buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 301 - 350 of 16505 matches
Sort by:
Items Per Page:  20 |  50  |  100
6' x 12' Used Mitsubishi Suprema Waterjet Cutting System with Closed Loop Water Circulatio
$77,500
6' x 12' Used Mitsubishi Suprema Waterjet Cutting System with Closed Loop Water Circulatio
Table Width 6' Table Length 12' Pump 60 HP Max Cutting Pressure 60,000 PSI Power Requirement 480/3/60 X-Axis Travel 72" Y-Axis Travel 144" Z-Axis Travel 6" WEIGHT 25,000 LBS Horsepower 50 H
27" X 6" Used Mitutoyo Optical Comparator, Mdl. PH361, Metronics (Quadra-Chek) D
$450
27" X 6" Used Mitutoyo Optical Comparator, Mdl. PH361, Metronics (Quadra-Chek) D
Table Capacity 27'' X 6'' Voltage 110/220v, 1 Ph Metronics (Quadra-Chek) Dro
1-1/4" Used Mitts & Merrill Hydraulic Key Seater, Mdl. 2HYDKS, Tooling, No Pit Requir
$24,500
1-1/4" Used Mitts & Merrill Hydraulic Key Seater, Mdl. 2HYDKS, Tooling, No Pit Requir
Maximum Length Keyway 12" Maximum Width Keyway 1-1/4" Largest Standard Post 2-3/8" Height Floor To Table 40-5/8" Floor Space 52" X 23" Depth of Pit None Cutting Speed (Variable) 4.0 - 29.0 FPM Re
17" x 36" Used Mori Seiki Heavy Duty Gap Bed Engine Lathe, Mdl. MS-850G, Trav-A-
$RFQ
17" x 36" Used Mori Seiki Heavy Duty Gap Bed Engine Lathe, Mdl. MS-850G, Trav-A-
Capacity 17” X 36” Swing Over Cross Slide 9-3/4" Distance Between Centers 32" Spindle Speeds (12) 32 -1,800 RPM Spindle Nose A1-6 Thread: Inch (40) 4-80 TPI Feeds (40) 0.0018" - 0.02
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, Punch Attachment, Coper Notcher, Sh
$8,500
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, Punch Attachment, Coper Notcher, Sh
Capacity 55 Ton Hole 1" Through 7/16" 45 Degrees 3 1/2" x 3/8" Angle Shear: Square 4" x 1/2" Throat 15 3/4" Flat Bars 6" x 5/8" Coper- Notcher: Plates 7/16" Punch Capacity: Tonnage 55 Ton Bar
18 Ga. x 42" Used Niagara Powered Plate Bending Roll, Mdl. 341-P-Roll, #A7452
$RFQ
18 Ga. x 42" Used Niagara Powered Plate Bending Roll, Mdl. 341-P-Roll, #A7452
Wire Grooves (3) 3/8", 1/2", 5/8" Diameter of Rolls 3" Gear Ratio 4:1 None
4' x 8' Used Omax CNC Waterjet Cutting Machine ONLY 1800 HOURS, Mdl. 55100, Omax Standard
$RFQ
4' x 8' Used Omax CNC Waterjet Cutting Machine ONLY 1800 HOURS, Mdl. 55100, Omax Standard
Material Support Slats 4" x 1/8" Galvanized Steel Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter) Electrical Requirements 3-Phase, 380-480 VAC ±10%, 50-60 Hz Noise Level Below 80 dBA a
6'8" x 13'4" Used Omax Waterjet Cutting Machine ONLY 1,200 HOURS! Put into Place
$RFQ
6'8" x 13'4" Used Omax Waterjet Cutting Machine ONLY 1,200 HOURS! Put into Place
Are you looking for a waterjet machine that will increase your profits? Omax is the answer. The OMAX 80X Series are bridge-style waterjet machines that come with many features, including IntelliTRAX, which maximizes tim
1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Du
$RFQ
1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Du
Dual Palm Pedestal Control Tooling DNC 80 CNC Controller
300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A43
$29,500
300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A43
Tonnage 300 Ton Distance Between Housings 149" Throat 10" Shut Height 18" Equipped With Backgauge No Safety Curtains No Type Hydraulic Bed Width 8" Horsepower 30 H.P. Voltage 220/440V ~
8' Used P & J Power Bending Plate Metal Sheet Rolls, Mdl. -, Emergency Cable Stop, Air Dro
$17,500
8' Used P & J Power Bending Plate Metal Sheet Rolls, Mdl. -, Emergency Cable Stop, Air Dro
Foot Pedal Emergency Stop Air Drop End Emergency Cable Stop
135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10,
$14,500
135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10,
Capacity 135 Ton x 10' Distance Between Housings 102" Throat Depth 7" Tonnage 135 Ton Bed Height 35" Shut Height 5" Bed Width 8" Pit Required No Backgauge Yes CNC Controller Automec CNC
400 Tons x 26' Used Pacific Hydraulic Press Brake ( Located White City, OR), Mdl. K400-26,
$80,000
400 Tons x 26' Used Pacific Hydraulic Press Brake ( Located White City, OR), Mdl. K400-26,
Capacity 400 Ton x 26' Distance Betweeen Housings 23' Max Full Length Bending 1/4" x 24' Closed Height 10" Throat Depth 14" Foot and hand controls Yes None
21.5'' x 29.75'' Used Pangborn Roto-Blast Pass Thru Sandblaster ROTO-BLAST (SAND BLASTER)
$129,500
21.5'' x 29.75'' Used Pangborn Roto-Blast Pass Thru Sandblaster ROTO-BLAST (SAND BLASTER)
Operation Performed Descale To A Near White Metal Finish (SSPC-10) Production Rate Structural Shapes 2-6FPM Production Rate Plate And Flat Bar 6-12FPM Rotoblast Units (4) 140DD - 2 Rim Loc 100 Total Hp Ab
26" x 44" Used Peterson Valve Guide & Seat Machine (Sold As Is), Mdl. TCM-25, 1
$1,500
26" x 44" Used Peterson Valve Guide & Seat Machine (Sold As Is), Mdl. TCM-25, 1
Table Length 44" Table Height 26" Column Diameter 21" Table Traverse 47.3 Spindle 3 MT Spindle Travel 7" Max. Table To Spindle 36" Gear Head Speed 8 Speed Speed 74 - 1,134 Rpm 1 Hp
16 Ga. x 4' Used Pexto Plate Bending Roll, Mdl. 3418, Manual Rear Roll Adjustment, Manual
$RFQ
16 Ga. x 4' Used Pexto Plate Bending Roll, Mdl. 3418, Manual Rear Roll Adjustment, Manual
Max. Working Length 48" Roll Diameter 3" Roll Speed 26 RPM Dimensions (L x D x H) 75" x 27" x 44" WEIGHT 1,250 Lbs. Horsepower: 3/4 Electric Foot Pedal Manual Rear Roll Adjustment Manual Drop E
20 Ga. x 42" Used Pexto Powered Circle Shear, Mdl. 299-C, #A7460
$RFQ
20 Ga. x 42" Used Pexto Powered Circle Shear, Mdl. 299-C, #A7460
HEIGHT 23 1/2” Length 82” Width 21” Capacity, Mild Steel 20 Ga. Diameter of Cutters 1 5/8” Diameter Of Clamping Discs 2 1/4” Depth Of Cutting Head To Gauge 9 1/8”
140 Tons Used Piranha Hydraulic Heavy Duty Dual Operation Ironworker , Mdl. PII-140, Joyst
$49,500
140 Tons Used Piranha Hydraulic Heavy Duty Dual Operation Ironworker , Mdl. PII-140, Joyst
The Dual Operator Piranha PII-140 allows for simultaneous operation of the punch station and shear/coper-notcher stations. One of the most powerful ironworkers on the market, providing enough punching force for any appl
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
$50
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
Stroke 12 Ton None
1" x 10' Used Pope Plate Roll, Mdl. PR-101000-4, 3 Roll Drive, 2 Driven Rolls, Epicyc
$37,500
1" x 10' Used Pope Plate Roll, Mdl. PR-101000-4, 3 Roll Drive, 2 Driven Rolls, Epicyc
Capacity 1" x 120" Rolling Capacity (Mild Steel) 1" Dimensions (L x W x H) 86" X 92" X 242" Voltage 220/440V ~ 3 Phase 3 Roll Drive 2 Driven Rolls Power Adjusted Forming Roll Safety System
42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1,
$49,500
42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1,
Capacity 42"/49" x 172" Spindle Nose A1 - 11 Cross Slide Travel 23-1/2" Spindle Speeds (21) 6.3 - 630 RPM Hole Thru Spindle 4-3/4" Distance Between Centers 172" Swing Over Cross Slide 26-3/4" Swi
250 Ton x 12' Used Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250B12, Cybelec ModEva
$79,500
250 Ton x 12' Used Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250B12, Cybelec ModEva
Working Length 145.73” Distance Between Housings 126.03” Adjustable Stroke 10.24” Maximum Open Height 18.31" Throat 15.75” Motor 25 Quick Approach 5.67"/Second Bending 0.4
1/2" x 10' Used SMT Pullmax Hydrulic Power Shear, Mdl. GSA-430, Square Arm, Material
$37,500
1/2" x 10' Used SMT Pullmax Hydrulic Power Shear, Mdl. GSA-430, Square Arm, Material
Rated Capacity 10' X 1/2" Mild Steel Maximum Angle 5/8" X 8' Gap In Frame 12" Stroke Rate 18 To 33 SPM Cutting Rake Angle 0.5 To 4 Degrees Distance Floor To Bed Height 37" Square Arm Material su
700 Ton X 20' Used Pullmax Hydraulic Press Brake (Heavy Duty), Mdl.EKP-M 700 20/16, 4 Way
$172,500
700 Ton X 20' Used Pullmax Hydraulic Press Brake (Heavy Duty), Mdl.EKP-M 700 20/16, 4 Way
Capacity 700 Ton X 20' Tonnage 700 Ton Distance Between Housings 16' Pit Required 6' WEIGHT 94,000 Lbs. or 42,700 Kg. Throat 12" 4 Way Die 6", 4", 2", American Die Holder American Or European To
250 Ton x 10' Used Pullmax Optima CNC Hydraulic Press Brake, Mdl. 250.3.1/2.55, Located In
$49,500
250 Ton x 10' Used Pullmax Optima CNC Hydraulic Press Brake, Mdl. 250.3.1/2.55, Located In
Blade Length 24" Tonnage 250 Ton Distance Between Housings 100-1/2" Throat Depth 9" CNC Controller Cybelec Modeva CNC Axis 6 Axis Bed Width 9" Ram Speed: High 215 IPM Ram Speed: Return 283 IPM
40" Used Pullmax Nibbling and Shearing Machine, Mdl. P13, #A7451
$RFQ
40" Used Pullmax Nibbling and Shearing Machine, Mdl. P13, #A7451
Throat 40" Vertical Throat 12" None
12" x 58" Used Promax Milling Machine, Mdl. -, Table Power Feed, 2 Axis Dro Syst
$11,500
12" x 58" Used Promax Milling Machine, Mdl. -, Table Power Feed, 2 Axis Dro Syst
Table Size 12" x 58" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Quill Travel 5" WEIGHT 2,300 Lbs. Horsepower 2 H.P. Table Power Feed 2 Axis Dro System Lube Pu
60 Ton Used Questa Clicker Press (Hydraulic) Large Bed Sliding Table Press, Mdl. Model ARE
$39,500
60 Ton Used Questa Clicker Press (Hydraulic) Large Bed Sliding Table Press, Mdl. Model ARE
Tonnage 60 Bed Area 40" x 65" WEIGHT 12,000 LBS Sliding Table Safety Light Curtains
12 Ga. x 4' Used Roper Whitney Power Shear, Mdl. -, Square Arm, 2- Front Supports, (1) Set
$RFQ
12 Ga. x 4' Used Roper Whitney Power Shear, Mdl. -, Square Arm, 2- Front Supports, (1) Set
Max. Cutting Length 52" Rake Angle 11/32" Number of Hold Downs 10 Strokes Per MInute 76 Dimensions (L x D x H) 70" x 42" x 45" WEIGHT 3,200 Lbs. Square Arm 2- Front Supports (1) Set Of Shear B
2" Used Rotex Hand Turret Punch, Mdl. 18AK, Full Set Of Punches & Dies, #A7457
$RFQ
2" Used Rotex Hand Turret Punch, Mdl. 18AK, Full Set Of Punches & Dies, #A7457
Tonnage 8 Capacity 3/32"- 9/64" Thru 14 Ga. Punching Stations 17 Throat 18" Stand Full Set Of Punches & Dies
2'' Used Rotex Manual Hand Turret Punch, Mdl. 18, Stand, #A6957
$4,500
2'' Used Rotex Manual Hand Turret Punch, Mdl. 18, Stand, #A6957
Tonnage 8 Capacity: 3/32'-9/64' Thru 14 ga. Punch Stations 18 Throat 18" Dimensions (L x D x H) 28" x 35" x 56" WEIGHT 467 Lbs. Capacity 5/32" ~ 2" Stand
3″ x 3″ x 5/16″ Used Roundo Angle Bending Roll, Mdl. R-3, #A7487
$33,000
3″ x 3″ x 5/16″ Used Roundo Angle Bending Roll, Mdl. R-3, #A7487
Is a Roundo Plate roll machine the best?  What Do I need to look for when I purchase a Roundo plate roller?Equipment Condition:  Assess the current condition of the Roundo PS205 plate roll. Consider factors su
25,000 Lbs. Used Royal Forklift Electric Forklift, Mdl. TE-350SP, Hard Tires, Battery Char
$65,000
25,000 Lbs. Used Royal Forklift Electric Forklift, Mdl. TE-350SP, Hard Tires, Battery Char
Battery Charger Hard Rubber Tires
16 Ga. Used Ruoff Power Notcher, Mdl. #1, Stand, #A7230
$1,850
16 Ga. Used Ruoff Power Notcher, Mdl. #1, Stand, #A7230
A Ruoff Power Notcher is a specialized machine used for notching metal sheets or plates. It is primarily used in metalworking industries, such as fabrication, HVAC (Heating, Ventilation, and Air Conditioning), and gener
75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Produc
$29,500
75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Produc
NOTE:  NO FEEDER, CONVEYOR or REELS INCLUDED. Capacity 75 Ton Bed Size (F-B, L-R) 32" x 67" Head Type Full Head Tray Height 39" Stroke (Adjustable) 6.8" Daylight Opening 1.5" - 8.3" Down Stro
85 Ton Used Scotchman Hydraulic Ironworker Heavy Duty- (Made In The USA), Mdl. DO8514-20M,
$32,500
85 Ton Used Scotchman Hydraulic Ironworker Heavy Duty- (Made In The USA), Mdl. DO8514-20M,
Comparing Scotchman DO8514-20M Dual Operation Hydraulic Ironworker and Piranha PII-88 Hydraulic Dual Operation IronworkerWhen deciding between the Scotchman DO8514-20M dual operation hydraulic ironworker and the Piranha
10" x 16" Used Scotchman (Swivel Head Mitering) Horizontal BandSaw With Power Cl
$10,500
10" x 16" Used Scotchman (Swivel Head Mitering) Horizontal BandSaw With Power Cl
Helpful information about Scotchman, Doall and Continental Bandaws:Continental Industries was a manufacturer of high-quality bandsaws, and they produced Scotchman horizontal bandsaws. Scotchman is known for its range of
10 H.P. Used Smog Hog Dust Collector (Cartridge Type), Mdl. FJL8-2H55, #A7125
$19,500
10 H.P. Used Smog Hog Dust Collector (Cartridge Type), Mdl. FJL8-2H55, #A7125
The 10 H.P. Used Smog Hog Dust Collector (Cartridge Type), Model FJL8-2H55, is a specific model of dust collector designed to remove airborne contaminants, dust, and particulate matter from industrial environmentsHere a
14" Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle
$8,500
14" Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle
Material Type: Non Ferrous Metals Blade Size 14" Cutting Capacity: Round Solid 4-1/4" Square Solid 4" Round Tube 4-1/4" Rectangular Tube 3" x 5" Blade Speed 1,730 RPM Bar Feed Rate 1/4" - 27"
24" Used Solberga Geared Head Heavy Duty Drill Press , Mdl. SE-2035, T-Slotted Work T
$5,250
24" Used Solberga Geared Head Heavy Duty Drill Press , Mdl. SE-2035, T-Slotted Work T
Capacity 16" x 13" Table Size (T-Slotted) 16" x 20" Drill Capacity 1.2" Spindle Speeds ( 8 ) 90 - 3,610 RPM Spindle Travel 6" Table Elevating Mechanism Table Elevating Mechanism T-Slotted Table
22" Used Solberga Geared Head Drill Press W/ Powered Down Feed, Mdl. SE725, Powered D
$5,750
22" Used Solberga Geared Head Drill Press W/ Powered Down Feed, Mdl. SE725, Powered D
Swing 22" Table Size 18" x 22" Spindle Quill Travel 5" Spindle Quill Feeds (3) .004/.007/.011" Per Revolution Column Diameter 4-1/2" Base Size 14" x 17" Spindle Speeds (8) 120- 1,548 RPM Spindle
19" x 40" Used Standard Modern Military Spec. Engine Lathe "HEAVY DUTY, Nor
$12,500
19" x 40" Used Standard Modern Military Spec. Engine Lathe "HEAVY DUTY, Nor
Capacity 19" x 40" Swing Over Bed 19" Distance Between Centers 40" Hole Thru Spindle 3.15" Spindle Nose D1-11 Spindle Speeds 23 - 1500 RPM Feeds 0.0016 - 0.100 IPR Inch Threads 2 - 120 TPI Hor
200 Ton x 12’ Used Standard Industrial Heavy Duty Hydraulic Press Brakes "American Ma
$67,500
200 Ton x 12’ Used Standard Industrial Heavy Duty Hydraulic Press Brakes "American Ma
Tonnage 200 Ton Punching Tonnage 135 Tons HEIGHT 14" Throat Depth 10" Shipping Weight 32,000 LBS Dimensions ( L x D x H ) 156" X 70" X 118" Maximum Bending Length 12' Distance Between Housings 10
Used Steelabrator Blaster (Parts Machine), Mdl. 205, #P1035 *SPECIAL PRICE!*
$550
Used Steelabrator Blaster (Parts Machine), Mdl. 205, #P1035 *SPECIAL PRICE!*
Horsepower 3.5 H.P. Voltage 220V/Single Phase None
22" x 60" Used Supertec Engine Lathe (Heavy Duty), Mdl. 2260, Steady Rest, 2 Spe
$19,500
22" x 60" Used Supertec Engine Lathe (Heavy Duty), Mdl. 2260, Steady Rest, 2 Spe
Distance Between Centers 60" 2 Speed Tailstock 2 Axis Digital Readout System 6 Jaw Chuck Coolant System Splash Guard Foot Pedal Brake Steady Rest
6" Used Sunnen Rod Hone Machine, Mdl. LBB-1699k, Assorted Hones, Sunnen Gauge, Cabine
$4,250
6" Used Sunnen Rod Hone Machine, Mdl. LBB-1699k, Assorted Hones, Sunnen Gauge, Cabine
What is a LBB-1699K Sunnen hone used for?The LBB-1699K Sunnen hone is a specific model of honing machine manufactured by Sunnen Products Company. This type of machine is commonly used for precision honing operations in
60" Used Doall Vertical Band Saw Super Deep Throat, Mdl. 6013-3, Hydraulic Blade Tens
$29,500
60" Used Doall Vertical Band Saw Super Deep Throat, Mdl. 6013-3, Hydraulic Blade Tens
Throat 60" Dimensions ( L x W x H ) 117" x 50" x 107" WEIGHT 8,000 LBS. Blade Length 273" Voltage 440V Three Phase Foot Pedal Chip Blower Hydraulic Blade Tension Control Table Power Feed Blad
40" Used Tannewitz High Speed Vertical Bandsaw W/ Hydraulic Table Feed, Mdl. TR4012VW
$11,750
40" Used Tannewitz High Speed Vertical Bandsaw W/ Hydraulic Table Feed, Mdl. TR4012VW
Capacity 40" Table Size 29" x 26-3/4" Auxiliary Table 18.8" x 26.7" Table Height From Floor 40" Blade Speeds 50 - 5,200 FPM Blade Size 1/8" - 1" x 194-7/8" Table Stroke 14-3/4" Working Height 12-
36" Used Tannewitz High Speed Vertical Bandsaw, Mdl. GVTNE, High Speed Geared Variabl
$14,500
36" Used Tannewitz High Speed Vertical Bandsaw, Mdl. GVTNE, High Speed Geared Variabl
36" Used Tannewitz High Speed Vertical Bandsaw, Mdl. GVTNEThe Tannewitz GVTNE high speed vertical bandsaw is a great choice for those looking to add reliable and efficient cutting power to their operation. Blade Speeds
6600 sweeper Used Tennant Rider Power Sweeper (Only 660 Hours) Propane Power Operated Indu
$16,500
6600 sweeper Used Tennant Rider Power Sweeper (Only 660 Hours) Propane Power Operated Indu
•Maneuverable design for hard-to-reach areas.•Stainless steel construction ensures the sweeper will last for years to come.•Heavy duty brushes are designed to clean up even the toughest dirt and debris
Categories:
Condition:
  • X Used (16505)
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>