buy & sell, new & used machinery, machine tools & equipment

Woodworking Equipment > Drill Presses > Used

Used Drill Presses For Sale

59 used drill press items for sale
1 | 2
Refine: Viewing 1 - 50 of 59 matches
Sort by:
Items Per Page:  20 |  50  |  100
Drill Press 17" FM ShopFox
$699
Drill Press 17" FM ShopFox
Drill Press 17" FM ShopFox Model: W1680 [Shop Fox] S/N: 12374 17" Floor Mount 12 Speed Drill Press 1Hp; 1Ph; 110/220Volt
Drill Press 20" FM Craftsman
$799
Drill Press 20" FM Craftsman
Drill Press 20" FM Craftsman Model: 137.229200 [Craftsman] S/N: RFP3099 20" Floor Model w/Custom Table, Mobile Base, Fence, 3/4" Chuck; 12 Speed 2Hp; 1Ph; 120Volt
Drill Press 17" w/MrtAttch-Jet
$799
Drill Press 17" w/MrtAttch-Jet
Drill Press 17" w/MrtAttch-Jet Model: 354169R JDP-17MF [Jet} S/N: 0020908 17" Drill Press w/Mortising Attachment 3/4Hp; 1Ph; 115/230Volt
Drill Press Rdl Arm 1/3hp Rkn
$449
Drill Press Rdl Arm 1/3hp Rkn
Drill Press Rdl Arm 1/3hp Rkn Model: 30-250 [Rikon] S/N: 0431Q0064 Radial Arm Drill Press; 10" - 32"; 5-Speed 1/3Hp; 1Ph; 120Volt
Drill Press 17" FM 16Sp CM
$349
Drill Press 17" FM 16Sp CM
Drill Press 17" FM 16Sp CM Model: 43389 [Central Machinery] S/N: 0511040061 17" Floor Mount 16 Speed Drill Press 1Hp; 1Ph; 120Volt
20" IBARMIA / CLAUSING DRILL PRESS
$RFQ
20" IBARMIA / CLAUSING DRILL PRESS
order 99999 MODEL #:  TL-25 SERIAL #:  043299 3 MT SPINDLE TAPER 2.4
39 Ton Used APMC Hydraulic Traveling Head Press (Great Condition) (Guaranteed by Dealer Of
$19,900
39 Ton Used APMC Hydraulic Traveling Head Press (Great Condition) (Guaranteed by Dealer Of
Great for multiple projects. The traveling head clicker press allows for one operator to remove parts while the other sets up for the next punch. Whether you are looking for an additional cutting machine, a replacement
27 Ton Used APMC Swing Head Hydraulic Clicker Press (Guaranteed By APMC Dealer), Mdl. APM-
$7,750
27 Ton Used APMC Swing Head Hydraulic Clicker Press (Guaranteed By APMC Dealer), Mdl. APM-
Tonnage 27 Ton Bed Size 20" x 40" Ram Area 20" x 24" Beam Size 20" Head Type Swing Cutting Pad 1" Max. Stroke 3.54" Max. Open Daylight 5.1" Horsepower 2 Dimension (W x L x H) 40"x40"x60"
175 Ton Used Columbus Industries Model Trimmer 4 Post Hydraulic Trim Press, Mdl. Trimmer,
$37,500
175 Ton Used Columbus Industries Model Trimmer 4 Post Hydraulic Trim Press, Mdl. Trimmer,
Maximum Tonnage 175 Tons Cutting Strokes 25 Type 4 Post Trims Flanges Of Part-Maximum Height 10" Total Cycle Time For Cocmplete Trim In Seconds 5 - 6 Die Space: Minimum Shut Height 5.75" Maximum
5 Tons Used Dake Ratchet Arbor Press, Mdl. 3A, #A7462
$RFQ
5 Tons Used Dake Ratchet Arbor Press, Mdl. 3A, #A7462
Tonnage 5 Max. Diameter of Work 20" Capacity Over Table 16" Capacity Over Table Plate 14 1/2" Ram Size & Length 2" x 2" x23" Leverage Ratio 55- 1 WEIGHT 750 Lbs. None
30 Ton x 4" Used Energo 4 Column Hydraulic Press (BRAND NEW NEVER USED) Great for Pre
$7,995
30 Ton x 4" Used Energo 4 Column Hydraulic Press (BRAND NEW NEVER USED) Great for Pre
Capacity 30 Ton x 4" Stroke 4" Work Table 23" x 15" Minimum Thickness of Die 5.9" Front Opening Between Columns 16" Table Speeds Maximum Opening Between Tables 11" Maximum Air Pressure 2,175 PSI
530 Ton Used French Oil Mill Machinery Hydraulic Molding Press, Heavy Duty Hydraulic Press
$25,000
530 Ton Used French Oil Mill Machinery Hydraulic Molding Press, Heavy Duty Hydraulic Press
Tonnage 530 Bed Size 36" x 48" Ram Size 36" x 48" Daylight 9" Distance Between Uprights 52" Maximum Opening Without The Upper And Lower Bolsters 36" Approximate Stroke 20" Pedestal Control Se
5 Ton x 6" Used Greenerd Arbor Press, Mdl. 3B, #P1033
$950
5 Ton x 6" Used Greenerd Arbor Press, Mdl. 3B, #P1033
What is a Greenerd Arbor Press Used For?Press-Fitting: Arbor presses are commonly used for press-fitting operations. They can be used to press bearings, bushings, pins, and other components into or out of a workpiece. T
8 Tons Used Haeger Hardware Insertion Press, Mdl. 824-1L, Bowl Feeder, Tooling, Year(1998)
$21,500
8 Tons Used Haeger Hardware Insertion Press, Mdl. 824-1L, Bowl Feeder, Tooling, Year(1998)
Max. Force 8 Ton Throat Depth 24" Throat Height 15" Stroke Length 0"- 8" Vertical Upstroke 1/2"- 8" Oil Tank Reservoir 18 Gallons WEIGHT 1,750 Lbs. Bowl Feeder Tooling
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
$50
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
Stroke 12 Ton None
60 Ton Used Questa Clicker Press (Hydraulic) Large Bed Sliding Table Press, Mdl. Model ARE
$39,500
60 Ton Used Questa Clicker Press (Hydraulic) Large Bed Sliding Table Press, Mdl. Model ARE
Tonnage 60 Bed Area 40" x 65" WEIGHT 12,000 LBS Sliding Table Safety Light Curtains
75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Produc
$29,500
75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Produc
NOTE:  NO FEEDER, CONVEYOR or REELS INCLUDED. Capacity 75 Ton Bed Size (F-B, L-R) 32" x 67" Head Type Full Head Tray Height 39" Stroke (Adjustable) 6.8" Daylight Opening 1.5" - 8.3" Down Stro
Drill Press 15" FM 1hp Crftsmn
$299
Drill Press 15" FM 1hp Crftsmn
Drill Press 15" FM 1hp Crftsmn Model: 113.12150 [Craftsman] S/N: 86827 15" Floor Model w/1/2" Chuck; 6" Quill Strock; Two Tables 1Hp; 1Ph; 115/230Volt
USED CINCINNATI 21" SLIDING HEAD FLOOR STANDING DRILL PRESS, MODEL 21, Stock# 10900
$RFQ
USED CINCINNATI 21" SLIDING HEAD FLOOR STANDING DRILL PRESS, MODEL 21, Stock# 10900
Brand: CincinnatiModel: 21Drilling capacity cast iron: 1-1/2"Distance dovetail to spindle center: 10-5/8"Spindle travel: 9-1/4"Spindle speeds: 75 - 295 R.P.M. low / 390 - 1530 R.P.M. HiVertical adjustment sliding head: 8
Shopsmith Mark V Horizontal Drill Press
$RFQ
Shopsmith Mark V Horizontal Drill Press
SHOPSMITH MARK V HORIZONTAL DRILL PRESS Model MARK V, Stock # K14954 NOTE: Very Versatile Worktable that tilts, elevates and travels. SPECIFICATIONS: Drill Press accepts Diameter Shanks..... 5/64" - 1/2&quo
160 Ton Used Ying Lin Side Gap Frame Punch Press (Open Back Fixed Bed Press) with NEW CONT
$59,500
160 Ton Used Ying Lin Side Gap Frame Punch Press (Open Back Fixed Bed Press) with NEW CONT
Capacity 163 Ton Nominal Stroke 6 Slide block stroke 160 Number of stroke Fixed min-1 40 Number of stroke Variable (Optional) min-1 40-60 Max die set height (mm) 350 Die set height adjustment(mm) 80
321 Ton Used Ying Lin Side Gap Frame Punch Press, OBS press, Mdl. JZ21-315, high performan
$79,500
321 Ton Used Ying Lin Side Gap Frame Punch Press, OBS press, Mdl. JZ21-315, high performan
Capacity 321 Ton Nominal Stroke 10 Slide block stroke 200 Number of stroke Fixed min-1 30 Number of stroke Variable (Optional) min-1 25-35 Max die set height (mm) 430 Die set height adjustment(mm) 1
14 Ton x 14" Used Hydraulic H Frame Press, Mdl. -, Manual Control, Hydraulic Pump Mot
$3,750
14 Ton x 14" Used Hydraulic H Frame Press, Mdl. -, Manual Control, Hydraulic Pump Mot
Tonnage 14 Ton Stroke 14" Distance Between Housing 31" Voltage 220V / 3-Phase Manual Control Hydraulic Pump Motor Movable Table 14" STROKE Portable
105 Ton x 8" Used Verson Heavy Duty O.B.G. Press With Cushion and Variable Speed Driv
$26,500
105 Ton x 8" Used Verson Heavy Duty O.B.G. Press With Cushion and Variable Speed Driv
Tonnage 105 Ton Bed & Ram Size (L-R, F-B) 30" x 39" Stroke Per Minute (Variable) 0-35 SPM Cushion Capacity 17.7 Tons @100 PSI Dimensions (L x D x H) 60" x 112" x 140.5" WEIGHT 18,000 Lbs. Stroke
39 Ton Used Hydraulic H Frame Press, Mdl. N/A, #A6809
$950
39 Ton Used Hydraulic H Frame Press, Mdl. N/A, #A6809
Tonnage 39 None
50 Ton x 20" x 28" Contech Hydraulic Flat Bed Clicker Press With Auto Shuttle Ta
$17,500
50 Ton x 20" x 28" Contech Hydraulic Flat Bed Clicker Press With Auto Shuttle Ta
Tonnage 7- 50 Stroke 0"- 4" Bed & Ram Platen Size: 20" x 28" Max. Heated Platen Temperature: 335 Degrees F Dimensions (L x W x H) 94" x 76" x 85" WEIGHT 6000 LBS Horsepower 10 Voltage 460 Vol
60 Ton x 20" Used Greenerd Hydraulic Arbor Press, Mdl. H-60 AD 21, Foot Pedal, Pressu
$5,000
60 Ton x 20" Used Greenerd Hydraulic Arbor Press, Mdl. H-60 AD 21, Foot Pedal, Pressu
Tonnage 60 Stroke 20" Daylight 10" Table Size 6" x 67" Sub Table Size 8" x 39" Throat 18" Type H-Frame Horsepower 3 H.P. WEIGHT 4,000 Lbs. Foot Pedal Pressure Gauge
5 Ton x 02" Used Unipunch Air Over Hydraulic Deep Throat Press, Mdl. 1012-UP, Foot Op
$2,950
5 Ton x 02" Used Unipunch Air Over Hydraulic Deep Throat Press, Mdl. 1012-UP, Foot Op
Throat Depth 15 1/2" Table Size 15"(L to R) x 16 1/2" (F to B) Capacity 1/4" - 5/8" Hole Open Height To The Bolster 7" Bolster Thickness 1" Type C-Frame WEIGHT Foot Operated Air Controls R
8 Ton x 12" Used Hannifin Hydraulic Press, Mdl. OGF8B-8-2-2-PB6, Dual Palm Control, A
$7,950
8 Ton x 12" Used Hannifin Hydraulic Press, Mdl. OGF8B-8-2-2-PB6, Dual Palm Control, A
Daylight 17" Type C-Frame Horsepower 7.5 H.P. Dimension (W x L x H) 39" X 41" X 92" Weight (Lbs.) 3,500 Lbs. Pressure Gauge Dual Palm Control Air Oil Cooler Oil Filter
20 Ton x 14" Used Hannifin Hydraulic Press, Mdl. F101, Dual Hand Control, Pressure Ga
$8,500
20 Ton x 14" Used Hannifin Hydraulic Press, Mdl. F101, Dual Hand Control, Pressure Ga
Tonnage 20 Stroke 14" Daylight 17" Bed Size ( L-R, F-B ) 20" x 18" Ram Diameter 3 1/2" Hole in Bed 6" x 10" Throat 11" Type C-Frame Horsepower 5 H.P. Dimensions ( L x W x H ) 47" x 35" x 94
20 Tons J. Sandt Hydraulic Double Clicker Press " Load One Job, Remove From the Other
$9,950
20 Tons J. Sandt Hydraulic Double Clicker Press " Load One Job, Remove From the Other
Platen heads 18" x 29" Table 30" x 60" Dimensions ( L x D x H ) 70" X 36" X 65" WEIGHT 5,000 LBS None
100 Ton Used Eitel Heavy Duty Hydraulic Straightening Press, Mdl. RP100, Rolling Fixture W
$44,500
100 Ton Used Eitel Heavy Duty Hydraulic Straightening Press, Mdl. RP100, Rolling Fixture W
Tonnage 100 Ton Straightening Stroke 7/8" Daylight 38" Table Size 10 1/2" x 55" Throat Depth 13.75" Ram Speed 60 IPM Dimensions (L x W x H) 72" x 65" x 102" Horsepower 20 H.P. Dimension (L x W
Used Custom 4 Post Heated Laminating Press, Mdl. , Control with Indicators, Timer, Heated
$RFQ
Used Custom 4 Post Heated Laminating Press, Mdl. , Control with Indicators, Timer, Heated
NOTE:  THIS PRESS WAS SET UP TO MAKE STOP LIGHT LENSES.  IT STILL HAS THE DIES. Control With Indicators Heated Platen Switch Air Regulators & Gauges Timer Temperature Gauge Note: This Machin
100 Tons x 6" Used Kard Upacting 4 Post Hydra/Pneumatic Spotting Press, Mdl. , Hand P
$4,750
100 Tons x 6" Used Kard Upacting 4 Post Hydra/Pneumatic Spotting Press, Mdl. , Hand P
Pressure 2,300 LBS Bed Size (Clear Between Posts) 24 3/4" L-R x 15" F-B Bolster (Top & Bottom) 22" L-R x 24" F-B x 7/8" Thick Stroke (Approx) 6" Daylight (Between Bolster) 6 1/8" Cylinder Diameter
20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Co
$5,950
20 Ton Used Airam Air Cut- Off Press, Mdl. #20, Air Tank, Lite Touch Infrared Dual Hand Co
Distance Between Post (L-R, F- B) 17 1/4" x 13 1/4" Bed Size (L- R, F- B) 17" x 13" WEIGHT 800 LBS Dimensions (L x D x H) 45" x 40" x 79" Post Diameter (4) 2" Bladder Size 18" Stand Air Tank L
75 Ton x 8" Used Niagara O.B.I. Punch Press, Mdl. E-75, Dual Palm Controls, Power Ram
$10,000
75 Ton x 8" Used Niagara O.B.I. Punch Press, Mdl. E-75, Dual Palm Controls, Power Ram
Tonnage 75 Stroke 8" Shut Height 21" Bed Size (L-R,F-B) 36" x 24" Ram Size (L-R,F-B) 24" x 18" Throat 12 1/2" Opening Thru Back 18 1/2" Clutch Type Air Clutch Horsepower 7.5 H.P. Dimensions
44 Ton Used Ormont Receding Head Large Bed Clicker Press (60" x 30" Bed), Mdl. D
$12,500
44 Ton Used Ormont Receding Head Large Bed Clicker Press (60" x 30" Bed), Mdl. D
Distance Between Side Housings 63" Table Size 30" x 60" Cutting Head Area 30" x 60" Stroke 4" Daylight Opening 12" Floor to top of bed 31" Horsepower 5 H.P. Dimensions (W x D x H) 86" x 47" x 79"
2,000 Tons x 60" Large Used Clearing Triple Action Hydraulic Press, Deep Draw Hydraul
$679,000
2,000 Tons x 60" Large Used Clearing Triple Action Hydraulic Press, Deep Draw Hydraul
Large Hydraulic Triple Action Press from a large Aerospace company.Clearing Press Company is one of the largest Hydraulic Press Manufacturers in the world.  For Decades they have been building the most heavy duty s
Knuth SSB 32Xn Column Drill Press DRILL PRESS
$RFQ
Knuth SSB 32Xn Column Drill Press DRILL PRESS
NEW KNUTH MODEL: SSB 32Xn COLUMN DRILL PRESS   * 5 YEAR WARRANTY *   SPECIFICATIONS WORKING ARE: DRILLING CAPACITY................... 1.26" TAPPING CAPACITY, STEEL............. M 20 TABLE SET UP AR
50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
$12,500
50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
$29,500
75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
$5,950
25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
$5,500
20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
$17,500
20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
$9,950
35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. Voltage WEIGHT 15,000 Lbs. Voltage 440v 3-Phase Note: This Machine Was O
30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
$6,500
30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x
60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
$32,500
60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
For Questions on Specifications please contact http:www.Savagepress.com Note:  This machine has 3 Pieces.  Press, Electrical Cabinet and the Hydraulic Pump.SAVAGE 4 post presses are built with very long b
50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
$11,500
50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" x 1
25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
$21,500
25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
Capacity 25 Ton x 3/4" Bed Area (F-B, L-R) 24" x 18" Stroke 3/4" Crankshaft Diameter 2-1/2" Strokes Per Minute ( Variable ) 220 - 660 SPM Shut Height 10-1/2" Horsepower 5 H.P. WEIGHT 7,000 Lbs.
250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
$65,000
250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
This press was pressing Zerconium Oxide into the round white pucks you see in the photos.It was recently reconditioned including-- New hydraulic fittings- New Hydraulic Seals- Hydraulic container cleaned and conditioned
Related Subcategories:
Categories:
Condition:
  • X Used (59)
Manufacturer:
Location:
Price:
  •  to 
1 | 2