Used Crouch/ Ritter Edge Sander Non-Oscillating.
7” x 148" Abrasive Belt Size
Graphite Covered Platen
7.5 H.P. Abrasive Belt Drive Motor, T.E.F.C.
3,700 FPM Abrasive Belt Speed
Swing Away Dust Hood With 6"
Used Timesavers 352-4ICP 4 Head Wide Belt Sander.
Year of Man.: 2001
Serial #: 28422
Electric: 460 volt 3 phase
* New Controller
* Last head has been totally rebuilt
25HP Crossbelt segmented 6&quo
Age: Circa 1987
Electrics: 220-440/36.5-18.3 amps/15 HP/60 Cycle/3 Phase, has gear reducer in machine (see pics)
Machine is not under power; machine is available for inspection.
State B4 Oscillating spindle sander, 24" x 20" table, table tilts 45 Degree right and left, single phase electric, in excellent condition comes with table inserts and extra spindles, spindle speed 0-1725 RPM,
State B4 Oscillating spindle sander, 230 volt 3 phase, 24" X 20" table, table tilts 45 degree to the right and the left, in Excellent condition can be seen under power in Canton Ohio with notice or can send a s
Max VS 17 Oscillating spindle sander, table 24" X 24" table tilts 45 degree to the left and to the right, 1 HP single phase electric in excellent condition, can be seen under power, vertical Oscillation 1-1/2&q
Model: Lynx 37 MWT DBB-60
Machine Status: Under Power
Shipping Info: Rigging Fee Extra
Weight: 12,000 lbs
Dimension: L x W x H 10'x6
Brand new grizzly 37" double belt sander, digital raise and lower bed. Purchased brand new for $12,200.00 and only used a few times. Comes with extra sanding belts.
Pick-up only in Bloomer, WI
Used Griggio Model GC 95/1 180 wide belt sander, single head drum platen combination.
Combination head 15kw (20hp) 230v 45 amps
Power raise and lower of the feed bed .25 kw
Feed motor 2 speed .55/1 kw
Used DMC Unisand 2000 43" Two Head Orbital Sander.
Air knife/panel cleaner
Variable speed Feed
SN SA 005168
460V, 3 PH, 53 amps
Used Costa KH2 CCCC 1350 Sander.
1st. head – steel drum – 45 hp.
2nd. Head – 80 durometer rubber – 45 hp.
3rd. head – 60 durometer rubber – 30 hp.
4th. Head – 40 durometer rubber – 20 hp.
Previous owner was sandi
Used Oliver Stroke Sander No 298. 56"x24" table. 195" x 6" sanding belt.
Used Sandingmaster CS8-2-600 Sander.
- 230V, 3 PH
- 2 Head
- 24" Wide Machine
- Recently had first drum revulcanized
- Feed mat is new
- Machine can be seen running
SN 7714303 Year: 1977
Machine is in
Belt Size : 6" x 240"
Dimensions (L x W x H) : 132" x 24" x 90"
Weight : 1,000 Lbs.
Drum Sander 37"x2 7.5/1 PM; Model: DDS239 1791320 [Powermatic]; S/N: 701DOS237006; 37" Double Drum; 7.5hp, 1ph, 230volt
Wide Blt Sndr 37x60 15h 3p PM; Model: RB-37 1790805 [Powermatic]; S/N: 0403RB37010; 15hp, 3ph, 230/460volt
Wide Blt Sndr 1632 7.5/3 -PM; Model: 1791251 1632-3 [Powermatic]; S/N: 08041632241; Open End w/Extra Sanding Belts; 7.5hp, 3ph, 230/460volt
This DMC 53" 4 Head Widebelt Sander has only 4yrs production of use. This DMC Sander has been completely refurbished and tested by SCM with a New Controller, And Controller Card replaced at the price of $20,000.00 a
Downdraft Table 32"x32" Delta; Model: 50-885 [Delta]; S/N: 010569SF0114; 1hp, 1ph, 115/230volt
Sanding Center 6x7 & 4x8 SndRt; Model: N/A [Sand Rite]; S/N: N/A; 6x7 Pneumatic Drum; 4x8 Flatter Brush (B-12); wMobile Base; 3/4hp, 1ph, 115/230volt [Baldor]