buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Okuma > Michigan

Okuma Machine Tools in Michigan

31 new & used Okuma machine tools items for sale in Michigan
1 | 2
Refine: Viewing 1 - 20 of 31 matches
Sort by:
Items Per Page:  20  |  50 |  100
Okuma LB 15-MW Live Tool  Sub Spindle CNC Turning Center Lathe 8" Chu
Used Okuma LB 15-MW Live Tool Sub Spindle CNC Turning Center Lathe 8" Chuck 1999 Specifications: Control .............................................................................. OSP 7000L Swing Ov
OKUMA LU-S1600-2SC X 1000
OKUMA LU-S1600-2SC X 1000 Built Nov. 2014 Installed Mar. 2017 OSP-P300L control 725 cutting hours Machining NAVI (microphone system to adjust VSS and reduce chatter) Okuma steady rest interface (electronics and sof
Okuma Crown Lathe Type 762S-BB  OSP-700L control
Okuma Crown Lathe Type 762S-BB OSP-700L control Installed 11/97 S/N: 09100308 10 inch SMW quick change chuck model THW 265-71 Chip conveyor Hennig KMO-0320-00 Royal filtermist F275 Zebra oil skimmer 30Kva three
Okuma Cadet Lathe Type LNC-8C   OSP-700L control
Okuma Cadet Lathe Type LNC-8C OSP-700L control Installed 12/96 S/N: 0812E016 10 inch SMW quick change chuck model THW 265-71 Chip conveyor Hennig KMO-0320-00 Royal filtermist F275 Zebra oil skimmer 23Kva three
Okuma # MACTURN-250W , complete w/lower turret, sub-spindle, chip, OSP E100L, 8" chuc
Spindle 5,000 RPM, 56" between centers, High pressure 1,000 psi coolant 3 1/4 spindle bore , sub spindle 6,000 RPM, 40 ATC. HSK 63. Two machine 2003 & 2005 Very well maintained, LOW hrs
Okuma LB15 BB CNC Lathe
Okuma LB15 BB CNC Lathe Year 1988 S/N 2365 General Specifications Bar capacity 2.5" Spindle bore 3" Swing Over Bed 15.75” Max Turning Diameter 9.84” Max Work Length 19.68” X-Axis Travel (Cross-Slid
Okuma LC30 12" chuck Tailstock OSP5000L-G Control
Okuma LC30 12" chuck Tailstock OSP5000L-G Control
OKUMA CADET V4020 CNC VERTICAL MACHINING CENTER, 1995
OKUMA CADET V4020 CNC VERTICAL MACHINING CENTER, 20 TOOL, 40 TAPER S/N 0041, Travels, X 40", Y 20", Z 20", Table 20.8 x 47", 40 Taper, 15 H.P
OKUMA MAC TURN 250-W CNC MULTI AXIS LATHE
OKUMA MAC TURN 250-W CNC MULTI AXIS LATHE YEAR 2004 S/N 108979 SPECIFICATIONS: ===================================================== Control OSP E100 Number of Axis 7 Chuck Size 8 Swing 21.65 Turning Dia
Okuma LT25 CNC Lathe  Year      2000
Okuma LT25 CNC Lathe Year 2000 Serial Number 0073 Control OSP U100L Number of Axis 4 Chuck Size 12″ Swing 19.67″ Turning Diameter 11.81″ Center Distance
Okuma MC40VA - Vertical Machining Center
Okuma MC40VA - Vertical Machining Center Year: 1995 Specifications: Table Size(Inches)....................39.37 x 20.08 Load Capacity(lbs).............................1100 Table Surface to Floor Level(Inches)......
Okuma LB2000 EX II
Swing Over Bed: 22'' Distance Between Centers: 10'' - 20'' Highest Spindle Speed (RPM): Over 5000 Hole Thru Spindle: 2.44 OSP3000L Control Very Low Hours !!! Cut Only Aluminum Machine Is Equipped With Live Mill
  • Swing: 22"
  • Centers: 20"
    OKUMA MX-60 HB CNC HORIZONTAL MACHINING CENTER (1997)
    YEAR NEW....... 1997 PALLETS (2) 24.8" X 24.8" MAX TABLE LOAD 2,640 LBS PALLET INDEXING .001 DEG TRAVELS (X) 39.37" (Y) 31.5" (Z) 31.8" SPINDLE NO
    • X axis: 39.37"
    • Y axis: 31.5"
      OKUMA MC-V4020 CNC 4 AXIS VERTICAL MACHINING CENTER  (2002)
      YEAR NEW.... 2002 SN ................... 0143 TABLE SIZE 48" X 20" LOAD CAPACITY 1,500 LBS TRAVELS (X) 40" (Y) 20" (Z) 17.72" SPINDLE END TO TABLE
      • X axis: 40"
      • Y axis: 20"
        OKUMA LT-25 TWIN SPINDLE TWIN TURRET CNC TURNING CENTER (2000)
        MANUFACTURED IN 2000 SERIAL NUMBER: 0082 MAX TURNING DIAMETER................................................ 11.81" MAX SWING.......................................................................... 19.67&qu
        • Swing: 19.67"
        • Centers: 60"
          OKUMA LNC-8 CNC TURNING CENTER (1996)
          YEAR NEW........... 1996 S.N. ........................ D823 MAX SWING 15.75" LONGITUDINAL TRAVEL 19.89" MAX TURNING 9.84" SPINDLE BORE 2.2" MAIN MOTOR 15 HP SPINDLE SPEED 4200 RPM TURRET
          • Swing: 15.75"
          • Centers: 19.89"
            OKUMA LB-25 CNC TURNING CENTER (1992)
            MANUFACTURED IN 1992 SERIAL NUMBER: 9383 MAX SWING OVER BED.................................................. 18.90" MAX WORK LENGTH....................................................... 25.59" MAX TURN
            • Swing: 18.9"
            • Centers: 30"
              OKUMA ESL-10 CNC TURNING CENTER (2002)
              YEAR MANUFACTURED........ 2001 INSTALLED NEW..................... 2002 S.N. ............................................. 0013 SWING OVER BED 21.65" SWING OVER CROSS SLIDE 15.75" MAX TURNING DIAMETER 12
              • Swing: 21.65"
              • Centers: 19.68"
                OKUMA LNC 8C  "BIG BORE" CADET CNC TURNING CENTER (1996)
                YEAR NEW.......... 1996 S.N. ....................... D850 MAX SWING..............................................................15.75" LONGITUDINAL TRAVEL........................................19.89" MA
                • Swing: 15.75"
                • Centers: 19.89"
                  Okuma Millac 5-Axis Vertical Machining Center (1980)
                  Okuma Millac 5-Axis Vertical Machining Center (1980)
                  Condition:
                  Manufacturer:
                  • X Okuma (31)
                  Location:
                  • X Michigan (31)
                  Price:
                  •  to 
                  1 | 2