buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1601 - 1700 of 2219 matches
Sort by:
Items Per Page:  20 |  50 |  100
10"x20"x30" (256x508x762mm) WATERBURY 4HI TEMPER MILL
$RFQ
10"x20"x30" (256x508x762mm) WATERBURY 4HI TEMPER MILL
Year: 1979 Work Roll Driven Direction: Left to Right Material: Low/Medium/High Carbon Steel Coil Weight: 12Ton Coil OD/ID: 610mm x 1250mm (24" x 50") Max. Material Width: 650mm (26") Nominal Reducti
4" x 14" x 10" MORGAN 4-HIGH ROLLING MILL
$RFQ
4" x 14" x 10" MORGAN 4-HIGH ROLLING MILL
SPECIFICATIONS MANUFACTURER................ MORGAN CONSTRUCTION, WORCESTER, MA USA TYPE........................ 4 HI ROLLING MILL WORK ROLL DRIVEN WORK ROLLS:................. 4" X 10" (102mm X 254mm)
1 1/2" x 8" x 6" WATERBURY FARREL 4-HI ROLLING MILL
$RFQ
1 1/2" x 8" x 6" WATERBURY FARREL 4-HI ROLLING MILL
MANUFACTURER WATERBURY FARREL TYPE 4 HI 1 1/2" x 6" x 6" WORK ROLL DRIVEN EXISTING ROLLS -WORK ROLLS -DIAMETER 1 1/2" (38.1mm) -FACE WIDTH 6" (152.4mm) -BACK UP ROLLS -DIAMETER 6&#
5" x 8" FENN 2 HI/4 HI WIRE FLATTENING MILL W/MILL MTD REELS
$RFQ
5" x 8" FENN 2 HI/4 HI WIRE FLATTENING MILL W/MILL MTD REELS
SPECIFICATIONS -MANUFACTURER: FENN -MODEL: 051 -TYPE: 2 HI/ 4 HI WIRE FLATTENING MILL -MILL IS CURRENTLY SET UP AS A 2 HI MILL 4 HI ASSEMBLIES ARE NOT WITH
CARL WEZEL COMBINATION 2-HI/4-HI REVERSING COLD ROLLING MILL
$RFQ
CARL WEZEL COMBINATION 2-HI/4-HI REVERSING COLD ROLLING MILL
* * * N E W 1 9 7 8 * * * BUILT FOR DANISH MINT Roll Dimension 480 mm Diameter x 350 mm wide (2 HI) and 400 mm x 150mm x 350 mm wide (4 HI) This Mill functioned in three different ways: 1.
8" FENN 2/4 HI DESIGN ROLLING MILL
$RFQ
8" FENN 2/4 HI DESIGN ROLLING MILL
Manufacturer: Fenn Serial # 119 General Specifications: 5" Dia. Back Up Roll 1 1/2" Dia. Work Roll 8" Roll Face 39" Pass Line Manual Vertical Roll Adjustment Roll Bearings 10 HP AC
86" x 42" UNITED/I2S TEMPER PASS ROLLING MILL
$RFQ
86" x 42" UNITED/I2S TEMPER PASS ROLLING MILL
SPECIFICATIONS: COIL WEIGHT CAPACITY: 40ton GAUGE RANGE: .048 to .500 thick WIDTH: 72" ENTRY COIL ID: 24" to 36" EXIT COIL ID: 24" x 30" COIL OD: 80" SPEED: Max 1200 FPM
18" 2-HI United One-Way Temper Mill
$RFQ
18" 2-HI United One-Way Temper Mill
Entry Gauge - .022"-.250" Exit Gauge - .022"- .250" Coil Width - .375"-15.43" Coil Weight - 8500# Entry Coil ID - 16"-24" Entry Coil OD - 68" Exit Coil ID - 16" (20
18" x 28" 2-HI BLISS TEMPER MILL
$RFQ
18" x 28" 2-HI BLISS TEMPER MILL
Recently rebuilt, all new hydraulics and controls Max Strip Thickness - .250" Min Strip Thickness - .015" Max Strip Width - 24" (28" between the housings) Speed - 350 Ft/Min HP - Main mill 15
10" x 15-3/4" SCHMITZ MODEL #EA7-250/400 2-HI ROLLING MILL
$RFQ
10" x 15-3/4" SCHMITZ MODEL #EA7-250/400 2-HI ROLLING MILL
Roll size ............... 10" Diameter x 15-3/4" Face Water Cooled Manual Screwdown-Individual Dual Control Handwheels Strip width ............. 13-3/4" (350MM) - as taken from Mfg. tag EQUIPPED WIDT
SUNDWIG MODEL WV 20 R-100 20-ROLL CLUSTER MILL
$RFQ
SUNDWIG MODEL WV 20 R-100 20-ROLL CLUSTER MILL
N E W 1 9 5 7 Alligator Frame Design with external back-up rolls Work-rolls diameter 10 mm (.39") to 15 mm (.591") Back-up rolls diameter 99.9 mm (3.933") Length of barrel 100 mm (3.937"
WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL
$RFQ
WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL
WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL MFG - WATERBURY FARREL I2S ELECTRICAL UPGRADE IN 2000 MODEL - ZR33-13 MATERIAL - CARBON STEEL & STAINLESS STEEL THICKNESS RANGE - .187" - .010" LINE SPEE
WATERBURY FARREL ZR15 8-1/2 SENDZIMIR ROLLING MILL
$RFQ
WATERBURY FARREL ZR15 8-1/2 SENDZIMIR ROLLING MILL
Manufacturer Waterbury Farrel Co. Model ZR 15 - 8-1/2" Type Saddle Type 1-2-3 Roll Size .468" (11.88mm)
SENDZIMIR NO. ZR 33-18 ROLLING MILL
$RFQ
SENDZIMIR NO. ZR 33-18 ROLLING MILL
ELECTRICS Mill Motor: 500hp Reliance DC, 480V, 840 AMPS, Field 240V, 450/960rpm Winder Motor: 500hp Reliance DC 480V, 830 AMPS, Field 240V, 650/1160rpm Mill Speed: 425/900fpm Max. Speed at constant torque-variabl
25" (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC
$RFQ
25" (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC
SPECIFICATIONS: MANUFACTURER: WATERBURY FARREL FOUNDRY & MACHINE (USA) TYPE: 20-HI PRECISION COLD REVERSING ROLLING MILL WITH AGC (AUTOMATIC GAUGE CONTROL) MODEL
WATERBURY FARREL "SENDZIMIR" ZR16-8 1/2 ROLLING MILL
$RFQ
WATERBURY FARREL "SENDZIMIR" ZR16-8 1/2 ROLLING MILL
MANUFACTURER WATERBURY FARREL MODEL ZR-16-8 1/2 SADDLE TYPE TYPE 12-HI SENDZIMIR ROLLING MILL PREVIOUS USE -MATERIAL NICKEL ALLOYS (SUITABL
56" (1420mm) HOT STRIP MILL
$RFQ
56" (1420mm) HOT STRIP MILL
CAPACITY: 2,300,000 TONS (2,090,000 TONNES) FURNACES: FIVE CONTINUOUS 3-ZONE REHEATING FURNACES FIRED BY COKE OVEN GAS AND OIL FCE. NO. MANUFACTURER LITE-UP 1 RUST F
MELT SHOP FOR BAR PROCESSING
$RFQ
MELT SHOP FOR BAR PROCESSING
(1) 25TON E.A.F. U-Car design (1995) spray cooled sheel & roof 14" Electrodes - Hydraulic Masts ABB transformer - 18 MVA 12 ft. diameter shell 2 spares refractory roofs (1) A.O.D. VESSEL IRS (Intelligent Re
COMPLETE MELT, CAST AND BAR ROLLING MILL PLANT
$RFQ
COMPLETE MELT, CAST AND BAR ROLLING MILL PLANT
A) Each Electrical Arc Furnace Manufacturer:..........Kishida Japan Year of Make:...............1981 Production capacity:........... 275,000T/Y Type of pouring:............. Tilt (Inclined system) Diameter of the
POMINI LAYING HEAD AND PINCH ROLL ASSEMBLY
$RFQ
POMINI LAYING HEAD AND PINCH ROLL ASSEMBLY
POMINI LAYING HEAD AND PICH ROLL ASSEMBLY DESCRIPTION QUANTITY LAYING HEAD PIPES 78 EACH HORIZONTAL LAYING HEAD PIPE 1 EACH HORIZONTAL LAYING HEAD P
.625" - 2.375" BIRDSBORO ROD & BAR MILL, FOR TOOL STEEL PRODUCTION
$RFQ
.625" - 2.375" BIRDSBORO ROD & BAR MILL, FOR TOOL STEEL PRODUCTION
SPECIFICATIONS: CROSS COUNTRY DESIGN PRODUCTION STAINLESS 200/300 SERIES, 400/500 + 200/300 TOOL STEEL A2, D2, A13, H11 HIGH SPEED M1, M2 TYPE CPM 9V, 10V, M4, REX 20, T15 REX 76 BILLET SIZE SQUARE 3-1/4
13.77" DIA. (350 MM) MORGAN TEKISUN SIZING MILL
$RFQ
13.77" DIA. (350 MM) MORGAN TEKISUN SIZING MILL
MANUFACTURER: MORGAN/DAIDO AGE: 1990 QUANTITY: ONE MILL, THREE STANDS GENERAL SPECIFICATIONS: TYPE : 2 HORIZONTAL - 1 VERTICAL MOUNTED ON COMMON BASE 2 HIGH ON 26.4" CENTERS (670 MM)
60" x 50,000# UNITED REVERSING MILL REELS
$RFQ
60" x 50,000# UNITED REVERSING MILL REELS
COIL WEIGHT ....................... 25 TON MAX MATERIAL THICKNESS ................ .229" - .010" COIL I.D .......................... 20"/24"/30" COIL O.D .......................... 78"
10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
$RFQ
10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
RUBBER COVERED ROLLS ON DRIVEN AND IDLER STANDS. CENTER TO CENTER WHEEL DISTANCES - 39" TO 68-1/2" WHEEL SIZE - (3) 12" DIAMETER X 4" WIDE ROLLS (OVERALL WIDTH - 13") CAPACITY ..........
12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
$RFQ
12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
3 MOTOR MACHINE INITIAL PINCH TYPE MANUFACTURER ......... WEBB MODEL # .............. 24L MAX CAPACITY ......... 1-1/2" X 12'
1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
$RFQ
1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
SPECIFICATIONS: 1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL RATED BENDING CAPACITY 1-3/8" X 10' CAPACITY (ROLLING OVER 120" DIAMETER) . 1-5/8" X 10' PRE-BENDING
4' x 3" LOWN MODEL #B-300 BENDING ROLL
$RFQ
4' x 3" LOWN MODEL #B-300 BENDING ROLL
ROLLS ................... 4' LONG x 3" DIAMETER MAXIMUM CAPACITY ........ 16-18 GAUGE EQUIPPED WITH: MANUAL DROP END FOOT PEDAL ACTIVATION MOTOR DATA: 1 HP, 208-220/440V, 3PH, 60CYC, 1735 RPM WITH CONTROL
MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
$RFQ
MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
Diameter of Forging Dies 6" Width of Roll Dies 6" Press set up to receive flat back segmental dies Equipped with: Roll Shaft Extensions for operation Die Mounting of Overhanging Rolls Air Clutch
AJAX MODEL #6 FORGING ROLL
$RFQ
AJAX MODEL #6 FORGING ROLL
Width of Roll dies ................................. 60" Maximum roll die dia. .............................. 44" Maximum Length rolled section ...................... 82" Weight, approx. ...............
BUFFALO #1 HORZONTAL BENDING ROLLS
$RFQ
BUFFALO #1 HORZONTAL BENDING ROLLS
MANUAL HEIGHT ADJUSTMENT OF UPPER ROLL MANUAL VERTICAL & LATERAL ADJUSTMENT OF GUIDE ROLLS FOUR SET OF ANGLE ROLLS MISCELANEOUS SPACE PLATES FOUR SET OD RADIOUS ROLLS 10 HP MOTOR, WIRED 3 PHASE, 60 CYCLE, 220 VOLTS
DAHLSTROM UNCOILER
$RFQ
DAHLSTROM UNCOILER
UNCOILER MODEL# 20H-48-15OL CAPACITY .......20,000# COIL WIDTH .....48" HYDRAULIC EXPANSION...... 15.5" - 20.5" HYDRAULIC DRIVE OD ............... 68" AIRFLEX BELLOWS TYPE DRAG BRAKE CONDI
32 STAND x 4.5", TISHKEN #32-XHW-4 ROLLFORMER
$RFQ
32 STAND x 4.5", TISHKEN #32-XHW-4 ROLLFORMER
MODEL ....................... 32-XHW-4 YEAR ........................ 1997 NUMBER OF STANDS ............ 32 SPINDLE DIAMETER ............ 4 1/2'' ROLL SPACE .................. 70" HORIZONTAL CENTERS ......
19 STAND ARDCOR TOOLED DECKING LINE 42"RS, 2.25"ARBOR
$RFQ
19 STAND ARDCOR TOOLED DECKING LINE 42"RS, 2.25"ARBOR
19 STAND ARDCOR TOOLED DECKING LINE, 42" RS, 2.25" ARBOR CONSISTING OF: L-TYPE COIL CAR 48" X 20,000# UNCOILER 16"-20" ID HYDRAULIC WEDGE EXPANSION & OVERARM ARDCOR ROLL FORMER
18 STAND X 1-1/2" X 12" B & K /MV ROLLFORM LINE
$RFQ
18 STAND X 1-1/2" X 12" B & K /MV ROLLFORM LINE
ROLLFORMER: Number of Stands: 18 Line Direction: Right to Left Spindle Diameter: 1-1/2" (38.1mm) Roll Space: 12" (304.8mm) Horizo
16 STAND BONAK ROLL FORMER
$RFQ
16 STAND BONAK ROLL FORMER
ROLL SPACE ......... 1250mm MINIMUM THICKNESS .. 0.5mm PROFILES 40 MINI WAVE (P19), BIG WAVE (P40), (P54, PELFOR (54 WITH FITTING), 31 GALVANIZED AND PRETREATED SHEET MANDRIL UNCOILER WITH HYDRAULIC EXPANSION MO
15 STAND X 1-1/4" X 11" B & K /MV ROLLFORMING LINE
$RFQ
15 STAND X 1-1/4" X 11" B & K /MV ROLLFORMING LINE
SPECIFICATIONS: Number of Stands: 15 Line Direction: Right to Left Spindle Diameter: 1-1/4" Roll Space: 11" Horizontal Center: 12" Vertical Adjustment: 3-1/2" - 5
12 STAND X 1-1/2" X 12" B & K ROLLFORM LINE
$RFQ
12 STAND X 1-1/2" X 12" B & K ROLLFORM LINE
ROLLFORMER: Number of Stands: 12 Line Direction: Right to Left Spindle Diameter: 1-1/2" (38.1mm) Roll Space: 12" (304mm) Horizont
11 STAND, DAHLSTROM MODEL #400-10 ROLL FORMER
$RFQ
11 STAND, DAHLSTROM MODEL #400-10 ROLL FORMER
SPECIFICATIONS: 11 STAND 1.5" ARBOR DIAMETER 8" ROLL SPACE 13" HORIZONTAL DISTANCE CENTER TO CENTER 4" - 7" VERTICAL CENTERS INBOARD ROLL FORMER FLOW RIGHT TO LEFT MOTOR DRIVE: 15HP
10 STAND, YODER MODEL #M-1-1/2 ROLL FORMER
$RFQ
10 STAND, YODER MODEL #M-1-1/2 ROLL FORMER
SPECIFICATIONS: 1-1/2" ARBOR DIAMETER, 10 STANDS 7" ROLL SPACE 11" DISTANCE HORIZONTAL CENTER TO CENTER INBOARD ROLL FORMER FLOW - RIGHT TO LEFT MOTOR DRIVE: 15 HP, 220/440V, 3PH, 60 CYC, 1800 RP
10 STAND DAHLSTROM MODEL #400-10 ROLLFORMER, 2" ARBORS
$RFQ
10 STAND DAHLSTROM MODEL #400-10 ROLLFORMER, 2" ARBORS
10 STAND ROLLFORMER ARBOR DIAMETER ................... 2" VERTICAL CENTERS ................. 4" TO 7" ROLL SPACE........................ 28" HORIZONTAL SPACING ............... 13"
10 STAND X 1-1/4" X 10" B & K ROLLFORMING LINE
$RFQ
10 STAND X 1-1/4" X 10" B & K ROLLFORMING LINE
SPECIFICATIONS: Number of Stands: 10 Line Direction: Right to Left Roll Space: 10" Horizontal Centers: 12" Vertical Adjustment: 4" - 5" Base to Center Lower Spindle: 4
8 STAND X 2-1/2" X 16" YODER M2-1/2 ROLLFORMING LINE
$RFQ
8 STAND X 2-1/2" X 16" YODER M2-1/2 ROLLFORMING LINE
ROLLFORMER: Number of Stands: 8 Line Direction: Right to Left Spindle Diameter: 2-1/2" (63.5mm) Roll Space: 16" (406mm) Horizonta
300 LB., LITTELL #1 BALL BEARING PAYOFF
$RFQ
300 LB., LITTELL #1 BALL BEARING PAYOFF
LITTELL Mdl. #1 Ball Bearing Capacity --- 300 lb. Min. ID --- 8" Max OD --- 28" Max Coil Width With Keepers --- 8" Tilt Range --- 90 deg. NON - POWERED O.A. Dimns. --- 30' dia. x 28�
14" LITTELL AUTOMATIC CENTERING REEL
$RFQ
14" LITTELL AUTOMATIC CENTERING REEL
MANDREL EXPANSION ........................ 13-1/2" TO 20" MAX. DIA. BACK PLATE ................................ 60" DIAMETER O.A. DIMENSIONS ......(LR X FB X HIGH)..... 5' X 5' X 6' EQUIPPED WITH:
300# TME-WESTERN AUTO CENTERING REEL
$RFQ
300# TME-WESTERN AUTO CENTERING REEL
SPECIFICATIONS: CAPACITY .............. 300# COIL ID ............... 8" - 2" MAX COIL OD ........... 48" COIL WIDTH ............ 8-1/2" MAX EQUIPPED WITH: NO KEEPERS SCREW TYPE ARM EXPANS
4000#, LITTELL MODEL #40-18 AUTOMATIC CENTERING REEL
$RFQ
4000#, LITTELL MODEL #40-18 AUTOMATIC CENTERING REEL
MANUFACTURED 1979 MAXIMUM CAPACITY ...................... 4000 LBS. MAXIMUM COIL OUTSIDE DIAMETER ......... 60" INSIDE DIAMETER RANGE ................. 12" - 14" ARMS HAVE ADAPTER PLATES WHICH INCR
4000#, LITTELL MODEL #40-18 AUTOMATIC CENTERING REEL
$RFQ
4000#, LITTELL MODEL #40-18 AUTOMATIC CENTERING REEL
MANUFACTURED 1980 MAXIMUM CAPACITY ................... 4000 LBS. MAXIMUM COIL OUTSIDE DIAMETER ...... 69" INSIDE DIAMETER RANGE .............. 15" - 20" ARMS HAVE ADAPTERS BOLTED WHICH INCREASE MINI
2000# LITTELL MODEL #20-12 AUTOMATIC CENTERING REEL
$RFQ
2000# LITTELL MODEL #20-12 AUTOMATIC CENTERING REEL
MAXIMUM COIL WEIGHT ............ 2,000 LBS. MAXIMUM WIDTH .................. 12" I.D. RANGE ..................... 16" - 20" MAXIMUM O.D. ................... 48" ELECTRIC BRAKE HAND CRANK I.D. A
20" X 20,000# UNCOIL / RECOIL LINE
$RFQ
20" X 20,000# UNCOIL / RECOIL LINE
Weight Capacity: 20,000lbs Width: 20" Complete line with the Following Components: Mandrel Uncoiler Maximum Weight: 20,000lbs Mandrel Face : 20" Mandrel ID: 16" to 20" Coil OD: 66" Sl
48" X 20,000# PAXSON RECOILER
$RFQ
48" X 20,000# PAXSON RECOILER
NEW 1963 MANUFACTURER: PAXSON MACHINE CO. CAPACITY: 20,000 LBS. MAX. COIL WEIGHT TYPE: EXPANDING MANDREL TYPE OF EXPANSION: HYDRAULIC MANDREL SIZE: MANDREL O.D.: 19-1/2" - 20-1/2" WIDTH: 52
15 TON, UNIPRESS MODEL #1020 GAP FRAME HYDRAULIC PUNCH
$RFQ
15 TON, UNIPRESS MODEL #1020 GAP FRAME HYDRAULIC PUNCH
CAPACITY .......................... 15 TONS CAPACITY HOLE THRU METAL .......... 3-1/2" DIAMETER THRU 1/16"
BUFFALO MODEL #1/2 48 SINGLE END PUNCH
$RFQ
BUFFALO MODEL #1/2 48 SINGLE END PUNCH
DEPTH OF THROAT ..................... 48-1/2" PUNCH STANDARD TOOLS ................ 1-1/16" DIA. X 5/8" THICK 1-13/16"DIA X 3/4" THICK ANGLES .............................. 3" X 5/16
SCOTCHMAN 40 TON PUNCH AND SHEAR, MODEL #4014C
$RFQ
SCOTCHMAN 40 TON PUNCH AND SHEAR, MODEL #4014C
CAPACITY ................. 3/4" CARRIAGE TRAVEL .......... 10" HYD SYSTEM PRESSURE ...... 1450 EQUIPPED WITH: TWIN SPINDLE TYPE LANCO HEADS START/STOP BUTTONS 3 HP 3 PHASE 230 VOLT 8.4 AMP M
VICON ELITE 8' X 20' HYPER MAX 200 DUAL HIGH AIR USCRIBE UNIT
$RFQ
VICON ELITE 8' X 20' HYPER MAX 200 DUAL HIGH AIR USCRIBE UNIT
SPECIFICATIONS: MAXIMUM CUTTING WIDTH 96" MAXIMUN CUTTING LENGTH 240" TABLE SIZE 96" X 240" MAXIMUM PLASMA POWER OUTPUT 200 AMP MAXIMUM TRAVERSE SPEEDS 2000 IPM EQUIPPED WITH: V
30 TON, STRIPPIT MODEL SUPER 30/30 PUNCH
$RFQ
30 TON, STRIPPIT MODEL SUPER 30/30 PUNCH
Tonnage 30 Capacity: Range 0.03"-3 1/2" Hole Size 3 1/2" x 12 GA Mat. Hole Size 1" x 1/4" Mat. Sheet Size 30" x 42" Throat Depth 30" Shut Height 5 15/32" Stroke
BLISS B-4A DOUBLE ACTION TOGGLE PRESS
$RFQ
BLISS B-4A DOUBLE ACTION TOGGLE PRESS
PLUNGER TONNAGE ......................... 170 TONS BLANKHOLDER TONNAGE ..................... 115 TONS BED AREA .........(LR X FB).............. 32" x 34" WIDTH BETWEEN UPRIGHTS,.................. 32" O
122/90 TON BLISS MODEL #3-1/2B TOGGLE DOUBLE ACTION PRESS
$RFQ
122/90 TON BLISS MODEL #3-1/2B TOGGLE DOUBLE ACTION PRESS
STROKE OF PLUNGER ......................... 15-1/2" STROKE OF BLANKHOLDER ..................... 10" SHUTHEIGHT OF PLUNGER ..................... 28" SHUTHEIGHT OF BLANKHOLDER ................. 26"
145 / 98 TON BLISS M#3-3/4B DOUBLE ACTION TOGGLE PRESS
$RFQ
145 / 98 TON BLISS M#3-3/4B DOUBLE ACTION TOGGLE PRESS
TONNAGE CAPACITY PLUNGER ................... 145 TONS BLANKHOLDER ................................ 90 TONS STROKE OF PLUNGER .......................... 22" STROKE OF BLANKHOLDER ...................... 15" S
145Ton BLISS #3-3/4B DOUBLE ACTION TOGGLE PRESS
$RFQ
145Ton BLISS #3-3/4B DOUBLE ACTION TOGGLE PRESS
TONNAGE CAPACITY PLUNGER ................... 145 TONS BLANKHOLDER ................................ 90 TONS STROKE OF PLUNGER .......................... 22" STROKE OF BLANKHOLDER ...................... 15" S
145/98 TON BLISS MODEL #3-3/4B STRAIGHT SIDE SINGLE CRANK TOGGLE DRAWING PRESS
$RFQ
145/98 TON BLISS MODEL #3-3/4B STRAIGHT SIDE SINGLE CRANK TOGGLE DRAWING PRESS
N E W 1 9 4 8 RATED CAPACITIES: BLANKHOLDER PLUNGER TONNAGE................................ 145 98 STROKE................................. 15" 22&#
122/90 TON BLISS MODEL #3-1/2 C DOUBLE ACTION TOGGLE PRESS
$RFQ
122/90 TON BLISS MODEL #3-1/2 C DOUBLE ACTION TOGGLE PRESS
BLANKHOLDER CAPACITY............................... 90 TONS STROKE ......................................... 11-1/2 SHUTHEIGHT (ON BED ADJUSTMENT UP)............... 24" SHUTHEIGHT (ON BED ADJUSTMENT DOWN)........
120/80 TON BLISS #3-1/2C STRAIGHT SIDE SINGLE CRANK TOGGLE PRESS
$RFQ
120/80 TON BLISS #3-1/2C STRAIGHT SIDE SINGLE CRANK TOGGLE PRESS
RATED CAPACITIES: PLUNGER BLANKHOLDER TONS.................................. 120 80 STROKE................................ 20" 9" DIE SPACE...............
120/80 TONS BLISS #3-1/2C SINGLE CRANK DOUBLE ACTION TOGGLE PRESS
$RFQ
120/80 TONS BLISS #3-1/2C SINGLE CRANK DOUBLE ACTION TOGGLE PRESS
MANUFACTURED 1970 CAPACITY PLUNGER .......................... 120 TONS CAPACITY BLANKHOLDER ...................... 80 TONS STROKE OF PLUNGER ......................... 20" STROKE OF BLANKHOLDER ................
90/122 BLISS MODEL #3-1/2C STRAIGHT SIDE DOUBLE ACTION TOGGLE PRESS
$RFQ
90/122 BLISS MODEL #3-1/2C STRAIGHT SIDE DOUBLE ACTION TOGGLE PRESS
N E W 1 9 7 5 BLANKHOLDER PLUNGER RATED CAPACITY (TONS) ..................... 90 122 STROKE OF SLIDE ........................... 11-1/2" 20" SHU
90/122 BLISS MODEL #3-1/2C STRAIGHT SIDE DOUBLE ACTION TOGGLE PRESS
$RFQ
90/122 BLISS MODEL #3-1/2C STRAIGHT SIDE DOUBLE ACTION TOGGLE PRESS
N E W 1 9 7 5 BLANKHOLDER PLUNGER RATED CAPACITY (TONS) ..................... 90 122 STROKE OF SLIDE ........................... 11-1/2" 20" SHU
52/35 TON BLISS #1-1/2B STRAIGHT SIDE TOGGLE PRESS
$RFQ
52/35 TON BLISS #1-1/2B STRAIGHT SIDE TOGGLE PRESS
RATED CAPACITIES: PLUNGER BLANKHOLDER TONNAGE................................ 52 35 STROKE................................. 10-1/2" 6-1/2" ADJUSTMENT............................. 4�
52/35 TON BLISS MODEL #1-1/2B DOUBLE ACTION TOGGLE PRESS
$RFQ
52/35 TON BLISS MODEL #1-1/2B DOUBLE ACTION TOGGLE PRESS
STROKE OF SLIDE ........................ 8" BED AREA ............(L-R X F-B)........ 20-1/4" X 21-1/4" RAM AREA ............(L-R X F-B)........ 15" X 13" DISTANCE BETWEEN UPRIGHTS ....
190 TON MINSTER #40T-7 STRAIGHT SIDE SINGLE CRANK TRIM PRESS
$RFQ
190 TON MINSTER #40T-7 STRAIGHT SIDE SINGLE CRANK TRIM PRESS
Rated capacity (tons).................. 190 Bed area (l-r) x (f-b)................. 48" x 32" Ram area (l-r) x (f-b)................. 40" x 26-1/2" Bolster area (l-r) x (f-b) x (high).... 32"
FEDERAL #5 TRIM PRESS
$RFQ
FEDERAL #5 TRIM PRESS
CAPACITY .................... 49 TONS BED AREA .....(LR X FB)...... 30" X 19" RAM AREA .....(LR X FB)...... 9" X 9" STROKE ...................... 4" SHUTHEIGHT .................. 12-1/4"
FEDERAL #5 TRIM PRESS
$RFQ
FEDERAL #5 TRIM PRESS
CAPACITY .................... 49 TONS BED AREA .....(LR X FB)...... 30" X 19" RAM AREA .....(LR X FB)...... 9" X 9" STROKE ...................... 4" SHUTHEIGHT .................. 12-1/4"
175 Ton, CLEARING R-175-72 STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
175 Ton, CLEARING R-175-72 STRAIGHT SIDE SINGLE CRANK PRESS
12" Stroke 26 Shut height 6" Slide adjustment 72" x 44" Bed area E
165 TON WILLIAMS & WHITE MODEL #7-OT-32 TRIM PRESS
$RFQ
165 TON WILLIAMS & WHITE MODEL #7-OT-32 TRIM PRESS
RATED CAPACITY ................................ 165 TONS STROKE ........................................ 6" - 8" SHUTHEIGHT .................................... 18" BED AREA ............(L-R) X (F-B)...
150 TON NIAGARA MODEL #SC1-150-33-42 STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
150 TON NIAGARA MODEL #SC1-150-33-42 STRAIGHT SIDE SINGLE CRANK PRESS
Rated capacity (tons)................... 150 Stroke of slide......................... 12" Shutheight.............................. 37" Adjustment.............................. 8" Strokes per minute....
100 TON, MINSTER MODEL #S1-100 SSSC PRESS
$RFQ
100 TON, MINSTER MODEL #S1-100 SSSC PRESS
SPECIFICATIONS: AGE: 1965 CAPACITY ................. 100 TON STROKE ................... 7" SHUT HEIGHT .............. 19.5" BED AREA ................. 21" LR x 24" FB RAM AREA ..............
150 TON HTC MODEL 152MS PRESS
$RFQ
150 TON HTC MODEL 152MS PRESS
Specifications: Tonnage Forming: 150 ton Tonnage Punching: 100 ton Bed Size: 48 in. x 144 in. Stroke: 7 in. Die Height Open: 14 in. Die Height Closed: 7 in. Window Opening: 24 in. Inside Width: 149 1/2 in. Ou
1500 Ton DANLY #SS2-1500-132 X 84 STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
1500 Ton DANLY #SS2-1500-132 X 84 STRAIGHT SIDE DOUBLE CRANK PRESS
PRESS DESIGNATION: "B" TONS ............. 1500 STROKE ............ 12" ADJUSTMENT ........ 10" MOTORIZED SHUT HEIGHT ....... 40" CONTIN ............ 15-40 SPM SINGLE ............ 12 - 2
800 TON LOIRE FOUR STANDS HYDRAULIC DRAWING PRESS, 2003 AS NEW CONDITION
$RFQ
800 TON LOIRE FOUR STANDS HYDRAULIC DRAWING PRESS, 2003 AS NEW CONDITION
LOIRE" TYPE: EDIMC-800-300-100/49-25/25-20, SERIAL N 15431 YEAR OF MANUFACTURING: 2003 IN "AS NEW" CONDITION" TECHNICAL DATA: PRESURE POWER......................................................
113 TON MINSTER MODEL #50-5-1/2-48 STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
113 TON MINSTER MODEL #50-5-1/2-48 STRAIGHT SIDE DOUBLE CRANK PRESS
Rated capacity (tons) ................... 113 Stroke of Slide ......................... 11" Adjustment .............................. 10" Bed Area ........(L-R x F-B) ............ 48" x 35" Ram Ar
100 TON NIAGARA #67-1/2C-4-1/2-S2-105-48-30 STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
100 TON NIAGARA #67-1/2C-4-1/2-S2-105-48-30 STRAIGHT SIDE DOUBLE CRANK PRESS
RATED CAPACITY (TONS) ............... 100 STROKE .............................. 9" BED (L-R) x (F-B) ................... 48" x 30" SHUTHEIGHT .......................... 19" ADJUSTMENT ............
80 TON ROUSSELLE MODEL #8SS-30-80 STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
80 TON ROUSSELLE MODEL #8SS-30-80 STRAIGHT SIDE DOUBLE CRANK PRESS
Rated capacity (tons) ................ 80 Bed area (l-r) x (f-b) ............... 78-1/4" x 30" Ram area (l-r) x (f-b) ............... 78-1/4" x 20" Stroke ............................... 3" S
75 TON WARCO MODEL #75-2-72C STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
75 TON WARCO MODEL #75-2-72C STRAIGHT SIDE DOUBLE CRANK PRESS
RATED CAPACITY .....(TONS)................. 75 STROKE .................................... 8" SHUTHEIGHT ................................ 19" BED AREA ...........(L-R x F-B)............ 72" x 26 RAM AR
75 TON WARCO MODEL #S2-75-96-26 STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
75 TON WARCO MODEL #S2-75-96-26 STRAIGHT SIDE DOUBLE CRANK PRESS
SPECIFICATIONS: STROKE ............................. 8" ADJUSTMENT ......................... 6" SHUTHEIGHT ......................... 22" BED SIZE (L-R x F-B) ............... 96" x 26" RAM
75 TON, WARCO #75-2-96C STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
75 TON, WARCO #75-2-96C STRAIGHT SIDE DOUBLE CRANK PRESS
RATED CAPACITY (TONS) ................. 75 STROKE OF SLIDE ....................... 8" SHUTHEIGHT ............................ 18" STROKES PER MINUTE .................... 45 ADJUSTMENT ......................
60 TON WARCO #65-2-60C STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
60 TON WARCO #65-2-60C STRAIGHT SIDE DOUBLE CRANK PRESS
Rated capacity (Tons) ......................... 65 Stroke of Slide ............................... 6" Shutheight (SDAU) ............................. 20" Bed size ...................................... 60�
3000 TON DANLY F4 STRAIGHT SIDE, 4 POINT STAMPING PRESS
$RFQ
3000 TON DANLY F4 STRAIGHT SIDE, 4 POINT STAMPING PRESS
4 POINT CONSTRUCTION BED AREA .......... 120" (LR) X 96" (FB) RATED TONNAGE ..... 3000 TON ABOVE BOTTOM ................. 1/2" STROKE........................ 12" SPM ..........................
50 TON DAKE 4-POST HYDRAULIC GUIDED PLATEN DIE SPOTTING PRESS
$RFQ
50 TON DAKE 4-POST HYDRAULIC GUIDED PLATEN DIE SPOTTING PRESS
Rated capacity (tons) .................. 50 Stroke of slide ........................ 48" Shutheight ............................. 19" Opening height ......................... 67" Ram cylinder diameter.
250 TON NOMINAL FORCE WEINGARTEN MODEL #PS125 SCREW PRESS
$RFQ
250 TON NOMINAL FORCE WEINGARTEN MODEL #PS125 SCREW PRESS
Nominal Force .............................. 160 Mp Permanently Permissible Load ............... 250 Mp Hard Blow Force ............................ 320 Mp Diameter of Screw .......................... 125mm Stroke
WATERBURY-FARREL 7-STATION HORIZONTAL TYPE REDRAW PRESS
$RFQ
WATERBURY-FARREL 7-STATION HORIZONTAL TYPE REDRAW PRESS
4-1/4" CENTER DISTANCE BETWEEN STATIONS 2-1/2" MAXIMUM CUP DIAMETER 14" STROKE 5.090" MAXIMUM LENGTH OF CLIPPED SHELL 50 STROKES PER MINUTE AIR CLUTCH MOTOR & CONTROLS
V & O OBI/SC PRESS
$RFQ
V & O OBI/SC PRESS
====================================
ROUSELLE A OBI PRESS
$RFQ
ROUSELLE A OBI PRESS
====================================
ROUSELLE 1A OBI PRESS
$RFQ
ROUSELLE 1A OBI PRESS
====================================
PERKINS 2A GF PRESSS
$RFQ
PERKINS 2A GF PRESSS
====================================
110 TON CLEARING OPEN BACK INCLINABLE PRESS
$RFQ
110 TON CLEARING OPEN BACK INCLINABLE PRESS
Rated Capacity ...(tons).................... 110 TONS Bed Area .........(l-r x f-b)............... 39" x 30" Ram Area .........(l-r x f-b)............... 28-1/4" x 21-1/8" Throat ..................
75 TON NIAGARA #ES75 OPEN BACK INCLINABLE PRESS
$RFQ
75 TON NIAGARA #ES75 OPEN BACK INCLINABLE PRESS
Rated capacity (tons) ...................... 75 Stroke of slide ............................ 8" Shutheight ................................. 21" Strokes per minute ......................... 90 Adjustment ..
70 TON FEDERAL MODEL #6 OPEN BACK INCLINABLE SINGLE CRANK PRESS
$RFQ
70 TON FEDERAL MODEL #6 OPEN BACK INCLINABLE SINGLE CRANK PRESS
RATED CAPACITY ......(TONS)...................... 70 STROKE OF SLIDE ................................. 1-1/2" ADJUSTMENT ...................................... 3" THROAT .....................................
60 TON ROUSSELLE MODEL #6A OBI/SC PRESS
$RFQ
60 TON ROUSSELLE MODEL #6A OBI/SC PRESS
CAPACITY ......................... 60 TON STROKE ........................... 5" SHUT HEIGHT ...................... 16-1/2" ADJUSTMENT ....................... 3-1/2" THROAT ...........................
60 TON JOHNSON MODEL #MP60FW OPEN BACK INCLINABLE SINGLE CRANK PRESS
$RFQ
60 TON JOHNSON MODEL #MP60FW OPEN BACK INCLINABLE SINGLE CRANK PRESS
Rated Capacity ......(tons).............. 60 Stroke of Slide ......................... 4" Shutheight .............................. 12-1/2" Adjustment .............................. 3-1/2" Bed Area
60 TON, BLISS MODEL #C-60, OBI PUNCH PRESS
$RFQ
60 TON, BLISS MODEL #C-60, OBI PUNCH PRESS
YEAR: 1978 SPECIFICATIONS: CAPACITY ................... 60 TON STROKE ..................... 3" ADJUSTMENT ..... ........... 4" SHUT HEIGHT ................ 14-1/4" THROAT ..................... 10
60 TON BLISS MODEL #C-60 OPEN BACK INCLINABLE SINGLE CRANK PRESS
$RFQ
60 TON BLISS MODEL #C-60 OPEN BACK INCLINABLE SINGLE CRANK PRESS
Rated Capacity ......(tons)................. 60 Stroke ..................................... 2" Adjustment ................................. 3" Shutheight ................................. 16-1/4" Thro
45 TON MINSTER MODEL #5 OBI/SC FLYWHEEL PRESS
$RFQ
45 TON MINSTER MODEL #5 OBI/SC FLYWHEEL PRESS
CAPACITY ................... 45 TONS STROKE ..................... 2" THROAT ..................... 7-1/2" BED AREA .. (L-R x F-B) .... 28" x 19" RAM AREA .. (L-R x F-B) .... 18" x 10" BO
Categories:
Condition:
  • X Used (2219)
Manufacturer:
Location:
  • X New Jersey (2219)
Price:
  •  to 
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>