buy & sell, new & used machinery, machine tools & equipment

Woodworking Equipment > Used

Used Woodworking Equipment For Sale

445 used woodworking equipment items for sale
1 | 2 | 3 | 4 | 5
Refine: Viewing 201 - 300 of 445 matches
Sort by:
Items Per Page:  20 |  50 |  100
Mereen Johnson 424 gang rip saw
$28,000
Mereen Johnson 424 gang rip saw
Refurbished Mereen Johnson 424 DC gang rip saw with laser stand and lights. Feed chain in very good condition. Chain pins are round. New rubber inserts. 75 h.p.arbor motor. Feed motor has been updated to VFD with speed
Mereen Johnson 424 gang rip saw
$28,000
Mereen Johnson 424 gang rip saw
Refurbished Mereen Johnson 424 DC gang rip saw with laser stand and lights. Feed chain in very good condition. Chain pins are round. New rubber inserts. 75 h.p.arbor motor. Feed motor has been updated to VFD with speed
Mereen Johnson 424 gang rip saw
$28,000
Mereen Johnson 424 gang rip saw
Refurbished Mereen Johnson 424 DC gang rip saw with laser stand and lights. Feed chain in very good condition. Chain pins are round. New rubber inserts. 75 h.p.arbor motor. Feed motor has been updated to VFD with speed
Vise Bench 7" Columbian
$99
Vise Bench 7" Columbian
Vise Bench 7" Columbian Model: 7-CD [Columbian]
Everett Cut-Off Saw
$RFQ
Everett Cut-Off Saw
Voltage: 208/220/440<br />Mounted on Bench
AIR FLOW SYSTEMS AIR FILTER
$2,450
AIR FLOW SYSTEMS AIR FILTER
AIR FLOW SYSTEMS AIR FILTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,450.00 HMC Stock # 20063-P Machine Serial No.: 105114 Machine Model No.: T140-STD-PG3-EB-SP New Date: Jan. 2015 This unit is designe
Clamp Bar 40"/60" KBody
$59
Clamp Bar 40"/60" KBody
Clamp Bar 40"/60" KBody Model: Various 40" or 60" [Bessey]
Lathe 12"x36" w/stand-General
$1,999
Lathe 12"x36" w/stand-General
Lathe 12"x36" w/stand-General Model: 260 [General] S/N: G4191 12" x 36" Lathe; Reverse/Variable Speed; Stand; 6" Face Plate; Live Center 1Hp; 1Ph; 230Volt
JTAS10-122
$37
JTAS10-122
JTAS10-122 Bracket Motor for Right Tilt
30-5107
$60
30-5107
30-5107 Bracket Performax
Clamp Bar 40" KBody Bessey
$59
Clamp Bar 40" KBody Bessey
Clamp Bar 40" KBody Bessey Model: KR3.540 [Bessey] 40" KBody Clamp
Router Table/Cabinet w/Router
$299
Router Table/Cabinet w/Router
Router Table/Cabinet w/Router Model: Custom Table; 060 Router [Bosch] S/N: 1905439 Router Table/Stand/Cabinet w/Bosch Router 10Amp; 1Ph; 120Volt
Straight line rip, Raimann KM US BV 2001 Ser 26883
$16,500
Straight line rip, Raimann KM US BV 2001 Ser 26883
Great condition Raimann Gang Rip Straight line rip saw no longer needed for production, 14'' arbor with hydro lock blades , Dip Chain, Chain is almost like new
2500 cfm Tepco #2500B, air cleaner smog eater, cell & ionizer assemblies, fan, housing cab
$850
2500 cfm Tepco #2500B, air cleaner smog eater, cell & ionizer assemblies, fan, housing cab
no description provided
1000 cfm Smog Hog #SH10-PE, dust collector, 6" inlet diameter, #6608
$650
1000 cfm Smog Hog #SH10-PE, dust collector, 6" inlet diameter, #6608
no description provided
Lathe Tool Holder
$175
Lathe Tool Holder
Lathe Tool Holder Model: 2063011 [Powermatic]
15" X Axis 31" Y Axis Sharp TMV/MP-3 NEW CNC MILL-VMC, 3-Axis MILLPWR-G2, 10x50
$RFQ
15" X Axis 31" Y Axis Sharp TMV/MP-3 NEW CNC MILL-VMC, 3-Axis MILLPWR-G2, 10x50
NEW SHARP CNC VERTICAL KNEE MILL MODEL: TMV/MP-3 FEATURES: Vertical Knee Mill with MILLPWR-G2 3 axes (table,saddle and quill) CNC System by Acu-Rite Digital Servo drive systems for X, Y, and Z axes travel Able to
15" X Axis 31" Y Axis Sharp TMV/MP-2 NEW CNC MILL-VMC, 2-Axis MILLPWR-G2, 10x50
$RFQ
15" X Axis 31" Y Axis Sharp TMV/MP-2 NEW CNC MILL-VMC, 2-Axis MILLPWR-G2, 10x50
NEW SHARP CNC VERTICAL KNEE MILL MODEL: TMV/MP-2   FEATURES: Vertical Knee Mill with MILLPWR-G2 3 axes (table,saddle and quill) CNC System by Acu-Rite Digital Servo drive systems for X, Y, and Z axes travel
11" X Axis 32" Y Axis Sharp LMV-50/MP-3 NEW CNC MILL-VMC, 3-axis, 9'x50"tbl
$RFQ
11" X Axis 32" Y Axis Sharp LMV-50/MP-3 NEW CNC MILL-VMC, 3-axis, 9'x50"tbl
NEW SHARP CNC VERTICAL KNEE MILL MODEL: LMV-50/MP-3   FEATURES: Vertical Knee Mill with MILLPWR-G2 3 axes (table,saddle and quill) CNC System by Acu-Rite Digital Servo drive systems for X, Y, and Z axes trave
11" X Axis 32" Y Axis Sharp LMV-50/MP-2 NEW CNC MILL-VMC, Acu-Rite Millpwr-G2 Co
$RFQ
11" X Axis 32" Y Axis Sharp LMV-50/MP-2 NEW CNC MILL-VMC, Acu-Rite Millpwr-G2 Co
NEW SHARP CNC VERTICAL KNEE MILL MODEL: LMV-50/MP-2       FEATURES: Vertical Knee Mill with MILLPWR-G2 2 axes (table, and saddle) CNC System by Acu-Rite Digital Servo drive systems for X, Y, and Z
Rockwell-Delta 34-450 10" Tilting Arbor Unisaw WOODWORKING, 10" Blade, Tilting A
$1,250
Rockwell-Delta 34-450 10" Tilting Arbor Unisaw WOODWORKING, 10" Blade, Tilting A
  10" ROCKWELL/DELTA TILTING ARBOR UNISAW MODEL: 34-450, S/N: DP5906   TILTING ARBOR TABLE EXTENSIONS 1 HORSE POWER DRIVE SINGLE PHASE ELECTRICS   INSPECT UNDER POWER IN OUR NEW JERSEY WAREHO
12" X Axis 6" Y Axis MULTI-CAM MG 305 CNC ROUTER, Multi-Cam Cntrl, 5 HP Colombo
$16,500
12" X Axis 6" Y Axis MULTI-CAM MG 305 CNC ROUTER, Multi-Cam Cntrl, 5 HP Colombo
MULTICAM 80" x 144" CNC ROUTER MODEL: MG305,   S/N: MG30541892,   MFG:  2000    SPECIFICATIONS: TABLE SIZE............................ 80" X 144" LONGITUDINAL T
R Bit Rsd Pnl 3-3/8x1/2 Amana
$79
R Bit Rsd Pnl 3-3/8x1/2 Amana
R Bit Raised Panel 3-3/8 x 1/2 Amana Model: 54117 [Amana]
THERMWOOD MODEL 40 3-AXIS CNC ROUTER
$RFQ
THERMWOOD MODEL 40 3-AXIS CNC ROUTER
THERMWOOD MODEL 40 3-AXIS CNC ROUTER<br /> <br /> New 1997<br /> <br /> EQUIPPED WITH: Thermwood CNC Controls, Vacuum Pump, Siemens Servo Drive Motors, 10 HP, 18,000 RPM Main Spindle, 5 HP, 15,000
TORIT MODEL 64 DUST COLLECTOR, 400 CFM
$350
TORIT MODEL 64 DUST COLLECTOR, 400 CFM
TYPE: CABINET/FILTER STYLE CFM: 400 CFM INPUT HOSE: 4” MOTOR: 3/4 HP DIMENSIONS: 22" LR X 24" FB X 33" H
  • Motor: 0.75HP
    2018 HOMAG MODEL SWT-335-QCH THREE HEAD WIDE BELT SANDER, 54” BELT
    $RFQ
    2018 HOMAG MODEL SWT-335-QCH THREE HEAD WIDE BELT SANDER, 54” BELT
    Ideal for veneer, lacquer, solid wood, high gloss, solid surface & special effect sanding. SPECIFICATIONS SANDING HEADS: 3 SANDING WIDTH: 53” ABRASIVE BELT: 54”X 103” WORKING THICKNESS: 1/8” – 6.25” FEED S
    Used Master Oscillating Spindle Sander
    $2,500
    Used Master Oscillating Spindle Sander
    Used Master Oscillating Spindle Sander. Spindle Tilts 0 - 45 degrees. Variable spindle speed. 230 volt, 3 phase.
    Used Powermatic 18" Planer Model 180
    $7,500
    Used Powermatic 18" Planer Model 180
    Used Powermatic 18" Planer Model 180 SN. 88807250 7.5 HP, 208-230/460 volt, presently wired 208-230 Knife grinding attachment included
    Used Yates American 12" Jointer
    $3,500
    Used Yates American 12" Jointer
    Used Yates American 12" Jointer. Model #1 SN. R-2310 4 Knife Cutter Head 220 Volt, 3 Phase
    Used Original 16" Metal Cutting Saw
    $12,900
    Used Original 16" Metal Cutting Saw
    Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
    Used Original 16" Metal Cutting Saw
    $12,900
    Used Original 16" Metal Cutting Saw
    Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
    Used Brandt Optimat KD 78/2C
    $14,995
    Used Brandt Optimat KD 78/2C
    Used Brandt Optimat KD 78/2C Edgebander. Year: 2000 230v., 3 Phase Laminate, wood, PVC 3mm capable. Pellet hot melt glue Auto feed, front & End trimmers Top/Bottom trimmers Top/Bottom profile trimmers Co
    Delta/Rockwell 34-350
    $2,495
    Delta/Rockwell 34-350
    12"/14" blade 1" arbor 5hp 3ph
    Sliding Table 26"X30" W/54" EX
    $549
    Sliding Table 26"X30" W/54" EX
    Sliding Table 26"X30" W/54" Fence Excaliber Model: 50-SLT40P (Excaliber) For 10" Table Saw
    Striebig compact Panel Saw
    $RFQ
    Striebig compact Panel Saw
    Compact Panel Saw The Compact Vertical Panel Saw delivers legendary Striebig accuracy at a compact price. . Cuts up to 5' x 10' panels . Free standing, one-piece fully welded frame . Heavy-duty support ro
    Used Rockwell 6" Jointer, Model 37-200
    $1,100
    Used Rockwell 6" Jointer, Model 37-200
    Used Rockwell 6" Jointer, Model 37-200. SN 300454, 3/4 HP, 115 VOLT. Factory original Retractable Casters.
    Used Delta 18" Radial Arm Saw, Model 33-062
    $5,975
    Used Delta 18" Radial Arm Saw, Model 33-062
    Used Delta 18" Radial Arm Saw, Model 33-062. 7.5 HP, 230/460 Volt (wired 230V) 3PH. Factory Origninal Electronic Brake. SN 91L72414
    Everett Cut Off Saw
    $RFQ
    Everett Cut Off Saw
    No description providedElectrics208-230/460 Volt / 3 Phase Motor3 HP With Stand<br />Non - Miter
    DeWalt Radial arm saw, older Cast Iron
    $1,250
    DeWalt Radial arm saw, older Cast Iron
    Used working 3 phase, can be rewound to singe phase, add a phase converter, or freq drive to run on single phase electricity.
    2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
    $RFQ
    2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
    SPECIFICATIONS MAXIMUM WORKING WIDTH: 50” MAXIMUM WORKING THICKNESS: 6.2” BELT MEASUREMENT: 86” X 51” MINIMUM WORKING LENGTH: 11-3/4” MAIN MOTOR: 30 HP FEEDING SPEED: 6.5 – 30 FPM GENERAL MACHINE DIMENSION
    2016 LAGUNA SMARTSHOP III CNC ROUTER WITH FANUC OiMF CONTROL, 5’ X 10”
    $RFQ
    2016 LAGUNA SMARTSHOP III CNC ROUTER WITH FANUC OiMF CONTROL, 5’ X 10”
    SPECIFICATIONS TABLE SIZE: 5” X 10” TOOL CHANGER: 8 POSITIONS Z-AXIS TRAVEL: 12” SPINDLE MOTOR: 12 HP SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: HSK-63F CUTTING SPEEDS: 1,600 IPM RAPID TRAVELS: 2,500 IPM GENE
    2001 Thermwood C40 CNC Router
    $19,900
    2001 Thermwood C40 CNC Router
    Specifications: Control ................................................................ 91000 Super Series Table Size ............................................................................... 8’ x 4’ X-Axis T
    Black Brothers #121, mechanical pre, 8' x4' bed, 43" max open, 125 psi, 5 HP, pedesta
    $9,500
    Black Brothers #121, mechanical pre, 8' x4' bed, 43" max open, 125 psi, 5 HP, pedesta
    no description provided
    Delta Unisaw 36-812
    $1,200
    Delta Unisaw 36-812
    3hp 1ph 220v w/ 52" unifence
    Used Oliver Model 299T 24" Planer With ITCH Spiral Head
    $11,500
    Used Oliver Model 299T 24" Planer With ITCH Spiral Head
    Used Oliver Model 299T 24" Planer With ITCH Spiral Head. 7.5 HP, 208-220/440 volt 24" wide capacity, 8" Max thickness Variable feed speed, 25 to 100 fpm Power driven adjustable height bed rollers Kn
    Hendricks Patriot Panel Saw
    $7,000
    Hendricks Patriot Panel Saw
    Large, great working, panel saw.
    SCMI Edgebander willing to negotiate price!! $5,000.00
    $5,000
    SCMI Edgebander willing to negotiate price!! $5,000.00
    SCMI Edgebander made in italy in good condition!
    200 Gal. 0HP Motor Koolant Koolers HAV 2000 COOLANT SYSTEM, 2 HP CHILLER, 1/2 HP PUMP
    $RFQ
    200 Gal. 0HP Motor Koolant Koolers HAV 2000 COOLANT SYSTEM, 2 HP CHILLER, 1/2 HP PUMP
    KOOLANT KOOLERS INC. COMBINATION COOLANT SYSTEM w/CHILLER PLUS FILTRATION MODEL:  HAV200     SERIAL NUMBER:  19690  MFG. LATE IN 2003INSTALLED EARLY 2004   2 HP COMP
    14" Width 13" Stroke Perfecto 500-14 PRESS FEED, Roll Feed
    $3,450
    14" Width 13" Stroke Perfecto 500-14 PRESS FEED, Roll Feed
    14" PERFECTO DOUBLE RACK & PINION ROLL FEED MODEL #500-14 NEW 1971 S/N FS-3976
    Knuth SSB 32Xn Column Drill Press DRILL PRESS
    $RFQ
    Knuth SSB 32Xn Column Drill Press DRILL PRESS
    NEW KNUTH MODEL: SSB 32Xn COLUMN DRILL PRESS   * 5 YEAR WARRANTY *   SPECIFICATIONS WORKING ARE: DRILLING CAPACITY................... 1.26" TAPPING CAPACITY, STEEL............. M 20 TABLE SET UP AR
    Cutter Shaper Finger Pull
    $10
    Cutter Shaper Finger Pull
    Cutter Shaper Finger Pull; Finger Pull for 3/4" Stock; 2-1/4" Diameter, 3/4" bore
    Cuttr Shpr Edge Profile
    $10
    Cuttr Shpr Edge Profile
    Cutter Shaper Edge Profile; 3-1/4" Diameter; 1-1/4" Bore
    Used Hammond DusKolector Model DK-1255
    $2,500
    Used Hammond DusKolector Model DK-1255
    Used Hammond DusKolector Model DK-1255. Ser# 13774. 10HP 230/460 volt 3 phase (wired 230) 25.6/12.8 amps. Cyclone style dust collector with single drum and Oneida 4 cartridge after filter with 2 drum storage. Approx
    Used Crouch/ Ritter Edge Sander Non-Oscillating
    $3,495
    Used Crouch/ Ritter Edge Sander Non-Oscillating
    Used Crouch/ Ritter Edge Sander Non-Oscillating. 7” x 148" Abrasive Belt Size Graphite Covered Platen 7.5 H.P. Abrasive Belt Drive Motor, T.E.F.C. 3,700 FPM Abrasive Belt Speed Swing Away Dust Hood With 6"
    Timesaver Wet Wide Belt Sander Model: Lynx 37 MWT DBB-60
    $44,995
    Timesaver Wet Wide Belt Sander Model: Lynx 37 MWT DBB-60
    Year: 2012 Make: Timesaver Model: Lynx 37 MWT DBB-60 Condition: Excellent Electrical: 460/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 12,000 lbs Dimension: L x W x H 10'x6
    Used Whitney S-205, 24" H Planer
    $18,000
    Used Whitney S-205, 24" H Planer
    Used Whitney S-205 Planer. - 24" width capacity - medium duty single surfacer for cabinet and specialty furniture industry; - heavy cast construction and all gear drive; - wedge bed vertical adjustment; - 5
    Used Berran Industrial Automatic Sleeve Wrapper Model DP-10040D
    $7,900
    Used Berran Industrial Automatic Sleeve Wrapper Model DP-10040D
    Used Berran Industrial Automatic Sleeve Wrapper Model DP-10040D. •Mitsubishi PLC control panel •Sealing time adjustable •Power belted discharge conveyor •Film unwind motorized •Product lengt
    Used Precision Husky 58" KWIK-CHIP Scrap Chipper
    $35,000
    Used Precision Husky 58" KWIK-CHIP Scrap Chipper
    Used Precision Husky 58" KWIK-CHIP Scrap Chipper. 58" diameter chipper head. 8-knife cutterhead, hardened steel anvil and knives, horizontal feed, top discharge. 150 HP motor and drive, PCS-88 Chip Screen wit
    Used Yates double surface roughing planer
    $65,000
    Used Yates double surface roughing planer
    Used Yates double surface roughing planer. CAPACITY Thickness: 3/4" - 4" • Width: 24" • Length: 46" Min. self-feed • Weight: 11,000 lbs. • Vacuum: (2) 9" dia. pipe, 7900
    Used Torit 19-FB-55 Dust Collector
    $1,500
    Used Torit 19-FB-55 Dust Collector
    Used Torit Model 19-FB-55 Dust Collector. 3 phase, 208-220/440 volt, 60 cy. 3490 rpm 2 HP. 1200 CFM. 6" inlet. 8" outlet. Serial number 45490.
    Used Cefla TCF 404 Finishing Line
    $325,000
    Used Cefla TCF 404 Finishing Line
    Used Cefla Finishing Line TFC 404.The following equipment is included: Cefla TNS-3650-RBT TCF 404 Infeed Loading Conveyor. S/N 06010/52. Belt size: 54" W x 12' L. Cefla GT180/5487/133/S TCF 404 Infeed Transfe
    AAF TYPE N ROTOCLONE WET TYPE COLLECTION SYSTEM ( HYDROSATIC PRECIPITATOR)
    $RFQ
    AAF TYPE N ROTOCLONE WET TYPE COLLECTION SYSTEM ( HYDROSATIC PRECIPITATOR)
    AAF TYPE N ROTOCLONE WET TYPE COLLECTION SYSTEM ( HYDROSATIC PRECIPITATOR ) S/N N860039 ARRANGEMENT B, SIZE 2.5 CLEANS THE AIR BY THE COM
    Mikron M652R horizontal cutting head moulder
    $15,000
    Mikron M652R horizontal cutting head moulder
    Mikron M652R horizontal cutting head moulder with tilting arbour and interchangeable router. Auto-feed with 7hp 3phase power. I am original owner and never used machine for full production. Have extra cutterhead and
    16' x 32' x 10' PAINT BOOTH SYSTEM
    $RFQ
    16' x 32' x 10' PAINT BOOTH SYSTEM
    Paint Booth System Dimensions - 16' x 32' x 10' Currently Installed in USA Plant
    year 2000 Northwood CNC Router
    $29,500
    year 2000 Northwood CNC Router
    Northwood CNC Router , Fanuc 21i-M, Model NW 255, 2 - 18-24K Spindles, 2 Toolchangers, 2 5' independent tables, 40HP Vacuum Pump, 2000,
    SCMI selecta 12 ,an/010468,ref.061207
    $19,000
    SCMI selecta 12 ,an/010468,ref.061207
    Great machine, high production,several replacement parts,. .018mm up to 3mm, solid lumber strips.
    Kalamazoo DCV-1 Dust Collector
    $1,250
    Kalamazoo DCV-1 Dust Collector
    Kalamazoo DCV-1 Dust Collector General Specifications: DCV-1 dust collector is great for collecting all forms of metal particles and dust! • Replaceable dust bag. • 6″ vacuum port. • Dust collector for dry hea
    Scroll Saw 20" w/FootSwtch RBI
    $699
    Scroll Saw 20" w/FootSwtch RBI
    Scroll Saw 20" w/FootSwtch RBI; Model: 220-3 [RBI]; S/N: 10664; w/Foot Switch, Blade Changer, Extra Blade Barrels; 1/8hp, 1ph, 120volt
    Torit Model 24-FM Cyclone Dust Collector
    $650
    Torit Model 24-FM Cyclone Dust Collector
    480v 60cycle 3ph 9.2amps 3495rpm 7.5hp with 8.5 cu. ft. dust drawer Includes all pipe, blast gates and floor sweeps pictured
    Miter Table 12" x 48" - Biesemeyer
    $179
    Miter Table 12" x 48" - Biesemeyer
    Miter Saw Table 12" x 48"; Model: 79804 [Biesemeyer]
    DoAll 16 X 16 Model CJ410A Horizontal Band Saw, 2001 SN: 88-01542
    $14,500
    DoAll 16 X 16 Model CJ410A Horizontal Band Saw, 2001 SN: 88-01542
    DoAll 16 X 16 Model CJ410A Horizontal Band Saw, 2001 SN: 88-01542 Specifications: Full automatic Volt, 3 Ph, 60 Hz 1-1/2” blade Equipped With Coolant Lamp Chip conveyor Condition: Good
    KOMO VR 510TG (2010)
    $RFQ
    KOMO VR 510TG (2010)
    KOMO VR 510TG (2010)
    Torit Dust Collector
    $RFQ
    Torit Dust Collector
    No description provided
    C. R. Onsrud Model 3025 Inverted Pin Router Tooling Woodworking
    $2,185
    C. R. Onsrud Model 3025 Inverted Pin Router Tooling Woodworking
    CR Onsrud model 3025 inverted router, SN 30449, 30″ throat, 5HP 3-phase 230v motor, 1/4″, 3/8″, 5/16″ and 1/2″ collets, 20000rpm spindle, pneumatically retracting cutter and guide pin, lubrication system for spindle bear
    CNC ROUTER WITH TOOL CHANGER (2011)
    $RFQ
    CNC ROUTER WITH TOOL CHANGER (2011)
    CNC ROUTER WITH TOOL CHANGER (2011)
    CMS NC-PF 111-6T+6M
    $RFQ
    CMS NC-PF 111-6T+6M
    CMS NC-PF 111-6T+6M
    Powermatic #72 Table Saw
    $RFQ
    Powermatic #72 Table Saw
    Powermatic #72 Table Saw
    POWERMATIC "72" TABLE SAW (1972)
    $RFQ
    POWERMATIC "72" TABLE SAW (1972)
    POWERMATIC "72" TABLE SAW (1972)
    Thermwood 5 Axis CNC Router
    $RFQ
    Thermwood 5 Axis CNC Router
    Thermwood 5 Axis CNC Router
    Ruether 5 Axis CNC Router
    $RFQ
    Ruether 5 Axis CNC Router
    Ruether 5 Axis CNC Router
    Robland X31
    $2,500
    Robland X31
    Table saw, joiner, planer, shaper, mortiser
    C.R. ONSRUD MODEL F122HD15
    $RFQ
    C.R. ONSRUD MODEL F122HD15
    Dual FIVE-AXIS Extreme Duty Series (62″X122” axis travel) – with: Thick Cast-Iron Fixed Bridge & Cast Iron Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed Brid
    5" X 7" Kalamazoo Model #350A Automatic Cold Saw
    $RFQ
    5" X 7" Kalamazoo Model #350A Automatic Cold Saw
    No description providedBlade Speed1800 & 3600 PM Capacity Rounds4-3/4" Left or Right Capacity Rounds @ 45 Degrees4-1/2" Capacity Rectangles3-1/2" x 7-1/2" Capacity Square @ 45 Degrees4" Motor3 HP
    C.R. ONSRUD 122C18 SUPER DUTY CNC ROUTER
    $RFQ
    C.R. ONSRUD 122C18 SUPER DUTY CNC ROUTER
    “Super Duty Series” CNC Router 5 x 10 (Twin 5 x 5 foot tables), OSAI PC Front Series 10/510i controller; Automatic Lubrication; 12 position tool changer, Aggregate 13th position tool holder, Nine Spindle Drill
    CR Onsrud 5' x 12' 3 Axis CNC Router (2006)
    $RFQ
    CR Onsrud 5' x 12' 3 Axis CNC Router (2006)
    Description: 5' x 12' vacuum table 16 HP spindle 3 Vacuum zones 12-position tool changer (3) Becker vacuum pumps on a stand Extra Collets and Chucks Voltage: 440V, 60Hz, 3Ph
    12" Delta Radial Arm Saw
    $1,131
    12" Delta Radial Arm Saw
    See photos for details. Saw is located in Newtown, CT
    2002 AIRFLOW SYSTEMS MODEL DT-3000VS DOWNDRAFT TABLE, 66.25” X 42”
    $RFQ
    2002 AIRFLOW SYSTEMS MODEL DT-3000VS DOWNDRAFT TABLE, 66.25” X 42”
    SPECIFICATIONS TABLE SIZE: 66.25” X 42” CONSTRUCTION: 10GA WELDED STEEL DOWNDRAFT VELOCITY: 155 FPM GENERAL DIMENSIONS: 70” LR X 48” FB X 33” H WEIGHT: 850 LBS MOTOR: 5 HP ELECTRICS: 460 VOLTS, 3 PH, 60 CYC
    • Motor: 5HP
      C.R ONSRUD MODEL 148E24 "Extreme Series" CNC ROUTER (new in 2014)
      $220,000
      C.R ONSRUD MODEL 148E24 "Extreme Series" CNC ROUTER (new in 2014)
      C.R ONSRUD MODEL 148E24 "Extreme Series" CNC ROUTER with: F.E.A. Heavy Weldment Fixed Bridge & Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed
      Giben Beam Saw For Sale
      $RFQ
      Giben Beam Saw For Sale
      Giben Model Smart sp Purchased 2004, one owner, maintained and in good condition. Giben beam saw for sale to best offer. You will need to have the equipment to load and remove from our commercial building locating
      3/8" radius Cove Router Bit by Amana
      $39
      3/8" radius Cove Router Bit by Amana
      3/8" radius Cove Router Bit by Amana. Model 49114. 1-1/8"diam x 9/16"h x 1/2" shank
      Spiral Molder Cutter Head by Lin Ruey Knifware Ind
      $149
      Spiral Molder Cutter Head by Lin Ruey Knifware Ind
      Spiral Molder Cutter Head by Lin Ruey Knifware Ind. Measures 5" diam x 6" ht. 40mm bore. Has 36ct 15mm x 15mm knives.
      Spiral Molder Cutter head
      $149
      Spiral Molder Cutter head
      Spiral Molder Cutter head. Measures 6" diam x 3" ht. 40mm bore. With 24 ct 15mm x 15mm knives.
      Shaper Cutter by Rockwell
      $29
      Shaper Cutter by Rockwell
      Shaper Cutter by Rockwell. Drawer Lock profile. Model EC240. 2-5/8" x 3/4" with 3/4" bore.
      Electric Stapler/Nailer by Ace Hardware
      $15
      Electric Stapler/Nailer by Ace Hardware
      Electric Stapler/Nailer by Ace Hardware. Model 22087. 10amp, 1phase, 120V.
      Leather marking/spacing tool by Craftool Co
      $19
      Leather marking/spacing tool by Craftool Co
      Leather marking/spacing tool by Craftool Co. Model 16-7. 5-1/2" long; 5/8" wheel.
      Fishing Rod Winder Clamp for guide repairs
      $39
      Fishing Rod Winder Clamp for guide repairs
      Fishing Rod Winder Clamp for guide repairs. Model 20 by Herter's.
      Drawer slide
      $1
      Drawer slide
      Undermount drawer slides; various sizes from 10" - 15"
      Drawer Slide 16" Brown
      $1
      Drawer Slide 16" Brown
      16" Epoxy coated Drawer Slide; brown [actual price is $1.50 per set]
      7-1/2" x 24T Carbide tipped saw blade by Irwin
      $10
      7-1/2" x 24T Carbide tipped saw blade by Irwin
      7-1/2" x 24T Carbide tipped saw blade by Irwin. Price per each.
      Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths
      $50
      Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths
      MK Morse Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths.
      Categories:
      Condition:
      • X Used (445)
      Manufacturer:
      Location:
      Price:
      •  to 
      1 | 2 | 3 | 4 | 5