Woodworking Equipment

Woodworking Equipment for Sale

 
 

1141 new & used woodworking equipment items for sale

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 1141 matches Sort by: Items Per Page:  20  |  50 |  100
Price:
  •  to 
Plate Joiner Kit Freud
Plate Joiner (Biscuit) Kit, Heavy Duty Adj Fence

Mesa, AZ
View Listing
Freud FDW710K Doweling Joiner
FDW710K Doweling Joiner and line boring twin drill bit design, 3/16" to 1/2" drill bits, 10mm chuck, adj fence

Mesa, AZ
View Listing
CLAUSING 3 Spindle Drill Press (2) 1685 & (1) 1687
SPECIFICATIONS: *Spindle Motor: 3/4 HP *Spindle Nose to Table: 15" *Spindle Speed: 400 to 4000 RPM This machine is equipped with the following options: *220V/440V 3 Phase Note: *Year is unknown

Dundee, FL
View Listing
10" Contractors Saw w/mob base
10" cont saw w/mobile base, Powermatic Model 64A 1-1/2 HP 1 ph 115/230v

Mesa, AZ
View Listing
Dust Collector 3/4 HP
Delta Dust Collector Delta Model 50-179 S/N CFV018477
  • Motor: 0.75HP

    Mesa, AZ
    View Listing
    Cut off fence
    Biesemeyer cut off fence Model 78-939

    Mesa, AZ
    View Listing
    Roller stand-Fold down w/wheels
    HTC Roller stand, adj height, 9 rollers

    Mesa, AZ
    View Listing
    Miter Gauge 7"
    Miter Gauge 7" Craftsman for table saw or shaper

    Mesa, AZ
    View Listing
    Miter Gauge w/hold down, fence & stop
    Miter Gauge, 18" fence, fence stop, and hold down

    Mesa, AZ
    View Listing
    Miter Gauge w/fence
    Miter Gauge w/27" fence

    Mesa, AZ
    View Listing
    Table Saw Outfeed Table
    HTC Outfeed table, fold down, 13 rollers 37 x 31

    Mesa, AZ
    View Listing
    Cabinet Saw PM Model 68 L/T 12/14 w/52" Fence
    Powermatic 68 12/14 Cabinet saw L/T w/52" Fence 3 HP 230v 1 Ph S/N 9068008

    Mesa, AZ
    View Listing
    CR Onsrud CNC Router, Model 145T12
    Please Refer To Machine # 945339 CR Onsrud CNC Router 145T12 W8304 Woodworking Machinery - Manufacturer C.R. Onsrud Model # Tech Series Model 145T12 Serial # 145G120901 Table 5' X 12'

    Elk River, MN
    View Listing
    TIMESAVER 37-20 B ORBITAL-BRUSH SAND
    TIMESAVER 37-20 B ORBITAL-BRUSH SANDER Made to remove Cross Grain Scratches 37” Wide Belt Machine (2) Orbitial Heads (1) Brush full Width Voltage: 230/440V 3Ph 60Hz Price Reduced: Location: Sou

    Tomball, TX
    View Listing
    Fein Half Sheet Sander
    Rare Fein Half Sheet Sander Model MSs 941a New Switch and power cord, very strong and smooth sander 14400 rpm S/N 2005 01 18064

    Mesa, AZ
    View Listing
    Murphy-Rodgers, No. MRY-9A-T, 1800 CFM, 5 HP, 230/460V, 248Sq.Ft.
    Serial No. 1130 SPECIFICATIONS: Dust Capacity 248 Sq. Ft. Motor 5 HP Power 230/460v / 3 ph / 60 Hz Airflo

    Lincolnshire, IL
    View Listing
    700 CFM, Torit, No. 84, 3HP, 4" Inlet, 220/440V
    Serial No. 48194 SPECIFICATIONS: Dust Capacity 150 Sq. Ft. Motor 3 HP Power 440/220v / 3 ph / 60 Hz Airfl

    Lincolnshire, IL
    View Listing
    Gabbiani Class/PCT 3800 Panel Saw
    Rear load, auto. panel saw Well maintained, good condition Year: 1996 Elect/Voltage: 220 V, 60 Cy, 3 Ph. 149" (3800 mm) overall cutting length, 3-7/8" (100mm) max cutting height. 21.5 HP main mot

    Madison, SD
    View Listing
    Used Whirlwind 1000L Left-Hand Cut-Off Saw
    Used Whirlwind 1000L Left-Hand Cut-Off Saw. With 5 hp saw motor. With 2" x 8" stock capacity. For operation on 460/60/3. reconditioned.

    Williamsport, PA
    View Listing
    WILLIAMS & WHITE PRESS 250 TON GAP FRAME
    Category Presses – C – Gap Frame, Hydraulic Manufacturer Williams & White Model 250C Serial Number C-4421 Year 1982 Capacity 250 / 300 Ton Maximum 2500 / 3000 kN Maximum Speed 0 - 25 in/min (635 mm/min) Full Pr

    Washington, PA
    View Listing
    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>