-M20, 5 STATION COLD NUT FORMER
$RFQ
NATIONAL M# S2-M20, 5 STATION COLD NUT FORMER
One Used National 5/8" S2 5 Die Cold Nut Former Serial No 43921, Mfg. 1980 1" Cutoff Diameter 15/16" Cutoff Length 1 3/8" Die KO 1 3/16" Across Hex Flats 105 Pieces per Minute Equipped
5/8" NATIONAL M#164, 4 DIE, HIGH SPEED NUT FORMER
$RFQ
5/8" NATIONAL M#164, 4 DIE, HIGH SPEED NUT FORMER
CAPACITY ............................... 5/8" PPM .................................... 200 MAX HEX NUT ACROSS FLATS ............... 24mm MAX NUT HEIGHT ......................... 17.5mm MAX LENGTH OF BLANK ...
3/8" NATIONAL NUT FORMER
$RFQ
3/8" NATIONAL NUT FORMER
PPM ................ 100 MAX ACROSS FLATS ... 11/16" MAX NUT HEIGHT ..... 17/32" MAX BLANK LENGTH ... 11/16" MAX KICK ........... 3/4" L X W .............. 6' X 11' WEIGHT ............. 24,000#
GAIRU #MC-5 NIBBLER MACHINE
$RFQ
GAIRU #MC-5 NIBBLER MACHINE
44" THROAT Circular Cutting 44" Maximum Diameter 4" Minimum Diameter 1400-2800 Strokes per minute Equipped with: 1.5 HP 50 cycle, 220/380 volt, 1.1 KW Motor 3 phase / 50hz Weight 1630 lbs. Ov
WAFIOS MODEL #BT25 HIGH SPEED TACK MACHINE
$RFQ
WAFIOS MODEL #BT25 HIGH SPEED TACK MACHINE
MAXIMUM WIRE DIAMETER ............... .12" WIRE LENGTH ......................... .70" - 1.96" PIECES PER MINUTE ................... 175 O.A. DIM. ........................... 90" L X 48" W X 47
WAFIOS MODEL #BT20 HIGH SPEED TACK MAKER
$RFQ
WAFIOS MODEL #BT20 HIGH SPEED TACK MAKER
MAXIMUM WIRE DIAMETER ............... .078" WIRE LENGTH ......................... 55" TO 90" PIECES PER MINUTE ................... 230 O.A. DIM. ........................... 83" L X 40" W X 4
WAFIOS MODEL #BT15 HIGH SPEED TACK MAKER
$RFQ
WAFIOS MODEL #BT15 HIGH SPEED TACK MAKER
MAXIMUM WIRE DIAMETER ............... .060" WIRE LENGTH ......................... .39" TO .70" PIECES PER MINUTE ................... 275 O.A. DIM. ........................... 65" L X 32" W X 4
GLADER #00 NAIL MAKER
$RFQ
GLADER #00 NAIL MAKER
Glader "00" Nail Header .025"-.060" Wire Diameter 1/4"-1 1/4" Nail Length 550 Pieces per Minute AC Motor and Controls Weight - 1500Lbs. Overall Dimensions: 39 x 49
GLADER #00 NAIL MAKER
$RFQ
GLADER #00 NAIL MAKER
Glader "00" Nail Header .025"-.060" Wire Diameter 1/4"-1 1/4" Nail Length 550 Pieces per Minute AC Motor and Controls Weight - 1500Lbs. Overall Dimensions: 39 x 49
10" X 36" U.S. MACHINE MODEL #V, KNEE VERTICAL MILL
$RFQ
10" X 36" U.S. MACHINE MODEL #V, KNEE VERTICAL MILL
SPECIFICATIONS: TABLE: 10" x 36" (6) SPINDLE SPEEDS: 250, 475, 1200 1800, 2850 RPM EQUIPPED WITH: POWER DOWN FEED ON QUILL POWER LONG FEED 1/4 HP, 220/440/3/60 (10) COLLETS PUSH BUTTON MOTOR START
13.2 Ton, GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS W/ INGOT CARS (2
$RFQ
13.2 Ton, GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS W/ INGOT CARS (2
Manufacturer - Glama Demag SMS Year - 1991 Status - Installed and under power Specifications Carrying Capacity: 13.2 US tons (120kN) Clamping Moment: 90 ft tons (250 kNm) Load Moment (Related to Center of Front
200mm KZ TENSION LEVELING LINE w/SLITTER, WIDE 5-1/2"
$RFQ
200mm KZ TENSION LEVELING LINE w/SLITTER, WIDE 5-1/2"
SPECIFICATIONS: CAPACITY WIDE ................ 5-1/2" ARBOR SIZE ................... 1-3/8" DIA x 5-1/2" LONG UNCOILER ..................... 14" ID 27" OD 5-1/2" FACE 2 ARM TURNSTY
1300MM (51.18") CLECIM SIEMENS VAI COMBINED TEMPERING AND TENSION LEVELING LINE
$RFQ
1300MM (51.18") CLECIM SIEMENS VAI COMBINED TEMPERING AND TENSION LEVELING LINE
Material: cold rolled strip, annealed cold rolled strip and hot deep galvanized strip Manufacturer: Siemens VAI Clecim Year: 1989 Strip/Material: Strip width: 600 - 1300 mm (23.62" - 51.18") Strip t
7-1/4" KOHLER #18-1000-2, PRECISION LEVELER AND UNCOILER, ROLL 3/4" DIA x 7-1/4&
$RFQ
7-1/4" KOHLER #18-1000-2, PRECISION LEVELER AND UNCOILER, ROLL 3/4" DIA x 7-1/4&
SPECIFICAITONS: NO. OF ROLLS - 19 (9 OVER 10) ROLL SIZE - 3/4" DIA x 7-1/4" WIDE (APPROX) LATERAL ROLL BANK ADJUSTMENT AIR OPERATED PINCH FEED MOTORIZED SCREWDOWNS ENTRY GUIDE ROLLS CONTROL PANEL
60" X .090" HERR VOSS INVERTED PRECISION LEVELER
$RFQ
60" X .090" HERR VOSS INVERTED PRECISION LEVELER
Year 1977 Serial Number S12897 / 4078 Model 72/1.687/19/7 RH Thickness Range: .024" - .090" Width Range: 60" Max - 12" Min Length Range: 144" Max - 24" Min Pack Height: 17" + 4&
7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER
$RFQ
7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER
SPECIFICATIONS: MANUFACTURER: BRUDERER A.S. (SWITZERLAND) TYPE: 19 ROLL BACKED UP LEVELER MODEL No.: 24180B SERIAL No.: 5
LEIFELD 0.125" X 52" MDL# ATM400 HYD. AUTO. TEMPLATED CONTROLLED SPINNING LATHE
$RFQ
LEIFELD 0.125" X 52" MDL# ATM400 HYD. AUTO. TEMPLATED CONTROLLED SPINNING LATHE
CENTER HEIGHT: 26" SWING OVER BED: 52" (10" RISER INSTALLED) TURNING LENGTH: 41" FORMING SLIDE CROSS TRAVEL: 10-3/4" HYD. TAILSTOCK STROKE: 25-1/2" SPINDLE SPEEDS (8): 108 TO 1084RPM
MORANDO #PA-25 LATHE
$RFQ
MORANDO #PA-25 LATHE
CHUCK TO CENTER .............. 62.5" 62" swing 22" center to ways O.A. DIM. .................... 130" X 44" X 67.5" WEIGHT ....................... 5,525 LBS. EQUIPPED WITH:
SOUTHBEND LATHE
$RFQ
SOUTHBEND LATHE
65" total bed length 34" Center to center 5" 3 Jaw chuck 12" swing over bed quick change gearbox for feed changes 208 Volt 3 phase 4.7 amp O.A. DIM. - 66" X 24" X 54" WE
20" X 84" WAFUM MODEL #TUD40/60, ENGINE LATHE
$RFQ
20" X 84" WAFUM MODEL #TUD40/60, ENGINE LATHE
SPECIFICATIONS: SWING OVER WAYS .............. 20" SWING OVER CROSS SLIDE ....... 12-1/8" DISTANCE BETWEEN CENTERS ..... 80" SPINDLE SPEEDS ............... (36) 18 TO 1800 FEEDS ....................
30" X 120" MONARCH HEAVY DUTY ENGINE LATHE
$RFQ
30" X 120" MONARCH HEAVY DUTY ENGINE LATHE
(1) Used 30" x 120" MONARCH Heavy-Duty Engine Lathe, Model 20" CM, S/N 41601 Specifications: Swing Over Bed:30" Swing Over Cross Slide:20" Distance Center to Center:120" Spindle Sp
33" X 84" MASINEXPORT (ROMANIA) ENGINE LATHE
$RFQ
33" X 84" MASINEXPORT (ROMANIA) ENGINE LATHE
(1) Used 33" x 84" MASINEXPORT (Romania) Engine Lathe, New 1975 (est) Specifications: Actual Swing Over Bed:33-1/2" Swing Over Cross Slide:20" Distance Center to Center:84" Spindle Spee
BRITAN LATHE
$RFQ
BRITAN LATHE
O.A. DIM. - 38" X 23" X 54" WEIGHT - 640 LBS, SE
22"/31" X 157" TARNOW GAP BED ENGINE LATHE
$RFQ
22"/31" X 157" TARNOW GAP BED ENGINE LATHE
(1) Used 22"/31" x 157" TARNOW Gap-Bed Engine Lathe, Model TUJ50M, S/N 3436, New 1993 Specifications: Swing Over Bed:22" Swing Over 11-1/4" Removable Gap:31-1/2" Swing Over Cross Sl
20" X 80" STANDARD MODERN ENGINE LATHE
$RFQ
20" X 80" STANDARD MODERN ENGINE LATHE
SPECIFICATIONS: MAXIMUM SWING OVER BEDWAYS: 20" MAXIMUM SWING OVER CROSS SLIDE: 12" MAXIMUM DISTANCE BETWEEN CENTERS: 80" SPINDLE SPEEDS: (18) 27 TO 1600 RPM SPINDLE NOSE: D-1-8" SPINDLE HOLE:
OKUMA LH-35 CNC FLAT BED LATHE RETROFITED IN 1995 BY OLYMPIA ENGINEERING
$RFQ
OKUMA LH-35 CNC FLAT BED LATHE RETROFITED IN 1995 BY OLYMPIA ENGINEERING
SWING OVER BED.......................... 24" SWING OVER CROSS SLIDE.................. 13.8" DISTANCE BETWEEN CENTERS................ 120" DIAMETER OF SPINDLE BORE................ 3.54" SPINDLE SPE
22" X 78" MONARCH MODEL #61 LATHE
$RFQ
22" X 78" MONARCH MODEL #61 LATHE
SPECIFICATIONS: SWING OVER WAYS ........................ 22-1/2" SWING OVER CROSS SLIDE ................. 14" DISTANCE BETWEEN CENTERS ............... 72" SPINDLE SPEEDS ......................... (3
20" X 78" LODGE & SHIPLEY MODEL #2013 POWERTURN, ENGINE LATHE
$RFQ
20" X 78" LODGE & SHIPLEY MODEL #2013 POWERTURN, ENGINE LATHE
SPECIFICATIONS: SWING OVER WAYS ........................... 20-1/2" SWING OVER CROSS SLIDE .................... 13" DISTANCE BETWEEN CENTERS .................. 78" SPINDLE SPEEDS ....................
20" X 78" LEBLOND ENGINE LATHE
$RFQ
20" X 78" LEBLOND ENGINE LATHE
SPECIFICATIONS: SERIAL ........................... NE6469 SWING OVER BED ................... 20-1/2" SWING OVER CROSS SLIDE ........... 13-1/2" DISTANCE BETWEEN CENTERS ......... 78" SPINDLE SPEEDS
TACCHI MODEL FTF 1600 CNC LATHE
$RFQ
TACCHI MODEL FTF 1600 CNC LATHE
SPECIFICATIONS: Swing over the cross slide 45" Bed Width 35.43" Saddle Length 46.85" Tailstock None Height from floor to centerline, including grouting 59" Spindle Hole 14.569" Spindle
TACCHI MODEL FTF 1600 CNC LATHE
$RFQ
TACCHI MODEL FTF 1600 CNC LATHE
SPECIFICATIONS: Swing over the cross slide 45" Bed Width 35.43" Saddle Length 46.85" Tailstock None Height from floor to centerline, including grouting 59" Spindle Hole 14.569" Spindle
1/2" MANVILLE DSOD MODEL #500-C MAGAZINE FEED ROD HEADER
$RFQ
1/2" MANVILLE DSOD MODEL #500-C MAGAZINE FEED ROD HEADER
MAXIMUM WIRE DIAMETER ................ 1/2" (NOMINAL) LONG DIE AREA ........................ 12" EXTENDED GATHER AND PULL OFF EQUIPPED WITH: 60" MAGAZINE AND FLYWHEEL BRAKE ELECTRICAL MOTOR AND CO
1/4" WATERBURY DSSD ROD HEADER
$RFQ
1/4" WATERBURY DSSD ROD HEADER
MAKE: WATERBURY DIE POCKET: 4" MAX. WIRE DIAMETER: 1/4" FLYWHEEL RPM: 120 EATON AIR CLUTCH FLOOR SPACE 42" X 33" WEIGHT 2100#
WATERBURY #22 O.D.D.S. COLD HEADER
$RFQ
WATERBURY #22 O.D.D.S. COLD HEADER
MAX WIRE DIA ............ 3/8" MAX SHANK LENGTH ........ 6" MIN SHANK LENGTH ........ 1" MAX CUTOFF LENGTH ....... 7-3/4" 80 PPM WEIGHT .................. 23,000 POUNDS O.A. DIM. ...........
9/16" WATERBURY-FARREL M#100, RAY CARL 2 DIE 3 BLOW COLD HEADER
$RFQ
9/16" WATERBURY-FARREL M#100, RAY CARL 2 DIE 3 BLOW COLD HEADER
SPECIFICATIONS: MAX. WIRE DIAMETER ................... 9/16", MAX 70,000 PSI MAX. SHANK LENGTH .................... 4" MAX. WIRE CUTOFF ..................... 4" SPEED ................................
SACMA SP 21C DOUBLE STROKE SINGLE DIE COLD HEADER
$RFQ
SACMA SP 21C DOUBLE STROKE SINGLE DIE COLD HEADER
WIRE DIAMETER ................ 5/32" - 5/16" MAX LENGTH UNDER HEAD ........ 2" MAX CUTOFF LENGTH ............ 3" PPM 250 HP 15 L x W x H
1/2" NAKASHIMADA M# M-40 COLD HEADER
$RFQ
1/2" NAKASHIMADA M# M-40 COLD HEADER
1/2" NAKASHIMADA MODEL H40 DSSD COLD HEADER Manufacturer: NAKASHIMADA Model: H40 S/N: 940007 Year: 1994 Condition: GOOD Specifications: MAXIMUM CUTOFF DIAMETER - 16MM MILD STEEL MAXIMUM CUTOFF DIAMETER -
THOMPSON SURFACE GRINDER
$RFQ
THOMPSON SURFACE GRINDER
TABLE SIZE ............. 8" X 32" (T SLOTTED) MAG CHUCK .............. 8" X 25" PERM MAG GRINDING WHEEL ......... 1' X 9" EQUIPPED WITH: AUTO CYCLE TRUEING DEVICE O.D. 80" LR X
THOMPSON MODEL #B SURFACE GRINDER
$RFQ
THOMPSON MODEL #B SURFACE GRINDER
SPECIFICATIONS: TABLE WORK SURFACE .... 12" X 39" TABLE TRAVEL, MAX ..... 29" CLEARANCE UNDER NEW WHEEL ...... 12" WHEEL SIZE ............ 12" X 2" X 5" (HUB SIZE) MAG CHUCK SIZE
6" X 14" KENT KGS-200 SURFACE GRINDER
$RFQ
6" X 14" KENT KGS-200 SURFACE GRINDER
MODEL - kgs-200 GRINDING aREA - 6" X 14" WHEEL dIAMETER - 6" MAIN MOTOR - 1.5 hp WEIGHT - 1390 LBS OA dIMS - 45" X 47" X 63" EQUIPPED wITH: Mounted Start/Stop Buttons V-3 Grade
KENT MODEL #KG5-200 SURFACE GRINDER
$RFQ
KENT MODEL #KG5-200 SURFACE GRINDER
YEAR: 1992 SPECIFICATIONS: DIAMETER OF GRINDING WHEEL: 8" WIDTH OF GRINDING WHEEL : 1/2" MAG CHUCK SIZE (F-B x LR) : 6" x 12" MAXIMUM HEIGHT UNDER WHEEL: 18" TABLE SIZE (L-R x F-B)
20" X 168" CHURCHILL M# D ROLL GRINDER
$RFQ
20" X 168" CHURCHILL M# D ROLL GRINDER
SPECIFICATIONS: TRAVERSING TABLE TYPE ..................... ROLL GRINDER MAXIMUM SWING OVER WORK BED ............... 24" MAXIMUM ROLL DIAMETER ..................... 20" LENGTH BETWEEN CENTERS ............
14" X 48" NORTON ROLL GRINDER
$RFQ
14" X 48" NORTON ROLL GRINDER
SERIAL NUMBER: 21542 YEAR OF MANUFACTURE : 1942 DIAMETER ............ 14" (355mm) LENGTH .............. 48" (1220mm)(CENTER-TO-CENTER) GRINDING WHEEL: 30" (762mm) DIAMETER X 3' (76mm) WIDE 12&#
10" X 48" NORTON MODEL #26-47314-70 CYLINDRICAL GRINDER
$RFQ
10" X 48" NORTON MODEL #26-47314-70 CYLINDRICAL GRINDER
SERIAL NUMBER: CTU 23162 MODEL NUMBER : 26-47314-70 YEAR OF MANUFACTURE : 1949 DIAMETER ............ 10" (254mm) LENGTH .............. 48" (1220mm)(CENTER-TO-CENTER) GRINDING WHEEL: 30" (762mm) D
24" X 98.5" HERKULES MODEL #WS-300 ROLL GRINDER
$RFQ
24" X 98.5" HERKULES MODEL #WS-300 ROLL GRINDER
SWING: MAXIMUM DIAMETER TO BE GROUND... 24" DIAMETER (NEW WHEEL) MINIMUM D8AMETER........... 1-1/2" GRINDING WHEEL SIZE ........... 24" X 2" DISTANCE BET. CENTERS ......... 98-1/2" MAXIMUM
WAFIOS MODEL #MSE.500 DOUBLE END GRINDER
$RFQ
WAFIOS MODEL #MSE.500 DOUBLE END GRINDER
EQUIPPED WITH TWO DIFFERENT SIZE GRINDING STONES. SIZE #1 .......... 14" DIA SIZE #2 .......... 17" DIA DRIVE: 1.5 KW, 220/380V, 50CYC, 965 RPM OVERALL SIZE: 37" L x 32" W x 50" H
WAFIOS MODEL #MSD DOUBLE END GRINDER
$RFQ
WAFIOS MODEL #MSD DOUBLE END GRINDER
EACH HEAD EQUIPPED WITH 10" DIA. GRINDING WHEELS OVERALL SIZE: 46" L x 30" W x 66" H
6 1/8" Max x 24' Max Western Billet Grinder
$RFQ
6 1/8" Max x 24' Max Western Billet Grinder
NEW 1981 REBUILT ELECTRICS & HYDRAULICS 2000 SPECIFICATIONS: THE GRINDER IS USED TO REMOVE SCALE AND DEFECTS FROM VARIOUS COMPOSITION BILLETS AT INTERMEDIATE STAGES OF PRODUCTION. THE ADVACED GRINDER SYSTEM IN
1250mm HOT DIP CONTINUOUS GALVALUME AND GALVANIZING LINE (CGL)
$RFQ
1250mm HOT DIP CONTINUOUS GALVALUME AND GALVANIZING LINE (CGL)
I. Specification 1. Thickness 0.25-1.0mm 2. Width 600-1,250mm 3. Coil Entry Coil Weight MAX.25T/C Entry Coil OD/ID 2,150/508(610)? Exit Coil Weight MAX.15T/C Exit Coil OD/ID 1,850/508? 4.Line Speed Entry 20-130m
RADIANT TUBE FIRED ROLLER HEARTH ANNEALING FURNACE
$RFQ
RADIANT TUBE FIRED ROLLER HEARTH ANNEALING FURNACE
Radiant Tube Fired Roller Hearth Annealing Furnace Capacity: Min Length ............... 10' Max Length ............... 45' Min Size ................. 1" OD by .080" wall (.75 pounds per foot) Max S
AJAX MAGNETHER MIC MODEL #PACER 1 INDUCTION FURNACE
$RFQ
AJAX MAGNETHER MIC MODEL #PACER 1 INDUCTION FURNACE
CONSISTING OF: - ELECTRIC ANNEALING TYPE - NITROGEN ATMOSPHERE - INPUT 1,176-KVA, - 1,080 - AMPERES, - 1,050-KW OUTPUT - 1320-AMPERES, - BASKET FEED, - 9'8" SIZE, STRAIGHTENS - COOL DOWN, STRAIGHTENS, -
GRANCO CLARK MODEL #69-55-5, GAS-FIRED BILLET FURNACE
$RFQ
GRANCO CLARK MODEL #69-55-5, GAS-FIRED BILLET FURNACE
SPECIFICATIONS: MANUFACTURER: GRANCO CLARK FURNACE CO. YEAR OF MANUFACTURE: 1999 MODEL No.: 69-55-5 ORDER No.: 12229 TYPE: GAS-FIRED BILLET FURNACE FOR PRE-HEAT PRIOR TO EXTRUSION PREVIOUS USE: COPPER BILLETS 8
GRANCO BILLET FURNACE
$RFQ
GRANCO BILLET FURNACE
NATURAL GAS FIRED (6) BURNERS 1750 FARENHEIT DEGREES MAXIMUM TEMPERATURE 9" BILLET DIAMETER
GRANCO BILLET FURNACE
$RFQ
GRANCO BILLET FURNACE
NATURAL GAS FIRED (6) BURNERS 1750 FARENHEIT DEGREES MAXIMUM TEMPERATURE 9" BILLET DIAMETER
LEE WILSON BELL ANNEALING FURNACE
$RFQ
LEE WILSON BELL ANNEALING FURNACE
60" X 54" TEMPERATURE 1650 DEGREES F. (8) BASES (8) RETORTS (4) FURNACES ALL CONTROLS, BLOWERS
108" (2743mm) x 66" (1676mm)LEE WILSON GAS-FIRED BELL ANNEALING FURNACE
$RFQ
108" (2743mm) x 66" (1676mm)LEE WILSON GAS-FIRED BELL ANNEALING FURNACE
MANUFACTURER: LEE WILSON CO. (U.S.A.) TYPE: BELL ANNEAL FURNACE FOR BRASS & COPPER FUEL: GAS-FIRED W/ATMOSPHERE No. OF FURNACES:
RAD-CON BELL TYPE ANNEALING FURNACE
$RFQ
RAD-CON BELL TYPE ANNEALING FURNACE
132" DIA X 66" HIGH NITROGEN ATMOSPHERE 2 COVERS 2 BASES PROGRAMMABLE TEMPERATURE CONTROLS ELECTRONIC HEAT CONTROL SYSTEM UNIT INCLUDES SEPARATE COOLING SYSTEM
TOKYO GASDEN M# TBE415 BELT FURNACE RD TYPE CONVEYOR TEMPERING OVEN
$RFQ
TOKYO GASDEN M# TBE415 BELT FURNACE RD TYPE CONVEYOR TEMPERING OVEN
MODEL TBE-145 BELT TYPE ANNEALING FURNACE 932F DEGREES 13.5 KW 220 VOLT 20" WIDE BELT TYPE USED FOR HEAT TREATING SPRINGS
(4) 1550MM x 2500MM x 30TON GRUNEWALD HNX BELL FURNACES
$RFQ
(4) 1550MM x 2500MM x 30TON GRUNEWALD HNX BELL FURNACES
Max. load: 30000kg Max. diameter: 1850/1700 mm Max. height: 2450 mm Age: +/- 1975 Gas Type: natural gas for the furnace 95% N2 and 5% H2 for the atmosphere Inner covers: 9 big, 6 small Cooling hoo
114" (2900mm)W x 110" (2800mm)H RAD-CON WIRE BELL ANNEALING FURNACE SYSTEM
$RFQ
114" (2900mm)W x 110" (2800mm)H RAD-CON WIRE BELL ANNEALING FURNACE SYSTEM
Including: - Equipment type: High convection, bell-type annealing furnaces and bases. - Brand: RAD-CON - Quantities: 4 bases + 4 furnaces - Year Built: Various (1970-1997) - Upgrades: New Automation System in 201
TOKYO GASDEN MODEL #TBC210 ELECTRIC FURNACE
$RFQ
TOKYO GASDEN MODEL #TBC210 ELECTRIC FURNACE
CONTINOUS FURNACE: 8" WIDE MESH BELT CAPACITY: 8KW VOLTAGE: 220, 3PH MAXIMUM TEMP: 500 C WITH CONTROLS: TEMP TACHO METER TIMER 0-24 HS EXHAUST DUCTING OVERALL SIZE: 82" L x 31" W x 52"
GASMAC CAR BOTTOM BATCH TYPE ANNEALING OVEN
$RFQ
GASMAC CAR BOTTOM BATCH TYPE ANNEALING OVEN
SERIAL No. ................... JW020469 TYPE ......................... CAR BOTTOM BATCH TYPE CAR CAPACITY ................. 7,200# APPROX MAX OPPERATING TEMPERATURE ... 780 DEGREES FARENHEIT No. RECIRCULATING FANS .
CONSOLIDATED ENGINEERING CO. FLASH ANNEALING OVEN
$RFQ
CONSOLIDATED ENGINEERING CO. FLASH ANNEALING OVEN
Manufacturer - Consolidated Engineering Co Year - 1993 Use - Flash Anneal Blanks Two (2) Heating Zones Max Temp 850 degrees 15' long One (1) Cooling Zone 32' Long Capacity 5,000 lbs/hr .375" thick
16' X 60' MG MESSER MULTIPROCESS MPC-2016 CNC PLASMA CUTTING MACHINE
$RFQ
16' X 60' MG MESSER MULTIPROCESS MPC-2016 CNC PLASMA CUTTING MACHINE
center> SPECIFICATIONS: MAXIMUM CUTTING WIDTH 16' RAIL CENTERS 19' MAXIMUM CUTTING LENGTH 60' OVERALL LENGTH OF TRACK 70' PLASMA TORCH STATIONS 2 MAXIMUM CUTTING THICKNESS (HD3070) 1/
24" X .120" JAYBIRD MODEL #J15-2412 STOCK STRAIGHTENER
$RFQ
24" X .120" JAYBIRD MODEL #J15-2412 STOCK STRAIGHTENER
AIR FEED WITH PULL THROUGH 5 ROLL STRAIGHTENER MAXIMUM STOCK WIDTH ..................... 24" MAXIMUM STROKE LENGTH ................... 12" MAXIMUM STOCK THICKNESS ................. .12" MAXIMUM STROK
48" COOPER FEEDER AND STRAIGHTENER
$RFQ
48" COOPER FEEDER AND STRAIGHTENER
Cooper 48" feeder/straightener Capacity - 48" Rolls - 4
36" COE STOCK #CF-400 FEEDER
$RFQ
36" COE STOCK #CF-400 FEEDER
STOCK FEED 36" x 36"
20" X .150" SESCO MODEL #56-95 FEEDER
$RFQ
20" X .150" SESCO MODEL #56-95 FEEDER
COIL WEIGHT .................... 16,000# STOCK WIDTH .................... 10" TO 20" OUTPUT RATE .................... 15 TO 45 FPM USS GAUGE ...................... .120", MAXIMUM .150
215 TON GROTNES MODEL #15-HE-215-12 HYDRAULIC EXPANDER
$RFQ
215 TON GROTNES MODEL #15-HE-215-12 HYDRAULIC EXPANDER
Cone Angle = 6 NOMINAL DIAMETER ...................... 16" DIAMETRAL TRAVEL ...................... 1.47" JAW HEIGHT ............................ 5-1/4" NUMBER OF JAWS ........................ 12
BSC M-10/4 REBAR RIDGE ROLLER
$RFQ
BSC M-10/4 REBAR RIDGE ROLLER
EQUIPPED WITH: 2 HEADS - INDIVIDUALLY DRIVEN W/4 SCORING WHEELS ON EACH HEAD 2 HEADS - .75 KW 3/60/254-440 (1680/55 RPM) MOTOR WITH CONTROLS O.A. DIMENSIONS: 5'5" X 3'3" X 4'6" HIGH
7" WIDE 2-HI EDGING MILL
$RFQ
7" WIDE 2-HI EDGING MILL
7" WIDE 2-HI EDGING MILL CONFIGURATION - 2-HI MAX STRIP WIDTH - 7" THICKNESS RANGE - .020"-.125" EDGING PASSES - 3 LINE DIRECTION - L-R TOOLING FOR VARIOUS EDGING ROLLS SIZES LINE COMPONEN
18" - 4" (457-100mm) STRIP EDGING LINE
$RFQ
18" - 4" (457-100mm) STRIP EDGING LINE
SPECIFICATIONS: PURPOSE: TO FLATTEN AND CONTOUR EDGE STRIP WIDTH RANGE: 4" (100mm) MINIMUM 18" (447mm) MAXIMUM PAYOFF: MANUFACTURER: LITTELL MACHINE CO. TYPE: AUTOMATIC CENTERING REEL MODEL No.: 25
60mm X 6mm LIMONTA AND OTHER EDGING AND CUT-TO-LENGTH LINE FOR FLAT BARS
$RFQ
60mm X 6mm LIMONTA AND OTHER EDGING AND CUT-TO-LENGTH LINE FOR FLAT BARS
MANUFACTURER: LIMONTA AND OTHER YEAR : 2000 - 2004 MATERIAL : STAINLESS STEEL AISI 304 e 316 GENERAL SPECIFICATIONS: - DOUBLE UNCOILER (COIL DIAM. 2000mm) WITH PINCH-ROLL AND PEELING TABLE. - SHEAR
GAUER No. 6H20NC 20" THRU-FEED COIL STRIP EDGE DEBURRING MACHINE
$RFQ
GAUER No. 6H20NC 20" THRU-FEED COIL STRIP EDGE DEBURRING MACHINE
WIDTH RANGE ........................ 5/8" TO 20" THICKNESS RANGE .................... 20 GA (.0344") TO 11 GA (.125") MATERIAL: COLD OR HOT ROLLED STEEL, STAINLESS STEEL, ALUMINUM, COPPER, AND
GAUER No. 6H20NC 20" THRU-FEED COIL STRIP EDGE DEBURRING MACHINE
$RFQ
GAUER No. 6H20NC 20" THRU-FEED COIL STRIP EDGE DEBURRING MACHINE
WIDTH RANGE ................. 5/8" TO 20" THICKNESS RANGE ............. 20 GA. (.0344") TO 11 GA (.125") MATERIAL: COLD OR HOT ROLLED STEEL, STAINLESS STEEL, ALUMINUM, COPPER, AND BRASS SPEED
CARLTON #3A RADIAL DRILL, FLOOR TYPE
$RFQ
CARLTON #3A RADIAL DRILL, FLOOR TYPE
CAPACITY .................................. 3-1/2" ARM ....................................... 5' EST, O,A, DIMENSIONS ...................... 17' L X 8' W X 13' HI EST. WEIGHT ..............................
AMERICAN 4' x 13" RADIAL DRILL
$RFQ
AMERICAN 4' x 13" RADIAL DRILL
SPINDLE TRAVEL ........................ 18" SPINDLE SPEED ......................... (36) 12 - 1500 RPM HEAD TRAVEL ON ARM .................... 36" ARM TRAVEL ON COLUMN .................. 36" FEEDS (16)
12 SPINDLE NATCO MULTIPLE SPINDLE DRILL
$RFQ
12 SPINDLE NATCO MULTIPLE SPINDLE DRILL
20" x 34" I.D. Twelve Spindle Slip Plate 3" Centers Coolant 14' height
STANDARD #10-902 TOOL SECONDARY OPERATION DRILLING AND TAPPING MACHINE
$RFQ
STANDARD #10-902 TOOL SECONDARY OPERATION DRILLING AND TAPPING MACHINE
BRAss - ALUMINUM .......................... 1/2" - 20" FEED RATE FORWARD OR BACK (@ 80 PSI)....... 0 - 150 IPM FEED RATE FORWARD OR BACK ................. 0 - 3" SPINDLE SPEEDS WITH 1725 RPMS WEIGHT ..
DAVENPORT #10-901 SECONDARY OPERATION DRILLING AND TAPPING MACHINE
$RFQ
DAVENPORT #10-901 SECONDARY OPERATION DRILLING AND TAPPING MACHINE
THREE UNITS MOUNTED VERTICALLY TWO UNITS MOUNTED HORIZONTALLY ON EITHER SIDE OF INDEX TABLE. PNEUMATICALLY POWERED, HYDRAULICALLY CONTROLLED MECHANISM. EACH UNIT HAS A 3" STROKE. BRASS - ALUMINUM ............
ARO 1/4" AIR DRILL WITH L VENTS
$RFQ
ARO 1/4" AIR DRILL WITH L VENTS
ONE (1) VERTICAL DRILL ) )1/4" CAPACITY ONE (1) HORIZONTAL DRILL) EQUIPPED WITH DRILL L-VENTS MOUNTED ON TABLE WEIGHT................... 300 LBS. O.A.DIM. ................ 23-1/2" X 54-1/2"
100,000# AETNA STANDARD DRAWBENCH, SINGLE DRAW
$RFQ
100,000# AETNA STANDARD DRAWBENCH, SINGLE DRAW
capacity.................. 100,000 lbs. type...................... single chain, single draw main drive................ 250hp/885rpm ac carriage return........... 7.5hp 865rpm loading hoist............. 1hp 1
Categories:
Condition:
  • X Used (2219)
Manufacturer:
Location:
  • X New Jersey (2219)
Price:
  •  to 
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>