Machine Tools > Rolling Mills & Ring Formers > 2 - Hi Rolling Mills

2 High Rolling Mills For Sale

 
 

25 new & used 2 high rolling mill items for sale

1 | 2
Refine: Viewing 1 - 20 of 25 matches Sort by: Items Per Page:  20  |  50 |  100
Categories:
  • X machine tools (25)
  • X Rolling Mills & Ring Formers (25)
  • X 2 - Hi Rolling Mills (25)
Condition:
Price:
  •  to 
62" (1600mm) Schloemann Skin Pass Mill
Mill data: Strip width: 500mm - 1600mm Strip thickness: 0,6mm - 6,0mm Coil diameter: 610mm - 2160mm Max. Coil weight: 26t Gear ratio of winder drives: i1 = 8: 1; i2 = 16: 1 Gear ratio of mill drives: i

Newark, NJ
View Listing
1320mm KRUPP SKIM PASS MILL
Skin Pass Mill 1320 Mill data: Strip width: 500mm - 1320mm Strip thickness: 0.2mm - 4.0mm Coil dimensions: 610mm - 2160mm Max. coil weight: 26t Gear ratio of winder drives: i1 = 3,99 ; i2 = 2,05 Max. ro

Newark, NJ
View Listing
37" WATERBURY FARREL 2 HI SKIN PASS MILL
YEAR: 1969 SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 37IN/939.802MM MINIMUM: 14IN/355.601MM ENTRY GAUGE MAXIMUM:

Newark, NJ
View Listing
25" WATERBURY FARREL 2 HI SKIN PASS MILL
YEAR: 1968 SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 25.000IN/635.001MM MINIMUM: IN/0.000MM ENTRY GAUGE MAXIMUM:

Newark, NJ
View Listing
PAUL O ABBE BALL MILL MODEL A16685 (12703)
MACHINE # 12703 MANUFACTURER: PAUL O ABBE MODEL: A16685 CHAMBER: 18" DIAMETER X 26" LONG CHAMBER LINING: STEEL **PLEASE NOTE: CHAMBER DOOR MISSING **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **

North Branford, CT
View Listing
5 1/2" x 6", MARSHALL RICHARDS, 10 HP DC, WINDERS (11983)
MACHINE # 11983 MANUFACTURER: Marshall Richards SERIAL NUMBER: 661846 SPECIFICATIONS: Roll diameter: 5-1/4" ( 135mm) Roll Width: 6" (150mm) Rolling Speed : 0 to 65 ft/min (0 to 20 m/min) Srewdow

North Branford, CT
View Listing
3" X 5" STANAT MODEL FX-100 2 HI ROLLING MILL (12702)
MACHINE # 12702 MANUFACTURER: STANAT MACHINE CO MODEL: FX-100 ROLL SIZE: 3" (76.2mm) X 5" (127mm) DRIVE MOTOR: 3/4 HP, 3 PH, 60 HERTZ, 208/230/460 VOLTS 1725 RPM, 3.2-3.0/1.5 AMPS BALDOR MOTOR INTO BOSTON GEAR R

North Branford, CT
View Listing
RWF SKIN PASS MILL
Year of Commissioning: 1960 Width: 250-840mm Gauge Range: 0.25 - 4mm Max Coil Weight: 12ton Entry Coiler ID: 500mm Max Entry Coil OD: 1700mm Exit Coiler ID: 500mm Max Exit Coil OD: 1700mm Maximum Line S

Newark, NJ
View Listing
28" x 36" Bliss, 2-Hi hot/cold rolling mill, HAGC, like new
28" x 36" Bliss, 2-Hi hot/cold rolling mill, HAGC, totally rebuilt, new everything, controls, bearings, rolls, etc, 1250HP, like new

Allison Park, PA
View Listing
26" x 53", SACK, SKIN PASS ROLLING MILL (12455)
MACHINE #12455 Width Max. 1350 mm Min. 650 mm Max. Reduction : 2mm to 3mm - 2% : 0.45mm to 2mm - 3% Coil Diameter Inner 610 mm Outer 1200 mm Coil Weight Max. 12 MT Min. 8 MT RA Value 1.5 to 2.0 Micron Mi

North Branford, CT
View Listing
24" x 72", A GARRISON 2 HI ROLLING MILL, 300 HP (12404)
MACHINE #12404 SPECIFICATION -MANUFACTURER: A. GARRISON -TYPE: 2 HI ROLLING MILL -ROLL SIZE -DIAMETER: 24" (609.6mm) -FACE WIDTH: 72" (1828.8m

North Branford, CT
View Listing
86" x 42" UNITED/I2S TEMPER PASS ROLLING MILL
SPECIFICATIONS: COIL WEIGHT CAPACITY: 40ton GAUGE RANGE: .048 to .500 thick WIDTH: 72" ENTRY COIL ID: 24" to 36" EXIT COIL ID: 24" x 30" COIL OD: 80" SPEED: Max 1200 FPM

Newark, NJ
View Listing
18" 2-HI United One-Way Temper Mill
Entry Gauge - .022"-.250" Exit Gauge - .022"- .250" Coil Width - .375"-15.43" Coil Weight - 8500# Entry Coil ID - 16"-24" Entry Coil OD - 68" Exit Coil ID - 16" (20

Newark, NJ
View Listing
18" x 28" 2-HI BLISS TEMPER MILL
Recently rebuilt, all new hydraulics and controls Max Strip Thickness - .250" Min Strip Thickness - .015" Max Strip Width - 24" (28" between the housings) Speed - 350 Ft/Min HP - Main mill 15

Newark, NJ
View Listing
10" x 15-3/4" SCHMITZ MODEL #EA7-250/400 2-HI ROLLING MILL
Roll size ............... 10" Diameter x 15-3/4" Face Water Cooled Manual Screwdown-Individual Dual Control Handwheels Strip width ............. 13-3/4" (350MM) - as taken from Mfg. tag EQUIPPED WIDT

Newark, NJ
View Listing
14" x 12",FENN MODEL 141,PAIR MATCHED SET,75HP & 100HP,REMANUFACRUED 2005,
PRELIMINARY SPECIFICATIONS PAIR OF MATCHINE 2-HI EMBOSSING MILLS , MODEL 141 , SERIES 14 12" ROLL SPACING 14" ROLL DIAMETER

Detroit, MI
View Listing
28" x 48", ACHENBACH, 2HI HOT REVERSING MILL FOR COPPER/BRASS (12119) Machinery
MACHINE# 12119 SPECIFICATIONS: SLAB HEATING FURNACE: MANUFACTURER: BERG & CO.

North Branford, CT
View Listing
9" (228mm) x 5" (127mm), BRODAN, 2-HI REVERSING MILL (11915)
MACHINE# 11915 MANUFACTURER: BRODAN MACHINE CORP. (USA) TYPE: 2-HI COLD ROLLING MILL FOR EITHER WIRE ROD BREAKDOWN OR NARROW STRIP. ROLL SIZE: DIAMETER: 9" (228mm)

North Branford, CT
View Listing
25" x 55", ACHENBACH, REVERSING, W/RECOILERS (11442)
1 ACHENBACH DUO REVERSIBLE MILL Technical Features. 1) Cylinder dimensions diam 650 x 1400 mm. 2) Cylinder hardness 93 - 95 shore C. 3) Lamination oil tank diameter 1750 x 5400 mm. 4) Nr. 4 cooling ramps 5) Nr. 2

North Branford, CT
View Listing
16" x 26", MOSSBERG, 75 HP, (11539)
MACHINE # 11539 MANUFACTURER: MOSSBERG, ATTELBORO, MA TYPE MILL: 2 HIGH ROLL SIZE: 16" (406.4mm) X 26" (660.4mm) MILL STAND CROSS SECTION: 8-1/2" (215.9mm)

North Branford, CT
View Listing
1 | 2