buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Okuma > Illinois

Used Okuma Machine Tools in Illinois

26 used Okuma machine tools items for sale in Illinois
1 | 2
Refine: Viewing 1 - 20 of 26 matches
Sort by:
Items Per Page:  20  |  50 |  100
OKUMA MB-5000H 4-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER
OKUMA MB-5000H 3-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER New 2018 0 Hours Never Been Run Motor Driven with 30/22 HP Spindle Drive and Controls EQUIPPED WITH: P300 Okuma  C
OKUMA MB-5000H 4-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER
OKUMA MB-5000H 3-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER New 2018 Only 180 Hours Motor Driven with 30/22 HP Spindle Drive and Controls EQUIPPED WITH: P300 Okuma CNC Controls, High Pressu
2017 Okuma LB3000EXII MYW 800 Spaceturn
2017 Okuma LB3000EXII MYW 800 Spaceturn Okuma OSP-THINC Control Chuck type Kitagawa BB208 2.59 bore capacity Sub-Spindle Tool Presetter
  • Swing: 18.5"
  • Centers: 39.76"
    1992 Okuma Cadet LNC-8 2 Axis CNC Turning Center
    Specifications: Swing Over Bed Max...........................................................................15.75" Turning Diameter Max...........................................................................
    • Swing: 15.75"
      OKUMA LU-S1600-2SC X 1000 4-AXIS CNC TURNING CENTER
      OKUMA LU-S1600-2SC X 1000 4 AXIS CNC TURNING CENTER NEW-2014 (Installed in 2017) SPECIFICATIONS: (830 Cutting Hrs) Distance Between Centers 39.37" Swing Over Bed 19.68" Max Turn Dia 6.2" VAC Spindle
      16" x 60" Okuma GA47F CNC Angle Head Grinder
      Serial No. 0134 Age: 2000 Swing over Table 16.93" Maximum Grinding Diameter 15.75" Maximum Distance between Centers 59.06" Maximum Grinding Wheel Width 6.30" Maximum Workpiec Weight betwee
      • Swing: 16.93"
      • Centers: 59.06"
        2005 Okuma Robusturn LFS12-2SP Twin Spindle/Turret CNC Gantry/Stocker Lathe
        Specifications: Control: ..................................................................... Okuma OSP-P100 Max Swing over Bed: ........................................................................................
        • Swing: 8"
        • Centers: 8"
          OKUMA LB-300M BIG BORE CNC LATHE
          OKUMA SPACETURN LB-300M BIG BORE CNC LATHE New 1998 Motor Driven with 20 HP, 3-Phase, 60 Cycle, AC Spindle Drive Motor EQUIPPED WITH: Okuma OSP-U100L CNC Controls, Programmable Tailstock, MD Chip Conveyor, Coola
          2005 Okuma MB-46VAE CNC Vertical Machining Center
          Specifications: Table Size .......................................................................... 39.3” x 18.1” X-Axis Travels .................................................................................. 30”
          • X axis: 30"
          • Y axis: 18"
            2001 Okuma Impact LU-15M-2ST CNC Lathe
            Specifications: Swing Over Bed ............................................................ 20.87” Max Turning Length ....................................................... 23.62” Max Turning Diameter ...............
            • Swing: 20.87"
              1997 Okuma Cadet LNC-8 CNC Turning Center
              Specifications: Control ........................................................ OSP 5020L Swing Over Bed ................................................... 15.7” Max. Turn Diameter ................................
              • Swing: 15.7"
                13" X 13.78" OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER, MODEL GA-
                13" X 13.78" OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER MODEL GA-34F S/N 08040032 NEW 1996 DISTANCE BETWEEN CENTERS ------------------ 350 MM ( 13.78
                • Swing: 13"
                • Centers: 13.78"
                  2002 Okuma Impact LU15-2SC/600 CNC Turning Center
                  Specifications: Max Swing Over Bed .............................................................. 22" Max Turn Diameter ............................................................ 14.17" Max Turn Length ...
                  • Swing: 22"
                    13" X 13.78" OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER, MODEL GA-
                    13" X 13.78" OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER MODEL GA-36F S/N 08040035 NEW 1996 DISTANCE BETWEEN CENTERS ------------------ 350 MM ( 13.78
                    • Swing: 13"
                    • Centers: 13.78"
                      2000 Okuma ES-V3016
                      Specifications: Control ........................................................................... OSP 10M X Axis Travel ........................................................................... 30” Y Axis Travel
                      • X axis: 30"
                      • Y axis: 16"
                        Okuma MC-60VAE, 1997, Aerospace use
                        - OSP-7000-m CNC Control with: 12.1" color LCD, 3.5" floppy drive, Graphics, MacMan - Long X axis Travel - 59.05" - 20 Position Side-Mount Tool Changer - Chip Conveyor - Remote Manual Pulse Generato
                        • X axis: 59"
                        • Y axis: 24.8"
                          Okuma MB-4000H Model MB-4000H CNC Horizontal Machining Center
                          New: 2011 EQUIPPED WITH: Okuma OSP- P200MA CNC Control w/Color CRT, Helical Cut, One Directional Positioning, Skip Function, Exact Stop, Hi-Cut Pro, Inch/Metric Switchable, Area Machining, 3D Simulation, Graphic -
                          • X axis: 22.05"
                          • Y axis: 22.05"
                            OKUMA CROWN L1060 CNC TURNING CENTER
                            OKUMA CROWN L1060 CNC TURNING CENTER S/N 1531 NEW 1999 SWING OVER BED ------------------------------- 21.65" MAXIMUM OVER CARRIAGE --------------------- 15.75" MAXIMUM TURNING
                            • Swing: 21.65"
                              OKUMA MODEL #ES-L10 CNC TURNING CENTER
                              OKUMA MODEL #ES-L10 CNC TURNING CENTER MANUFACTURED 2004 RACO Stock Number R018418 SWING OVER BED -------------------------------- 21.65" MAXIMUM OVER CARRIAGE ---------------------- 15.75" MAXIMUM TURNI
                              • Swing: 21.65"
                                Parts for Okuma Horizontal Machining Center
                                OSP-U100M control, Pallets, Boards, Servo Motors, Servo Drives, Transformer From a 1999 Okuma MX-60HB
                                • X axis: 39"
                                • Y axis: 31"
                                  Condition:
                                  • X Used (26)
                                  Manufacturer:
                                  • X Okuma (26)
                                  Location:
                                  • X Illinois (26)
                                  Price:
                                  •  to 
                                  1 | 2