buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4
Refine: Viewing 1 - 100 of 309 matches
Sort by:
Items Per Page:  20 |  50 |  100
18", LOMA, No. KE-3, CROSS CUT TYPE, 72" CROSS TRAVEL, (4720)
$RFQ
18", LOMA, No. KE-3, CROSS CUT TYPE, 72" CROSS TRAVEL, (4720)
MACHINE # 4720MANUFACTURER: LOMA MACHINE CO.TYPE: CROSS CUT SAW FOR TUBE, BAR, SLAB OR INGOTBLADE DIAMETER: 18"MAXIMUM CR
65" (1650mm) x .120" (3mm), UNGERER, CUT-TO-LENGTH/SLITTING LINE,
$RFQ
65" (1650mm) x .120" (3mm), UNGERER, CUT-TO-LENGTH/SLITTING LINE,
MACHINE# 12567MANUFACTURERS: ............................ ZAPPA/UNGERER/LISSE/PELMAYEAR: ...................................... 1976/1988/1998/2006/2011TYPE: ........... COMBINATION LEVELING, CUT-TO-LENGTH & SLITTING
2500 Lb., COOPER WEYMOUTH, DUAL ARM, 12/16" ID X 24" WIDE (12477)
$RFQ
2500 Lb., COOPER WEYMOUTH, DUAL ARM, 12/16" ID X 24" WIDE (12477)
MACHINE# 12477SPECIFICATIONS:MANUFACTURER: COOPER WEYMOUTHTYPE: EXPANDING MANDRELCAPACITY PER ARM: 2500 LBS.EXPANSION RANGE: 12"- 16" (305mm - 406mm)TYPE E
FIN TUBE PRODUCTION LINE (12386)
$RFQ
FIN TUBE PRODUCTION LINE (12386)
MACHINE# 12386This Line was used to produce fin tubes in the air conditioning unit ofautomobiles.Products can also be used in coolant tubes in the home air conditioningunits, copper channels, etc.The Line consists of:Alu
10"(250mm) X 20"(500mm) X 20"(500mm) 4 HIGH NON REVERSING ROLLING MILL (138
$RFQ
10"(250mm) X 20"(500mm) X 20"(500mm) 4 HIGH NON REVERSING ROLLING MILL (138
Max Width Workpiece 19 inches Work Roll Dia.
HOT ROLLING MILL PLANT FOR ROUND BAR (12311)
$RFQ
HOT ROLLING MILL PLANT FOR ROUND BAR (12311)
MACHINE# 12311 SPECIFICATIONS: HOT ROLLING MILL PLANT FOR ROUND BAR: Production capacity: 45 tons/hour 1. BILLET SIZE: 160mm x 160mm x 3m-4m Long (6.3" x 6.3" x 10-13 Ft.) 120mm x 120mm x 3m-4m Long (4.7" x 4.7" x 10
COMPLETE BRASS & SANITARY FITTINGS PLANT FOR FAUCETS, FIXTURES, ETC. (10068)
$RFQ
COMPLETE BRASS & SANITARY FITTINGS PLANT FOR FAUCETS, FIXTURES, ETC. (10068)
MACHINERY INTERNATIONAL CORPORATION is pleased to offer a complete factory for the production of brass plumbing fixtures, including the following products: Bath Fixtures Lavatory Mixers Sink Mixers Faucets Several Types
Pipe 1/2"& 3/4" x 36"- 60"
$10
Pipe 1/2"& 3/4" x 36"- 60"
Pipe 1/2"& 3/4" x 36"- 60" Model: Various 1/2" & 3/4" Pipe Black & Galvanized; 36" - 60" PRICED PER EACH
Various Handtools
$20
Various Handtools
Various Handtools Models: A - Stanley Dovetail Saw - 10" B - Disston Dovetail Saw - 10" C - Fine Kerf Dovetail Saw - 6-1/2" D - Woodriver Marking Gauge - 6"
Various Handtools
$45
Various Handtools
Models: A - LieNielsen #4 Screw Driver B - LieNielsen #7 Screw Driver C - GlenDrake Chisel Hammer - CH#2 D - ISO9001:2000 6" Digital Caliper E - Veritas Variab
Clamp Carrier 8’ with 27 Clamps
$1,500
Clamp Carrier 8’ with 27 Clamps
Clamp Carrier 8’ 27 Clamps In good condition and working order.
Hand Drill (Egg Beater)
$65
Hand Drill (Egg Beater)
Hand Drill (Egg Beater) Model: Various [Goodell Pratt, Millers Falls & Stanley] Egg Beater Style; 12" - 14-1/2"
Hand Drill -Storage in Handle
$45
Hand Drill -Storage in Handle
Hand Drill -Storage in Handle Model: Various [Goodell Pratt, Millers Falls & Viking] Egg Beater Style; 11-1/2 - 13"
Hand Drill (Egg Beater)
$35
Hand Drill (Egg Beater)
Hand Drill (Egg Beater) Model: Various [Goodell Pratt, Millers Falls & Paxto] Egg Beater Style; 11" - 12-1/2"
Screw/Drill Push Driver
$35
Screw/Drill Push Driver
Screw/Drill Push Driver Model: Various [Stanley; Miller Falls; Goodell Pratt] 8-1/2" - 17"
Plane Smoothing & Bench
$59
Plane Smoothing & Bench
Plane Smoothing & Bench Model: #4 & #4-1/2 [Stanley, Sargent, Millers Falls, Dunlap]
Plane Bench, Jack, Block, Etc
$99
Plane Bench, Jack, Block, Etc
Plane Bench, Jack, Block, Etc Model: 5 & Etc Various [Bedrock, Record, & Various]
Plane Various SmlBlk;Blk;Smth
$120
Plane Various SmlBlk;Blk;Smth
Plane Various Small Block; Block; Smooth Model: 103 [Lie Nielsen]; 249P [Garantie]; 9 [Millers Falls] Small Block 1-1/4"x5-1/4"; Block 1-1/2"x5-7/8"; Smooth 2"x9" Like New
Right Angle Head From 3.93" TOS H100A Boring Mill
$RFQ
Right Angle Head From 3.93" TOS H100A Boring Mill
Reference #29339 Right Angle Head From 3.93" TOS H100A Boring Mill FEATURES: Previously Used On TOS H100A # 50 Taper SPECIFICATIONS: Spindle Taper ......................... # 50 Center Distance .....
Plate Roll
$4,000
Plate Roll
Plate roll (Pyramid Type). Will accept steel plate up to 6' in width and 1/2" in thickness.
  • Width: 72"
  • Thickness: 0.5"
    H Frame Press, 45" Between Uprights,
    $2,450
    H Frame Press, 45" Between Uprights,
    H Frame Press, 45" Between Uprights,
    • Stroke: 12"
      (4) 47" x 144" x 16" T-Slotted Cast Iron Floor Plates
      $RFQ
      (4) 47" x 144" x 16" T-Slotted Cast Iron Floor Plates
      Reference #26020 (4) 47" x 144" x 16" T-Slotted Cast Iron Floor Plates CAPACITY: Overall Length, Each .................. 144" Overall Width, Each ................... 47" Total Area ...
      • Width: 47"
      • Length: 144"
        Spiral Molder Cutter head
        $149
        Spiral Molder Cutter head
        Spiral Molder Cutter head. Measures 6" diam x 3" ht. 40mm bore. With 24 ct 15mm x 15mm knives.
        Drawer Slide 16" Brown
        $1
        Drawer Slide 16" Brown
        16" Epoxy coated Drawer Slide; brown [actual price is $1.50 per set]
        12" Saw Blade
        $79
        12" Saw Blade
        Saw Blades (3 Each); $79.00 (Each); Various Tooth Count; 12"; 30mm Bore; Newly Sharpened
        ANIMAL CAGES
        $1,000
        ANIMAL CAGES
        TWO PER STACK
        CIP System
        $RFQ
        CIP System
        One used
        Basket Centrifuge
        $RFQ
        Basket Centrifuge
        2 available
        Glass-lined Reactor
        $RFQ
        Glass-lined Reactor
        5 available
        250 liter s.s. Tank
        $RFQ
        250 liter s.s. Tank
        251 liter s.s. Tank
        WATER METER #3390
        $RFQ
        WATER METER #3390
        WATER METER #3391
        STAINLESS TABLE, 34" x 76"
        $RFQ
        STAINLESS TABLE, 34" x 76"
        STAINLESS TABLE, 34" x 76"
        Electrical Cabinets
        $RFQ
        Electrical Cabinets
        Electrical Cabinets
        900 GAL. S.S. TANK
        $RFQ
        900 GAL. S.S. TANK
        3 feet x 7 feet x 6 feet tall, stainless
        170 GALLON PLASTIC TANK
        $900
        170 GALLON PLASTIC TANK
        FIBERGLASS TANK, APPROX. 170 GALLONS. THE VESSAL IS 50" TALL WITH A 104" CIRCUMFIRENCE.
        3000 GAL. S/S TANK #3572
        $3,000
        3000 GAL. S/S TANK #3572
        APPROXIMATE 3000 GALLON STAINLESS STEEL TANK. APPROX. 14' TALL X 7'6" WIDE.
        TANK
        $600
        TANK
        TANK
        MIX TANK ON CART
        $RFQ
        MIX TANK ON CART
        MIX TANK ON CART
        170 GALLON STAINLESS TANK
        $500
        170 GALLON STAINLESS TANK
        USED 170 GALLON STAINLESS CONE BOTTOMED TANK.
        Tank/Hopper
        $400
        Tank/Hopper
        stainless steel, 40" diameter, 30" straight side, 40" cone
        S.S. Tank, 28" wide x 26" deep on legs
        $200
        S.S. Tank, 28" wide x 26" deep on legs
        S.S. Tank, 28" wide x 26" deep on legs
        75 gallon s.s. tank
        $300
        75 gallon s.s. tank
        One used 75 gallon tank
        125 gallon Change Can for 125 gallon Day Pony Mixer, 316 s.s.
        $2,500
        125 gallon Change Can for 125 gallon Day Pony Mixer, 316 s.s.
        One used 125 Gallon 316 Stainless Steel Flat Bottom Mixing Tank. This tank is unused and was designed for use with JH Day 100-125 Gallon Pony Mixer, 5 available
        350 gallon s.s. Tank
        $RFQ
        350 gallon s.s. Tank
        One used 350 gallon s.s. Tank
        Tank
        $RFQ
        Tank
        Tank
        50 gal. s.s.. Portable Mixing Tank w/ pneu. agitator
        $500
        50 gal. s.s.. Portable Mixing Tank w/ pneu. agitator
        One used 50 gal. s.s.. Portable Mixing Tank w/ Gast Pneu. Agitator 
        One used approx 150 gallon s.s. Tank
        $1,500
        One used approx 150 gallon s.s. Tank
        One used approx. 150 gallon s.s. Tank w/ pneumatic Mixer, 36" diam. x 38" straight side, on wheels
        2,000 gallon s.s. Storage Tank
        $8,500
        2,000 gallon s.s. Storage Tank
        One used 2,000 gallon s.s. Tank w/ Mixer
        2000 gallon Tank
        $RFQ
        2000 gallon Tank
        2001 gallon Tank
        100 gallon Stainless Tank
        $1,800
        100 gallon Stainless Tank
        (1) used approx. 100 gallon S/S portable tank, all s/s construction, 40” diameter x 22” straight side, flat top, cone bottom, 12” diameter top opening, 10” outlet, on 4 legs with casters.
        60 gallon Jacketed Kettle w/ cover, side discharge
        $1,800
        60 gallon Jacketed Kettle w/ cover, side discharge
        Jacket rated, max. W.P. 25 psi @ 300 deg. F., Board Rated
        30 gallon Kettle w/ Lid
        $RFQ
        30 gallon Kettle w/ Lid
        31 gallon Kettle w/ Lid
        Approx. 700 gallon Jacketed Tank w/ Mixer
        $7,500
        Approx. 700 gallon Jacketed Tank w/ Mixer
        Approx. 700 gallon Jacketed Tank w/ Mixer
        75 gallon stainless steel tank
        $500
        75 gallon stainless steel tank
        One used 75 gallon stainless steel tank, approximately 28" diameter x 30" straight side, dish top and bottom, 12" hand hole, 1.5", 1" top nozzles, 1" center bottom outlet on legs with 12"
        STAINLESS STEEL DUMP BINS ON CASTERS
        $300
        STAINLESS STEEL DUMP BINS ON CASTERS
        STAINLESS STEEL DUMP BINS ON CASTERS
        STAINLESS PRODUCT CART, approx. 15 c.f.
        $RFQ
        STAINLESS PRODUCT CART, approx. 15 c.f.
        ON CASTERS, WITH 6" CENTER BOTTOM BUTTERFLY VALVE, 42" x 51". FULL STAINLESS STEEL CONSTRUCTION.
        Feeder/Hopper, 10, 20 & 50 liters
        $RFQ
        Feeder/Hopper, 10, 20 & 50 liters
        (8) Stainless Steel Blending Containers: (3) 20 Liter Containers (3) 10 Liter Containers (2) 50 Liter Stainless Steel Blending Container
        9 GAL PLASTIC TANK, PORTABLE
        $RFQ
        9 GAL PLASTIC TANK, PORTABLE
        10 GAL PLASTIC TANK, PORTABLE
        3.5 cu ft Tote
        $1,500
        3.5 cu ft Tote
        One (1) used 3.5 cu ft Tote, stainless steel construction, approximately 30" diameter x 28" cone, dome top, with 18" center top port, 2" top nozzle, 8" bottom outlet with butterfly valve on legs.
        9.5 cu ft B and G tote
        $2,000
        9.5 cu ft B and G tote
        One (1) used 9.5 cu ft B and G tote, stainless steel construction, approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.
        9.5 cu ft B and G tote
        $2,000
        9.5 cu ft B and G tote
        One (1) used 9.5 cu ft B and G tote, stainless steel construction, approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.
        9.5 cu ft B and G tote,
        $2,000
        9.5 cu ft B and G tote,
        One (1) used 9.5 cu ft B and G tote, stainless steel construction, approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.
        9.5 cu ft B and G tote
        $2,000
        9.5 cu ft B and G tote
        One (1) used 9.5 cu ft B and G tote, stainless steel construction, approximately 32" diameter x 14" straight side, x 20" cone bottom, 18" top port, 1" top nozzle, 8" bottom outlet on legs.
        Tablet Press
        $RFQ
        Tablet Press
        Tablet Press
        TABLET DEDUSTER
        $RFQ
        TABLET DEDUSTER
        TABLET DEDUSTER
        TABLET DEDUSTER
        $RFQ
        TABLET DEDUSTER
        TABLET DEDUSTER
        Not Specified SORTER
        $RFQ
        Not Specified SORTER
        Not Specified SORTER
        Soft Gelatin Encapsulation Machine, Model CS-J1
        $86,500
        Soft Gelatin Encapsulation Machine, Model CS-J1
        One used Chang Sung High Speed Softgel line. Model: CS-J1. Serial: 89. Year: 1996. Equipped with 6' diameter x 10' long rotary die rolls, with minimum Gel waste Up to 4.5RPM machine speed for high output GMP machine
        Soft Gelatin Encapsulation Machine, Model CS-J1
        $86,500
        Soft Gelatin Encapsulation Machine, Model CS-J1
        One used Chang Sung High Speed Softgel line. Model: CS-J1. Serial: 87. Year: 1996. Equipped with 6' diameter x 10' long rotary die rolls, with minimum Gel waste Up to 4.5RPM machine speed for high output GMP machine
        S/S SHAKER #3730
        $RFQ
        S/S SHAKER #3730
        S/S HOPPER
        50 kg table-top Weigh Scale
        $RFQ
        50 kg table-top Weigh Scale
        51 kg table-top Weigh Scale
        Scales
        $RFQ
        Scales
        Scales
        Scales and Balances
        $250
        Scales and Balances
        3 left
        Lab Scales
        $RFQ
        Lab Scales
        Lab Scales
        10 liter Reactor
        $RFQ
        10 liter Reactor
        11 liter Reactor
        10 liter Reactor - Copy
        $RFQ
        10 liter Reactor - Copy
        11 liter Reactor - Copy
        Tier Racks
        $RFQ
        Tier Racks
        Tier Racks
        CENTRIFUGAL PUMP #3379
        $RFQ
        CENTRIFUGAL PUMP #3379
        ONE (1) STAINLESS STEEL CENTRIFUGAL PUMP. THE MOTOR IS 1/3 H.P., 3450 RPM, 115/208-230 VOLTS, 1 PHASE, 60 HZ.
        PUMP WITH 15 H.P. MOTOR
        $RFQ
        PUMP WITH 15 H.P. MOTOR
        INLET AND OUTLET I.D. IS ABOUT 2 7/16"
        PUMP WITH 30 H.P. MOTOR
        $RFQ
        PUMP WITH 30 H.P. MOTOR
        INLET AND OUTLET I.D. IS ABOUT 4".
        Centrifugal Pump
        $4,000
        Centrifugal Pump
        Centrifugal Pump
        Blowers and Pumps
        $RFQ
        Blowers and Pumps
        Blowers and Pumps
        1/2" ROTARY LOBE PUMP, S/S, 5 HP
        $RFQ
        1/2" ROTARY LOBE PUMP, S/S, 5 HP
        1/2" ROTARY LOBE PUMP, S/S, 5 HP
        Video Jet
        $RFQ
        Video Jet
        Video Jet
        BOTTLE TRANFER UNITS
        $2,500
        BOTTLE TRANFER UNITS
        STAINLESS STEEL ON ALUMINUM FRAME, WITH MAX. SIZE 7" TALL BY 3" WIDE. THE LENGTH IS 45".
        Clean In Place System
        $35,000
        Clean In Place System
        One used Clean In Place System
        Product Carts
        $RFQ
        Product Carts
        Product Carts
        Tray Drying Racks
        $500
        Tray Drying Racks
        20 available
        Lab Blender, in Connecticut
        $RFQ
        Lab Blender, in Connecticut
        Lab Blender, in Connecticut
        80 C.F. Carbon Steel RIBBON BLENDER
        $7,500
        80 C.F. Carbon Steel RIBBON BLENDER
        80 C.F. RIBBON BLENDER, CARBON STEEL, 10' LONG X 36" WITH HINGED COVERS AND 8" DISCHARGE. NO DRIVE.
        90 gallon Stainless Steel Kettles
        $1,800
        90 gallon Stainless Steel Kettles
        TWO (2) Used 90 gallon Stainless Steel Kettles, 32" diameter x 28" D, jacketed on bottom third, hemispherical bottom open top, mounted on self dumping stands on casters.
        AIRMIXER
        $RFQ
        AIRMIXER
        AIRMIXER
        HOMOGENIZING MIXER
        $RFQ
        HOMOGENIZING MIXER
        ON CART
        Mixer
        $5,500
        Mixer
        Mixer
        M-17 Resevoir Mixer
        $RFQ
        M-17 Resevoir Mixer
        M-17 Resevoir Mixer
        Tri-Mixer
        $6,500
        Tri-Mixer
        Tri-Mixer
        Drum Tumbler; Portable With (2) Drums
        $3,500
        Drum Tumbler; Portable With (2) Drums
        One used Drum Tumbler; Portable With (2) Drums
        Lodige
        $RFQ
        Lodige
        Lodige
        PREMIER MILL #3388
        $RFQ
        PREMIER MILL #3388
        470, UB5 5 H.P. MOTOR, 3470 RPM, 3 PHASE, 60 HZ.
        GRINDING MILL #3883
        $RFQ
        GRINDING MILL #3883
        ONE (1) USED GRINDING MILL, 40 H.P. MOTOR, STAINLESS STEEL CONTACT PARTS. INCLUDES STAINLESS STEEL HOLDING TANKS (CONE SHAPED).
        Categories:
        Condition:
        Manufacturer:
        • X Not Specified (309)
        Location:
        Price:
        •  to 
        1 | 2 | 3 | 4