buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 601 - 700 of 20552 matches
Sort by:
Items Per Page:  20 |  50 |  100
2022 - 1,500 Watt IPG Light Weld Portable Laser Welder
$RFQ
2022 - 1,500 Watt IPG Light Weld Portable Laser Welder
Laser Power 1500 Watts High Peak Power 2500 Watts Mode Storage Capacity 74 Wobble Length .2" Wobble Frequency Up to 300 Hz Equipped with: IPG Power Source (1500W Average Power w/ 2500W Peak Power) Welding G
  • Power: 1.5KVA
    30,000 LB X 48" B & K UNCOILER AND COIL CAR (14505)
    $RFQ
    30,000 LB X 48" B & K UNCOILER AND COIL CAR (14505)
    Max Weight of Coil 30000 pounds Max Width of Coil
    2-1/4" FENN MODEL 4-1/2F LONG 2 DIE SWAGING MACHINE (14504)
    $RFQ
    2-1/4" FENN MODEL 4-1/2F LONG 2 DIE SWAGING MACHINE (14504)
    Capacity, Tubes 2.250 inches Dimensions 5
    20,000 LB WEAN UNCOILER AND COIL CAR (14503)
    $RFQ
    20,000 LB WEAN UNCOILER AND COIL CAR (14503)
    Max Weight of Coil 20000 ounces Max Width of Coil
    CWP 20,000 LBS COIL REEL WITH COIL CAR MODEL 6R-36
    $RFQ
    CWP 20,000 LBS COIL REEL WITH COIL CAR MODEL 6R-36
    Max Weight of Coil 20000 pounds Max Width of Coil
    FENN 6F 4 DIE ROTARY SWAGING MACHINE, CAPACITY 4.5" TUBING, 2.250" SOLIDS, Stock
    $RFQ
    FENN 6F 4 DIE ROTARY SWAGING MACHINE, CAPACITY 4.5" TUBING, 2.250" SOLIDS, Stock
    4.5" FENN MODEL 6F 4 DIE SWAGERSTOCK #14500TYPE MACHINE:                     4 DIE ROTARY SWAGING MACHINEMANUFACTURER:&am
    4" VAILL MODEL 511 TUBE END FORMING MACHINE (14499)
    $RFQ
    4" VAILL MODEL 511 TUBE END FORMING MACHINE (14499)
    Tube Dia 5 inches 4″ Torrington Vaill 511 Tube End FormerStock # 14499&nb
    11" Swing 18" Centers Hardinge HLV-H Reground Bed New Turcite PRECISION ENGINE
    $30,500
    11" Swing 18" Centers Hardinge HLV-H Reground Bed New Turcite PRECISION ENGINE
    HARDINGE PRECISION LATHE MODEL: HLV-H, S/N: HLV-H-15475-T, NEW: 2000 MACHINE RECONDITIONED IN 2025   SPECIFICATIONS: SPINDLE CONSTRUCTION.................... HARDINGE BALL BEARING SPINDLE NOSE THREAD .......
    15" Swing 30" Centers Clausing-Colchester 15" 8030 ENGINE LATHE, Inch/Metri
    $4,950
    15" Swing 30" Centers Clausing-Colchester 15" 8030 ENGINE LATHE, Inch/Metri
    15" x 50" CLAUSING-COLCHESTER ENGINE LATHE MODEL: 8030, S/N: 6/0013/02841, NEW: 1975   SPECIFICATIONS: SWING OVER BED ....................... 15-1/4" SWING OVER CROSS SLIDE ............... 9-1/2&
    88" Table 30HP Spindle Kearney Trecker 430TF-20 HORIZONTAL MILL, #50 Taper,2 Arbor S
    $RFQ
    88" Table 30HP Spindle Kearney Trecker 430TF-20 HORIZONTAL MILL, #50 Taper,2 Arbor S
    KEARNEY & TRECKER HORIZONTAL MILLING MACHINE MODEL: #430 TF-20, S/N: 57-1003-05, NEW: 1970 W/DOUBLE SWIVEL VERTICAL ATTACHMENT   SPECIFICATIONS: TABLE WORKING SURFACE .................. 19-1/2" X 88&qu
    Star SR-16R 7-AXIS CNC SWISS TYPE LATHE, Fanuc 18iT, LNS GT 326E Mag. Barfeed
    $RFQ
    Star SR-16R 7-AXIS CNC SWISS TYPE LATHE, Fanuc 18iT, LNS GT 326E Mag. Barfeed
    STAR SR-16R SWISS TYPE CNC LATHE   EQUIPPED WITH:  - FANUC 18iT CNC CONTROL  - FULL C -AXIS ON MAIN & SUBSPINDLES  - 6 POSITION VERTICAL GANG SLIDE (FOR MAIN SPINDLE)  - 4 POSITION HORI
    42" Table 3HP Spindle Siber Hegner RB-1 First 305VS Bed Mill VERTICAL MILL, Vari-Spee
    $RFQ
    42" Table 3HP Spindle Siber Hegner RB-1 First 305VS Bed Mill VERTICAL MILL, Vari-Spee
    SIBER HEGNER VERTICAL BED TYPE MILL MODEL: RB-1, S/N: 78070810, NEW: 1988   SPECIFICATIONS: TABLE WORKING SURFACE ............... 9" x 42" SPINDLE RANGE:   SPINDLE SPEED (LOW RANGE) .......
    4.3" Spindle 63" X Axis Summit HBM-110 HORIZONTAL BORING MILL, #50 PDB, Rotary T
    $RFQ
    4.3" Spindle 63" X Axis Summit HBM-110 HORIZONTAL BORING MILL, #50 PDB, Rotary T
    SUMMIT TABLE TYPE HORIZONTAL BORING MILL MODEL: HBM-110, S/N: 16018, MFG: 2014   SPECIFICATIONS: SPINDLE: DIAMETER OF SPINDLE ................. 4.3″ TAPER OF SPINDLE .................... #50 SPINDLE SP
    Republic-Lagun TCG-106, NO. 2 Type, 2016, Helical Grinding Attch. TOOL CUTTER GRINDER, Mo
    $RFQ
    Republic-Lagun TCG-106, NO. 2 Type, 2016, Helical Grinding Attch. TOOL CUTTER GRINDER, Mo
      No. 2 Republic-Lagun Model: TCG-1016   Universal Tool and Cutter Grinder   ** Loaded with Many Accessories **     S/N: 22764    New: 2016   *** Lik
    17.7" Swing Leadwell LTC-20BM - LIVE TOOLING CNC LATHE, Fanuc 0i-TD, 8" Chk., Ta
    $RFQ
    17.7" Swing Leadwell LTC-20BM - LIVE TOOLING CNC LATHE, Fanuc 0i-TD, 8" Chk., Ta
    LEADWELL LTC-20BM CNC TURNING/MILLING CENTER NEW: 2012   SPECIFICATIONS: Swing                    17.7 inches Turni
    6" Width 18" Length Okamoto ACC-618DX3, 1995, PROG. AUTO IDF, 3X AUTO FEEDS SURF
    $RFQ
    6" Width 18" Length Okamoto ACC-618DX3, 1995, PROG. AUTO IDF, 3X AUTO FEEDS SURF
      6" X 18" OKAMOTO "HIGH-PRECISION" URFACE GRINDER    WITH "DX" PROGRAMMABLE AUTO INCREMENTAL DOWNFEED,    WITH MANY OPTIONAL ACCESSORIES (SEE BELO
    12" Width 24" Length Chevalier FSG-3A1224, 2016, 3X AUTO FEEDS, AUTO IDF SURFACE
    $RFQ
    12" Width 24" Length Chevalier FSG-3A1224, 2016, 3X AUTO FEEDS, AUTO IDF SURFACE
      12" X 24" CHEVALIER PRECISION SURFACE GRINDER   WITH PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED     MODEL: FSG-3A1224      NEW: 2016   MAX.
    Okuma LB-35III CNC LATHE, OSP P300L, 15" Chk., Toolsetter, Chip Conv.
    $RFQ
    Okuma LB-35III CNC LATHE, OSP P300L, 15" Chk., Toolsetter, Chip Conv.
    Okuma LB35 III x 850 CNC Chucker New: 2016   SPECIFICATIONS: Swing Over Bed:           27.56" Swing Over Carriage:      16.93"
    50" Table 3HP Spindle Sharp LMV-50 VERTICAL MILL, Vari-speed,R-8, Newall DRO, Power T
    $RFQ
    50" Table 3HP Spindle Sharp LMV-50 VERTICAL MILL, Vari-speed,R-8, Newall DRO, Power T
    SHARP VERTICAL MILLING MACHINE MODEL: LMV-50, S/N: 70330329, MFG: 2008   SPECIFICATIONS: WORKING AREA OF TABLE ................ 9" x 50" TABLE LONGITUDINAL TRAVEL ............ 37" TABLE CROSS TR
    Nakamura-Tome WT-150MMY CNC LATHE
    $RFQ
    Nakamura-Tome WT-150MMY CNC LATHE
    2004 Nakamura Tome WT-150MMY Twin Spindle, Dual Turret, & Live Tooling CNC Lathe   Specifications: Bar Capacity                 
    27.6" X Axis 17.7" Y Axis Brother TC-22B-0 VERTICAL MACHINING CENTER
    $RFQ
    27.6" X Axis 17.7" Y Axis Brother TC-22B-0 VERTICAL MACHINING CENTER
    BROTHER 5-AXIS DRILL AND TAPPING CENTER MODEL: TC-22B-0, NEW 2008   SPECIFICATIONS: X ........................ 27.6" Y ........................ 17.7" Z ........................ 16.1" POWER ..
    41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
    $RFQ
    41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
    MAZAK CNC VERTICAL MACHINING CENTER MODEL: VCN 510 C-II NEXUS,  S/N: 245787,   MFG: 2013      SPECIFICATIONS: X-AXIS ..................................... 41.03" Y-AXIS ........
    41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
    $RFQ
    41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
    MAZAK CNC VERTICAL MACHINING CENTER MODEL: VCN 510 C-II NEXUS, S/N: 221971,   MFG: 2010      SPECIFICATIONS: X-AXIS ..................................... 41.03" Y-AXIS ..............
    110 Ton 118" Bed Amada FBD1030NT PRESS BRAKE, AMNC-PC
    $44,500
    110 Ton 118" Bed Amada FBD1030NT PRESS BRAKE, AMNC-PC
      110 TON AMADA HYDRAULIC UP-ACTING PRESS BRAKE    MODEL FBD-1030NT        S/N 10300060        NEW 2000   TONNAGE CAPACI
    25 Ton 48" Bed Accurpress 7254 PRESS BRAKE
    $24,500
    25 Ton 48" Bed Accurpress 7254 PRESS BRAKE
      4' X 25 TON ACCURPRESS HYD. PRESS BRAKE MODEL 7254         S/N 6823         NEW 2001   Capacity ............................
    Landis 4R OD GRINDER
    $RFQ
    Landis 4R OD GRINDER
     24" X 96" LANDIS 4R PLAIN OD GRINDER   SPECIFICATIONS: 24" SWING 96" BETWEEN CENTERS 30" X 4" X 12" DIAMETER GRINDING WHEEL WHEEL GUARD CAN ACCOMMODATE UPTO AN 8"
    2500Lb Cap. 12" Width Press Room Eqpt PR-122500-DC-GLGRSBD UNCOILER
    $9,950
    2500Lb Cap. 12" Width Press Room Eqpt PR-122500-DC-GLGRSBD UNCOILER
      2,500 LB. PRESS ROOM EQUIP. MOTORIZED UNCOILER MODEL PR-122500-DC-GLGRSBD           S/N 0116-002         NEW 2016  
    Okuma ES-L6 CNC LATHE, U10L, Collet Chuck, Chip Conveyor
    $RFQ
    Okuma ES-L6 CNC LATHE, U10L, Collet Chuck, Chip Conveyor
    OKUMA ES-L6 CNC TURNING CENTER NEW: 2004   VIDEO LINK https://youtu.be/9G-c3tLP7gs?si=cVSrZ0cSHdj8UIIm   SPECIFICATIONS: NO. OF CONTROLLED AXES .................... 2 SWING OVER BED .....................
    17.72" Swing 11.02" Centers Okuma ES-L6II CNC LATHE, U10L, Collet Chuck, Tailsto
    $RFQ
    17.72" Swing 11.02" Centers Okuma ES-L6II CNC LATHE, U10L, Collet Chuck, Tailsto
    OKUMA ES-L6II CNC TURNING CENTER NEW: 2006   VIDEO LINK: https://youtu.be/ERf_WAWbAho?si=SgK3F-77joAjdQFQ   SPECIFICATIONS: Swing Over Bed ............... 17.72” Swing Over Carriage .......... 13.7
    Goodway GLS-3000YS LESS THAN 100 CUT HOURS CNC LATHE, Fanuc 0i-TF, Live tool, Subspndl,
    $RFQ
    Goodway GLS-3000YS LESS THAN 100 CUT HOURS CNC LATHE, Fanuc 0i-TF, Live tool, Subspndl,
    GOODWAY (YAMA SEIKI) GLS-3000YS NEW: 12/2018            *****  UNDER 100 CUT HOURS OF USE  ***** FOR MORE INFORMATION: Call Mike at 973-497-7540
    Tsugami MO8SY-II CNC LATHE
    $RFQ
    Tsugami MO8SY-II CNC LATHE
    TSUGAMI M08SY-II MULTI-FUNCTION CNC LATHE NEW: 2023         ****** LESS THAN 300 CUT HOURS OF USE ******   EQUIPPED WITH:  - FANUC 0i-TF CNC CONTROL  - ROYAL QG65
    Okuma Crown L1060 Big Bore CNC LATHE, U10L, Royal 3J, 12" Chk., Tailstock
    $RFQ
    Okuma Crown L1060 Big Bore CNC LATHE, U10L, Royal 3J, 12" Chk., Tailstock
    OKUMA CROWN L1060 BIG BORE CNC TURNING CENTER NEW: 2000 FOR MORE INFORMATION: Call Mike at 973-497-7540
    Okuma Captain L470M - LIVE MILLING CNC LATHE, OSP P200L, 12" Chk.,
    $RFQ
    Okuma Captain L470M - LIVE MILLING CNC LATHE, OSP P200L, 12" Chk.,
    OKUMA CAPTAIN L470M/1250 CNC TURNING CENTER w/LIVE MILLING NEW: 2008   Video Link: https://youtu.be/7yOlHEfzMl0?si=pJRaB86U5N-plzNW Video Link: https://youtu.be/egQ6o1APW7E?si=cNgymysWkVb_0oNm    
    0.25" Cap. 96" Width Cincinnati 250HS8 SHEAR
    $32,500
    0.25" Cap. 96" Width Cincinnati 250HS8 SHEAR
      8' x 1/4" CINCINNATI HYDRAULIC SHEAR MODEL 250HS        S/N 51743        NEW 2002   Capacity ........................... 8 x 1/4&
    5.12" Spindle 118" X Axis Toshiba-Shibaura BFT-13C-W3 HORIZONTAL BORING MILL, #5
    $RFQ
    5.12" Spindle 118" X Axis Toshiba-Shibaura BFT-13C-W3 HORIZONTAL BORING MILL, #5
    5" TOSHIBA TABLE TYPE HORIZONTAL BORING MILL MODEL: BFT-13C-W3, S/N: 153320, NEW: 1979   SPECIFICATIONS: DIAMETER OF SPINDLE .................. 5.12" TAPER IN SPINDLE ..................... #50 DIAMET
    42" Table 3HP Spindle Alliant 42VC VERTICAL MILL, Vari-Speed, R-8, acu-Rite 2-Axis DR
    $4,950
    42" Table 3HP Spindle Alliant 42VC VERTICAL MILL, Vari-Speed, R-8, acu-Rite 2-Axis DR
    ALLIANT VERTICAL MILLING MACHINE MODEL: 42VC, S/N: 73115069, NEW: 2003   SPECIFICATIONS: TABLE SIZE ........................... 9" X 42" NUMBER OF T-SLOTS .................... 3 MAXIMUM WEIGHT OF
    9" Swing Hardinge DSM-59 SECOND OP LATHE, Vari-Speed,Turret Cross Slide, 5C Collet,
    $4,950
    9" Swing Hardinge DSM-59 SECOND OP LATHE, Vari-Speed,Turret Cross Slide, 5C Collet,
    HARDINGE SECOND OPERATION LATHE MODEL: DSM 59,  S/N DV-59-14613,  NEW 1979   SPECIFICATIONS: SPINDLE CAPACITY WITH ROUND 5C COLLETS ... 1-1/16" HEXAGON 5C COLLETS ....................... 7/8"
    Haas SL-20T CNC LATHE, Toolsetter, Tailstock, Parts Catcher
    $22,500
    Haas SL-20T CNC LATHE, Toolsetter, Tailstock, Parts Catcher
    HAAS SL-20T CNC TURNING CENTER NEW: 2004   VIDEO LINK: https://youtu.be/qIsyRh5XGRI?si=Z-KuDJX0QWx82pAN   SPECIFICATIONS: MAXIMUM SWING OVER FRONT APRON ....... 20" SWING OVER CROSS SLIDE ..........
    140 Ton 144" Bed Wysong MTH-140-144 PRESS BRAKE
    $RFQ
    140 Ton 144" Bed Wysong MTH-140-144 PRESS BRAKE
      140 Ton x 12' Wysong Hydraulic Press Brake Model MTH-140-144       S/N MT5-101      New 1991   Capacity ........................ 140 Ton x 12' Lengt
    11.8" Swing 13.4" Centers Tschudin HTG-310, 1991, RISERS, FULL AUTO CYCLE OD GRI
    $RFQ
    11.8" Swing 13.4" Centers Tschudin HTG-310, 1991, RISERS, FULL AUTO CYCLE OD GRI
    11.8" X 13.4" TSCHUDIN "SWISS" SUPER-PRECISION      UNIVERSAL CYLINDRICAL GRINDER                
    Opti-Dress E, FACTSTOR DRO, COMPLETE, REFURBISHED BY USA REP WHEEL DRESSER
    $RFQ
    Opti-Dress E, FACTSTOR DRO, COMPLETE, REFURBISHED BY USA REP WHEEL DRESSER
      "OPTI-DRESS" E FORM WHEEL DRESSER"   "REFURBISHED BY "PRECISION INT'L",  THE USA REP. FOR OPTI-DRESS"   (MADE BY PG TECHNOLOGY IN GREAT BRITIAN)  
    Haas ST-10Y CNC LATHE
    $RFQ
    Haas ST-10Y CNC LATHE
    HAAS ST-10Y CNC TURNING LATHE w/Y-AXIS, LIVE MILLING NEW: 2018   SPECIFICATIONS: SWING OVER BED 25.25" MAX CUTTING DIAMETER 12" MAX CUTTING LENGTH 16" X-AXIS TRAVEL 7.8" Y-AXIS Yes Y-AXI
    6" Width 18" Length Harig EZ-SURF, PC CNC CONTROL, CNC BY PC OR MANUAL OPS SURFA
    $RFQ
    6" Width 18" Length Harig EZ-SURF, PC CNC CONTROL, CNC BY PC OR MANUAL OPS SURFA
      6" X 18" HARIG "E-Z SURF" CNC SURFACE GRINDER   MODEL: EZ-SURF    S/N: 422-EZ     NEW: 1997   SPECIFICATIONS: MAX. GRINDING CAPACITY .....
    6" Width 18" Length Harig 618, 1995, CAST IRON BASE, SONY 1X DRO, PMC SURFACE GR
    $RFQ
    6" Width 18" Length Harig 618, 1995, CAST IRON BASE, SONY 1X DRO, PMC SURFACE GR
      6" X 18" HARIG "MADE IN USA"    HAND FEED SURFACE GRINDER,     WITH CAST IRON BASE,   AND A "SONY" 1-AXIS DRO    MOD
    6" Wheel 0.5HP Motor Baldor 500, 2017, PEDESTAL BASE, WHEELS CARBIDE GRINDER, ½ HP
    $RFQ
    6" Wheel 0.5HP Motor Baldor 500, 2017, PEDESTAL BASE, WHEELS CARBIDE GRINDER, ½ HP
      Baldor Model #500  6" Carbide  Tool Grinder   SPEC. NO: A-559-343 S/N: X1703227510 NEW: 2017     Features: 6 inch carbide tool grinder 1/2 horsepower 3600 &n
    11" Swing 18" Centers Hardinge HLVH PRECISION ENGINE LATHE, Vari-Speed,Threads,5
    $16,500
    11" Swing 18" Centers Hardinge HLVH PRECISION ENGINE LATHE, Vari-Speed,Threads,5
    HARDINGE PRECISION TOOLROOM LATHE MODEL: HLV-H, S/N: HLV-H-12602, NEW: 1987   SPECIFICATIONS: SPINDLE CONSTRUCTION ............. HARDINGE SUPER-PRECISION           &
    42" Table 1.5HP Spindle Bridgeport 2 J Vari-Speed VERTICAL MILL, Vari-Speed, Bridgepo
    $4,950
    42" Table 1.5HP Spindle Bridgeport 2 J Vari-Speed VERTICAL MILL, Vari-Speed, Bridgepo
    BRIDGEPORT VERTICAL MILLING MACHINE MODEL: 2J, S/N: 12/BR 127005, NEW: 1970   SPECIFICATIONS: TABLE SIZE ............................ 9" X 42" NUMBER OF T-SLOTS ..................... 3 LONGITUDIN
    3" Dia. Cap 15hp Motor HP Cincinnati 2 OM, S/N: 2M2H1W-428, DRESSERS, WORKREST, CENTE
    $RFQ
    3" Dia. Cap 15hp Motor HP Cincinnati 2 OM, S/N: 2M2H1W-428, DRESSERS, WORKREST, CENTE
      CINCINNATI No. 2 "OM" CENTERLESS GRINDER      (THIS MACHINE WAS MADE IN THE USA!)      S/N: 2M2H1W-428          DIAMETER CAP
    3" Dia. Cap 15hp Motor HP Cincinnati 2 0M, S/N: 2M2H5A-119, HYD. DRESSERS CENTERLESS
    $RFQ
    3" Dia. Cap 15hp Motor HP Cincinnati 2 0M, S/N: 2M2H5A-119, HYD. DRESSERS CENTERLESS
      CINCINNATI No. 2 "OM" CENTERLESS GRINDER      (THIS MACHINE WAS MADE IN THE USA!)      S/N: 2M2H5A-119         DIAMETER CAPACITY,
    Tsugami S206 CNC SWISS TYPE LATHE
    $RFQ
    Tsugami S206 CNC SWISS TYPE LATHE
    TSUGAMI S206 SWISS TYPE CNC LATHE NEW: 2012   General Specifications from Brochure: Control: Fanuc 31iTB No. of Controllable Axes: 8 (X1, Z1, Y1, X2, Y2, Z2, C1, C2) Max Bar Diameter: 20mm (3/4") Max Ma
    32" Table 1HP Spindle Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, R-8
    $2,450
    32" Table 1HP Spindle Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, R-8
    9" X 32" BRIDGEPORT VERTICAL MILLING MACHINE MODEL: J-HEAD, S/N: 12/BR 93757, NEW: 1966   SPECIFICATIONS: TABLE SIZE ........................ 9" X 32"       &nbs
    48" Table 2HP Spindle Bridgeport SERIES I VERTICAL MILL, Vari-Speed Head, R-8, B'port
    $6,500
    48" Table 2HP Spindle Bridgeport SERIES I VERTICAL MILL, Vari-Speed Head, R-8, B'port
    BRIDGEPORT VERTICAL MILLING MACHINE MODEL: SERIES I, S/N: 12/BR 230323, NEW: 1983   SPECIFICATIONS: TABLE SIZE .............................. 9" X 48" NUMBER OF T-SLOTS ....................... 3 L
    36" Width 24" Height Trinco 36/BP, WITH DUST COLLECTOR BLAST CLEANER, 36"W
    $RFQ
    36" Width 24" Height Trinco 36/BP, WITH DUST COLLECTOR BLAST CLEANER, 36"W
       Trinco Model 36/BP    Dry Blast Cabinet  with BP Dust Collector   36”W x 24”D x 23”H Tub Machine S/N: 41068-4   Cabinet Dimensions:  38&quo
    18" Swing 100" Centers Mazak ENGINE LATHE, Inch/Metric,Taper,3" Hole,34 Jaw
    $14,500
    18" Swing 100" Centers Mazak ENGINE LATHE, Inch/Metric,Taper,3" Hole,34 Jaw
    18"/25" x 100" MAZAK GAP BED LATHE S/N: 33833W, NEW: 1980'S   SPECIFICATIONS: SWING OVER BED WAYS ................. 18" SWING IN REMOVABLE GAP .............. 25-1/8" SWING OVER CROSS S
    Kuraki TAILSTOCK for KBT-1003 BORING MILL TOOLING, 49" Carrier Travel
    $8,500
    Kuraki TAILSTOCK for KBT-1003 BORING MILL TOOLING, 49" Carrier Travel
        KURAKI TAILSTOCK MODEL: KBT 1003W   CARRIER VERTTICAL TRAVEL 49"   TAILSTOCK WAS MADE TO FIT A KURAKI TABLE TYPE BORING MILL MODEL: KBT 1003W   FOR MORE INFORMATION: Call
    1500Lb Cap. ALLFAB 150-4 WELDING POSITIONER
    $4,950
    1500Lb Cap. ALLFAB 150-4 WELDING POSITIONER
      1,500 LB. ALL FAB WELDING POSITIONER MODEL 150-4   LOAD CAPACITY ................. 1,500 LBS. VERTICAL 90 DEG. @ 4" CENTER OF GRAVITY LOAD CAPACITY ................. 1,500 LBS. FLAT HORIZ. TABLE DI
    1" Dia. 12 Length LNS EXPRESS 226 BAR FEED
    $4,950
    1" Dia. 12 Length LNS EXPRESS 226 BAR FEED
    LNS EXPRESS 226 MAAGAZINE BARFEED NEW: 2000     FOR MORE INFORMATION: Call Mike at 973-497-7540
    15" Swing 0.5HP Spindle Alceco AICO-144B DRILL PRESS, 5 Speed, Drill Chuck, Single Ph
    $250
    15" Swing 0.5HP Spindle Alceco AICO-144B DRILL PRESS, 5 Speed, Drill Chuck, Single Ph
    Alceco AICO-144B FOR MORE INFORMATION: Call David at 973-497-7570
    Duro-Dyne LF PINSPOTTER ARC WELDER
    $350
    Duro-Dyne LF PINSPOTTER ARC WELDER
      DURO-DYNE HAND HELD PIN SPOTTER MODEL LF        VOLTAGE ............... 110     FOR MORE INFORMATION: Call Mike at 973-497-7540
    Duro-Dyne PBFS-14 PIN SPOTTER ARC WELDER
    $1,950
    Duro-Dyne PBFS-14 PIN SPOTTER ARC WELDER
      DURO-DYNE PIN SPOTTER WELDER MODEL PBFS14      S/N 53888   VOLTAGE ............... 220 V / Single Ph KVA ................... 15 CAPACITY ...2" PINS.... 18 GA   ON WH
    57 AMPS Current EDM CT300, CNC, 1998, MADE IN JAPAN, EDM HOLE DRILLER, HIGH-PRECISION,
    $RFQ
    57 AMPS Current EDM CT300, CNC, 1998, MADE IN JAPAN, EDM HOLE DRILLER, HIGH-PRECISION,
            CURRENT (Made in Japan) "High Accuracy" CNC EDM Hole Driller   Model: CT300       S/N: 84120      Year
    Tin Knocker 30 ROLL FORMER
    $495
    Tin Knocker 30 ROLL FORMER
      TIN KNOCKER NO. 30 CLEAT BENDER NEW 2004   BENDING LENGTH ......................... 30" CAPACITY ......(MILD STEEL)............. 20 GA. CLEAT DEPTH ............................ .500"  
    Engel PSD3 ROLL FORMER
    $2,450
    Engel PSD3 ROLL FORMER
      22 GAUGE ENGEL ROLLFORMER MODEL PSD3     S/N 481261 FOR MORE INFORMATION: Call Rick at 973-497-7560
    Sonic ED2000 ULTRASONIC WELDER
    $1,950
    Sonic ED2000 ULTRASONIC WELDER
    SONIC & MATERIALS ED2000 ULTRASONIC WELDER FOR MORE INFORMATION: Call Mike at 973-497-7540
    Branson 8700 ULTRASONIC WELDER
    $1,950
    Branson 8700 ULTRASONIC WELDER
    BRANSON 8700 ULTRASONIC WELDER FOR MORE INFORMATION: Call Mike at 973-497-7540
    Niagara 2 Hand Shear SHEET METAL SHEAR
    $750
    Niagara 2 Hand Shear SHEET METAL SHEAR
      HEAVY DUTY NIAGARA HAND SHEAR FOR MORE INFORMATION: Call Rick at 973-497-7560
    Torit SDF-6 1600 CFM Dust Collector
    $RFQ
    Torit SDF-6 1600 CFM Dust Collector
    CFM 1600 Power 208 volts No. of Cartridges 6
    2018 - 193 Ton x 14' Ermak Speed Bend CNC Press Brake
    $RFQ
    2018 - 193 Ton x 14' Ermak Speed Bend CNC Press Brake
    Capacity 193 Tons Overall Bending Length 168" Distance Between Housings 148.82 Y Rapid Speed 7.09" /sec Y Working Speed 0.49" /sec Y Return Speed 7.48" /sec X Axis Travel 31.5" X Axis Spee
    • Tonnage: 193T
      100 Ton x 10' Accurpress 710010 Hydraulic Press Brake, 2-Axis Back Gaug
      $RFQ
      100 Ton x 10' Accurpress 710010 Hydraulic Press Brake, 2-Axis Back Gaug
      100 TON x 10' ACCURPRESS 710010 HYDRAULIC PRESS BRAKE Model 710010, S/N 4206, New 1997 Stock # Q12103 EQUIPPED WITH: Accurpress CNC Gauge System Control with 2-Axis Backgauge, ETS Pendant, Foot Pedal, Light Cur
      • Tonnage: 100T
        60T Minster #6 Single Point OBI Flywheel Press, 24" x14.5" Ram, 3
        $RFQ
        60T Minster #6 Single Point OBI Flywheel Press, 24" x14.5" Ram, 3
        60 TON MINSTER SINGLE POINT OBI FLYWHEEL PRESS Model #6, S/N 101-6-22050, New 1975 Stock # Q12043 EQUIPPED WITH: Inch / Single / Continuous Modes, Dual Palm Buttons (T Stand), Air Clutch and Brake, Air Counterbalan
        • Tonnage: 60T
        • Stroke: 6"
          5' x 15" Nardini FRN 60 Radial Arm Drill, 1450 RPM, MT5, 24"
          $RFQ
          5' x 15" Nardini FRN 60 Radial Arm Drill, 1450 RPM, MT5, 24"
          5' x 15" NARDINI FRN 60 RADIAL ARM DRILL Model FRN 60-1250, New 1985 Stock # Q12025 EQUIPPED WITH: Power Arm Elevation, Power Clamping, Rapid Traverse on Head, Tapping/Threading Capabilities, Plain-Type Ba
          • Arm length: 5'
          • Column diameter: 15"
            2011 - 110 Ton Amada RGM2-1003 CNC Press Brake
            $RFQ
            2011 - 110 Ton Amada RGM2-1003 CNC Press Brake
            Capacity 110 Tons Table Length 118" Max. Bending Length 122" Distance Between housings 100.4" Throat 15.75" Stroke 3.94" Open Height 14.57" Dimensions (approx) 141" x 63" x
            • Tonnage: 110T
              HITACHI SEIKI VT-500 SUPERTILT 5-AXIS VMC
              $7,950
              HITACHI SEIKI VT-500 SUPERTILT 5-AXIS VMC
              SEICO 16M, 12,000 RPM, 20 ATC, 20 HP, (NEEDS NEW SPINDLE MOTOR)
              • X axis: 20"
              • Y axis: 16"
                ANCA FAST GRIND CNC TOOL & CUTTER GRINDER
                $69,500
                ANCA FAST GRIND CNC TOOL & CUTTER GRINDER
                5-AXIS, 8' GRINDING WHEEL, 10 HP, INCLUDER MIST BUSTER, (NEED PAREMETERS REINSTALLED)
                MIYANO ANC-45S CNC 5-Axis CNC Turning Center
                $RFQ
                MIYANO ANC-45S CNC 5-Axis CNC Turning Center
                MIYANO ANC-45S CNC 5-Axis CNC Turning Center Age 1992 Max. Swing ..................................... 23.62 Max. Work Length .......................... 15 MAIN SPINDLE: Bar Capacity ..........................
                2011 Sodick AD25L Sinker EDM
                $RFQ
                2011 Sodick AD25L Sinker EDM
                2011 Sodick AD25L Sinker EDM SPECIFICATIONS: TABLE SIZE-W 11.81" TABLE SIZE-L 17.72" X 11.81" Y 7.87" Z 5.91" The highly compact AD25L provides improved machining accuracy and spe
                2001 Cat AP-650B Crawler Mounted Asphalt Paver RTR#4121057-02
                $8,000
                2001 Cat AP-650B Crawler Mounted Asphalt Paver RTR#4121057-02
                Equipment located in Billings, MT. 2001 Cat AP-650B Crawler Mounted Asphalt Paver, 3054TA Cat Diesel Engine, Hyd Transmission, 112 HP, Hour Meter Reads: 3,919 (Unverified), S/N: CATAP650H9DN00458 All equipment is sold
                Grieve 36" x 32"H x 36" powered exhaust, 350F model 333
                $RFQ
                Grieve 36" x 32"H x 36" powered exhaust, 350F model 333
                Grieve model 333 cabinet oven with double door opening, stainless steel interior, heavy duty leg stand, 36"W x 32"H x 36"L work area, 350F, 230V single phase (35A), Watlow #96 solid state temperature contr
                • Chamber width: 36"
                • Chamber length: 36"
                  DMG Gildemeister CTX Beta 1250 CNC Lathe, Siemens 840D, 12" 3-Jaw Chuc
                  $RFQ
                  DMG Gildemeister CTX Beta 1250 CNC Lathe, Siemens 840D, 12" 3-Jaw Chuc
                  DMG GILDEMEISTER CNC TURNING CENTER Model CTX Beta 1250, S/N 0041000654C, New 2010 Stock # Q12018 EQUIPPED WITH: DMG MORI ERGOline® Control with Siemens Sinumerik 840DI, 12" 3-Jaw Chuck, 12" Position
                  • Swing: 27.6"
                  • Centers: 56.1"
                    Marvel 15A Horizontal Band Saw, Auto.Stock Infeed (2) Vises, 15" x 20&
                    $RFQ
                    Marvel 15A Horizontal Band Saw, Auto.Stock Infeed (2) Vises, 15" x 20&
                    MARVEL 15A HORIZONTAL BAND SAW Model 15A5/M8, S/N E-151504, New 1981 Stock # Q11957 EQUIPPED WITH: Automatic Stock Infeed w/Programmable Lengths, 10' Automatic Conveyor Feed, 40" 'Heavy Duty' Disch
                    • Width capacity: 20"
                    • Height capacity: 15"
                      GMC GMM-1050EVS 10x50 in. Manual Vertical Mill w/Inverter Drive
                      $RFQ
                      GMC GMM-1050EVS 10x50 in. Manual Vertical Mill w/Inverter Drive
                      CALL 386-304-3720 FOR AVAILABILITY FEATURES: Made in Taiwan “Meehanite” casting Turcite “B” coating on X/Y ways like CNC mills ISO 9001 certified Inverter drive variable spindle speeds from 60-4,000 rpm Heavy du
                      • Table width: 10"
                      • Table length: 50"
                        Makino DUO 43 Electrical Discharge Machine
                        $RFQ
                        Makino DUO 43 Electrical Discharge Machine
                        Makino DUO 43 Electrical Discharge Machine Year of Mfg: 2011 CNC Control: Makino MGW-S6 Table Size: 27.9" x 22" Maximum Load on Table: 1,764 lbs Travels: X Axis: 17.7" Y Axis: 11.8" Z Axis
                        • X axis travel: 17.7"
                        • Y axis travel: 11.8"
                          1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING SYSTEM Sto
                          $RFQ
                          1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING SYSTEM Sto
                          Tonnage 1250 metric-tons Billet 145 milli
                          15 TON OCN MDL 3/15.80 SX BAR TO BAR DRAWING LINE (14497)
                          $RFQ
                          15 TON OCN MDL 3/15.80 SX BAR TO BAR DRAWING LINE (14497)
                          15 TON OCN MDL. 3/15.80 SX BAR TO BAR DRAWING LINE - NEW 2009Stock # 14497MANUFACTURER – OCN (ITALY)YEAR – 2009CURRENT MATERIAL – BRASS BARBAR TYPES – ROUND, SQUARE, HEXAGONALMAXIM
                          RUESCH TUB TYPE WET WIRE DRAWING MACHINE (14469)
                          $RFQ
                          RUESCH TUB TYPE WET WIRE DRAWING MACHINE (14469)
                          MANUFACTURER: H.J. RUESCH & CO.TYPE: TUB TYPE FINE WIRE DRAWING MACHINENO. OF DIES: 11TWIN HORIZONTAL BLOCKSBLOCK SIZE:-5" (127 MM) DIAMETER-9" (228 MM) WIDETUB TYPE WIRE DRAWER WITH SPRAY LUBRICATIONPAYOFF:-TYPE
                          6,000 LB. RAPID AIR NON-MOTORIZED UNCOILER MODEL R6000.12N , STOCK # 14456
                          $RFQ
                          6,000 LB. RAPID AIR NON-MOTORIZED UNCOILER MODEL R6000.12N , STOCK # 14456
                          Max Weight of Coil 6000 pounds Max Width of Coil
                          9" VERTICAL WIRE DRAWING BLOCK (14426)
                          $RFQ
                          9" VERTICAL WIRE DRAWING BLOCK (14426)
                          TYPE: SINGLE DIE WIRE DRAWING BLOCKAXIS: VERTICALBLOCK DIAMETER: 9"BLOCK FACE WIDTH: 4"NO. OF DIES: 1PURCHASER MUST PROVIDE DIE HOLDERDRIVE MOTOR:-MANUFACTURER: DAYTON DC GEARMOTOR-MODEL" 62418A-RATIO 11.8 TO 1-1/2 HP, 1
                          FENN Hydraulic Swager Feed Table 14355
                          $RFQ
                          FENN Hydraulic Swager Feed Table 14355
                          FENN HYDRAULIC SWAGER FEED TABLEStock # 14355Serial #..........5871-01Feed Unit:........93" x 35" x 55"           &nb
                          3" RUESCH 11 ROLL LEVELER (14322)
                          $RFQ
                          3" RUESCH 11 ROLL LEVELER (14322)
                          Max Width of Workpiece 3 inches RUESCH 11 ROLL LEVELERStock # 14322SPECIFICATIONS&n
                          16" ROBINSON RENCO WIRE DRAWING DEADBLOCK [14043]
                          $RFQ
                          16" ROBINSON RENCO WIRE DRAWING DEADBLOCK [14043]
                          (Used) 16" Diameter Robinson Renco Wire Drawing Deadblcok Machine # 14043 Type Machine: Wire Drawing Deadblock Model: 16DB30VF Serial Number: 3563 Finish Blo
                          2000 - 22 Ton Amada Vipros 255 CNC Turret Punch
                          $RFQ
                          2000 - 22 Ton Amada Vipros 255 CNC Turret Punch
                          Capacity 22 Tons Max Sheet Size (w/repo) 50 x50" Max Hole Diameter 3.5" Max Punch Capacity 1/4" Ram Stroke 1.575" Adjustable Turret Style Thick Turret Stations 31 Stations w/ (3) A/I Weight 21,
                          • Tonnage: 22T
                            South Bend Lathe SB1049 13" x 30"
                            $16,000
                            South Bend Lathe SB1049 13" x 30"
                            Like new condition, gently used in a private shop for personal use. OBO
                            Devlieg Cast Iron Angle Plates - 30"H x 16-1/2"W x16"D
                            $RFQ
                            Devlieg Cast Iron Angle Plates - 30"H x 16-1/2"W x16"D
                            DEVLIEG 4-PIECE CAST IRON MATCHED ANGLE BLOCK SET S/N: A-91350 & B-91350 SPECIFICATIONS: TOTAL HEIGHT ........................ 30" TOTAL WIDTH ......................... 16-1/2" TOTAL DEPTH ........
                            • Width: 16.5"
                            • Length: 16"
                              Cincinnati 1406-R 3/16 x 6' Mechanical Shear, Squaring Arm, Front Supt
                              $RFQ
                              Cincinnati 1406-R 3/16 x 6' Mechanical Shear, Squaring Arm, Front Supt
                              6' x 3/16" Cincinnati Mechanical Shear Model 1406-R S/N 39215 New 1974 Thickness .............................. 3/16" (.187") Cutting Length ......................... 6'2" Gap
                              • Maximum thickness: 0.187"
                              • Cutting length: 74"
                                16" X 30" TRAK MODEL: 1630HS-SX CNC/MANUAL FLAT BED LATHE - NEW:
                                $RFQ
                                16" X 30" TRAK MODEL: 1630HS-SX CNC/MANUAL FLAT BED LATHE - NEW:
                                16" X 30" TRAK 2-AXIS CNC/MANUAL FLAT BED LATHE MODEL: 1630HS-SX, S/N: 09DG62508, NEW: 2009 SPECIFICATIONS: HEIGHT OF CENTERS .......................... 8" SWING OVER BED ...........................
                                • Swing: 16"
                                • Centers: 30"
                                  Motor 25/3 230/260V Baldor
                                  $1,500
                                  Motor 25/3 230/260V Baldor
                                  Motor 25/3 230/260V Baldor Model: M4107T [Baldor] S/N: 10E0.1-56 10/82 3,525rpm Motor; Frame 284TS; Shaft1-5/8 25Hp; 3Ph; 230/460Volt; 62/31Amp
                                  Drill Kit Cordless 7.2v Mkta
                                  $99
                                  Drill Kit Cordless 7.2v Mkta
                                  Drill Kit Cordless 7.2v Mkta Model: 6010D [Makita] S/N: 4824085E Cordless Drill w/Case; 2 New Batteries; Charger 7.2Volt; 3.5AHr
                                  TOYODA WELE AA956 CNC VERTICAL MACHINING CENTER - NEW: 2012
                                  $RFQ
                                  TOYODA WELE AA956 CNC VERTICAL MACHINING CENTER - NEW: 2012
                                  TOYODA-WELE VERTICAL MACHINING CENTER MODEL: AA965, S/N: 11083, NEW: 2012 SPECIFICATIONS: TABLE SIZE ....................... 43.3" x 25.6" X AXIS TRAVEL .................... 35.4" 900mm Y AXIS TRA
                                  • X axis: 35.4"
                                  • Y axis: 25.6"
                                    LEBLOND MODEL 1610 ENGINE LATHE
                                    $7,950
                                    LEBLOND MODEL 1610 ENGINE LATHE
                                    TWO 12" CHUCKS, TAPER ATTACHMENTS, 1800 RPM
                                    • Swing: 18"
                                    • Centers: 60"
                                      LEBLOND MODEL 1610 ENGINE LATHE
                                      $7,950
                                      LEBLOND MODEL 1610 ENGINE LATHE
                                      TWO 12" CHUCKS, TAPER ATTACHMENTS, 1800 RPM
                                      • Swing: 18"
                                      • Centers: 60"
                                        Categories:
                                        Condition:
                                        Manufacturer:
                                        Location:
                                        Price:
                                        •  to 
                                        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>