Used Grinders & Grinding Machines For Sale

K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET

$1,500

THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE

Bethlehem, PA
View Listing

K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET

$RFQ

THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE

Bethlehem, PA
View Listing

12" x 24" Supertec #G32P-60NC, 7.5 HP, #4MT, spindle motor on wheelhead, Mitsubi

$34,500

no description provided

South El Monte, CA
View Listing

2" X 42" BRYANT CENTER HOLE GRINDER, REBUILT

$RFQ

2" X 42" BRYANT CENTER HOLE GRINDER Serial No. C14452 Rebuilt With 6-Month Warranty 1/4 HP, 220/440 Volt, 3-Phase, 6

Bannockburn, IL
View Listing

2" X 72" BRYANT CENTER HOLE GRINDER - REBUILT

$RFQ

2" X 72" BRYANT CENTER HOLE GRINDER - REBUILT Serial No. C13742 Rebuilt 1/4 HP, 220/440 Volt, 3-Phase, 60 Cycle, Pla

Bannockburn, IL
View Listing

K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET

$1,250

THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE

Maximum workpiece diameter: 1"

Bethlehem, PA
View Listing

BLACK DIAMOND MODEL DD2 BENCH TYPE DRILL GRINDER, 1/8” – 1-1/2”

$RFQ

SPECIFICATIONS DRILL SIZES: 1/8” TO 1-1/2” CUP WHEEL: 6” X 1-1/4” X 1-1/8” GRINDING WHEEL: 6” X 7/8” X 1-1/8” DRILL POINT ANGLE: 59° (ADJUSTABLE FROM 40° TO 70°) CLEARANCE (VARIABLE): 5° TO 16&#

Maximum drill capacity: 1.5"

Bethlehem, PA
View Listing

1981 K O LEE MODEL B2000 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"

$RFQ

SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 32" DISTANCE BETWEEN WORK HEAD & TAILSTOCK CENTERS: 26" DISTANCE BETWEEN WORK HEAD COLLET AND TAILSTOCK: 27" DISTANCE BETWEEN CHUCK FACE AND TAILSTOC

Bethlehem, PA
View Listing

1990 OPTIMA OPTICAL DRILL GRINDER, 1"

$RFQ

ONLY THE OPTIMA HAS A RANGE FROM .0135" TO 1.000" DIA. IT WILL GRIND RIGHT AND LEFT HAND DRILLS, HIGH SPEED STEEL AND CARBIDE TIPPED OR SOLID CARBIDE DRILLS, SPADE DRILLS, COUNTERSINKS, CENTER DRILLS OF ALL TY

Maximum drill capacity: 1"

Bethlehem, PA
View Listing

1976 CINCINNATI #2 MODEL DO TOOL & CUTTER GRINDER, 5-1/4” X 37”

$RFQ

CAPACITY SWING OVER TABLE: 10-1/2" LENGTH, BETWEEN TAILSTOCKS: 33" LENGTH, BETWEEN TAILSTOCK & WORKHEAD: 28" FACE MILLS ON WORKHEAD (MAX DIAMETER): 10" SAWS ON TABLE (DIAMETER 48" FORME

Maximum workpiece diameter: 10"

Bethlehem, PA
View Listing

Amada ToguIII Tool Grinder

$18,000

Maximum grinding amount - .099'' maximum tool diameter - 4 1/2'' dies Minimum tool diameter - .059'' Standard grinding wheel - 5.315'' Vertical travel distance - 9.449'' Coola

Kenosha, WI
View Listing

MITTS & MERRILL FOOTBURT CRANKSHAFT LAPPER

$24,500

MITTS & MERRILL FOOTBURT CRANKSHAFT LAPPER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $24,500.00 HMC Stock # 19213 Machine Serial No.: 80101 Model No.: HDB New Date: 1980 Used for Polishing / Lapping Hard B

York, PA
View Listing

CURTIS KELSEY BELT GRINDING HEAD

$3,950

CURTIS KELSEY BELT GRINDING HEAD PRICE: Loaded on Truck, Our Warehouse, York, PA …… $3,950.00 HMC Stock # 19187-P Unit Serial No.: RG2050174 Unit Model No.: RG-2-BT Sanding Belt Size: 2" x 90" Rubber Contact Wheel:

York, PA
View Listing

2014 CHEVALIER FSG-1224ADIII AUTO SURFACE GRINDER WITH PLC, 12" X 24&q

$RFQ

SPECIFICATIONS MAXIMUM GRINDING LENGTH: 24" MAXIMUM GRINDING WIDTH: 12" MAXIMUM SPINDLE CENTER TO TABLE SURFACE: 24" STANDARD MAGNETIC CHUCK SIZE: 11-3/4" X 23-5/8" GRINDING WHEEL: 14&quo

Table width: 12"
Table length: 24"

Bethlehem, PA
View Listing

1992 CHEVALIER MODEL FSG-1224AD FULLY AUTOMATIC SURFACE GRINDER, 12”X 24”

$RFQ

TABLE SIZE: 11-3/4" X 23-5/8" MAX GRINDING LENGTH: 24" MAX GRINDING WIDTH: 12" MAX DISTANCE FROM TABLE SURFACE TO SPINDLE CENTERLINE: 19-3/4” STANDARD MAGNETIC CHUCK SIZE: 11-3/4" X

Table width: 12"
Table length: 24"

Bethlehem, PA
View Listing

Cincinnati 3EF CINTERNAL CNC ID GRINDER

$RFQ

Cincinnati-Milacron Heald Model 3EF-Cinternal Multi-Surface CNC I.D. Grinder S/N: 913527P84-0107 New: 1984 Acramatic 700G

Harrison, NJ
View Listing

20" Y Axis 36" X Axis Moore-Fosdick 42G, PROTOTYPE AEROSPACE MACHINE, JIG GRINDE

$RFQ

MOORE-FOSDICK "LARGE-CAPACITY" JIG GRINDER ** USED IN AEROSPACE PROTOTYPE SHOP - HOLY COW IS THIS MACHINE NICE! **

Harrison, NJ
View Listing

12" Width 30" Length Acer AGS-1230AHD SURFACE GRINDER, 12"X30. 3-AXIS AUTO

$RFQ

"NEW" ACER HIGH PRECISION SURFACE GRINDER MODEL: AGS-1230AHD - 3 Axis Automatic FEATURES: (3-Axis Auto Movement) Precison "Turcite-B" Ways Hydraulic Table & Electronic Cross Feed Aut

Harrison, NJ
View Listing

USED K O LEE MODEL BA900 TOOL GRINDER, 5.25” X 27.25”

$RFQ

SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 22” TABLE WORKING SURFACE: 5-1/4” X 27-1/4” SUB TABLE: 8” X 36” TOTAL CROSS FEED: 7-1/4” FEED EACH REVOLUTION OF HAND WHEEL: .100” TABLE TRAVERSE: 14” SWING OVER TA

Bethlehem, PA
View Listing

USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”

$RFQ

SPECIFICATIONS CONE ANGLE TO GROUND CENTER HOLES: 60° MAXIMUM DIAMETER OF GROUND CENTER HOLES: 2” MAXIMUM DIAMETER OF WORKPIECE: 5” MAXIMUM WORKPIECE LENGTH: 43” HEADSTOCK AXIS TO COLUMN FACE: 6” GRINDIN

Grinding wheel diameter: 2"
Maximum length: 43"

Bethlehem, PA
View Listing

5" Swing 12" Centers Myford MG12-M, NEW 1986, HAND FEEDS, SWING DOWN I.D. OD GRI

$RFQ

5" X 12" MYFORD (MADE IN ENGLAND) HIGH-PRECISION HAND FEED I.D./O.D. PLAIN CYLINDRICAL GRINDER ** MYFORD SWING DOWN I.D. GRINDING ATTACHMENT & I.D. SPINDLE **

Harrison, NJ
View Listing

0HP Motor Themac J-4, FOR 12" TO 15" LATHES, TOOL POST GRINDER, 1/2" TO 4&q

$RFQ

Themac Tool Post Grinder Model: J-4 Information from Themac's website: 1/2 H.P., Internal & External, 5,800-42,000 rpm Regular price $2,400.00 The Themac J-4 t

Harrison, NJ
View Listing

OLIVER TOOL AND CUTTER GRINDER, MODEL 300 HD "ACE"

$RFQ

OLIVER TOOL AND CUTTER GRINDER MODEL 300 HD "ACE" S/N 1114 NEW 1982 WORK SURFACE OF TABLE --------------------- 16" X 16" SPINDLE SPEEDS ----------- ( 3 ) --

Des Plaines, IL
View Listing

BROWN & SHARPE UNIVERSAL TOOL & CUTTER GRINDER, MODEL 13

$RFQ

BROWN & SHARPE UNIVERSAL TOOL & CUTTER GRINDER MODEL 13 S/N 523-13-882 MAXIMUM GRINDING DIAMETER --------------------- 8" MAXIMUM GRINDING LENGTH -----------------------

Maximum workpiece diameter: 8"

Des Plaines, IL
View Listing

RUSH SEMI-AUTOMATIC DRILL & TOOL GRINDER, MODEL 252S

$RFQ

RUSH SEMI-AUTOMATIC DRILL & TOOL GRINDER MODEL 252S S/N 1592 NEW 1991 DRILL DIAMETER RANGE ----------------------- 3/32" TO 2" ( STRAIGHT OR TAPER SHANK

Des Plaines, IL
View Listing

122" GOCKEL KNIFE GRINDER MODEL G50 ELT

$RFQ

122" GOCKEL KNIFE GRINDER MODEL G50 ELT S/N 7039 NEW 1991 MAXIMUM WORK LENGTH ----------------------- 122" ( 3100 mm ) MAXIMUM WORK WIDTH ----------------------

Maximum grinding length: 122"

Des Plaines, IL
View Listing

2001 OKAMOTO MODEL ACC-6.18DX 3-AXIS HYDRAULIC SURFACE GRINDER, 6" X

$RFQ

CAPACITIES WORKING SURFACE: 6” X 20” GRINDING WHEEL TO TABLE SURFACE: 11.7” TABLE LOAD CAPACITY: 264 LBS LONGITUDINAL FEED: .33 – 66 FPM INTERMITTENT HYDRAULIC CROSS FEED: .004” - .02” AUTO DOWN FEED TRA

Chuck: 8"

Bethlehem, PA
View Listing

2005 KENT MODEL KGS-616S MANUAL SURFACE GRINDER, 6" X 16"

$RFQ

SPECIFICATIONS CAPACITIES LONGITUDINAL TABLE TRAVEL: 16.9” CROSS FEED TABLE TRAVEL: 7.9” WORKING SURFACE: 6” X 16” SPINDLE CENTER TO TABLE TOP: 17.3” GRINDING WHEEL SIZE: 8” X 3/4” X 1-1/4” SPINDLE SPEE

Chuck: 6"

Bethlehem, PA
View Listing

Okamoto Linear Model 618 6"X 18" Surface Grinder

$RFQ

No description providedGrinding Width Capacity6" Grinding Length Capacity18" Maximum Height Under Wheel to Table11" Maximum Longitudinal Table Travel8" Grinding Wheel Capacity8" x 1" x 1.25" Electrics460V Approx. Floor S

Table width: 6"
Table width: 6"
Table length: 18"

Ivyland, PA
View Listing

C-2 ACME Centerless Polisher, 1/8"-6" Dia. Cap, 6"W Whl, Thr

$RFQ

Serial No. 30040 New - 2013 SPECIFICATIONS: Working Capacity................................................1/8" - 6" Dia. Wheel Capacity - Maximum.........................................16" x 6&quo

Lincolnshire, IL
View Listing

6" X 18" KENT MODEL SGS618B MANUAL SURFACE GRINDER

$RFQ

6" X 18" KENT MODEL SGS618B MANUAL SURFACE GRINDER S/N 87H2B086 NEW 1987 CHUCK SIZE, STANDARD -------------------------- 6" X 18" MAXIMUM TRAVEL WIDTH X LENGTH

Table width: 6"
Table length: 18"

Des Plaines, IL
View Listing

16" Width 40" Length Kent KGS-410AHD, NEW 1986, AUTO IDF, 3-AXIS AUTO FEEDS, SUR

$RFQ

16" X 40" KENT SURFACE GRINDER (COLUMN TYPE) W/PROGRAMMABLE ELECTRONIC AUTOMATIC DOWNFEED MODEL: KGS-410AHD S/N: 86015623 NEW: 1986 MA

Harrison, NJ
View Listing

1999 CHEVALIER FSG-2A-1224H 2-AXIS HYDRAULIC SURFACE GRINDER, 12” X 24"

$RFQ

SPECIFICATIONS TABLE SIZE: 12” X 24” GRINDING LENGTH: 24" GRINDING WIDTH: 12" DISTANCE (SPINDLE CENTER TO TABLE SURFACE): 24-3/4" LONGITUDINAL MOVEMENT OF TABLE LONGITUDINAL TRAVEL, HYDRAULIC:

Table width: 12"
Table length: 24"

Bethlehem, PA
View Listing

1988 K. O. LEE MODEL BA960 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"

$RFQ

SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 22" DISTANCE BETWEEN WORKHEAD AND TAILSTOCK CENTERS: 16" DISTANCE BETWEEN WORKHEAD COLLECT AND TAILSTOCK: 17" DISTANCE BETWEEN B946 CHUCK FACE AND

Bethlehem, PA
View Listing

3" Dia. Oliver 600, NEW '79, "AIR-DRAULIC" AUTO INFEED, NEW 1979 DRILL GRIN

$RFQ

OLIVER DRILL GRINDER W/"AIRDRAULIC" AUTOMATIC INFEED MODEL: 600 S/N: G-8205 NEW: 1979 &nbs

Harrison, NJ
View Listing

40" Swing Heald 172, MACHINE WAS UPGRADED REBUILT RECENTLY ID GRINDER, 7.5K RPM I.D.

$RFQ

HEALD #172 ID GRINDER S/N: 19746 40" SWING, 7,500 RPM SPINDLE, 28" FACE PLATE, 5 HP, FREQ DRIVE, DRESSER, SWIVEL HEAD, REBUILT Maximum Swing Inside Chuck Guards:................ 39" Fa

Harrison, NJ
View Listing

Butler Newell CNC Hollow Spindle Internal Grinder

$RFQ

Butler Newell CNC Hollow Spindle Internal Grinder S/N: CNC 4069, Mfg 1988, Stock No: 17641 Model ICG100 2005 Retofitted With Fanuc Hydrastatic Headstock (2) 40" 4-Jaw Chucks 16" Thru Hole 24' Bar Fee

Nashville, TN
View Listing

KO Lee Model S714 Surface Grinder

$RFQ

No description providedMotor1 HP Electrics230V / 60 Hz / 3 Phase Walker Magna Lock 510CL Electric Chuck (5" x 10") One Shot Lube Motor is Dual Wo

Ivyland, PA
View Listing

6" X 18" BROWN & SHARPE MICROMASTER HYDRAULIC SURFACE GRINDER

$RFQ

6" X 18" BROWN & SHARPE MICROMASTER HYDRAULIC SURFACE GRINDER MODEL 618 MICROMASTER S/N 523-6181-4177 NEW 1968 WIDTH AND LENGTH OF WORK GROUN

Table width: 6"
Table length: 18"

Des Plaines, IL
View Listing

6" X 18" BROWN & SHARPE MICROMASTER HYDRAULIC SURFACE GRINDE

$RFQ

6" X 18" BROWN & SHARPE MICROMASTER HYDRAULIC SURFACE GRINDER MODEL 618 MICROMASTER S/N 523-6181-3058 NEW 1966 WIDTH AND LENGTH OF WORK GROUN

Table width: 6"
Table length: 18"

Des Plaines, IL
View Listing

42" Chuck 100HP Spindle Blanchard 22HD-42, GEARED HEAD 100 H.P. SPINDLE, ROTARY SURFA

$RFQ

42" BLANCHARD ROTARY SURFACE GRINDER ** GEARED HEAD HIGH HP DESIGN ** MODEL No. 22HD-42 Year: 1974 Serial Number: 14253 Specifications 42" Magnetic Chuck 48" Swing In

Harrison, NJ
View Listing

1972 JONES & SHIPMAN MODEL 1300 ID/OD CYLINDRICAL GRINDER, 10" x 2

$RFQ

SPECIFICATIONS MAXIMUM SWING: 10" DISTANCE BETWEEN CENTERS: 27" TABLE SWIVEL INCLUDED ANGLE (CLOCKWISE): 18 DEGREES TABLE SWIVEL INCLUDED ANGLE (ANTICLOCKWISE): 16 DEGREES LONGITUDINAL TABLE SPEED (HY

Swing: 10"
Centers: 27"

Bethlehem, PA
View Listing

Weiler Grinder

$RFQ

Weiler Mdl. 1668 Grinder with top mounted stainless steel hopper, stairs with platform, 50 h.p. grinder motor, 11" plate, stainless steel barrel, auger and ring, 1992-5HA gearbox, Weiler stainless steel auger puller

Westlake Village, CA
View Listing

12" X 40" TOYODA #GU4-100 CNC UNIVERSAL CYLINDRICAL GRINDER

$RFQ

PREOWNED 12" X 40" TOYODA #GU4-100 CNC UNIVERSAL CYLINDRICAL GRINDER S/N RC7490 NEW 1999 CNC CONTROL -------------------------------------- TOYODA GC-32

Swing: 12"
Centers: 40"

Des Plaines, IL
View Listing

12" X 24" CHEVALIER AUTOMATIC UNIVERSAL CYLINDRICAL GRINDER, MO#

$RFQ

12" X 24" CHEVALIER AUTOMATIC UNIVERSAL CYLINDRICAL GRINDER MODEL CGP-1224 S/N 3260147 NEW 2007 MAXIMUM SWING OVER BED --------------------

Swing: 12.5"
Centers: 23.6"

Des Plaines, IL
View Listing

25" ICHIKAWA VERTICAL SPINDLE ROTARY SURFACE GRINDER, MODEL IBC800

$RFQ

25" ICHIKAWA VERTICAL SPINDLE ROTARY SURFACE GRINDER MODEL IBC800 S/N 801629 NEW 1988 CHUCK SIZE ---------------------------------------- 25.5"

Chuck: 25.5"

Des Plaines, IL
View Listing

STUDER S33 3.9"SWING,39.4"CC,C-AXIS,AUTO-B-AXIS,I.D.SPINDLE,FANUC

$RFQ

STUDER S33 CNC UNIVERSAL GRINDER Specifications: Center Height .......................... 6.890" Center Distance ........................ 39.370" Weheelhead Axis X (NC-Axis) 0 Deg. Drive By Ac-Servo, M

Swing: 14"
Centers: 40"