buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolling Mills & Ring Formers

Rolling Mills for Sale

334 new & used rolling mills items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7
Refine: Viewing 151 - 200 of 334 matches
Sort by:
Items Per Page:  20 |  50  |  100
Single Level R Panel Line Used
$RFQ
Single Level R Panel Line Used
( The Bradbury Group ) Used Single Level Rollforming Line Included in Purchase Coil Car Uncoiler Single Level Rollformer R/PBR Drop Table All Electrical and Hydraulic Components Programmable Controller Ant
  • # Stands: #14
    Lubow AR-250 Ring Roller
    $RFQ
    Lubow AR-250 Ring Roller
    No description providedWire Diameter RangeUp to 1/4" Diameter Ring Diameter1" Min. Outside Dia. x 36" Outside Dia. Max. OutputUp to 150 Cuts Per Minute Feed AccuracyPlus or Minus .005" Per 12" Wire Length Approx. Floor S
    32 Stand x 2″ x 20″ PEARSON / TRU-CUT Rollformer
    $RFQ
    32 Stand x 2″ x 20″ PEARSON / TRU-CUT Rollformer
    Stock #3877 Manufacturers: PEARSON and TRU-CUT Model #18-2-40 Serial #R222 Roll Shaft Diameter: 2" Roll Space: 20" Horizontal Centers: 14" Vertical Centers: 6" - 9" Base to Lower Shaft: 7
    • # Stands: #32
      20 Stand x 1-1/2″ x 8″ TISHKEN #20HM1-1/2 Rollformer
      $RFQ
      20 Stand x 1-1/2″ x 8″ TISHKEN #20HM1-1/2 Rollformer
      Serial #15212A-11-73 Direction: R-L Stands: 20 Spindle Diameter: 1-1/2" Roll Space: 8" Horizontal Center: 9" Vertical Adjustment: 4-1/2" – 5-1/2" Base to Center Line of Lower Spindle: 4-1/
      • # Stands: #20
      • Roll diameter: 1.5"
        16 Stand x 2" x 8" TISHKEN #16MW2 Rollformer
        $RFQ
        16 Stand x 2" x 8" TISHKEN #16MW2 Rollformer
        Stock #3853 Serial #7629-557 Direction: R-L Spindle Diameter: 2" Roll Space: 8" Horizontal Center: 12" Adjustment: 5-1/2" - 7" Base Top to Center Lower Spindles: 5" Spindle Key Size:
        • # Stands: #16
          Morgardshammer 22" 3-Hi Rev. Bar Rolling Mill w/Roller Bearings
          $RFQ
          Morgardshammer 22" 3-Hi Rev. Bar Rolling Mill w/Roller Bearings
          This 3-Hi Reversing Mill is designed to run production on Exotic Metals such as Nickel Based Alloy Bar. It is equipped with Spherical Roller Bearings and Tilt Table on both the Entry and Exit areas of the Mill. It wil
          157.4" dia x 39.4" high HBE PRESS Radial Axial Ring Rolling Mill
          $RFQ
          157.4" dia x 39.4" high HBE PRESS Radial Axial Ring Rolling Mill
          Max Ring diameter - 4,000 mm Max Ring Height - 1,000 mm Radial force - 250 tonnes Axial force - 200 tonnes Minimum Ring diameter - 400 mm Minimum Ring Height - 100 mm Main Roll diameter - 820 mm
          16 Stand x 2" x 10" DREISTERN Rollformer
          $RFQ
          16 Stand x 2" x 10" DREISTERN Rollformer
          Model #29333-41 Serial #87039 Direction: R-L Spindle Dia: 2" Roll Space: 10" Horizontal Center: 13" Vertical Adjustment: 4" - 8" Base Top to Center Lower Spindles: 8" Spindle Key Siz
          12 Stand x 1-1/2" x 8" DAHLSTROM Rollformer
          $RFQ
          12 Stand x 1-1/2" x 8" DAHLSTROM Rollformer
          Model #360-12 Serial #332 Stands: 12 Direction: R-L Spindle Dia: 1.5" Rollspace: 8" Horizontal Center: 8" Vertical Adjustment: 4"-5.25" Base Top to Center Lower Spindle: 4.5" Spindl
          • # Stands: #12
          • Roll diameter: 1.5"
            10 Stand x 1-1/2" x 37" BRADBURY Duplex Rollform Line
            $RFQ
            10 Stand x 1-1/2" x 37" BRADBURY Duplex Rollform Line
            Stock #3724 Model #130 Serial #35256 Maximum Blank Width: 37″ Horizontal Center Distance: 7″ Shaft Diameter 1-1/2″ Roll Space: 3″ Forward and Reverse Jogging Anti-Friction Bearings Capacity: 20,000 Lbs Coil ID:
            • # Stands: #10
            • Roll diameter: 1.5"
              Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
              $RFQ
              Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
              Will sell individual stands, roller bearings, spare rolls, chocks and bearings
              32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
              $RFQ
              32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
              1966 Blaw Knox reversing 2-Hi rolling mill complete with manipulators, front & back roller tables, crop shear, down coiler
              7 Stands Yoder M1.5 ROLL FORMER, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY
              $29,500
              7 Stands Yoder M1.5 ROLL FORMER, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY
                7 STAND YODER M1.5 ROLL FORMING LINE   CURRENTLY TOOLED FOR CABINET RACK INDUSTRY   CONSISTING OF:   2500 LBS LITTEL UNCOILER CAPACITY - 2500 LBS WIDTH - 12" ID RANGE - 16"-20
              Bradbury - ASC C & Z Purlin Roll Forming Line
              $RFQ
              Bradbury - ASC C & Z Purlin Roll Forming Line
              Make: Bradbury / ASC Product: C & Z Purlin Size: 4" - 12" Web / 2" - 4" Flanges Roll Former: Bradbury DTR Side - Side Purlin Auto Web Change with ProScale Material: 55 grade 16g - 22g S
              16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
              $44,000
              16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
              Stock #2709 Model #315-B Serial #32646 Year: 1997 Direction: L-R Stands: 16 Spindle Dia: 2.5" Roll Space: 24" Vertical Adj: 4" – 5.5" Horizontal Centers: 9" Center Line of Lower Spindle to Base: 4"
              • # Stands: #16
              • Roll diameter: 2.5"
                23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                $59,000
                23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                Stock #3364 Model #F15-2-1/2-48 Serial #83-088 Year: 1983 Direction: R-L Stands: 23 on a 24 Stand Base Spindle Dia: 2.5" Roll Space: 48" Horizontal Center: 16" Vertical Adjustment: 5"– 9" Base Top to Center Low
                • # Stands: #23
                • Roll diameter: 2.5"
                  Lubow Wire Ring Roller Model AR 250 D
                  $RFQ
                  Lubow Wire Ring Roller Model AR 250 D
                  No description providedMaximum Wire Diameter.250" Maximum Ring Diameter36" Minimum Ring Diameter1" Maximum Speed9000 4" Rings Per Hour Maximum Cuts Per Minute150 Feed Accuracy+/- .005"
                  10 Stand x 3″ x 54″ BRADBURY M3 Ribbed Panel Rollform Line, ON SALE $45,000
                  $45,000
                  10 Stand x 3″ x 54″ BRADBURY M3 Ribbed Panel Rollform Line, ON SALE $45,000
                  Stock #2910 Model #M3 Stands: 10 Direction: R-L Spindle Dia: 3" Roll Space: 54" Horizontal Center: 16" Vertical Adjustment: 9" - 10" Base to Center Lower Spindle: 7-3/8" Spindle Key Size: .5" Equipped
                  • # Stands: #10
                    24ga TIN KNOCKER Pittsburgh Rollformer w/Stand & Flanger Attachment
                    $RFQ
                    24ga TIN KNOCKER Pittsburgh Rollformer w/Stand & Flanger Attachment
                    CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Portable rollformer is a work horse for 24 gauge and lighter material. It is available with power flanging attachment and is perfect for field use. With t
                    $7,950! 10 Stand TISHKEN Rollformer w/Punch & Cut-Off Press
                    $7,950
                    $7,950! 10 Stand TISHKEN Rollformer w/Punch & Cut-Off Press
                    Model #10-4-1-1 Serial #540-640 Stands: 10 Direction: R-L Spindle Dia: 1" Roll Space: 3.5" Horizontal Center: 4.5" Vertical Adjustment: 2.75" - 3.75" Base Top to Center Lower Spindle: 3.25" Spindle Key Size: .2
                    • # Stands: #10
                    • Roll diameter: 1"
                      Lockformer #L-810, rollformer, 10 stand x 1-3/8" x 12
                      $RFQ
                      Lockformer #L-810, rollformer, 10 stand x 1-3/8" x 12
                      Serial #2424 Direction: R-L Roll Shaft Diameter: 1-3/8" Roll Space: 12" Center, 3.5" Outside Horizontal Centers: 8" Vertical Center: 5" Base Top to Center Lower Shaft: 7.5" Shaft Keyway Size: .2
                      • # Stands: #10
                        12 Stand, Tishken #12-M2-2, rollformer, 2" x 6
                        $RFQ
                        12 Stand, Tishken #12-M2-2, rollformer, 2" x 6
                        Serial #333-938 Line Direction: L-R Stands: 12 Spindle Dia: 2" Roll Space: 6" Horizontal Center: 11" Vertical Adjustment: 5"-7" Base Top to Center Lower Spindle: 4.5" Spindle Key Size: 3/8" Gearing: Equal NOT
                        14 Stand x 1-1/2" x 6" TISHKEN #14-HMW-1-1/2 Rollformer
                        $RFQ
                        14 Stand x 1-1/2" x 6" TISHKEN #14-HMW-1-1/2 Rollformer
                        Serial #553-5161 Direction: R-L Spindle Dia: 1.5" Roll Space: 6" Horizontal Center: 9" Vertical Adjustment: 4.5"–5.5" Base Top to Center Lower Spindle: 4.5" Spindle Key Size: .25" Line Speed: 100 FPM Maximum Thi
                        15 Stand x 1.25" x 11" B&K/MV Rollforming Line
                        $RFQ
                        15 Stand x 1.25" x 11" B&K/MV Rollforming Line
                        Stands: 15 Direction: R-L Spindle Diameter: 1.25" Roll Space: 11" Horizontal Center: 12" Vertical Adjustment: 3.5"-5" Base to Center Lower Spindles: 3.5" Base Working Surface: 26.5" Base Coolant Trough: 31.5" St
                        12 Stand x 1.25" ENGEL Rollformer
                        $RFQ
                        12 Stand x 1.25" ENGEL Rollformer
                        Material Thickness: 19–22 ga. Stands: 12 Roll Shaft Diameter: 1-1/4" Shaft Keyway Size: 1/4" Roll Space: 4-1/8" & 4-3/8" Horizontal Centers: 6" Vertical Centers: 4" Base Top to Center Lower Shaft: 4-3/4" Directio
                        9 Stand x 2.5"" KANE & ROACH #579 Rollformer
                        $RFQ
                        9 Stand x 2.5"" KANE & ROACH #579 Rollformer
                        Serial #8565 Stands: 9 Direction: R-L Spindle Diameter: 2-1/2" Roll Space: 33" Horizontal Center: 15" Vertical Adjustment: 5"–8" Base Top to Center Lower Spindle: 6-1/4" Spindle Key Size: 5/8" EQUIPPED WITH:
                        12 Stand x 3" ASC #CAS-4-36-12 Rollformer, $59,000
                        $59,000
                        12 Stand x 3" ASC #CAS-4-36-12 Rollformer, $59,000
                        Serial #15072.000 Direction: R-L Spindle Dia: 3" Roll Space: 36" Horizontal Center: 18" Vertical Adjustment: 6"–9" Base Top to Center Lower Spindle: 7-5/8" Spindle Key Size: 1/2" EQUIPPED WITH: Entry Guide To
                        10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                        $RFQ
                        10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                        Serial #SO-1383 Stands: 10 Direction: R-L Roll Shaft Dia: 1.125" Roll Space: 6" Center, 2.5" Outsides Horizontal Centers: 6" Vertical Center: 3.5" Base to Lower Shaft: 3.25" Shaft Keyway Size: .25" Capacity: 20
                        28 Stands Tishken Duplex Roll Former
                        $RFQ
                        28 Stands Tishken Duplex Roll Former
                        Make: Tishken Year New: 1996 Serial # 21490 Number of Stands: 28 Spindle Diameter: 3" Maximum Material Thickness: .148" Roll Space: 30" - 40" Upper Spindle Adjustment: 6.5" - 8-3/8&quo
                        • # Stands: #28
                        • Roll diameter: 3"
                          8 Stand x 1" ENGEL #BLF-BLN Rollformer
                          $RFQ
                          8 Stand x 1" ENGEL #BLF-BLN Rollformer
                          Serial #490864 Direction: R-L Roll Shaft Dia: 1" Rollspace: 4" Center, 2" Outsides Horizontal Centers: 4" Vertical Center: 2.25" Spindle Keyway Size: .25" Gear Driven EQUIPPED WITH: Strip Guide Motor, 5 HP, 2
                          14 Stand BRADBURY Roll Former, $69,500
                          $69,500
                          14 Stand BRADBURY Roll Former, $69,500
                          Model #415RF Serial #21086 Year: 1990 Driven Stands: 14 Spindle Dia.: 2.5" Roll Space: 42" Vertical Adjustment: 4"- 7.25" Horizontal Centers: 13.5" Center Line of Lower Spindle to Base: 6" Direction: L-R Equipp
                          • # Stands: #14
                          • Roll diameter: 2.5"
                            SJP 16 pass Corrugated Panel
                            $RFQ
                            SJP 16 pass Corrugated Panel
                            7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                            • # Stands: #16
                              SJP 16 pass Corrugated Panel
                              $RFQ
                              SJP 16 pass Corrugated Panel
                              7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                              • # Stands: #16
                                SJP 16 pass Corrugated Panel
                                $RFQ
                                SJP 16 pass Corrugated Panel
                                7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                • # Stands: #16
                                  LOCKFORMER MODEL 22 PITTSBURGH ROLLFORMER, 22 GAUGE
                                  $1,950
                                  LOCKFORMER MODEL 22 PITTSBURGH ROLLFORMER, 22 GAUGE
                                  SPECIFICATIONS CAPACITY: 22 GAUGE DEPTH OF POCKET: 5/16” SPEED: 25 FPM GENERAL DIMENSIONS: 3’ LR X 1’6" FB X 3’6” H ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH POWER FLANGER ATTACHMENT
                                  Dexter 4 Stand Roll Former
                                  $RFQ
                                  Dexter 4 Stand Roll Former
                                  Dexter 4 Stand Roll Former S/N: R-3111, Stock No: 17957 Diameter Shafts: 2.125" Roll Space: 5" Horizontal Centers: 9" Vertical Adjustment: 2" Currently Tooled for 15" Corvette Wheel Trim
                                  • # Stands: #4
                                  • Roll diameter: 2.125"
                                    Sendzimir ZR 23-37 Reversing Cold Rolling Mill
                                    $RFQ
                                    Sendzimir ZR 23-37 Reversing Cold Rolling Mill
                                    Make: Sendzimir Model: ZR-23-37 Material Type: Stainless Steel, High Carbon, Brass Mill Direction: Reversing Material Width: 18.5" (470mm) - 37" (940mm) Coil ID: 20" (508mm) - 24" (610mm) Co
                                    Lockformer Roll Form Line
                                    $RFQ
                                    Lockformer Roll Form Line
                                    Used Lockformer Roll Form Line S/N: Unk, Mfg: 1999, Stock No: 17973 Number of Stands: 14 Number of Passes: 10 Roll Space: 12" Shaft Size: 1.5" Vertical Centers: 4" Vertical Adjustment: .5" Hor
                                    • # Stands: #14
                                    • Roll diameter: 1.5"
                                      16 B&K Gearboxes and Outboards (Spares)
                                      $2,500
                                      16 B&K Gearboxes and Outboards (Spares)
                                      16 B&K Gearboxes and Outboards, Stock# 2944 SPECIFICATIONS: (Per Gearbox) Spindle Diameter: 1-1/2" Roll Space: 12" Spindle Key Size: 1/4" Base Top to Center Lower Spindle: 7-1/4" Vertical Adjustment: 4-1/2" - 7-1
                                      • # Stands: #1
                                      • Roll diameter: 1.5"
                                        YODER M2 Gearbox and Outboard Castings
                                        $RFQ
                                        YODER M2 Gearbox and Outboard Castings
                                        419-872-2364 / [email protected] YODER M2 Gearbox and Outboard Castings, Stock# 2396 SPECIFICATIONS: (9) YODER M2 Standard Gearbox Castings (Old Style) (11) YODER M2 Outboard Stand Castings (Old Style) Cap
                                        • # Stands: #11
                                          1996 Tishken 28 HW-AS-3 Duplex Roll Form
                                          $165,000
                                          1996 Tishken 28 HW-AS-3 Duplex Roll Form
                                          Specifications: Spindles.........................................................28 pairs/ 30 pass base Stands.....................................................................28/ 30 total cap Spindle Diameter...
                                          • # Stands: #30
                                          • Roll diameter: 3"
                                            JET MPR-10HV Manual Pinch Roll Bender 754430K
                                            $RFQ
                                            JET MPR-10HV Manual Pinch Roll Bender 754430K
                                            CALL 386-304-3720 FOR AVAILABILITY FEATURES: The JET Manual Pinch Roll Bender offers great versatility, bending and rolling round, square, and solid tubing and flat bar. Heavy-duty cast iron construction is machined
                                            JET EPR-2 Electric Pinch Roll Bender 754435​
                                            $RFQ
                                            JET EPR-2 Electric Pinch Roll Bender 754435​
                                            CALL 386-304-3720 FOR AVAILABILITY FEATURES: With a rugged frame and base, and hardened rolling shafts with bronze bushings, the JET Electric Pinch Roll Bender is built for durability and accuracy. All electrical and
                                            8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
                                            $RFQ
                                            8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
                                            Manufacturer - Ruesch Type - 4hi reversing Work roll - 2.5" x 8.5" Back up rOLL - 9.5" X 8.5" Current product - stainless steel ID/OD - 16" id/44" od
                                            5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
                                            $RFQ
                                            5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
                                            SPECIFICATIONS: MANUFACTURER: E.W. BLISS CO. (U.S.A.) TYPE: 4-HI COLD REVERSING MILL W/AGC WORK ROLL SIZE: 5" (127MM) DIA. 15 1/2" (394MM) FACE WORK ROLL BEARINGS: TIMKEN ROLLER BACKUP ROLL SIZE: 16�
                                            5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
                                            $RFQ
                                            5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
                                            5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014) Mill Type 2 Hi - Single Direction (Right to Left) Roll Diameter
                                            16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
                                            $RFQ
                                            16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
                                            16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL WITH HYDRAULIC SCREWDOWNS, NEW 2002 MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S) YEAR - 2002 SPEED - 550 FPM ROLL FACE - 19" ROLL DIAMETER -
                                            SUMITOMO PLATE MILL
                                            $RFQ
                                            SUMITOMO PLATE MILL
                                            Located in a Building- 250 Meters X 120Meters 500,000 Tons per year Installed 2006. Shutdown 2012 Material 1800mm x 12 - 20mm finished thickness Slabs - 250mm x 1500mm x 1500mm, 4.5 ton Equipment original 1980, Rei
                                            3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
                                            $RFQ
                                            3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
                                            3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL Line Components: Melting Furnace Holding Furnace Inline Degassing Unit Tundish Casting Wheel - Properzir Model 7C Casting Wheel Sensor Arm Shear Pinch Roll
                                            10 Stand x 1-1/2" x 6" TISHKEN #110 MLW12 Rollformer
                                            $RFQ
                                            10 Stand x 1-1/2" x 6" TISHKEN #110 MLW12 Rollformer
                                            419-872-2364 / [email protected] 10 Stand x 1-1/2" x 6" TISHKEN #110 MLW12 Rollformer, Stock #2953 SERIAL NUMBER: - 5456-1053 SPECIFICATIONS: - Number of Stands: 10 - Line Direction: Right to Left - S
                                            • # Stands: #10
                                            • Roll diameter: 1.5"
                                              Related Subcategories:
                                              Categories:
                                              Condition:
                                              Manufacturer:
                                              Location:
                                              Price:
                                              •  to 
                                              1 | 2 | 3 | 4 | 5 | 6 | 7