Machine Tools > Lathes & Turning Centers > Engine Lathes

Engine Lathes For Sale

 
 

779 new & used engine lathe items for sale

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 779 matches Sort by: Items Per Page:  20  |  50 |  100
Categories:
  • X machine tools (779)
  • X Lathes & Turning Centers (779)
  • X Engine Lathes (779)
Condition:
Price:
  •  to 
1987 Leblond Makino Regal Inch/MEtric Servo Shift Engine Lathe, 15" x
SPECIFICATIONS CAPACITY SWING OVER BED AND CARRIAGE WINGS: 15-1/2" SWING OVER CROSS SLIDE: 9-1/2" DISTANCE BETWEEN CENTERS: 54" HEADSTOCK SPINDLE SPEEDS, NUMBER: 12 SPINDLE SPEED RANGE: 45 TO 18
  • Swing: 15"
  • Centers: 54"

    Bethlehem, PA
    View Listing
    10” x 36” South Bend Engine lathe
    10” Swing 36” Center Distance 4-1/2’ Bed 4- 228 TPI Equipped with Bed Turret Collet Closer with Nose Piece 2 5” 3 Jaw Chucks 6” 4 Jaw Chuck Drive Plate Factory Cabinet 3 Phase Motor Please Note Missing Thread

    Livingston, NJ
    View Listing
    12” x 36” Clausing Colchester Geared Head Engine Lathe
    Machine Specs: Swing over ways 12” Swing over cross slide 8-3/4” Center distance 36” Spindle bore 1-3/8” Spindle speeds 45 - 2000 RPM Spindle mount - D1-3 Spindle HP 2 HP 220 volt 3 Phase Threads 3.5 - 80 TPI Fe

    Livingston, NJ
    View Listing
    19” x 54” Leblond Regal “ Servo Shift” Inch/ Metric Engine Lathe
    Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 3” Spindle HP 10 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch 2 -

    Livingston, NJ
    View Listing
    19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
    Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 78” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 25 - 1000 RPM Threads Inch

    Livingston, NJ
    View Listing
    19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
    Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch

    Livingston, NJ
    View Listing
    Webb 17" x 40" Gap Lathe, Inch & Metric Thd, Aloris Toolpost,
    (1) Pre-owned Webb Engine Lathe Model: 17 x 40 Year of Manufacture: 1981 Location: Maine Condition: Good SPECIFICATIONS 220/440/3/60 5HP Swing: 17” Swing over Cross Slide: 9” Swing in Gap: 25” Length of Gap
    • Swing: 17"
    • Centers: 40"

      Auburn, ME
      View Listing
      Poreba TR115 B3/4M (1999): 45 SW, 160 CC, DRO, Steady and Follow Rest
      Poreba TR 115 B3/4M (1999) Engine Lathe Swing:.................................. 45.2" Swing over Cross Slide:.......... 31.5" Centers:................................ 160" Spindle Bore:.............

      Milford, MI
      View Listing
      Monarch 2013, Best Lathe Ever Made, 20" x 54" 1500 RPM, Aloris TP
      (1) Pre-owned Monarch Engine Lathe Model: 2013 Year of Manufacture: 1962 Location: Maine Condition: Good SPECIFICATIONS 220/440/3/60 15HP Swing: 20” Swing over Cross Slide: 13” Centers: 54” Spindle Bore: 2 1/
      • Swing: 20"
      • Centers: 54"

        Auburn, ME
        View Listing
        1993 Clausing Professional 8031VS High Performance Engine Lathe, 15" x
        SPECIFICATIONS CENTERS HEIGHT OF CENTERS: 7.67” BETWEEN CENTERS: 50” SWING SWING OVER BED: 15.75” SWING OVER CROSS SLIDE: 9.75" SPINDLE BORED TO PASS: 2.125” NOSE MOUNTING: D1-6 CAMLOCK MORSE
        • Swing: 15"
        • Centers: 50"

          Bethlehem, PA
          View Listing
          Lodge & Shipley Engine Lathe, 25" x 120"
          Lodge & Shipley Engine Lathe Estimated Age - 1950's / 60's Vintage Condition - Good, in operation; see video link below Swing - 25" (largest diameter can take is 27-1/2") Swing Across Carriage -
          • Swing: 15"
          • Centers: 120"

            Portland, OR
            View Listing
            46” X 180” AMERICAN PACEMAKER Lathe
            46” X 180” AMERICAN PACEMAKER Lathe Model 32x180 Raised Style “H”. 40HP, taper attachment, rapid traverse, steady rests, 32” 4-jaw chuck, coolant. New in 1955. Serial No. 74319-55. Stock No. 10055. Specifications:
            • Swing: 49"
            • Centers: 180"

              Houston, TX
              View Listing
              22” X 144” SIDNEY Engine Lathe
              Model 20. 15 ½” 4 jaw chuck, taper attachment, steady rest. New in 1953. Serial No. 9521. Stock No. 10054 Specifications: 2 ¾” spindle bore, D1-8” camlock spindle mount 22 ½” swing over bed 15” swin
              • Swing: 22.5"
              • Centers: 144"

                Houston, TX
                View Listing
                19” x 102” LeBLOND REGAL Engine Lathe
                19” x 102” LeBLOND REGAL Engine Lathe Servo Shift with speed preselect; inch/metric threads, chucks, taper attachment, steady rest, center leg option New in 1980. Serial #11E 746. Stock # 10057. Specifications:
                • Swing: 19.25"
                • Centers: 102"

                  Houston, TX
                  View Listing
                  20" x 60" SHARP GEARED HEAD ENGINE LATHE
                  ONE (1) USED 20" x 60" SHARP GEARED HEAD ENGINE LATHE MODEL 2060C SERIAL NO. 6801108 YEAR OF
                  • Swing: 20"
                  • Centers: 60"

                    Bedford, OH
                    View Listing
                    15-1/4" x 50" CLAUSING® Engine Lathe
                    CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: 7.5 Motor 8" 3 & 10" 4 Jaw Chucks Mitutoyo KL12 2 axis digital readout Thread dial Hardened ways Quick change tool post w/holde
                    • Swing: 15.25"
                    • Centers: 50"

                      Port Orange, FL
                      View Listing
                      86" x 236" Hankook R25W Heavy Duty CNC Roll Lathe
                      Reference #25061 86" x 236" Hankook R25W Heavy Duty CNC Roll Lathe Model: R25W Age: 2010 FEATURES: Fanuc 32iT CNC Control 25 Ton Weight Capacity CAPACITY: Maximum Swing Over Bedways ...........
                      • Swing: 86.6"
                      • Centers: 236.22"

                        Melville, NY
                        View Listing
                        Leblond Regal Engine Lathe, Model 19, 19 x 78
                        GENERAL SPECIFICATIONS Swing Over Bed: 19-1/4" Swing Over Cross Slide: 12-1/4" Distance Between Centers: 78" Hole Through Spindle: 1-49/64" Spindle Nose: Cam-Lock Spindle Speeds: (12) 40 to 1

                        Wixom, MI
                        View Listing
                        LeBlond Lathe 15" x 54" Engine Lathe
                        LeBlond Lathe: 15" swing x 54" bet ctrs. serial# 8C 4271 Cam lock spindle nose 10" Buck adj-tru 2 piece 3 jaw chuck 10" independent 4 jaw chuck Coolant tank ( after market ) splash guar

                        Wixom, MI
                        View Listing
                        DoAll Model LT13 Engine Lathe 13 x 40
                        DoAll Model LT 13 Engine Lathe 13" x 40" Capacity Aloris Tool Post Inch/Metric Threading 5.12 H.P. 50-2500 RPM 8" 4 Jaw Chuck

                        Wixom, MI
                        View Listing
                        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>