• Ratcheting top roll adjustment
• Cast frame .
• Shafts are hardened steel
• Rolls are hardened and ground steel.
• Hardened Rolls for standard flat profiles included.
• Rolls for round shapes are optional.
• Made in Europe (not Turkey).
• Bottom 2 rolls are powered by electric motor controlled by forward & reverse foot pedals.
Excellent for large radius bending.

Pyramid Rolls
RM40
(just the top half of this machine tilts for horizontal use)



Shaft Diameter 1.25"
Upper Roll Diameter 5.83"
Lower Roll Diameters 4.64"
Shaft Speed variable 10 to 21 rpm
CAPABILITIES Made in Europe
Flat Bar Hard Way 2.0" x 3/8" @ 8" Radius Min.
Flat Bar Easy Way 2" x 3/8" @ 10" Radius Min
Solid Round 1.75" @ 10" Radius Min.
Solid Square 1.25" @ 10" Radius Min.
Angle Iron Leg In 1.5" x 1.5"x 3/16" @ 10" Radius Min./ 1 x 1 x 3/16
Angle Iron Leg Out 1.5" x 1.5" x 3/16" @ 10" Radius Min.
Tubing Round 2" x 14 ga. @ 20" Radius Min.
Tubing Square 1.5" x 1.5" x 14 ga @ 20" Radius Min
Schedule 40 Pipe 1" @ 14" Radius Min
Channel 2"
Electrics 220 volts, 1 phase

RM55
(push button hydraulic adjustment with digital readout is optional)
Description: Foot pedal turns 2 lower rolls forward and reverse. Manual vertical adjustment of top roll. Use horizontal or vertical. Foot pedal turns 2 lower rolls forward and reverse. Manual vertical adjustment of top roll. Use horizontal or vertical. Also available with push button hydraulic top roll position.

Description: Foot pedal turns 2 lower rolls forward and reverse. Manual vertical adjustment of top roll. Use horizontal or vertical. Foot pedal turns 2 lower rolls forward and reverse. Manual vertical adjustment of top roll. Use horizontal or vertical. Also available with push button hydraulic top roll position.

Shaft Diameter 1.968"
Upper Roll Diameter 5.83"
Lower Roll Diameters 5.83"
Shaft Speed variable speed 13 to 27 rpm
CAPABILITIES Made in Europe
Flat Bar Hard Way 2-1/4" x 3/8" @ 16" Radius Min
2" x 1/2" @ 16" Radius Min.
Flat Bar Easy Way 4" x 1/2" @ 15" Radius Min.
Solid Round 1.25" @ 24" Radius Min.
Solid Square 1.25" @ 24" Radius Min.
Angle Iron Leg In 2" x 2" x 1/4" @ 24" Radius Min.
Angle Iron Leg Out 2" x 2" x 1/4" @ 24" Radius Min.
Tubing Round 2.25" x .078" @ 24" Radius Min
Tubing Square 1.75" x 1.75" x .078" @ 24" Radius Min.
Schedule 40 Pipe 1-1/2" @ 20" Radius Min.
Channel 2"
Electrics 220 volts, 1 phase

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois