buy & sell, new & used machinery, machine tools & equipment

<Prev | 371 | 372 | 373 | 374 | 375 | 376 | 377 | 378 | 379 | 380 | Next>
Refine: Viewing 18901 - 18950 of 19764 matches
Sort by:
Items Per Page:  20 |  50  |  100
TN-300 Hole Saw Tube Notcher: $2495.
$RFQ
TN-300 Hole Saw Tube Notcher: $2495.
This Electric Notching Machine has a vise with quick release so that different notch angles can be quickly set up and locked in with a solid taper lock. Notch up to 60 degrees, or, with extended hole saws and the right s
  • Maximum thickness: 3"
    TN-250 Hole Saw Tubing Notcher
    $RFQ
    TN-250 Hole Saw Tubing Notcher
    Powered by your portable drill with 1/2" chuck. This very special pipe notcher machine has a self centering capture vise that can clamp onto bent tubes in any direction. The only hole saw style tube notcher that is
    • Maximum thickness: 2.5"
      Model TN-200E Hole Saw Tube Notcher: $2995
      $RFQ
      Model TN-200E Hole Saw Tube Notcher: $2995
      This electric notching machine includes tooling for 1/4” up to 2” schedule 40 size pipes. This is a very powerful and quick pipe coping machine that can produce 90 degree notches in the end of pipe in seconds using very
      • Maximum thickness: 2"
        45 Ton Hydraulic Horizontal Press
        $RFQ
        45 Ton Hydraulic Horizontal Press
        Stroke in and stroke back is controlled with two hand wheel adjustments and also in a digital version that allows for programming several hundred complex functions. Table is made with tempered and ground steel, the carri
        45 Ton Hydraulic Horizontal Press
        $RFQ
        45 Ton Hydraulic Horizontal Press
        Stroke in and stroke back is controlled with two hand wheel adjustments and also in a digital version that allows for programming several hundred complex functions. Table is made with tempered and ground steel, the carri
        RDB- 500 Hydraulic Rotary Draw Bender
        $RFQ
        RDB- 500 Hydraulic Rotary Draw Bender
        Mild Steel schedule 40 Pipe: 3" Aluminum schedule 40 Pipe: 3.5" Stainless Steel schedule 40 Pipe: 2.5" Mild Steel Round Tube: 3" x .250 wall Aluminum Round Tube: 3.5" x .187 wall Stainless St
        RDB-350-TS Electric Programmable Bender
        $RFQ
        RDB-350-TS Electric Programmable Bender
        This tubing bender has a maximum CLR is 24" which is our largest for these machines, Touch Screen Programming with memory for 175 programs. Mild Steel schedule 40 Pipe: 2.5" Aluminum schedule 40 Pipe: 3"
        RDB-250 Electric Programmable Bending Machine
        $RFQ
        RDB-250 Electric Programmable Bending Machine
        Mild Steel schedule 40 Pipe: 2.5" Aluminum schedule 40 Pipe: 3" Stainless Steel schedule 40 Pipe: 2" Mild Steel Round Tube: 3" x.187 wall Aluminum Round Tube: 3.5" x.250 wall Stainless Steel
        RDB-150 Hydraulic Rotary Draw Bender
        $RFQ
        RDB-150 Hydraulic Rotary Draw Bender
        Capacities: Mild Steel or Aluminum schedule 40 Pipe: 2" Stainless Steel schedule 40 Pipe: 1.5" Mild Steel Round Tube: 2.5" x .125 wall Aluminum Round Tube: 2.5" x .156 wall Stainless Steel Round
        RDB-125 Hydraulic Rotary Draw Bender
        $RFQ
        RDB-125 Hydraulic Rotary Draw Bender
        Our lowest price powered pipe and tube bending machine. Capacities: Mild Steel or Aluminum schedule 40 Pipe: 2" Stainless Steel schedule 40 Pipe: 1.5" Mild Steel Round Tube: 2.5" x .125 wall Aluminum
        RDB-100 Manual Ratcheting Tube and Pipe Bender
        $RFQ
        RDB-100 Manual Ratcheting Tube and Pipe Bender
        Capacity is up to 1" schedule 40 Pipe, 1" square tubing, 1-1/2" Chromolly (up to .083 wall), up to 1-3/4" tube (.095 wall mild steel). Unique ratcheting mechanism allows you to bend easily by simply
        EDWARDS 10 Ton Pipe/Tube Bender
        $RFQ
        EDWARDS 10 Ton Pipe/Tube Bender
        * Operates Horizontal or Vertically * 180 Degree Bend Capacity * Easy To Use Hand Controls * Auto Stop Feature For Repeatable Bends * Heavy Duty Rolling and Locking Stand * Quick Disconnect Hoses * Heavy Duly All S
        BAILEIGH RH150 PYRAMID ROLL BENDING MACHINE
        $RFQ
        BAILEIGH RH150 PYRAMID ROLL BENDING MACHINE
        • All 3 Rolls are Power driven • Steel Frame Construction • Standard Combo Rolls for flat shapes included • Alloy steel Rolls and Shafts hardened & ground • Horizontal or Vertical Working Positions • Brake Motor
        BAILEIGH RH120 PYRAMID ROLL BENDING MACHINE
        $RFQ
        BAILEIGH RH120 PYRAMID ROLL BENDING MACHINE
        • All 3 Rolls are Power driven • Steel Frame Construction • Standard Combo Rolls for flat shapes included • Alloy steel Rolls & Shafts • Alloy steel Rolls and Shafts hardened & ground • Horizontal or Vertica
        BAILEIGH RH85 PYRAMID ROLL BENDING MACHINE
        $RFQ
        BAILEIGH RH85 PYRAMID ROLL BENDING MACHINE
        • All 3 Rolls are Powered • Steel Frame Construction • Standard Combo Rolls for flat shapes included • Alloy steel Rolls & Shafts • Rolls are Hardened and Ground • Horizontal or Vertical Working Positions • Bra
        BAILEIGH Roll Benders
        $RFQ
        BAILEIGH Roll Benders
        • All 3 rolls are powered by forward/reverse foot pedals • Push button up-down positioning of top roll with Digital ReadOut • Steel-Welded Construction • Hardened alloy steel shafts • Top Roll Moved Hydraulically via
        BAILEIGH Roll Bender Machines
        $RFQ
        BAILEIGH Roll Bender Machines
        • Ratcheting top roll adjustment • Cast frame . • Shafts are hardened steel • Rolls are hardened and ground steel. • Hardened Rolls for standard flat profiles included. • Rolls for round shapes are optional. • Made
        GMC Roll Bender Machines
        $RFQ
        GMC Roll Bender Machines
        Model: PRB-30HV: $3850. Diameter of rollers: 1.12" Rolling speed: 9 rpm Motor: 2 HP, 110 Volts Dimensions: 47 x 30 x 48" Weight: 620 Lbs Model: PRB-55: $5850. Diameter of rollers: 2" Roller spee
        3 in 1 Combination Machines Shear - Press Brake - Slip Rolls
        $RFQ
        3 in 1 Combination Machines Shear - Press Brake - Slip Rolls
        52 inch $1295. 40 inch $995. 30 inch $695. Shear has squaring bar, adjustable hold-downs and back gauge. Capacity: .030" (22 gauge). [shear is not meant for constant use] Press Brake with segmented upper press br
        BIRMINGHAM 3-ROLL DOUBLE-PINCH HYDRAULIC PLATE BENDING ROLL MACHINE
        $RFQ
        BIRMINGHAM 3-ROLL DOUBLE-PINCH HYDRAULIC PLATE BENDING ROLL MACHINE
        Machine Capacity Dia. of Rolls RH-0506 61" x 1/4 8" RH-0606 80" x 1/4 8" RH-0805 100" x 6 gauge 8" RH-1004 120" x 7 gauge 8" RH-0508 61&q
        CHICAGO DREIS & KRUMP 3-ROLL SINGLE PINCH HYDRAULIC PLATE BENDING ROLLS
        $RFQ
        CHICAGO DREIS & KRUMP 3-ROLL SINGLE PINCH HYDRAULIC PLATE BENDING ROLLS
        • Hydraulic powered bending roll adjustment. • Push button GO-TO Positioning of bending roll with Digital Readout for easy repeat parts. • Push button Hydraulic powered pinch roll adjustment. • Push button Hydraulic p
        BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
        $RFQ
        BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
        All 3 rolls driven hydraulically. Crowned alloy steel rolls. Foot control (not shown) with forward and reverse. Bending roll is hydraulically powered up and down with digital readout showing position. Bending roll cylind
        BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
        $RFQ
        BIRMINGHAM 3-ROLL SINGLE-PINCH HYDRAULIC PLATE BENDING ROLLS
        All 3 rolls driven hydraulically. Crowned alloy steel rolls. Foot control (not shown) with forward and reverse. Bending roll is hydraulically powered up and down with digital readout showing position. Bending roll cylind
        GMC SINGLE PINCH BENDING ROLLS
        $RFQ
        GMC SINGLE PINCH BENDING ROLLS
        • 3/8", 1/2" and 5/8" grooves at one end of rolls allow rolling of wire, round rod or beaded sheet metal • Double foot pedals for forward and reverse • Machine stops when foot pedal is released • Adjust
        Electric Powered Slip Rolls Machine
        $RFQ
        Electric Powered Slip Rolls Machine
        • Rolls are turned, ground, and polished high grade carbon steel. • Gear driven top roll. • Front mounted handle to lift upper roll for to remove your parts • 3 wire grooves for rolling 5/16", 3/8", 1/2"
        Chicago Dreis & Krump Hand Operated Slip Rolls
        $RFQ
        Chicago Dreis & Krump Hand Operated Slip Rolls
        Its hard to make portable slip roll machinery that can out perform Chicago Dreis & Krump. 3 sizes to choose from. We also offer a little 12 inch long machine with 1 inch diameter rolls from another company for $345.
        DAKE Pneumatic BENCH PRESSES - made in USA
        $RFQ
        DAKE Pneumatic BENCH PRESSES - made in USA
        • Non-rotating double acting ram eliminates the need for guide pins on most tooling • Chrome-plated piston rod resists rust and ensures long life • Threaded rod end permits nose piece and tooling to be easily attached
        DAKE Compound Leverage ARBOR PRESSES - made in USA
        $RFQ
        DAKE Compound Leverage ARBOR PRESSES - made in USA
        • Compound Leverage Mechanism means less effort for you. • Sliding Pin changes press from compound to single leverage. • Ratchet allows lever to be used in most convenient position. • Handwheel advances ram to work qu
        DAKE Ratcheting ARBOR PRESSES - made in USA
        $RFQ
        DAKE Ratcheting ARBOR PRESSES - made in USA
        • Ratchet allows lever to be used in most convenient position. • Handwheel advances ram to work quickly. • Counterweight returns lever quickly after downstroke. • Pedestals available on 1-1/2, 1-1/2B, and 3A models.
        DAKE ARBOR PRESSES - made in USA
        $RFQ
        DAKE ARBOR PRESSES - made in USA
        DAKE ARBOR PRESSES - made in USA
        Turn your hydraulic shop press into an iron working machine
        $RFQ
        Turn your hydraulic shop press into an iron working machine
        Pipe Notcher Notches pipe with a semi-circular cut to allow one pipe to fit 90° against another for railings. Then just a small amount of welding makes for a beautiful connection. Sizes from 1/2 to 2" schedule
        Turn your hydraulic press into a Brake Press
        $RFQ
        Turn your hydraulic press into a Brake Press
        Optional Press Brake Tooling as seen in photo is 32 inch long, can bend 3/16 x 32", 1/4 x 24", 3/8 x 6" wide 12 inches long $1295. extra 18 inches long $1495. extra 24 inches long $1895. extra 32 inc
        Laboratory Compression Heat Press
        $RFQ
        Laboratory Compression Heat Press
        Laboratory Compression Heat Press with independently heated electric platens, precise temperature control, rapid advance hydraulics and accurate pressure adjustment. Designed to hold pressure for long periods. Use this
        DAKE C-FRAME HYDRAULIC PRESS
        $RFQ
        DAKE C-FRAME HYDRAULIC PRESS
        Standard Equipment: • Adjustable Return Stroke • Remote Pressure Adjustment • Light Sensitive Thumb Pads • Run-Jog Selector • Oversized Heavy duty Hydraulic Cylinders • Bolster Plate included • Choose 208, 230, 46
        HMI HYDRAULIC SEP C-FRAME PRESS
        $RFQ
        HMI HYDRAULIC SEP C-FRAME PRESS
        CAPACITY 35 ton 40 ton 60 ton 80 ton 100 ton 120/150 ton PRESS PLATEN L-R, F-B 20" x 10.5" 36" x 14" 36" x 14" 36" x 14" 36" x 14" 36&quo
        H.M.I. PJP C-Frame Hydraulic Press - made in USA
        $RFQ
        H.M.I. PJP C-Frame Hydraulic Press - made in USA
        Choose from 42 Ton and 58 Ton sizes 11" stroke 14" throat 18" throat height 38" x 16" press platen Motor: 10 HP FEATURES: • Large open throat area • Extra large press bed to accommodat
        • Stroke: 11"
          JET HYDRAULIC SHOP PRESS HP-35A
          $RFQ
          JET HYDRAULIC SHOP PRESS HP-35A
          • Capacity: 35 Tons • Easy-to-use, hand-operated hydraulic pump • Pressure gauge for direct pressure readings • Tables raise and lower easily with use of hand crank • Side frames are open for inserting long material
          • Tonnage: 35T
          • Stroke: 4"
            JET HYDRAULIC SHOP PRESS HP-15A
            $RFQ
            JET HYDRAULIC SHOP PRESS HP-15A
            • Capacity: 15 Tons • Easy-to-use, hand-operated hydraulic pump • Pressure gauge for direct pressure readings • Tables raise and lower easily with use of hand crank • Side frames are open for inserting long material
            • Tonnage: 15T
            • Stroke: 4.5"
              EDWARDS 40 Ton HYDRAULIC PRESS
              $RFQ
              EDWARDS 40 Ton HYDRAULIC PRESS
              • Optional Press Brake Tooling is 32 inch long, as seen in photo can bend 3/16 x 32", 1/4 x 24", 3/8 x 6" • Heavy duty all steel construction • Rolling cylinder for maximum versatility. • Easy to use ha
              • Tonnage: 40T
              • Stroke: 12.25"
                HYDRAULIC MOVABLE TABLE PRESS
                $RFQ
                HYDRAULIC MOVABLE TABLE PRESS
                • Moveable Table allows overhead loading of heavy workpieces. • Adjustable Workhead Height provides maximum daylight space for oversized work. • Heavy-Duty Hoist easily raises and lowers workhead. • Toggle Clamps lock
                DAKE HYDRAULIC DURA-PRESS
                $RFQ
                DAKE HYDRAULIC DURA-PRESS
                • Double acting cylinder design with 5 part oil seals for smooth operation and a tight seal. • Ram has lifting eyes to move table with chains. • 2 Hp submerged motor drives 2 centrifugal pumps on 40 & 70 Ton • 3 H
                DAKE 50 Ton HYDRAULIC DURA-PRESS
                $RFQ
                DAKE 50 Ton HYDRAULIC DURA-PRESS
                • Regular Price: Only $6195. Made in USA. • Motor is 2 hp, 110 volts to plug in anywhere • Lever control ram advance for easy use. • Double acting cylinder for easy positioning of the ram. • Sturdy, welded channel
                • Tonnage: 50T
                  DAKE HYDRAULIC DURA-PRESS
                  $RFQ
                  DAKE HYDRAULIC DURA-PRESS
                  • Simple single acting cylinder design with 5 part oil seals for smooth operation and a tight seal. • Welded heavy steel plate frame for greater rigidity. • Efficient hand pump, conveniently located reduces operator fa
                  DAKE H-FRAME HYDRAULIC PRESS
                  $RFQ
                  DAKE H-FRAME HYDRAULIC PRESS
                  Standard Features: • Hand Pump or Air or Electric • Rapid Ram Return • By-pass Hole • Adjustable Table with self locking hoist • Rapid Screw Traverse of Ram • Movable Workload (except 25 ton) • 2 Forged Steel V-Bl
                  BIRMINGHAM Radial Arm Drill Press
                  $RFQ
                  BIRMINGHAM Radial Arm Drill Press
                  TPR-720 TPR-820 TPR-920 TPR-1100 TPR-1230 Column Diameter 8.25" [210mm] 8.25" [210mm] 8.25" [210mm] 10.25" [260mm] 11.81" [300mm] Column to spindle-max
                  JET Radial Arm Drill Press
                  $RFQ
                  JET Radial Arm Drill Press
                  The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads The spindle is made of the finest case hardene
                  Rong Fu RF-45 Geared Head Drill-Mill
                  $RFQ
                  Rong Fu RF-45 Geared Head Drill-Mill
                  • Extra heavy duty square column design • Head tilts 90° left and 45° right • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8
                  Rong Fu RF-40 Geared Head Drill-Mill
                  $RFQ
                  Rong Fu RF-40 Geared Head Drill-Mill
                  • Head tilts 90° left and 45° right and swivels • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1
                  Rong Fu RF-35 Radial Drill
                  $RFQ
                  Rong Fu RF-35 Radial Drill
                  • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 340, 660, 1060, 1665, 3000 rpm • Spindle Taper : MT3 • Spindle travel: 5" • Spindle horizontal travel: 14.87" • Spinde to t
                  Rong Fu RF-31 Mill-Drill
                  $RFQ
                  Rong Fu RF-31 Mill-Drill
                  • Motor: 2HP, 1 phase 110 volt or 220 volt or 3 phase 220 volt • Spindle Speeds: (12) 120 to 2500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 5-1/2" • Working Table: 8.25&q
                  Categories:
                  Condition:
                  Manufacturer:
                  Location:
                  Price:
                  •  to 
                  <Prev | 371 | 372 | 373 | 374 | 375 | 376 | 377 | 378 | 379 | 380 | Next>