buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 51 - 100 of 1487 matches
Sort by:
Items Per Page:  20 |  50  |  100
USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004
$RFQ
USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004
Brand: PiranhaModel: P-120Specifications: Tonnage: 120 tonsThroat depth: 12"Round bar: 1/2" - 2"Square bar: 1/2" - 1-3/8" (blades not included) Plate shear: 20" x 1/2", 18" x 3/4", 12" x 1"Angle shear: 6" x 6" x
USED COPPER / NICKEL / CHROME MANUAL DIP PLATING LINE, Stock# 11038
$RFQ
USED COPPER / NICKEL / CHROME MANUAL DIP PLATING LINE, Stock# 11038
Used copper / nickel, chrome manual dip plating lineMachine sold As-Is Where-IsAvailable as a turn-key operation including the industrial building located in the metropolitan Detroit area.  
USED HYD-MECH 18" X 29" AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V-18APC, Sto
$RFQ
USED HYD-MECH 18" X 29" AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V-18APC, Sto
Brand: Hyd-MechModel: V-18APCSpecifications: Capacity @ 90 degrees: 18"w X 29"tCapacity @ 45 degrees: 18"w X 21"tMitering capability: 45 degrees left and rightBlade dimensions: 1-1/4" x .050" x 16'11"Blade drive
USED FABRILINE 4" X 4" X 3/8" HYDRAULIC ANGLE SHEAR MODEL FAS 44, Stock# 10
$RFQ
USED FABRILINE 4" X 4" X 3/8" HYDRAULIC ANGLE SHEAR MODEL FAS 44, Stock# 10
Brand: FabrilineModel: FAS 44Specifications: Tonnage: 35 tonsMaximum stroke: 2-1/8"Cycle time: 6 seconds Angle capacity: 4" x 4" x 3/8"Voltage: 220 / 440 volt 3 phaseWeight: 400 lbs.Equipped with:&n
Fadal VMC-4020HT CNC Vertical Machining Center 2005
$RFQ
Fadal VMC-4020HT CNC Vertical Machining Center 2005
Fadal VMC-4020HT CNC Vertical Machining Center 2005 SN/ 032005108265 Table Size: 47.94” x 20” Rapid Traverse Rate (X/Y): 700 in/min Rapid Traverse Rate (Z
FADAL 3016HT VERTICAL MACHINING CENTER
$RFQ
FADAL 3016HT VERTICAL MACHINING CENTER
FADAL 3016HT VERTICAL MACHINING CENTER Year: 1994 S/N 9406486 TABLE SIZE 39" x 16" TABLE CAPACITY 2,730 LBS. RAPID FEEDS 750 IPM X-AXIS TRAVEL 30" Y-AXIS
CNC 5-AXIS MACHINING CENTRE HERMLE C30 U 2007
$RFQ
CNC 5-AXIS MACHINING CENTRE HERMLE C30 U 2007
CNC 5-AXIS MACHINING CENTRE HERMLE C30 U 2007 Specifications Axis X 650 mm Axis Y 600 mm Axis Z 500 mm Type Vertical CNC Siemens 840 D mit ShopMill Type of axis Universal head Table length 6
OKK Model PCV-55 CNC Vertical Machining Center, 2000
$RFQ
OKK Model PCV-55 CNC Vertical Machining Center, 2000
OKK Model PCV-55 CNC Vertical Machining Center, 2000 s/n 387, Mitsubishi Meldas 500 CNC Control, 50 Taper, 20 ATC, 30 HP, 8,000 RPM, 48” X 22” Table, 40” X 22” X 20” Travels
Haas VF-3 VMC, 1998
$RFQ
Haas VF-3 VMC, 1998
Haas VF-3 VMC, 1998 S/N 15354 X Axis Travel: 40″ Y Axis Travel: 20″ Z Axis Travel: 25″ Rapid Rate X Axis: 710 IPM Rapid Rate Y Axis: 710 IPM Rapid Rate Z Axis: 710 IPM Table Size: 48″ X 18″ Max Table Load: 3,5
1996 Mazak SQT 18MS CNC Lathe with Sub-Spindle & Live Tooling
$RFQ
1996 Mazak SQT 18MS CNC Lathe with Sub-Spindle & Live Tooling
1996 Mazak SQT 18MS CNC Lathe with Sub-Spindle & Live Tooling serial no.114509 Specifications: Max. Swing: 20.90″ Swing Over Carriage: 15.74″ Max. Machining Diameter: 11.75″ Max. Distance Between Spindles:
USED KEINS 1-3/4" 3-AXIS CNC DUAL STACK TUBE BENDER MODEL KB-45ND, Stock# 11035, Year
$RFQ
USED KEINS 1-3/4" 3-AXIS CNC DUAL STACK TUBE BENDER MODEL KB-45ND, Stock# 11035, Year
Brand: KeinsModel: KB-45NDSpecifications: Thin wall metal capacity: 1.77" x .07" wall (45mm x 2mm)Thick wall metal capacity: 1.68" x .1" wall (42.7mm x 2.6mm)Aluminum capacity: 2" x .07" wall (50.8mm x 2mm)Stain
USED RAMCO 37" WIDE BELT WET SANDER MODEL 37T, Stock# 11033, Year: 2005
$RFQ
USED RAMCO 37" WIDE BELT WET SANDER MODEL 37T, Stock# 11033, Year: 2005
Brand: RamcoModel: 37TSpecifications: Belt size: 37"w X 60" aroundMax material thickness: 6"Main motor: 20 H.P.Belt speed: 0 - 80 FPM (frequency drive)Belt tension: Pneumatic Voltage: 480 volt 3 phaseEq
USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11020, Year: 2012
$RFQ
USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11020, Year: 2012
Brand: Aker WadeModel: Twinmax 30Specifications: Maximum power output: 60 KWMaximum power output per station: 30 KWMaximum output current per station:@ 24V: 500 amps@ 36V: 500 amps@ 48V: 500 amps@ 80V: 300 ampsA
USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11019, Year: 2012
$RFQ
USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11019, Year: 2012
Brand: Aker WadeModel: Twinmax 30Specifications: Maximum power output: 60 KWMaximum power output per station: 30 KWMaximum output current per station:@ 24V: 500 amps@ 36V: 500 amps@ 48V: 500 amps@ 80V: 300 ampsA
USED CINCINNATI 1/4" X 10' HYDRAULIC SHEAR WITH CNC FRONT AND REAR GAUGING MODEL 250H
$RFQ
USED CINCINNATI 1/4" X 10' HYDRAULIC SHEAR WITH CNC FRONT AND REAR GAUGING MODEL 250H
Brand: CincinnatiModel: 250HS 10Specifications: Capacity: 26 gauge - 1/4"Cutting length: 10'2"Max rake: 3/8" per footHold down force: 8.5 tonsNumber of hold downs: 12Height under guard: 1/2"Back gauge range: 48"
USED CINCINNATI 350 TON X 12', "PROFORM" SERIES 5-AXIS CNC HYDRAULIC PRESS BRAKE
$RFQ
USED CINCINNATI 350 TON X 12', "PROFORM" SERIES 5-AXIS CNC HYDRAULIC PRESS BRAKE
Brand: CincinnatiModel: 350PF10Specifications: Tonnage: 350 TonsLength of bed: 12'Distance between housings: 10'6"Stroke length: 16"Throat depth: 10" Open height: 24"Shut height: 8"Distance from floor t
USED PIRANHA P-3 50 TON HYDRAULIC IRONWORKER, Stock# 11027, Year: 1990
$RFQ
USED PIRANHA P-3 50 TON HYDRAULIC IRONWORKER, Stock# 11027, Year: 1990
Brand: PiranhaModel: P-3Specifications:Angle Shear at 90 deg: 5" x 5" x 3/8" Number of Built-In Work Stations: 5Punching: 1" thru 1/2" thick materialPunch Tonnage: 50 tonsPlaten Size: 10" x 17" Throat D
USED DONALDSON TORIT 4,000 CFM DUST COLLECTOR MODEL DFT2-8, Stock# 11021, Year: 1996
$RFQ
USED DONALDSON TORIT 4,000 CFM DUST COLLECTOR MODEL DFT2-8, Stock# 11021, Year: 1996
Brand: Donaldson ToritModel: DFT2-8Specifications:Number of filters: 8Filter area: 2,032 sq. ft. Number of valves: 4Seismic rating: Zone 4Wind load: 100 MPHCompressed air: 90 - 100 PSICFM: 4,000 @ 10" static pre
Okuma Captain L-370BB - Horizontal Lathe 2003
$RFQ
Okuma Captain L-370BB - Horizontal Lathe 2003
Okuma Captain L-370BB - Horizontal Lathe 2003 S/N 0494 CNC Control OSP-E100L Specifications Max Swing Over Bed: 20.08″ Max Turning Diameter: 14.56″ Max Turning Length: 20.47″ Cross Travel (X-Axis): 10.23″
USED CLARK 6,000 LB ELECTRIC FORKLIFT MODEL ECX 30, Stock# 11017, Year: 2014
$RFQ
USED CLARK 6,000 LB ELECTRIC FORKLIFT MODEL ECX 30, Stock# 11017, Year: 2014
Brand: ClarkModel: ECX 30Specifications: Load capacity: 6,000 Lbs. Power unit: 36 VoltTire type: Cushion non markingMaximum lift height: 189"Fork length: 60"Service weight: 8,743 Lbs. Equipped
USED WHITNEY HYDRAULIC CNC 40 TON PUNCH 130 AMP PLASMA MODEL 657, Stock# 11028, Year: 2012
$RFQ
USED WHITNEY HYDRAULIC CNC 40 TON PUNCH 130 AMP PLASMA MODEL 657, Stock# 11028, Year: 2012
Brand: WhitneyModel: 657Specification: Punching force: 40 tonsX-axis travel: 81.77"Y-axis travel: 50.59"Nominal distance between punch and torch: 15"Rapid speed: 1,000 IPMStroke rate: 80 SPM @ 1" centersPunch cy
USED HEM 16" X 20" FULLY AUTOMATIC HORIZONTAL BANDSAW MODEL H105LA-4, Stock# 110
$RFQ
USED HEM 16" X 20" FULLY AUTOMATIC HORIZONTAL BANDSAW MODEL H105LA-4, Stock# 110
Type (Auto, Manual, Semi) automatic Brand: HemModel: H105LA-4Specifications: 
Fadal VMC 4020 Vertical CNC Machining Center
$RFQ
Fadal VMC 4020 Vertical CNC Machining Center
Fadal VMC 4020 Vertical CNC Machining Center Year of Mfg: 2003 Control: Fadal 32MP Table Size: 48" x 20" Travels: X-Axis: 40" Y-Axis: 20" Z-Axis: 20" Spindle Taper: CAT 40 S
  • X axis: 40"
  • Y axis: 20"
    Cincinnati 250HS 1/4" x 10' Hydraulic Shear
    $RFQ
    Cincinnati 250HS 1/4" x 10' Hydraulic Shear
    Cincinnati 250HS 1/4" x 10' Hydraulic Shear Year of Mfg: 1999 Control: Cincinnati Multi Axis Gauge Control Capacity: 1/4" Mild Steel Cutting Length: 122 3/4" Max. Rake inch/foot: 3/8&q
    • Maximum thickness: 0.25"
    • Cutting length: 120"
      Fadal VMC-4020HT CNC Vertical Machining Center 1994
      $RFQ
      Fadal VMC-4020HT CNC Vertical Machining Center 1994
      Fadal VMC-4020HT CNC Vertical Machining Center 1994 SN/ 9402782 Table Size: 47.94” x 20” Rapid Traverse Rate (X/Y): 700 in/min Rapid Traverse Rate (Z):
      USED MESSER 10' X 7' 260 AMP HIGH-DEFINITION CNC PLASMA SYSTEM MODEL MMPLUS, Stock# 11013,
      $RFQ
      USED MESSER 10' X 7' 260 AMP HIGH-DEFINITION CNC PLASMA SYSTEM MODEL MMPLUS, Stock# 11013,
      Brand: MesserModel: MMplusSpecifications: Cutting area: 10' L x 7' WNumber of heads: 1Rapid traverse speed: 1,200 IPMContouring speed: 12 in./sec.Table capacity: 2" max thick plateMild steel cutting capacity:Dro
      NEW WESTBROOK 120" HEAVY DUTY GRAVITY ROLLER CONVEYOR Stock# 11023
      $RFQ
      NEW WESTBROOK 120" HEAVY DUTY GRAVITY ROLLER CONVEYOR Stock# 11023
      Brand: Westbrook120 long Heavy Duty Type II Gravity Roller Conveyor32 between frames3.5 diameter rollers1 pinned hex axleprecision grease packed bearingsrolls set ¾ low on 12 centers in 6 structural cha
      NEW WESTBROOK 60" HEAVY DUTY GRAVITY ROLLER CONVEYOR Stock# 11022
      $RFQ
      NEW WESTBROOK 60" HEAVY DUTY GRAVITY ROLLER CONVEYOR Stock# 11022
      Brand: Westbrook60 long Heavy Duty Type II Gravity Roller Conveyor32 between frames3.5 diameter rollers1 pinned hex axleprecision grease packed bearingsrolls set ¾ low on 12 centers in 6 structural chan
      USED W.F. WELLS 25" X 40" MODEL B-25-III DUAL COLUMN HORIZONTAL BANDSAW, Stock#
      $RFQ
      USED W.F. WELLS 25" X 40" MODEL B-25-III DUAL COLUMN HORIZONTAL BANDSAW, Stock#
      Brand: W.F. WellsModel: B-25-IIISpecifications: Capacity: 25" H x 40" W @ 90 degreesCapacity: 25" H x 24" W @ 45 degreesWeight capacity: 15,000 Lbs. Blade size: 2-5/8" x 25'6" x .063"Blade speeds: 115 -
      USED 10' X 24" WIDE ROLLER CONVEYORS (4) SECTIONS, Stock# 11016
      $RFQ
      USED 10' X 24" WIDE ROLLER CONVEYORS (4) SECTIONS, Stock# 11016
      (4) 10' Roller Conveyors x 24" Wide28 1/4" Overall Width, 25" Between Frames2 1/2" Roller Diameter5/8" Hex Shafts32" Roller Height  Above GroundRollers Set High in Frames on 6" Centers in 4" Structural Channel F
      USED 70' POWERED ROLLER CONVEYOR WITH CROSS TRANSFER CONVEYOR, Stock# 10991-1
      $RFQ
      USED 70' POWERED ROLLER CONVEYOR WITH CROSS TRANSFER CONVEYOR, Stock# 10991-1
      Powered conveyor system consisting of:   40' x 46" wide powered infeed conveyor with top bundle clamp  30' x 46" wide powered outfeed conveyor(6) 15' long powered cross transfer conveyors&n
      USED MESSER APPLLO 10' X 25' 200 AMP CNC PLASMA / OXY CUTTING SYSTEM, Stock# 11014, Year:
      $RFQ
      USED MESSER APPLLO 10' X 25' 200 AMP CNC PLASMA / OXY CUTTING SYSTEM, Stock# 11014, Year:
      Brand: MesserModel: Apollo10' x 25' Downdraft tableBurny Phantom CNC control1 Oxygen / acetylene head1 Plasma headHypertherm MAX 200 plasma cutting power unitDowndraft table complete with exhaust unit consisting of a blo
      USED PEERLESS 10" X 14" FULLY AUTOMATIC HORIZONTAL BANDSAW MODEL HB-1014A, Stock
      $RFQ
      USED PEERLESS 10" X 14" FULLY AUTOMATIC HORIZONTAL BANDSAW MODEL HB-1014A, Stock
      Brand: PeerlessSpecifications: Capacity: 10" x 14" rectangularCapacity: 13" RoundBlade size: 150" x 1-1/4" x .042"Blade wheels: 16" diameterBlade guides: Roller bearing and carbide guidesBlade speeds: 60 - 400 F
      USED CLOOS HIGH PERFORMANCE DUAL STATION ROBOTIC WELDING CELL, Stock# 11012
      $RFQ
      USED CLOOS HIGH PERFORMANCE DUAL STATION ROBOTIC WELDING CELL, Stock# 11012
      Brand: CloosCLOOS High Performance Dual Station Robotic Welding CellCell Description:The Cell consists of a fully programmable 7-Axis welding robot programmed to travel longitudinally along a 10 M long base. Vertical tra
      USED METAL MUNCHER DUAL OPERATOR 40 TON HYDRAULIC IRONWORKER MODEL MM-40, Stock# 11010, Ye
      $RFQ
      USED METAL MUNCHER DUAL OPERATOR 40 TON HYDRAULIC IRONWORKER MODEL MM-40, Stock# 11010, Ye
      Tonnage 40 tons Power 5 horsepower
      Rottler F9A
      $52,000
      Rottler F9A
      Overview The FA machines are the industry standard worldwide for boring bars. Designed for all automotive blocks up to big block V8's and small diesel blocks, the F9A will produce accurate bores for a lifetime. The
      USED HYMSON 5' X 10' 3,000 WATT FIBER OPTIC LASER MODEL HF3015B, Stock# 11011, Year: 2018
      $RFQ
      USED HYMSON 5' X 10' 3,000 WATT FIBER OPTIC LASER MODEL HF3015B, Stock# 11011, Year: 2018
      Brand: HymsonModel: HF3015BSpecifications: X-axis travel: 59" (1,500mm)Y-axis travel: 118" (3,000mm)Z-axis travel: 9.4" (240mm)X/Y axis max speed: 5,511 IPM (140m/min)Max work load: 2,200 Lbs. (1000kg)Max. cutti
      USED HEM 24" X 28.5" SEMI-AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V140HM60,
      $RFQ
      USED HEM 24" X 28.5" SEMI-AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V140HM60,
      Throat Cap 24 inches Work Height 28.5 inc
      2013 HAAS VF2SS
      $RFQ
      2013 HAAS VF2SS
      2013 HAAS VF2SS S/N 1083684 Specs: X Axis Travel: 30" Y Axis Travel: 16" Z Axis Travel: 20" Rapid Rate X Axis: 1,400 IPM Rapid Rate Y Axis: 1,400 IPM Rapid Rate Z Axis: 1,400 IPM Table Size: 36&q
      Milltronics Partner VM17 60"X 16" Vert Machining Center W/Centuri
      $RFQ
      Milltronics Partner VM17 60"X 16" Vert Machining Center W/Centuri
      Milltronics Partner VM17 60"X 16" Vert Machining Center W/Centurion V Control New 97 Make: Milltronics serial 4105 Model: Partner VM-17 Year New: 1997 Control: Centurion VI Table Size: 45" X 16"
      Milltronics Partner VM24 Series B CNC Vertical Machining Center 2000
      $RFQ
      Milltronics Partner VM24 Series B CNC Vertical Machining Center 2000
      Milltronics Partner VM24 Series B CNC Vertical Machining Center 2000 Equipped With: Milltronics Centurion 6 CNC Control, Cat-40 Taper 8000 Max RPM Spindle, 20 Station Carousel Tool Changer, Standard Coolant System wit
      Gildemeister CTX 600 Cnc Lathe 2000
      $RFQ
      Gildemeister CTX 600 Cnc Lathe 2000
      Gildemeister CTX 600 Cnc Lathe 2000 Number of spindles : 1 - Number of axes : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle speeds : 3050 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 650 [mm]
      USED PACIFIC 90 TON X 10' 2-AXIS CNC HYDRAULIC PRESS BRAKE MODEL J90-10, Stock# 10984, Yea
      $RFQ
      USED PACIFIC 90 TON X 10' 2-AXIS CNC HYDRAULIC PRESS BRAKE MODEL J90-10, Stock# 10984, Yea
      Tonnage 90 tons Hyd/Mech hydraulic
      USED HYD-MECH MODEL H-20A 20" X 20" FULLY AUTOMATIC DUAL COLUMN BANDSAW, Stock#
      $RFQ
      USED HYD-MECH MODEL H-20A 20" X 20" FULLY AUTOMATIC DUAL COLUMN BANDSAW, Stock#
      Rect-Cap (H) 20 inches Rect-Cap (W) 20 in
      USED CINCINNATI 5' X 10' DUAL SHUTTLE TABLE 4,000 WATT CO2 LASER MODEL CL-440, Stock# 1100
      $RFQ
      USED CINCINNATI 5' X 10' DUAL SHUTTLE TABLE 4,000 WATT CO2 LASER MODEL CL-440, Stock# 1100
      Sheet-W 5 feet Sheet-L 10 feet
      Bridgeport Romi EZ Path II
      $RFQ
      Bridgeport Romi EZ Path II
      Bridgeport Romi EZ Path II 1997 Maximum swing: 16.5" Maximum swing over cross slide: 8.6" Distance between centers: 40" X-axis travel: 8.6" Z-axis trave
      HWACHEON HI-TECH 400A 2004
      $RFQ
      HWACHEON HI-TECH 400A 2004
      HWACHEON HI-TECH 400A 2004 SPECIFICATIONS MAX SWING 23.6" MAIN MOTOR 30 HP SPINDLE SPEED 1,800 RPM FEED RAPID TRAVERSE - X/Z AXIS 787 IPM Z-AXIS TRAVEL 50&qu
      USED HAAS SL-20T CNC LATHE WITH LIVE TOOLING, Stock# 11000 Year: 2006
      $RFQ
      USED HAAS SL-20T CNC LATHE WITH LIVE TOOLING, Stock# 11000 Year: 2006
      Brand: HaasModel: SL-20TSpecifications: # of axis: 3Swing: 21"Max turning length: 22.5"Turning diameter: 11.75"Center distance: 22.5"Chuck size: 8"Bar capacity: 2.50"X axis travel: 8.4"Z axis travel: 22.5"C axis
      Nakamura-tome WT-300 - Horizontal Lathe 2005
      $RFQ
      Nakamura-tome WT-300 - Horizontal Lathe 2005
      Nakamura-tome WT-300 - Horizontal Lathe 2005 Year 2005 S/N M301007 Control Type Fanuc 18i-TB # Axis 8 Swing 12.2" Turning Diameter 10.6" Center Distance 43.3" Chuck Size 10" Bar Capaci
      USED HYD-MECH FULLY AUTOMATIC 10" DUAL COLUMN HORIZONTAL BANDSAW MODEL H-10A, Stock#
      $RFQ
      USED HYD-MECH FULLY AUTOMATIC 10" DUAL COLUMN HORIZONTAL BANDSAW MODEL H-10A, Stock#
      Rect-Cap (H) 10 inches Rect-Cap (W) 10 in
      Categories:
      Condition:
      Manufacturer:
      Location:
      • X Michigan (1487)
      Price:
      •  to 
      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>