buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 201 - 250 of 16508 matches
Sort by:
Items Per Page:  20 |  50  |  100
1/4" x 10' Used JMT Hydraulic Plate Metal Cutting Shear (Great Condition), Mdl. JMT S
$42,500
1/4" x 10' Used JMT Hydraulic Plate Metal Cutting Shear (Great Condition), Mdl. JMT S
Cutting Length 10' Max. Thickness - Mild Steel 1/4" Max. Thickness - Stainless Steel 6 Mm Gap In Side Frame 50 Mm Strokes 13 1/min Cutting angle 1.5 ° Back Gauge Speed 200 Mm/s Backgauge Spe
400 F Used Kansas Instruments Heat Treat Convection Batch Oven, Mdl. Alov-89, #P1045 *SPEC
$550
400 F Used Kansas Instruments Heat Treat Convection Batch Oven, Mdl. Alov-89, #P1045 *SPEC
Inside Dimensions (W x D x H) 32" X 15" X 13" Max. Temperature 400 F Electrical 1/60/230 WEIGHT 470 Lbs None
12" x 24" Used Kent 3 Axis Hydraulic Autofeed Surface Grinder , Mdl. KGS-63AHD,
$24,500
12" x 24" Used Kent 3 Axis Hydraulic Autofeed Surface Grinder , Mdl. KGS-63AHD,
Capacity 12" x 24" Longitudinal Table Travel 28" Cross Table Travel 13.4" Distance Spindle to Table 24" Grinding Wheel Speed 1740 RPM Grinding Wheel Size (Dia. x Width x Bore) 14" x 1.5" or 2" x 5"
6" x 18" Used Kent Manual Suface Grinder (Late Model), Mdl. KGS-618, Grinding Wh
$5,450
6" x 18" Used Kent Manual Suface Grinder (Late Model), Mdl. KGS-618, Grinding Wh
Working Capacity 6”x18” Table Travel 19.5" Saddle Travel 8.5” Table Surface to Spindle Center 21" Vertical Downfeed Handwheel Graduation 0.0002" Vertical Downfeed Handwheel per Revolu
20" Used Johnson Vertical Bandsaw with Power Table Feed, Mdl. V-20, Blade Welder, Dia
$7,950
20" Used Johnson Vertical Bandsaw with Power Table Feed, Mdl. V-20, Blade Welder, Dia
Throat Capacity 20" Blade Length 147" - 154" Voltage 220/440 V AC / 3 PH Blade Welder Power Table Feed Made In Japan Grinder High & Low Transmission Dial Speed Indicator Rip Fence
20" x 72" Used LeBlond Regal Geared Head Lathe, Mdl. Regal 20", 15" 4
$12,500
20" x 72" Used LeBlond Regal Geared Head Lathe, Mdl. Regal 20", 15" 4
Swong Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-1 Hole Thru Spindle 2" Threads: Inch (48) 2-112 TPI Feeds (48) .0023" - .132" Cross Slide
19" x 72" Used LeBlond Regal Engine Lathe, Mdl. Regal 19", Thread Dial, Tai
$12,500
19" x 72" Used LeBlond Regal Engine Lathe, Mdl. Regal 19", Thread Dial, Tai
Swing Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-2 Hole Thru Spindle 1-3/4" Threads: Inch (48) 2- 112 TPI Feeds (48) 0.0018"- 0.104" C
15" x 54" Used LeBlond Makino Engine Lathe, Mdl. REGAL SERVO SHIFT, 3 Jaw Chuck,
$10,500
15" x 54" Used LeBlond Makino Engine Lathe, Mdl. REGAL SERVO SHIFT, 3 Jaw Chuck,
Swong Over Cross Slide 9 1/2" Cross Slide Travel 8 7/8" Distance Between Centers 54" Spindle Speeds (12) 45-1800 RPM Spindle Nose D1-6 Threads: Inch (48) 2-112 TPI Metric (40) 0.25-14 MM Feeds (4
15" x 54" Used Leblond Geared Head Lathe, Mdl. 15" REGAL, 3 Jaw Chuck, Tape
$8,750
15" x 54" Used Leblond Geared Head Lathe, Mdl. 15" REGAL, 3 Jaw Chuck, Tape
Swing Over Cross Slide 9-1/2" Distance Between Center 54" Hole Thru Spindle 1-17/32" Spindle Nose L-0 Spindle Speeds 30 - 1,800 RPM Tailstock Spindle Travel 5" Compound Rest Travel 3-7/8" Bed Wid
39" x 168" Used Heavy Duty Leblond Engine Lathe, Mdl. 25" Raised, 36"
$39,500
39" x 168" Used Heavy Duty Leblond Engine Lathe, Mdl. 25" Raised, 36"
Swing Over Bed 39" Swing Over Cross Slide 28" Swing 25" Distance Between Centers 168" Threads (Inch) 1-7/16" - 46" Spindle Speeds 3 - 625 RPM Spindle Bore 3" WEIGHT Approx. 25,000# Dimensions
30 H.P. Used Leroi Horizontal Air Compressor Piston Type with Horizontal Tank, Mdl. Model
$3,750
30 H.P. Used Leroi Horizontal Air Compressor Piston Type with Horizontal Tank, Mdl. Model
Horsepower 30 H.P. Capacity 125 PSI None
37" Used Libert C-Frame High Speed Shear, Nibbler, Circle Shear, Mdl. 1276, #A6880
$4,950
37" Used Libert C-Frame High Speed Shear, Nibbler, Circle Shear, Mdl. 1276, #A6880
Depth of Throat 37" Voltage 230 V 1 Phase None
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
$150
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
Capacity 500 Lbs. Table Size 30" x 20" Lift Height 18" WEIGHT 150 LBS. Floor Lock Casters
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
$150
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
Capacity 500 Lbs. Table Size 30" x 20" Lift Height 18" WEIGHT 150 LBS. Floor Lock Casters
37" Used Libert C-Frame High Speed Shear, Nibbler, Stripper, Mdl. 1276, #A6902
$4,950
37" Used Libert C-Frame High Speed Shear, Nibbler, Stripper, Mdl. 1276, #A6902
Depth of Throat 37" Voltage 440v 3-Phase None
7 Drawers Lista International Heavy Duty Cabinet, #A2159
$950
7 Drawers Lista International Heavy Duty Cabinet, #A2159
Drawers 7 2 5 3/4" 3 7 3/4" 1 10" None
6 stand x 22 Ga Used Lockformer Cliproll, Mdl. Cliproll 1 1/8, #A7179
$2,250
6 stand x 22 Ga Used Lockformer Cliproll, Mdl. Cliproll 1 1/8, #A7179
Capacity 22 GA. Stands 6 Stands Type Cliproll Horsepower 2 H.P Spindle Diameter 7/8" None
5 Stand x 22Ga Used Lockformer , Mdl. -, #A7234
$1,950
5 Stand x 22Ga Used Lockformer , Mdl. -, #A7234
Capacity 22 GA. Stands 5 Stands Forming Speed 100 FPM Horsepower 2 H.P. Voltage 110-115V ~ 1 Phase WEIGHT 750 Lbs. Spindle Diameter 7/8" None
440 Ton x 14' Used LVD Hydraulic Press Brake, Mdl. PPN400/4500, Lower Die Holder, 48"
$30,000
440 Ton x 14' Used LVD Hydraulic Press Brake, Mdl. PPN400/4500, Lower Die Holder, 48"
Tonnage 440 Ton Distance Between Housing 148" Bed Width 9.8" Shut Height 21.65" Throat 11.8" Ram Speed: Rapid Approach 188 IPM Pressing 21.5 IPM Safety Curtains No Backgauge Yes Back Ga
135 Tons Used Spartan/Marvel Hydraulic Ironworker, Dual Operation HEAVY DUTY Machine, Mdl.
$43,500
135 Tons Used Spartan/Marvel Hydraulic Ironworker, Dual Operation HEAVY DUTY Machine, Mdl.
      Capacity 135 Ton Angle (L1) 6" Angle (L2) 6" Angle (T) 0.6875" Throat 20" Stroke 3.9375" Dimension 98"L X 35"W X 73"H WEIGHT 8710 (LBS) Material Stops Foot
18" Used Marvel Vertical Bandsaw (Tilt Frame), Mdl. SERIES 8 MARK II, Manual Vise, Ma
$19,500
18" Used Marvel Vertical Bandsaw (Tilt Frame), Mdl. SERIES 8 MARK II, Manual Vise, Ma
Throat 18" Max. Work Height 22" Capacity @ 45 Degrees 18" x 12-3/4" Work Surface Of Table 33" x 24" Blade Speed (Variable) 50 - 450 FPM Power Feed Stroke 1" - 18" Power Feed Force 0 - 140 LBF WEI
13" x 14" Used Marvel Spartan Horizontal Fully Automatic Bandsaw With Feeder (He
$28,500
13" x 14" Used Marvel Spartan Horizontal Fully Automatic Bandsaw With Feeder (He
Round Cutting Capacity 13" Rectangle Cutting Capacity 13” X 14” Saw Blade Dimensions :13’6” X 1.25” X .042" Blade Speeds 60-330 SFPM Hydraulic Pump 1 HP Coolant Pump 1/8 H
30" x 118" Used Mazak Heavy Duty Oil Country Lathe With 12-1/2" Hole Thru S
$67,500
30" x 118" Used Mazak Heavy Duty Oil Country Lathe With 12-1/2" Hole Thru S
Capacity 30" x 118" Swing Over The Bed 30" Distance Between Centers 118" Swing Over Cross Slide 20-3/4" Hole Thru Spindle 12-1/2" Spindle Nose A2-20 Spindle Speeds 5 to 300 RPM Spindle Taper #6 M
6' x 12' Used Mitsubishi Suprema Waterjet Cutting System with Closed Loop Water Circulatio
$77,500
6' x 12' Used Mitsubishi Suprema Waterjet Cutting System with Closed Loop Water Circulatio
Table Width 6' Table Length 12' Pump 60 HP Max Cutting Pressure 60,000 PSI Power Requirement 480/3/60 X-Axis Travel 72" Y-Axis Travel 144" Z-Axis Travel 6" WEIGHT 25,000 LBS Horsepower 50 H
27" X 6" Used Mitutoyo Optical Comparator, Mdl. PH361, Metronics (Quadra-Chek) D
$450
27" X 6" Used Mitutoyo Optical Comparator, Mdl. PH361, Metronics (Quadra-Chek) D
Table Capacity 27'' X 6'' Voltage 110/220v, 1 Ph Metronics (Quadra-Chek) Dro
1-1/4" Used Mitts & Merrill Hydraulic Key Seater, Mdl. 2HYDKS, Tooling, No Pit Requir
$24,500
1-1/4" Used Mitts & Merrill Hydraulic Key Seater, Mdl. 2HYDKS, Tooling, No Pit Requir
Maximum Length Keyway 12" Maximum Width Keyway 1-1/4" Largest Standard Post 2-3/8" Height Floor To Table 40-5/8" Floor Space 52" X 23" Depth of Pit None Cutting Speed (Variable) 4.0 - 29.0 FPM Re
17" x 36" Used Mori Seiki Heavy Duty Gap Bed Engine Lathe, Mdl. MS-850G, Trav-A-
$RFQ
17" x 36" Used Mori Seiki Heavy Duty Gap Bed Engine Lathe, Mdl. MS-850G, Trav-A-
Capacity 17” X 36” Swing Over Cross Slide 9-3/4" Distance Between Centers 32" Spindle Speeds (12) 32 -1,800 RPM Spindle Nose A1-6 Thread: Inch (40) 4-80 TPI Feeds (40) 0.0018" - 0.02
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, Punch Attachment, Coper Notcher, Sh
$8,500
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, Punch Attachment, Coper Notcher, Sh
Capacity 55 Ton Hole 1" Through 7/16" 45 Degrees 3 1/2" x 3/8" Angle Shear: Square 4" x 1/2" Throat 15 3/4" Flat Bars 6" x 5/8" Coper- Notcher: Plates 7/16" Punch Capacity: Tonnage 55 Ton Bar
18 Ga. x 42" Used Niagara Powered Plate Bending Roll, Mdl. 341-P-Roll, #A7452
$RFQ
18 Ga. x 42" Used Niagara Powered Plate Bending Roll, Mdl. 341-P-Roll, #A7452
Wire Grooves (3) 3/8", 1/2", 5/8" Diameter of Rolls 3" Gear Ratio 4:1 None
4' x 8' Used Omax CNC Waterjet Cutting Machine ONLY 1800 HOURS, Mdl. 55100, Omax Standard
$RFQ
4' x 8' Used Omax CNC Waterjet Cutting Machine ONLY 1800 HOURS, Mdl. 55100, Omax Standard
Material Support Slats 4" x 1/8" Galvanized Steel Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter) Electrical Requirements 3-Phase, 380-480 VAC ±10%, 50-60 Hz Noise Level Below 80 dBA a
6'8" x 13'4" Used Omax Waterjet Cutting Machine ONLY 1,200 HOURS! Put into Place
$RFQ
6'8" x 13'4" Used Omax Waterjet Cutting Machine ONLY 1,200 HOURS! Put into Place
Are you looking for a waterjet machine that will increase your profits? Omax is the answer. The OMAX 80X Series are bridge-style waterjet machines that come with many features, including IntelliTRAX, which maximizes tim
1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Du
$RFQ
1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Du
Dual Palm Pedestal Control Tooling DNC 80 CNC Controller
300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A43
$29,500
300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A43
Tonnage 300 Ton Distance Between Housings 149" Throat 10" Shut Height 18" Equipped With Backgauge No Safety Curtains No Type Hydraulic Bed Width 8" Horsepower 30 H.P. Voltage 220/440V ~
8' Used P & J Power Bending Plate Metal Sheet Rolls, Mdl. -, Emergency Cable Stop, Air Dro
$17,500
8' Used P & J Power Bending Plate Metal Sheet Rolls, Mdl. -, Emergency Cable Stop, Air Dro
Foot Pedal Emergency Stop Air Drop End Emergency Cable Stop
135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10,
$14,500
135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10,
Capacity 135 Ton x 10' Distance Between Housings 102" Throat Depth 7" Tonnage 135 Ton Bed Height 35" Shut Height 5" Bed Width 8" Pit Required No Backgauge Yes CNC Controller Automec CNC
400 Tons x 26' Used Pacific Hydraulic Press Brake ( Located White City, OR), Mdl. K400-26,
$80,000
400 Tons x 26' Used Pacific Hydraulic Press Brake ( Located White City, OR), Mdl. K400-26,
Capacity 400 Ton x 26' Distance Betweeen Housings 23' Max Full Length Bending 1/4" x 24' Closed Height 10" Throat Depth 14" Foot and hand controls Yes None
21.5'' x 29.75'' Used Pangborn Roto-Blast Pass Thru Sandblaster ROTO-BLAST (SAND BLASTER)
$129,500
21.5'' x 29.75'' Used Pangborn Roto-Blast Pass Thru Sandblaster ROTO-BLAST (SAND BLASTER)
Operation Performed Descale To A Near White Metal Finish (SSPC-10) Production Rate Structural Shapes 2-6FPM Production Rate Plate And Flat Bar 6-12FPM Rotoblast Units (4) 140DD - 2 Rim Loc 100 Total Hp Ab
26" x 44" Used Peterson Valve Guide & Seat Machine (Sold As Is), Mdl. TCM-25, 1
$1,500
26" x 44" Used Peterson Valve Guide & Seat Machine (Sold As Is), Mdl. TCM-25, 1
Table Length 44" Table Height 26" Column Diameter 21" Table Traverse 47.3 Spindle 3 MT Spindle Travel 7" Max. Table To Spindle 36" Gear Head Speed 8 Speed Speed 74 - 1,134 Rpm 1 Hp
16 Ga. x 4' Used Pexto Plate Bending Roll, Mdl. 3418, Manual Rear Roll Adjustment, Manual
$RFQ
16 Ga. x 4' Used Pexto Plate Bending Roll, Mdl. 3418, Manual Rear Roll Adjustment, Manual
Max. Working Length 48" Roll Diameter 3" Roll Speed 26 RPM Dimensions (L x D x H) 75" x 27" x 44" WEIGHT 1,250 Lbs. Horsepower: 3/4 Electric Foot Pedal Manual Rear Roll Adjustment Manual Drop E
20 Ga. x 42" Used Pexto Powered Circle Shear, Mdl. 299-C, #A7460
$RFQ
20 Ga. x 42" Used Pexto Powered Circle Shear, Mdl. 299-C, #A7460
HEIGHT 23 1/2” Length 82” Width 21” Capacity, Mild Steel 20 Ga. Diameter of Cutters 1 5/8” Diameter Of Clamping Discs 2 1/4” Depth Of Cutting Head To Gauge 9 1/8”
140 Tons Used Piranha Hydraulic Heavy Duty Dual Operation Ironworker , Mdl. PII-140, Joyst
$49,500
140 Tons Used Piranha Hydraulic Heavy Duty Dual Operation Ironworker , Mdl. PII-140, Joyst
The Dual Operator Piranha PII-140 allows for simultaneous operation of the punch station and shear/coper-notcher stations. One of the most powerful ironworkers on the market, providing enough punching force for any appl
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
$50
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
Stroke 12 Ton None
1" x 10' Used Pope Plate Roll, Mdl. PR-101000-4, 3 Roll Drive, 2 Driven Rolls, Epicyc
$37,500
1" x 10' Used Pope Plate Roll, Mdl. PR-101000-4, 3 Roll Drive, 2 Driven Rolls, Epicyc
Capacity 1" x 120" Rolling Capacity (Mild Steel) 1" Dimensions (L x W x H) 86" X 92" X 242" Voltage 220/440V ~ 3 Phase 3 Roll Drive 2 Driven Rolls Power Adjusted Forming Roll Safety System
42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1,
$49,500
42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1,
Capacity 42"/49" x 172" Spindle Nose A1 - 11 Cross Slide Travel 23-1/2" Spindle Speeds (21) 6.3 - 630 RPM Hole Thru Spindle 4-3/4" Distance Between Centers 172" Swing Over Cross Slide 26-3/4" Swi
250 Ton x 12' Used Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250B12, Cybelec ModEva
$79,500
250 Ton x 12' Used Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250B12, Cybelec ModEva
Working Length 145.73” Distance Between Housings 126.03” Adjustable Stroke 10.24” Maximum Open Height 18.31" Throat 15.75” Motor 25 Quick Approach 5.67"/Second Bending 0.4
1/2" x 10' Used SMT Pullmax Hydrulic Power Shear, Mdl. GSA-430, Square Arm, Material
$37,500
1/2" x 10' Used SMT Pullmax Hydrulic Power Shear, Mdl. GSA-430, Square Arm, Material
Rated Capacity 10' X 1/2" Mild Steel Maximum Angle 5/8" X 8' Gap In Frame 12" Stroke Rate 18 To 33 SPM Cutting Rake Angle 0.5 To 4 Degrees Distance Floor To Bed Height 37" Square Arm Material su
700 Ton X 20' Used Pullmax Hydraulic Press Brake (Heavy Duty), Mdl.EKP-M 700 20/16, 4 Way
$172,500
700 Ton X 20' Used Pullmax Hydraulic Press Brake (Heavy Duty), Mdl.EKP-M 700 20/16, 4 Way
Capacity 700 Ton X 20' Tonnage 700 Ton Distance Between Housings 16' Pit Required 6' WEIGHT 94,000 Lbs. or 42,700 Kg. Throat 12" 4 Way Die 6", 4", 2", American Die Holder American Or European To
250 Ton x 10' Used Pullmax Optima CNC Hydraulic Press Brake, Mdl. 250.3.1/2.55, Located In
$49,500
250 Ton x 10' Used Pullmax Optima CNC Hydraulic Press Brake, Mdl. 250.3.1/2.55, Located In
Blade Length 24" Tonnage 250 Ton Distance Between Housings 100-1/2" Throat Depth 9" CNC Controller Cybelec Modeva CNC Axis 6 Axis Bed Width 9" Ram Speed: High 215 IPM Ram Speed: Return 283 IPM
40" Used Pullmax Nibbling and Shearing Machine, Mdl. P13, #A7451
$RFQ
40" Used Pullmax Nibbling and Shearing Machine, Mdl. P13, #A7451
Throat 40" Vertical Throat 12" None
12" x 58" Used Promax Milling Machine, Mdl. -, Table Power Feed, 2 Axis Dro Syst
$11,500
12" x 58" Used Promax Milling Machine, Mdl. -, Table Power Feed, 2 Axis Dro Syst
Table Size 12" x 58" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Quill Travel 5" WEIGHT 2,300 Lbs. Horsepower 2 H.P. Table Power Feed 2 Axis Dro System Lube Pu
Categories:
Condition:
  • X Used (16508)
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>