buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1101 - 1200 of 2219 matches
Sort by:
Items Per Page:  20 |  50 |  100
Sunnen Horizontal Hone
$2,650
Sunnen Horizontal Hone
Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
Sunnen Horizontal Hone
$1,750
Sunnen Horizontal Hone
Machine Specs: Length 16" Range .060 - 6.5" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base Very Good Condition Inspect Under Power in Our Branchbur
Duap Ag Ball Roller Tool and Cutter Grinder
$2,750
Duap Ag Ball Roller Tool and Cutter Grinder
Machine Specs: Table Table Size 4" x 25-3/4" Travel 14-1/2" Swivels Right and Left Cross Travel 6" Wheel Head Swivels 90 Degr
Rush Drill Grinder Model 258
$3,950
Rush Drill Grinder Model 258
Drill Capacity.......................................................................3/32" to 3" Maximum Drill Length...................................................................16" Has the ability
KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
$8,950
KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
Machine Specs: Swing over table: 12-1/4" Distance between tailstocks: 32" Table working surface: 5-1/4" x 37-1/4" Longitudinal table travel: 20" Table travel per rev. of handwheel: 9/16"
6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
$1,750
6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
Machine Specs: Grinding Pocket 6" x 14" Spindle to Table 15" Grinding Wheel 8" HP 1.5 HP 220 Volt 3 Phase Graduations Cross .001 D
6” x 12” Boyar Schultz Hand Feed Surface Grinder
$1,750
6” x 12” Boyar Schultz Hand Feed Surface Grinder
Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic C
6” x 12” Harig Hand Feed Surface Grinder
$2,750
6” x 12” Harig Hand Feed Surface Grinder
Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1.5 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic
5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder.
$1,250
5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder.
Grinding Pocket 5" x 12" Table To Spindle Center 12" 7" x 1/2" x 1-1/4" Grinding Wheel Equipped With" 6" x 12" Walker Chuck Model no 54 Torit Dust Collector - 1/4 HP
6" x 18" Okamoto Hand Feed Surface Grinder
$2,450
6" x 18" Okamoto Hand Feed Surface Grinder
Machine Specs: Table Size 6" x 20" Travels Long 18" Cross 7" Vertical 12" Down Feed .0004" Coarse and .0001 Fine Motor
6” x 12” KO Lee Hydraulic Feed Surface Grinder
$1,650
6” x 12” KO Lee Hydraulic Feed Surface Grinder
Grinding Pocket 6” x 12” x 16” Travels Long 14” Cross 7” Table top to Spindle Center 16” Main Motor 1HP 220 Volt 3 Phase Wheel Size 8” x 3/4” x 1-1/4” Weight 1200 LBS Approx Equipped With: 1 Axis Longitudinal Hyd
10” x 36” Landis Universal Cylindrical Grinder
$17,500
10” x 36” Landis Universal Cylindrical Grinder
Machine Specs: Swing 10” Centers 36” Table Swivels 16 Degrees Wheel Head Wheel Size 12” x 1” x 5” Swivel Upper 180 Degrees Lower 60 Degrees Clockwise 60 Degrees Counter Clockwise RPM 2005 and 2533 RPM Auto Infe
16 GA x 36" Niagara Initial Pinch Power Bending Roll
$2,950
16 GA x 36" Niagara Initial Pinch Power Bending Roll
16 Ga Capacity Mild Steel 36" Roll Length 3" Diameter Rolls Manual Adjustment Manual Drop End Forward/Reverse Runs Well Inspect Under Power in Our Branchburg NJ Warehouse
48” x 14 Gauge Chicago Dries & Krump Finger Brake
$2,950
48” x 14 Gauge Chicago Dries & Krump Finger Brake
Description Bending Width 48” Capacity in Mild Steel 14 gauge Stainless 18 Gauge (5) 5” Fingers (2) 4” Fingers (5) 3” Fingers Inspect in our Lebanon NJ warehouse Please Note some Fingers have been altered but our
Updated Excello Ram type EDM
$2,950
Updated Excello Ram type EDM
Updated Excello Ram type EDM, With 50 Amp Elox Centra Solid State Power Supply Travels Long 24” Cross 12” Ram 5” Knee 16” Equipped With: 50 Amp Elox Centa 75 Amp Solid State Power Supply Type B50 S, S/N 000161
15 KVA Electro Arc Tap Disintegrator, Model 25A, S/N 9984
$2,950
15 KVA Electro Arc Tap Disintegrator, Model 25A, S/N 9984
Capacity #2 - 1-1/4” Table Size 18” x 26” Head to Table Max. 30” Head Travel 9” Arm Cross Travel 24” Voltage 550 Volt Single Phase Head - Model LBH Excellent Condition Please note Voltage - You may need a transf
4'6" x 12" Mas, Model VR 4, Radial Drill
$6,950
4'6" x 12" Mas, Model VR 4, Radial Drill
Machine Specs: Column Diameter 12" Arm Length 4' 6" Head Travel 36" Arm Travel (Up & Down) 26" Spindle Taper #4 MT Spin
4' x 13" American Radial Drill, Model Hole Wizard
$7,950
4' x 13" American Radial Drill, Model Hole Wizard
Machine Specs: Column Diameter 13" Arm Length 4' Face of Column to spindle Center 4
25” Doall Geared Head Drill with Power Down Feed
$2,950
25” Doall Geared Head Drill with Power Down Feed
Machine Specs: Column Diameter 5” Column to Spindle Center 12-1/2” Table Size 17” x 21” Spindle Speeds (8) 85 - 1460 RPM Spindle HP 1.0/1.2 2 HP / 2 Speed 440 Volt 3 Phase Spindle Taper 3 MT Feeds .015, .010, .007
18" x 12" x 16" Kitamura Vertical Machining Center
$14,500
18" x 12" x 16" Kitamura Vertical Machining Center
18" x 12" x 16" Kitamura Vertical Machining Center, With Fanuc OM CNC Control Model Mycenter 1 , S/N 01781, New 1987 Machine Specs: Travels X 18" Y 1
40 Ton 72" Bed Wysong H-4072 PRESS BRAKE, Hurco 5C CNC Single Axis Back Gauge
$14,500
40 Ton 72" Bed Wysong H-4072 PRESS BRAKE, Hurco 5C CNC Single Axis Back Gauge
    40 TON x 6' WYSONG HYDRA-MECHANICAL PRESS BRAKE MODEL H-4072         S/N HPB13-263        NEW 1990   TONNAGE ...........
  • Tonnage: 40T
    18" Swing 72" Centers Norton LC-2, 30" DIA. WHEEL, OD GRINDER, HEAVY DUTY,
    $RFQ
    18" Swing 72" Centers Norton LC-2, 30" DIA. WHEEL, OD GRINDER, HEAVY DUTY,
      18" x 72" Norton "Heavy Duty" Plain Cylindrical Grinder   Model: Type LC-2      S/N: 26669       New: 1957   Specificat
    • Swing: 18"
    • Centers: 72"
      2" Dia. 12' Length ft Iemca TAL 65/12 AML BAR FEED, MAGAZINE BARFEED
      $3,950
      2" Dia. 12' Length ft Iemca TAL 65/12 AML BAR FEED, MAGAZINE BARFEED
      IEMCA TAL 65/12 AUTOMATIC MAGAZINE BARFEED FOR CNC LATHE S/N: 90122197   FOR BARS FROM 5MM TO 65MM, 12' LONG GUIDE CHANNEL STANDS & HYDRAULIC UNIT AUTOMATIC REMNANT RETRACT   LOCATION: HARRISON, NJ
      • Maximum bar diameter: 2.5"
      • Maximum bar length: 12'
        2" Dia. 12' Length ft Iemca TAL 65/12 AML BAR FEED, MAGAZINE BARFEED
        $3,950
        2" Dia. 12' Length ft Iemca TAL 65/12 AML BAR FEED, MAGAZINE BARFEED
        IEMCA TAL 65/12 AUTOMATIC MAGAZINE BARFEED FOR CNC LATHE S/N: 90072108   FOR BARS FROM 5MM TO 65MM, 12 LONG GUIDE CHANNEL STANDS & HYDRAULIC UNIT AUTOMATIC REMNANT RETRACT   LOCATION: HARRISON, NJ
        • Maximum bar diameter: 2.5"
        • Maximum bar length: 12'
          Gildemeister MF Sprint 42 CNC LATHE, Siemens 840C, Live Tool, Subspndl,FMBTurbo Barfeed
          $24,500
          Gildemeister MF Sprint 42 CNC LATHE, Siemens 840C, Live Tool, Subspndl,FMBTurbo Barfeed
          GILDEMEISTER MF SPRINT 42 MULTI-AXIS CNC TURNING CENTERNEW: 2000 SPECIFICATIONS:MAIN SPINDLE:BAR DIAMETER ................... 1.654" (42mm)SPINDLE HOLE DIAMETER .......... 2.205"MAIN DRIVE:MAX. DRIVE RATIN
          0" Dia. 0 Sleeper Hartley 721 SPRING COILER
          $6,500
          0" Dia. 0 Sleeper Hartley 721 SPRING COILER
          SERIES 721, SLEEPER & HARTLEY SPRING COILER     WIRE RANGE .............. .018"  TO .080"   STANDARD GROOVING ....... .024 - .038    .056  - 
          1/4" SHUSTER No. 1A5 WIRE STRAIGHTENER AND CUTOFF MACHINE
          $RFQ
          1/4" SHUSTER No. 1A5 WIRE STRAIGHTENER AND CUTOFF MACHINE
          MAX WIRE DIAMETER 3/16" .187" MAX CUTOFF LENGTH 9' 6" SPEED 110 FPM
          LEWIS MODEL #7D WIRE STRAIGHTENER & CUT-OFF MACHINE
          $RFQ
          LEWIS MODEL #7D WIRE STRAIGHTENER & CUT-OFF MACHINE
          WIRE CAPACITY .................. 1/16" TO 3/16" O.D. EQUIPPED WITH: 5 DIE ROTARY STRAIGHTENER 1 SET OF EXIT PINCH ROLLS THREE FOOT RACK DRIVE: WITH MOTOR AND CONTROLS OVERALL SIZE: 86" L x 2
          1/8" - 5/16" SHUSTER MDL# 2A4V 4-ROLL WIRE STRAIGHTENER & CUTOFF MACHINE
          $RFQ
          1/8" - 5/16" SHUSTER MDL# 2A4V 4-ROLL WIRE STRAIGHTENER & CUTOFF MACHINE
          Manufacturer: SHUSTER Model: 2A4V S/N: 2A4V 739 74 Year: 1974 Condition: VERY GOOD Specifications: WIRE DIAMETER .125"- .312" MAX CUTOFF LENGTH 10' SPEED RANGE 28 - 200 FPM MOTOR 15 HP ELE
          SHUSTER MODEL #12SFT ROTARY WIRE STRAIGHTENER
          $RFQ
          SHUSTER MODEL #12SFT ROTARY WIRE STRAIGHTENER
          Varidrive (Pinch Rolls) 1/2 HP 3/60/230-460 (1710 RPM) Varidrive (RPM) minimum/maximum 190 - 1900 2) 3/4 HP 3/60/230-460 (3505 RPM) on Straighteners with controls Capacity: High Tensile .010" to .025"
          TORRINGTON SPRING COILER
          $RFQ
          TORRINGTON SPRING COILER
          WIRE DIAMETER .................... .015" - .072" COIL O.D. ........................ .093" - 1.502" PRODUCTION RATE .................. 20 - 200 SPM EQUIPPED WITH LIGHT BAR
          TORRINGTON NO. W-21 SPRING COILER
          $RFQ
          TORRINGTON NO. W-21 SPRING COILER
          WIRE DIAMETER ...................... .015 - .072" COIL I.D. .......................... 3/32" - 1-9/16" WIRE LENGTH ........................ 1.1" - 600" EQUIPPED WITH: MOUNTED CONTRO
          TORRINGTON MODEL #W-21 WIRE SPRING COILING MACHINE
          $RFQ
          TORRINGTON MODEL #W-21 WIRE SPRING COILING MACHINE
          WIRE DIAMETER RANGE .............. .015" TO .072" WIRE LENGTH PER SPRING............ 2.2" TO 600" COIL I.D. RANGE .................. 3/32" TO 1" WEIGHT ........................... 7
          TORRINGTON #W-21 WIRE SPRING COILING MACHINE
          $RFQ
          TORRINGTON #W-21 WIRE SPRING COILING MACHINE
          Wire diameter range .015" to .072" Coil O.D. Range 3/32" to 1-9/16" Wire length per spring 1.1. to 600" Equipped with: Double diameter and Double pitch 1-1/2 HP 3/60/220-440 (1800 RPM), 50
          TORRINGTON M# W12-A SPRING COILER
          $RFQ
          TORRINGTON M# W12-A SPRING COILER
          WIRE RANGE.......................... .047" TO .148" CONST. COIL OD. RANGE............... 1/4" TO 2-3/4" SPEED............................... 7 TO 180 SPRINGS PER MINUTE WIRE LENGTH PER SPRING: S
          LUBOW #C-1 TRIMMER
          $RFQ
          LUBOW #C-1 TRIMMER
          WIRE CAPACITY 2/16 600 SPM EQUIPPED WITH: 110 VOLT MOTOR WEIGHT: 355 LBS. O.A. DIM.: 27 X 23 X 41"
          No. S1, NILSON FOUR SLIDE WIRE FORMING MACHINE
          $RFQ
          No. S1, NILSON FOUR SLIDE WIRE FORMING MACHINE
          MAX. WIRE DIA .................. 3/32" MAX WIDTH OF STRIP ............. 1" STANDARD FEED LENGTH ........... 8" SPM ............................ 47 - 234 WIRE LINE HEIGHT ............... 35-3/4" W
          No. S1, NILSON FOUR SLIDE WIRE FORMING MACHINE
          $RFQ
          No. S1, NILSON FOUR SLIDE WIRE FORMING MACHINE
          MAX WIRE DIA .................... 3/32" MAX WIDTH STRIP METAL ........... 1" STANDARD FEED LENGTH ............ 8" SPM ............................. 47 - 234 WIRE LINE HEIGHT ................ 35-3/4
          RMG Mdl# 910-72540-73 WIRE DRAWER, AUTO DRAW
          $RFQ
          RMG Mdl# 910-72540-73 WIRE DRAWER, AUTO DRAW
          RMG 910-75240-73 WIRE DRAWER Manufacturer: RMG Model: 910-75240-73 S/N: 88061963 Year: 1988 Condition: GOOD Specifications: CAPSTAN DIAMETER 36" MAXIMUM WIRE DIAMETER (ALLOY) .562" (14.2mm) MAXIMUM W
          RMG Mdl# 56-1088-68 WIRE DRAWER, AUTO DRAW
          $RFQ
          RMG Mdl# 56-1088-68 WIRE DRAWER, AUTO DRAW
          RMG 56-1088-68 WIRE DRAWER Manufacturer: RMG Model: 56-1088-68 S/N: 94023187 Year: 1994 Condition: GOOD Specifications: CAPSTAN DIAMETER 24" MAXIMUM WIRE DIAMETER (ALLOY) .312" (8.0mm) MAXIMUM WIRE D
          PAY OFF WIRE WHEEL TABLE
          $RFQ
          PAY OFF WIRE WHEEL TABLE
          Table Diameter: 48" Spool Height: 9" I.D.: 35"
          TORRINGTON #W12A SPRING COILER
          $RFQ
          TORRINGTON #W12A SPRING COILER
          WIRE DIAMETER RANGE ................. .047" - .148" COIL O.D. RANGE ..................... .250" - 2.750" STANDARD PRODUCTUON SPEED ........... 7 - 180 SPM O.A. DIM. ..........................
          US CARBIDE ROTARY TABLE BENDER
          $RFQ
          US CARBIDE ROTARY TABLE BENDER
          WIRE DIAMETER: 5/16" MAX. AIR OPERATED EQUIPPED WITH: WITH TOOLING FOOTPEDAL WEIGHT: 545 LBS. O.A. DIM.: 80" X 28" 40"
          LUBOW #WBR3 WIRE BENDER
          $RFQ
          LUBOW #WBR3 WIRE BENDER
          WIRE DIAMETER: 3/16" MAX. SINGLE STOP AIR OPERATED EQUIPPED WITH: TOOLING FOOT PEDAL WEIGHT 710 LBS. O.A. DIM. 101" X 17" X 42" HIGH
          LUBOW No. LM10 HORIZONTAL PNEUMATIC TABLE BENDER
          $RFQ
          LUBOW No. LM10 HORIZONTAL PNEUMATIC TABLE BENDER
          MAX ...................... 3/16" BED ...................... 24" X 60" AIR OPERATED SINGLE STOP FOR FLATS AND ROUNDS INCLUDING SCROLL TOOL FOOT CONTROL
          LUBOW #BB 48" BENDER
          $RFQ
          LUBOW #BB 48" BENDER
          WIRE DIAMETER: 3/8" X 48" FRAME WEIGHT: 1,600 LBS. O.A.DIM.: 79" X 37: X 56" EQUIPPED WITH: FOOT PEDAL
          LUBOW #6-22-77 BUTT WELDER
          $RFQ
          LUBOW #6-22-77 BUTT WELDER
          SINGLE PHASE MICRO PROCESSOR CONT5OLS #105 50 KVA EQUIPPED WITH: MOUNTED CONTROLS
          30,000# BRADBURY COIL UPENDER
          $RFQ
          30,000# BRADBURY COIL UPENDER
          Coil Capacity: 30,000# V-Deck: 60" x 59" Roll Conveyor Platform Deck: 67" x 59" Motorized Tilt Dual Chains Push Button Controls Spare V-Deck Platform Motor: 3HP, Baldor, 1725 RPM, 230/4
          6000# x 48" AMERICAN STEEL UNCOILER
          $RFQ
          6000# x 48" AMERICAN STEEL UNCOILER
          6000# X 48" AMERICAN STEEL UNCOILER MFG - AMERICAN STEEL S/N - 5669 TYPE - MANDREL UNCOILER MAX WIDTH - 48" COIL ID MIN - 14.5" COIL OD - 36.5"
          24" x .500" TORRANCE #TMC-450 API PIPE MILL
          $RFQ
          24" x .500" TORRANCE #TMC-450 API PIPE MILL
          Manufacturer: Torrance USA Model: TMC-450 Diameters: 6 5/8" -24" Thickness Range: 5/32"-1/2" Mill Speed: Up to 21mpm Steel Grades API: X42, X52, X60, X70 Complete Tube Production Line with the
          SOCO EF-PV-52 TUBE AND BAR END FINISHING MACHINE
          $RFQ
          SOCO EF-PV-52 TUBE AND BAR END FINISHING MACHINE
          TUBE AND BAR END FINISHING MACHINE 12" X 15" HEAD CAPACITY TUBE 9-52mm CAPACITY BAR 9-25mm EQUIPPED WITH: 1 HP 230/440 VOLTS 3 PHASE 1.5 AMPS 1720 RPM MOTOR FOOT PEDAL CONTROLS MISC. TOO
          CONDUIT THREADER, DOUBLE END
          $RFQ
          CONDUIT THREADER, DOUBLE END
          MAX. TUBE LENGTH TO BE THREADED ........... 8' O.A. DIM. ...........(L X W X H)........... 182" X 72" X 48" WEIGHT .................................... 4,500 LBS, EQUIPPED WITH: DISC BRAKES ON
          CONDUIT THREADER, DOUBLE END
          $RFQ
          CONDUIT THREADER, DOUBLE END
          MAX. TUBE LENGTH BE THREADED ........... 8' O.A. DIM. ........(L X W X H)........... 182" X 72" X 48" WEIGHT ................................. 4,500 LBS EQUIPPED WITH: DISC BRAKES ON THREADING HEA
          SASPI Mdl# RV-8 THREAD ROLLING MACHINE
          $RFQ
          SASPI Mdl# RV-8 THREAD ROLLING MACHINE
          MAX. WIRE DIA. 5/16" EQUIPPED WITH: 30" VIBRA BOWL MOUNTED CONTROLS 8' CONVEYOR 15 HP 230 VOLT 1175 RPM 60 HZ 38.4 AMPS MOTOR O.A. DIM. 64" X 118" X 85" WEIGHT 8,115 LBS.
          SMART Mdl# NGL 100 THREAD ROLLER
          $RFQ
          SMART Mdl# NGL 100 THREAD ROLLER
          MACHINE SIZE 20/30 DIAMETER RANGE ............ 2 - 12 mm SHAFT LENGTH UNDER HEAD ... 160 mm MAX THREAD LENGTH ......... 100 mm SPEED ..................... 210 - 270 WEIGHT .................... 4.1 TONS WEIGHT .....
          1/2" WATERBURY-FARREL #30 HEAVY FRAME HAND FEED FLAT DIE THREAD ROLLER
          $RFQ
          1/2" WATERBURY-FARREL #30 HEAVY FRAME HAND FEED FLAT DIE THREAD ROLLER
          MAXIMUM THREAD DIAMETER ................... 1/2" MAXIMUM THREAD LENGTH ..................... 3" STATIONARY DIE POCKET ..................... 7-1/4" LG X 4" DP MOVABLE DIE POCKET ....................
          1/4" WATERBURY HEAVY FRAME THREADER #10 W/ VIBRATORY BOWL
          $RFQ
          1/4" WATERBURY HEAVY FRAME THREADER #10 W/ VIBRATORY BOWL
          CAPACITY .................. `1/4"`` LENGTH OF THREAD .......... 2-1/8" PPM ........................ 100 EQUIPPED WITH:- VIBRATORY BOWL STAND FOR BOWL E
          (NEW) WARDSBORO MODEL #WB-250 THREAD ROLLER
          $RFQ
          (NEW) WARDSBORO MODEL #WB-250 THREAD ROLLER
          Screw Diameter Capacity ...................... 2mm - 6mm (3/16") Maximum Shank Length ......................... 50mm (2") Maximum Threaded Shank Length ................ 41mm (1-5/8") Product
          5/32"WARREN M# WT500 HIGH SPEED THREAD ROLLER W/ VIBRATORY BOWL
          $RFQ
          5/32"WARREN M# WT500 HIGH SPEED THREAD ROLLER W/ VIBRATORY BOWL
          CAPACITY .................... 5/32" THREAD DIE LENGTH ........... 1-1/8" SHANK LENGTH ................ 1-1/4" PPM ......................... 150 - 1100 EQUIPPED WITH:- VIBRATORY BOWL TH
          SNOW M#SD-1 TAPPING MACHINE
          $RFQ
          SNOW M#SD-1 TAPPING MACHINE
          HP ........................ 1/2" SPEED ..................... 3450 220/3/60 CONTROL CIRCUIT AND LIGHT (110 VOLTS) OMI
          4" (100MM) SUTTON TWO PLANE SHAPE STRAIGHTENER
          $RFQ
          4" (100MM) SUTTON TWO PLANE SHAPE STRAIGHTENER
          MANUFACTURER: SUTTON MODEL: 3 3-1/2L SERIAL NUMBER: 1160 TYPE: TWO PLANE (SEPARATE HORIZONTAL & VERTICAL UNITS W/ COMMON DRIVE) CAPACITY: 1/4" x 1" - 1-1/2" x
          FENN 4 1/2F 2 DIE SWAGER w/HYDRAULIC FEED TABLE
          $RFQ
          FENN 4 1/2F 2 DIE SWAGER w/HYDRAULIC FEED TABLE
          MANUFACTURER: FENN SERIAL NUMBER: 52489 MODEL: 4 1/2F CAPACITY: 2.25" (57.2mm) DIAMETER TUBING 15/16" (23.8mm DIAMETER SOLID DIE SIZE: WIDTH: 3-1/8" (88.9mm) HEIGHT: 2.250" (57.2mm) LENGT
          HUFFORD #A5 CNC EXTRUSION STRETCH-WRAP FORMER
          $RFQ
          HUFFORD #A5 CNC EXTRUSION STRETCH-WRAP FORMER
          1 - used L&F HUFFORD CNC EXTRUSION STRETCH WRAP FORMING MACHINE Model A-5, Serial Number 81127-1 DeMott Controls Model D2732-001, Serial Number 2732-2 FORMING TONNAGE 12 JAW AXIAL ROTATION +/- 180 Degrees
          8" x 1-1/2" PERFECTO #28-8-7, LEVELLER, 7 ROLL
          $RFQ
          8" x 1-1/2" PERFECTO #28-8-7, LEVELLER, 7 ROLL
          SPECIFICATIONS -MANUFACTURER: PERFECTO -MODEL: 28-8-7 -TYPE: 7 ROLL LEVELLER -CAPACITY -MINIMUM: .187" (4.7mm) THICK -MAXIMUM:
          8" x 1-1/2" LITTELL 7 ROLL LEVELLER
          $RFQ
          8" x 1-1/2" LITTELL 7 ROLL LEVELLER
          SPECIFICATIONS -MANUFACTURER: LITTELL -TYPE: LEVELLER -LEVELLING ROLLS -QTY: 7 -CONFIGURATION: 3 OVER 4 LOWER ROLLS FIXED- UPPER ROLLS ADJUSTA
          4.25" x 52" TORRINGTON MODEL #1010 STRAIGHTENING MACHINE
          $RFQ
          4.25" x 52" TORRINGTON MODEL #1010 STRAIGHTENING MACHINE
          FOUR (4) ROLLS OVER FIVE (5) ROLL SIZE ............................. 4.250" DIAMETER X 52" FACE MAXIMUM GAUGE CAPACITY ................ .090" MILD STEEL NAXIMUM WIDTH ......................... 48"
          .030" x 7" RASTER MODEL #18180 19-ROLL POWER STOCK STRAIGHTENER
          $RFQ
          .030" x 7" RASTER MODEL #18180 19-ROLL POWER STOCK STRAIGHTENER
          CAPACITY ................................ 7" WIDE O.A. DIMENSIONS ....(LR X FB X HIGH)..... 4'8" X 4' X 4'10" WEIGHT .................................. 4000 LBS., est. EQUIPPED WITH: NIN
          SUTTON 40H SHAPE STRAIGHTENER
          $RFQ
          SUTTON 40H SHAPE STRAIGHTENER
          SUTTON 40H SINGLE PLANE HORIZONTAL USED SHAPE STRAIGHTENER MODEL NO: 40H MANUFACTURER: SUTTON UPGRADES PERFORMED: 1996 (MOTOR HP INCREASED) NUMBER OF STRANDS 1 NUMBER OF PLANES 1
          LUBOW #RIP-7 SHEAR
          $RFQ
          LUBOW #RIP-7 SHEAR
          WITH 3/4 HP 1725 RPM MOTOR AND CONTROLS WEIGHT: 695 LBS. O.A. DIM.: 34" X 26" X 57" HIGH
          KRB Mdl# H2000 HYDRAULIC SHEAR WITH MINILINE
          $RFQ
          KRB Mdl# H2000 HYDRAULIC SHEAR WITH MINILINE
          - Guillotine handles #3 (23 at a time) through #14 bar (2 at a time) - ASA Computerized touch screen console with scanner - 20 hp hydraulic power unit - Scrap Hopper - 6
          USED METLSAW R1214/T8 Aluminum Plate Saw
          $RFQ
          USED METLSAW R1214/T8 Aluminum Plate Saw
          GRADES: All grades of Aluminum THICKNESS: Min 1/8" thru Max 8" thick THROAT: 192" (16') BACKGAUGE: 144" KERF LOSS: 0.250" 5.22-1/2" BLADES, SQUARING DEVICE, MATER
          BEHRINGER M# HBP 310-523G SEMI-AUTOMATIC MITER BAND SAW
          $RFQ
          BEHRINGER M# HBP 310-523G SEMI-AUTOMATIC MITER BAND SAW
          Used Behringer Semi-Automatic Miter Band Saw Model HBP 310-523G Cutting Capacity: Round - 90 degrees ........... 12.2" Rectangle - 90 degrees ....... 20.5" x 12.2" (w x h) Round - 45 degre
          WATERBURY FARREL ZR16-835 SENDZIMIR 12-HI ROLLING MILL
          $RFQ
          WATERBURY FARREL ZR16-835 SENDZIMIR 12-HI ROLLING MILL
          WATERBURY FARREL ZR16-8.5 SENDZIMR 12-HI ROLLING MILL Mill Strip Width Max. 8.5" (216mm) Min strip width 4" (100mm) Max. Incoming Thickness .080" (2.0mm) Min. Out Fin
          24 STANDS LAGUN-ARTEA BAR MILL
          $RFQ
          24 STANDS LAGUN-ARTEA BAR MILL
          Year:2008 Production Capacity: 500,000 Tons / Year. Reheating Furnace: 90 Ton / H. Mill Arrangement: Horizontal/Vertical Billet Size: 130 X 130/140 X 140/160 X 160 X 12000 mm Finished Products:8 - 32mm Round &
          DANIELI STEEL MILL FOR BAR AND REBAR
          $RFQ
          DANIELI STEEL MILL FOR BAR AND REBAR
          Production Capacity:650,000 Ton (1995) EAF Melting Furnace:120 Ton 6 Strand Continuous Casting Reheat Furnace (2) Bar Mill Danieli 11 Stand Lagun-Artea 24 Stand Dual Path DANIELI DC ELECTRIC FURNACE Shell D
          11 STANDS DANIELI BAR MILL
          $RFQ
          11 STANDS DANIELI BAR MILL
          Year: 1995 Production Capacity: 270,000 Tons / Year. Reheating Furnace: 50 Ton / H. Mill Arrangement: Horizontal Billet Size:120 X 120 / 130x130 / 140x140 / 130x190 X 6000 Mm Finished Products: 10mm to 32mm Roun
          88 TON PEDDINGHAUS M#88/120 PEDDIMASTER HYDRAULIC IRONWORKER
          $RFQ
          88 TON PEDDINGHAUS M#88/120 PEDDIMASTER HYDRAULIC IRONWORKER
          Punch Capacity ......... 88 Ton (1-1/16" Round thru 3/4" Mild Steel) Throat Depth ........... 20 in. Angle Shear Capacity ... 5" x 5" x 1/2" Flat Shear Capacity ................ 20"
          500 Ton RAVNE MDL# SE4-500-180-96 SSDC PRESS
          $RFQ
          500 Ton RAVNE MDL# SE4-500-180-96 SSDC PRESS
          YEAR: 2000 RATED FORCE 12.7mm ABOVE BDP.........500 M TONS SLIDE STROKE.........................36" SLIDE ADJUSTMENT.....................14" SHUT HEIGHT/S.D.A.U/OVER BOLSTER.....40" STROKES PER MI
          440 Ton CLEARING-NIAGARA MDL #SE4-440-144-96 SSDC PRESS
          $RFQ
          440 Ton CLEARING-NIAGARA MDL #SE4-440-144-96 SSDC PRESS
          CAPACITY OF PRESS ................... 440 US TONS RATED POSITION ...................... 0.5" UP FROM BOTTOM RATED ENERGY (@ 10 SPM) ............. 220 INCH TONS STROKE OF PRESS ..................... 36.00 IN. ADJ
          NIMBL ROBOTS FOR POWDER METAL PRESSED PARTS HANDLING
          $RFQ
          NIMBL ROBOTS FOR POWDER METAL PRESSED PARTS HANDLING
          SPECIFICATIONS: ROBOTS FOR PRESSED PARTS HANDLING AND COMPLETE COAT AND ANNEAL LINES
          150 TON NIAGARA MODEL #PN150-72x36 GAP FRAME DOUBLE CRANK PRESS
          $RFQ
          150 TON NIAGARA MODEL #PN150-72x36 GAP FRAME DOUBLE CRANK PRESS
          CAPACITY ............................ 150 TON STROKE .............................. 6" SHUT HEIGHT ......................... 14" SLIDE ADJUSTMENT .................... 5" THROAT ............. ..........
          85 TON NIAGARA MODEL #B4X72 GAP FRAME DOUBLE CRANK PRESS
          $RFQ
          85 TON NIAGARA MODEL #B4X72 GAP FRAME DOUBLE CRANK PRESS
          Stroke of slide ........................... 1-1/2" Shutheight ................................ 14" Depth of Throat ........................... 11-1/2" Strokes per minute ........................ 65 Bed
          1000 TON SCHLOEMANN SIEMAG OPEN DIE, HYDRAULIC FORGING PRESS
          $RFQ
          1000 TON SCHLOEMANN SIEMAG OPEN DIE, HYDRAULIC FORGING PRESS
          2 POST FRAME WORKING PRESSURE..... 315KP/CM2 PRESSING CAPACITY..... 1000MP RETURNING CAPACITY.... 240MP PISTON STROKE...... 800MM DAYLITE (MAX DISTANCE BETWEEN BED & RAM)..2250MM DISTANCE BETWEEN POST (BED & RAM AR
          WATERBURY FARREL M#20-12 ICOP TRANSFER PRESS
          $RFQ
          WATERBURY FARREL M#20-12 ICOP TRANSFER PRESS
          12 Plungers plus 1 aux 3-3/4" Max blank dia. 6" Shut height over dies 3-1/8 Max depth of shell 35-70 SPM 4" Center Distance 24,000# Weight 162" x 85" Approx. Floor Space Can be shown unde
          WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
          $RFQ
          WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
          WATERBURY FARRELL Model 2010 ST2375493237554 10 Stations - round plunger machine 5-1/2" Plunger to top of die 3-3/4" max blank diameter 4" center distance 5-3/8" Stroke 60-90 SPM 17,500
          WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
          $RFQ
          WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
          WATERBURY FARRELL Model 2010 ST2375492237687 10 Stations - round plunger machine 5-1/2" Plunger to top of die 3-3/4" max blank diameter 4" center distance 5-3/8" Stroke 60-90 SPM 17,500
          WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
          $RFQ
          WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
          WATERBURY FARRELL Model 2010 S6248462598 10 Stations - round plunger machine 5-1/2" Plunger to top of die 3-3/4" max blank diameter 4" center distance 5-3/8" Stroke 60-90 SPM 17,500 #
          WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
          $RFQ
          WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
          WATERBURY FARRELL Model 1510 ST23647721236558 10 Stations 3-3/8 Center Distance 3-1/4" Stroke 60-100 SPM 11,000#
          WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
          $RFQ
          WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
          WATERBURY FARRELL Model 1510 ST187535192236011 10 Stations 3-3/8 Center Distance 3-1/4" Stroke 60-100 SPM Broken top shaft 11,000#
          PLATARG M#912 TRANSFER PRESS
          $RFQ
          PLATARG M#912 TRANSFER PRESS
          Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave 6.50" (165 mm) long Stroke - 3.11" (79mm) depth of draw Wedge Adjustable Rams Platarg Single Roll Material Feed and Guillotine Insert Finge
          4000MT Ton INNSE DIRECT / INDIRECT PRESS WITH PIERCER WITH OMAV HANDLING EQUIP.
          $RFQ
          4000MT Ton INNSE DIRECT / INDIRECT PRESS WITH PIERCER WITH OMAV HANDLING EQUIP.
          Purchased New in 1990 / Never Installed Most components still in original packaging Main cylinder: Forged steel Tie rods: 4-forged steel Press Capacity: 3160-4000 MT Operating pressure max: 250 bar Billet diam
          3000 MM DIA X 24 MM THICKNESS SPRIAL PIPE MILL
          $RFQ
          3000 MM DIA X 24 MM THICKNESS SPRIAL PIPE MILL
          MAKER: SEAH BUILT: 1990 PRODUCT SPEC: KS, JIS, ASTM, API, AWWA PRODUCT SIZE: DIA.............400 - 3000 MM LENGTH..........3 - 24 METER THICKNESS.......6 - 24 MM FORMING ANGLE...10 - 45" COIL WEIGHT: 30 TO
          3000MM DIA X 24 MM THICKNESS SPIRAL PIPE MILL
          $RFQ
          3000MM DIA X 24 MM THICKNESS SPIRAL PIPE MILL
          MAKER: SEAH BUILT: 1995 PRODUCT SPEC: KS, JIS, ASTM, API, AWWA PRODUCT SIZE: DIA.............400 - 3000 MM LENGTH..........3 - 24 METER THICKNESS.......6 - 24 MM FORMING ANGLE...10 - 45" COIL WEIGHT: 30
          NATIONAL MODEL #750, 6-DIE COLD FORMER
          $RFQ
          NATIONAL MODEL #750, 6-DIE COLD FORMER
          Specifications : Cutoff diameter mild...............7/8" / 19 mm Cutoff diameter alloy .............3/4" / 22 mm Kickout length .................... 4" / 100 mm Cutoff length......................3&
          41.33" X 0.019" UNGERER MDL. STR200-1050 STRETCH BEND LEVELING LINE
          $RFQ
          41.33" X 0.019" UNGERER MDL. STR200-1050 STRETCH BEND LEVELING LINE
          MATERIAL: STAINLESS STEEL, NICKEL ALLOYS, AND COPPER ALLOYS TENSILE STRENGTH: 550-800 N/mm2 0.2% PROOS STRESS: 400-700 N/mm2 ELONGATION: 2.5-28% WIDTH: 450-1050 mm THICKNESS: 0.08-0.5 (0.8) mm RATIO OF CROSS SECTIO
          HATEBUR BKA2 4 DIE PROGRESSIVE HEADER
          $RFQ
          HATEBUR BKA2 4 DIE PROGRESSIVE HEADER
          DIAMETER RANGE ................ 6 - 12 mm SHAFT LENGTH UNDER HEAD ....... 15 - 102 mm KICKOUT LENGTH MAX ............ 40 mm SPEED /MIN .................... 15 - 125 WEIGHT ........................ 24.000 lbs. EQUI
          1/2" WATERBURY 2 DIE 4 BLOW COLD HEADER
          $RFQ
          1/2" WATERBURY 2 DIE 4 BLOW COLD HEADER
          PPM ...................................... 70 MAX WIRE DIA. ............................ 1/2" MAX WIRE CUTOFF ......................... 5-1/2" MAX LENGTH THAT CAN BE TRANSFERRED ....... 3- 3/4" MAX
          EBNER GAS-FIRED HICON/N2 BELL ANNEALER FACILITY, TYPE HOG 430/250 ST-N2-D, TO
          $RFQ
          EBNER GAS-FIRED HICON/N2 BELL ANNEALER FACILITY, TYPE HOG 430/250 ST-N2-D, TO
          EBNER GAS-FIRED HICON/N2 BELL ANNEALER FACILITY, TYPE HOG 430/250 ST-N2-D, TO ANNEAL STEEL WIRE COILS IN STRAIGHT NITROGEN ATMOSPHERE TECHNICAL DATA EACH UNIT Effective dimensions of workload space: Diameter (c
          DANIELI WEAN UNITED HOT DIP GALVANIZING AND COIL COATING LINE
          $RFQ
          DANIELI WEAN UNITED HOT DIP GALVANIZING AND COIL COATING LINE
          DANIELI WEAN UNITED CONTINUOUS GALVANIZING & COIL COATING LINE Production Start up- February, 2002 LINE SPECIFICATIONS Entry Material: Cold Rolled Steel Full Hard: 0.4mm to 3.0mm MATERIAL PRODUCED Th
          20-3/4 (527mm) METATHERM TWIN STRAND STRIP CASTER
          $RFQ
          20-3/4 (527mm) METATHERM TWIN STRAND STRIP CASTER
          HORIZONTAL CONTINUOUS STRIP CASTING LINE STRIP THICKNESS ...........0.500"(12.7mm)MIN 0.720"(18.2mm)MAX WIDTH OF STRANDS ..........2X14.6"(370mm)MIN 2X20.75(527mm)MAX CASTING SPEED .............6.5
          Categories:
          Condition:
          • X Used (2219)
          Manufacturer:
          Location:
          • X New Jersey (2219)
          Price:
          •  to 
          <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>