buy & sell, new & used machinery, machine tools & equipment

<Prev | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | Next>
Refine: Viewing 11701 - 11800 of 19776 matches
Sort by:
Items Per Page:  20 |  50 |  100
1999 Superior, 6-5-5000, 1000 HP, 150 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1999 Superior, 6-5-5000, 1000 HP, 150 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1972 Cleaver-Brooks, CB-200-250, 250 HP, 30 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1972 Cleaver-Brooks, CB-200-250, 150 HP, 30 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1/2" AOT 2 Die 2 Blow Cold Header
No description providedMaximum Cutoff Diameter12mm (1/2") Maximum Cutoff Length120mm PKO Stroke24mm Maximum Production160 PPM Approx. Floor Size14'L x 6-1/2'W Approx. Weight35,000 lbs Heading Tonnage120 Ton (Metric) 132
MATTISON 36X8FT
COMING SOON
MATTISON 24X8FT
COMING SOON
KALAMAZOO 1220D
KALAMAZOO 1220D
Ingersoll Rand 2545
T-30 Ingersoll Rand 2545 series is a heavy duty air compressor mounted on a large ASME horizontal air tank complete with drain valve and safety valve factory mounted. The cast iron pump is rated for 35 CFM and a factory
Curtis Teledo Air compressor
6 1/4 & 3 3/8 BORE TWO STAGE COMPRESSOR MINIMUM SPEED - 400 RPM
MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
  • X axis: 28.7"
  • X axis: 28.7"
  • Y axis: 28.7"
    BROTHER TC-32B QT, 5-AXIS CNC TAPPING CENTER
    X-AXIS TRAVEL........................... 21.7" Y-AXIS TRAVEL........................... 15.7" Z-AXIS TRAVEL........................... 16.3" DISTANCE BETWEEN TABLE TOP AND SPINDLE END NOSE.. 25.4" PALLET WORK AREA SI
    700 TON USI CLEARING HYDRAULIC PRESS Model HO-700-96-60
    Housing type Single action with 150 ton bed cushion Distance between positive slide stops: 97" L-R Area of bed (nominal): 97" L-R x 60" F-B Bed bolster: 96" L-R x 60" F-B x 10"
    • Tonnage: 700T
    • Tonnage: 700T
    • Stroke: 700"
      TOYODA MODEL FA630 CNC HORIZONTAL MACHINING CENTER
      Catalogue Specifications Pallet Size: 24.8" x 24.8" Indexing: 1 Degree Number of Pallets: 2 X-Axis Travel: 39.37" Y-Axis Travel: 33.46" Z-Axis Travel: 29.52" Spindle Speed: 6,000 RPM
      • X axis: 39.37"
      • X axis: 39.37"
      • X axis: 39.37"
        C.R. ONSRUD 122C18 SUPER DUTY CNC ROUTER
        “Super Duty Series” CNC Router 5 x 10 (Twin 5 x 5 foot tables), OSAI PC Front Series 10/510i controller; Automatic Lubrication; 12 position tool changer, Aggregate 13th position tool holder, Nine Spindle Drill
        SNK HPS 120B/5 Profiler CNC Horizontal Machining Center
        Spindle: • Spindle Speed: 15,000 RPM • Spindle Taper: 50 Taper • Spindle Motor: 50 HP Spindle Head Tilt: • A-Axis: 45 Degrees • C-Axis: 270 Degrees Feedrate: • X,Y,Z axes: 1 to 393 IPM • A,C axes: 0 to 1800 DPM
        • X axis: 124"
        • X axis: 124"
        • X axis: 124"
          MAZAK CNC MULTIPLEX 6200Y WITH GANTRY LOADER
          SPECIFICATIONS Max Swing Diameter..................................12.50 In Standard Cutting Diameter.........................10.24 In Max Cutting Diameter for Bar Work............2 In Distance Between Spindles at Ho
          EmcoTurn 420 Multi Axis CNC Turning Center
          Specification Description # Axis: 4 Bar Capacity: 1.02 " Power: 12 hp Turning Dia: 6.1 " Swing: 13.38 " Control: Siemens 840D Dimensions: 86.7" x 59" x 86.7" Weight: 5,720 Lbs Equipped With: Full
          • Swing: 13.38"
          • Swing: 13.38"
          • Centers: 13.38"
            CR Onsrud 5' x 12' 3 Axis CNC Router (2006)
            Description: 5' x 12' vacuum table 16 HP spindle 3 Vacuum zones 12-position tool changer (3) Becker vacuum pumps on a stand Extra Collets and Chucks Voltage: 440V, 60Hz, 3Ph
            MORI SEIKI, NH5000DCG/40
            SPECIFICATIONS: PALLET SIZE: 19.7" X 19.7" MACHINE WEIGHT: 28,380 LBS. TRAVELS: --X: 28.70" --Y: 28.70" --Z: 33.50" DISTANCE FROM SPINDLE CENTER TO TOP OF PALLET: 3.90" - 32.70" DISTANCE FROM SPINDLE NOSE
            • X axis: 28.7"
            • X axis: 28.7"
            • X axis: 28.7"
              12" Delta Radial Arm Saw
              See photos for details. Saw is located in Newtown, CT
              13 stand Bar mill, SCR drives, H/V stands, cooling bed, complete
              Billet/bloom reversing breakdown mill, with 12 horizontal / vertical rolling mill stands, shears, cooling bed, complete with all SCR type controls, spare rolls, spare parts, ready to run!
              40 HP, Zenar, AC, crane duty, fr. 365US, 1200 rpm, 230/460/3/60
              40 HP, 1200 rpm, AC 230/460/3/60, 60 minute cont. duty, crane duty, frame 365US, mfg. Zenar, will sell EOK or rebuilt & gauranteed
              • Motor: 40HP
                2500 ton Open Die, Forging Press, Birdsboro, 30" stroke, down acting
                2500 ton open die, hot forging press, mfg. Birdsboro, 30" stroke, down acting, water hydraulic, can be converted to oil hydraulic
                • Tonnage: 2500T
                • Stroke: 30"
                  20,000# x 48" wide, Loopco "L" type coil car
                  20,000# x 48" wide, Loopco coil car, "L" type design, self contained powered raise/lower and travel, good running condition
                  48" x 20,000# Loopco uncoiler, hyd. expansion, slide base, air brake
                  48" wide x 20,000# capacity, mandrel type uncoiler, mfg. Loopco, 20" to 24" hydraulic expanding mandrel, slide base, Wichita air brake, good running condition! (no snubber arm)
                  • Maximum weight capacity: 20000Lb
                  • Maximum coil width: 48"
                    MAZAK e500HS series II INTEGREX MULTI-TASKING TURNING CENTER
                    Specifications Maximum swing over bed: 32.28" Maximum swing over carriage: 32.28" Maximum machining diameter: 32.28" Maximum distance between centers: 1
                    • Swing: 32.28"
                    • Centers: 120"
                      NTC TLM-610 (2014)
                      The TLM Series of 5-axis laser cutting systems simplifies the processing of 3-dimensional workpieces to perform any number of cutting tasks. Run programs from G code or an NTC-developed simplified coding process. A simpl
                      • Wattage: 3300W
                      • X axis travel: 10'
                        Sunstrand/Arter Grinder
                        Sunstrand Rotary Surface Grinder 9" Height Under Wheel Convex & Concave Tilt of work table
                        BRIDGEPORT 3 AXIS SERIES I CNC VERTICAL MILL (1984)
                        TABLE SIZE ----- ( OVERALL ) -------------- 16-1/8" X 42" TABLE SIZE ----- ( WORKING SURFACE ) ------ 12-1/2" X 34" TABLE POSIITONING SPEED ------------------- 250 IPM TABLE TRAVEL --- ( X-AXIS ) ------------
                        • Table width: 12.5"
                        • Table length: 34"
                          MacAir HX100A Refrigerated Air Dryer
                          MacAir HX100A Refrigerated Air Dryer 100 scfm air capacity 115-230/60/3 voltage, ½ Hp Ref. Comp. 1-1/2” NPT air inlet & outlet R134a Freon With Pre Air filter
                          KURAKI KBT-13A CNC (1998)
                          SPECIFICATIONS: SPINDLE BAR 5.12" SPINDLE TAPER ISO 50 SPINDLE MOTOR HP APPROX. 30 HP TRAVELS: X AXIS 118" Y AXIS 78.74" Z AXIS 51" W AXIS TRAVEL 27.56" TABLE SIZE 65" X 72" T-SLOTTED 60 POSITION AUTOMATIC TOOL
                          Famco Model 6H520 hydraulic power squaring shear 16GA mild steel
                          Used Famco model 6H520 hydraulic power squaring shear 16 GA mild steel. 52" cut Used to cut laminate. Serial # HS-06885186. was $15,500 new.
                          • Maximum thickness: 16Ga
                          • Cutting length: 52"
                            OKUMA MA-400HA HMC (2009)
                            Pallet Size 15.75" (2) Travel: X-Axis 22.05" Y-Axis 24.01" Z-Axis 24.61" Pallet Index .001 Degrees Spindle Speed 50 - 15,000 RPM Spindle Taper Cat 40 Spindle Motor 20 / 15 HP Spindle Center to
                            • X axis: 22.05"
                            • Y axis: 24.01"
                              Blanchard 22K 42
                              Chuck Size 42" Diameter Range 48" Chuck Pole Spacing 5/8" Chuck Center Hole 2" Grinding Wheel 22"
                              Blanchard 18-36
                              Table Chuck Diameter - 36" Max Swing Inside Guard - 40" Segmented Wheel Diameter - 18" Max Work Height Under Wheel - 11"
                              • Chuck: 36"
                                Blanchard 42-84
                                Range: 85" Diameter x 24" High Wheel: 42" Segmented Swing Inside Guards: 86" Maximum Height Under Wheel w/New Segments: 24"
                                Boyar Schultz H618
                                Table longitudinal travel: 19-7/8" Table cross feed: 6-13/16" Maximum work height under wheel: 12-1/8" over table Maximum work height under wheel: 9-1/2" over chuck Work surface: 5-5/8" x 18"
                                • Table width: 5.63"
                                • Table length: 18"
                                  Devlieg 3H-72
                                  Spindle Size 3" Spindle Taper #40 Taper Spindle Speed 25-1,200 RPM Spindle Motor 10 HP Table Size 35" x 72" X-Axis Travel 72" Y-Axis Travel 36" Z-Axis Travel 16" W-Axis Travel 16" Machine Weight 32,900 lbs F
                                  • Spindle diameter: 3"
                                    Devlieg 4K-60
                                    Spindle Diameter: 4" Spindle Nose Taper: #50 (with Power Draw Bar) Spindle Travel: 48" - Vertical (Y-Axis) 20" - Horizontal (19) Spindle Speeds: 14 - 1450 RPM (16) Spindle Feeds: .0013 IPR - .167 IPR Table Size: 40
                                    • Spindle diameter: 4"
                                    • Vertical travel: 48"
                                      DoAll C-1213NC
                                      SPECIFICATIONS WIDTH 1 1/4" THICKNESS .042" LENGTH 12'
                                      DoAll TF-14H
                                      Horizontal Capacity 14' Vertical Capacity 21" Blade Dimensions (LxWxT) 171" X 1" X .035" Wheel Diameter 14" Table Height 38" Working Surface 36" x 27" Max. Vise Opening 14-1/2" Vise Height (Standard) 10" Main Dri
                                      Cordax RS-115 DCC
                                      Machine Specifications Maximum Height 20" Maximum Length 76" Maximum Width 47"
                                      Brown & Sharpe Global Performance 5 7 5
                                      Brown & Sharpe Global Performance 5 7 5
                                      Hurricane Systems/Midbrook 5018B - Wash-B/O Conveyor Washer
                                      Category: Continuous Type: Conveyor Washer Heated: Natural Gas Voltage: 480/3/60 Work Area: 18'W x 12"H - Work Opening External Dimensions: 7'W x 7'H x 15'L - Approx. Controls: Mounted and wired in an enclosure att
                                      Automated Finishing, Inc. PDW-49 4 Stage Conveyor Washer
                                      Category: Continuous Type: 4 Stage Conveyor Washer Heated: Electric Max. Temperature: N/A Voltage: 460/3/60/145 FLA Work Area: 21 -1/2"w x 15"h External Dimensions: 65"w x 96"h x 21'l Controls: Mounted and wired i
                                      250 TON MINSTER HEVI-STAMPER STRAIGHT SIDE PRESS (1980) MODEL: #E2-250-84-5
                                      SPECIFICATIONS: Capacity: 250 Tons Stroke: 12” Shut Height: 40” Slide adjustment: 6” Bed & Ram Area: 84” L-R x 50” F-B Speeds: 30 - 60 SPM Windows: Yes Equipped With: Minster Air Clutch & Brake Ai
                                      • Tonnage: 250T
                                      • Tonnage: 250T
                                      • Tonnage: 250T
                                        OKUMA & HOWA CNC Millac 630H (2005)
                                        EQUIPPED WITH: Fanuc 16IM CNC Control, Rigid Tapping, Helical Interpolation, Multiple Part Program Storage, 24.8" x 24.8" Pallets, Full 4th Axis Pallet Rotation, 80 Position Automatic Tool Changer, RS-232 Port, Full C
                                        • X axis: 40"
                                        • X axis: 40"
                                        • X axis: 40"
                                          250 TON VERSON SSDC PRESS MODEL: S2-250-96-48
                                          BED AREA: 96" x 48" SLIDE AREA: 96" x 48" STROKE: 12" SHUT HEIGHT: 30.5" ADJUSTMENT: 8" WINDOWS: 28" WIDE SPM: 25 OVERALL DIMEMSIONS: 19'8" H EQUIPPED WITH: 6" BOLSTER 52" FROM FLOOR TO TOP OF BOLSTER T-SLOTTE
                                          • Tonnage: 250T
                                          • Tonnage: 250T
                                          • Tonnage: 250T
                                            TSUGAMI BS-32C MARK III CNC SWISS TYPE LATHE (2006)
                                            GENERAL SPECIFICATIONS Control: Fanuc 18iTB Maximum Bar Diameter: 1 1/4" Z1-Axis Travel (synchronous to "Z2"): 9.75" Main Spindle: Spindl
                                            Mori Seiki SH-63 HMC
                                            PALLETS (X) 24.8" X 24.8" LOAD CAPACITY 2640 LBS PALLET CHANGING TIME 15 SEC TABLE INDEXING TIME 2.3 SEC TABLE INDEXING 1-DEGREE CUTTING FEEDRATES 0.01-630 IPM RAPID TRAVERSE RATE XYZ 12
                                            • X axis: 33.1"
                                            • X axis: 33.1"
                                            • X axis: 33.1"
                                              Mazak Integrex 400-4 Multi-Tasking CNC Lathe (2008)
                                              Specifications: Maximum Swing........................... 30" NOTE: Tool eye body may limit max. swing. Maximum Swing using Y-axis.............. 26"-30" Maximum Swing over Cross Slide.......... 30" Maximu
                                              85 Ton Niigata Vertical Injection Molding Machine (1993)
                                              Control: NED 75-VR Sizeshot: 4.5 Tonnage 85 Ton Shot Size 4.5 oz Daylight 18.5" Mold Opening Stroke 9.8" Min Mold Height 8.7" Equipped with: Rotary Table Diameter 47.5"
                                              • Clamping force: 85T
                                              • Clamping force: 85T
                                              • Clamping force: 85T
                                                MORI SEIKI SH5000/40(2) MACHINE 24 PALLET CNC HORIZONTAL FMS SYSTEM (2002)
                                                SPECIFICATIONS: (26) 19.7" PALLETS X Axis Travel :..........31" Y Axis Travel :..........27" Z Axis Travel :..........27" Tool Stations :..........240 TOOLS 4th AXIS ................360,000 DEG Motor Power : SPIN
                                                • X axis: 31"
                                                • X axis: 31"
                                                • X axis: 31"
                                                  Mori Seiki NL-1500-SY Turning Center (2010)
                                                  Specifications: Bar Cap: 2" Chuck Size: 6" Spindle Speed: 6000 Turning Dia.: 14" Swing over bed: 36" Swing over Cross slid
                                                  • Swing: 36"
                                                  • Swing: 36"
                                                  • Swing: 36"
                                                    Mori Seiki NT3150 DCG/1500SZ (2006)
                                                    Specifications (To Be Verified): Chuck Size: 6" Main and Sub Standard Bar Capacity: 2-1/8" Between Centers: 59.1" Turning Diameter:
                                                    Studer S40 CNC Cylindrical Grinder (1993)
                                                    SPECIFICATIONS Spec Inch Metric Control Fanuc 16GC Year 1993 Wheelhead Angle/Straight" 0mm Center Height 6.875" 175mm Center Distance 40" 1016mm Max Workpiece Weight 287 lbs 130 kg
                                                    Cincinnati Gilbert 3.5” Horizontal Boring Mill
                                                    Cincinnati Gilbert 3.5” Diameter Table Style Horizontal Boring Mill w/Trak 102 2-Axis Digital readout system General Specifications Table Size ----------------------------------------- 53" x 78-1/2", Table Travels---
                                                    • Spindle diameter: 3.5"
                                                      Milford Model 255 Riveter
                                                      Capacity: Up to .125" (3.17 mm) diameter x .562" (14.28 mm) long, mild steel semi-tubular rivets; Throat depth: 12.00" (304.8 mm) Hopper type: 5.25 dia. mechanical Ram stroke: 2.50" (63.5 mm) Machine cycle time: 0.4
                                                      20" BLANCHARD VERTICAL SPINDLE ROTARY SURFACE GRINDER (1970)
                                                      TABLE DIAMETER:......................................................... 20" MAXIMUM SWING INSIDE SPLASH GUARDS:........... 20-1/2" MAXIMUM WORK HEIGHT UNDER NEW 11" DIA. CYLINDER GRINDING WHWEEL:...................
                                                      Hurco TMM10 3 Axis Turning Center (2008)
                                                      Specifications: Travel: 9.8 X, 29.5 Z in Max. Turning Dia: 11.6 in Max. Turning Length: 27.6 in Max. Bar Capacity: 3 in Spindle: 3k, 350 ft-lbs @ 360 Live Tool
                                                      Mazak QT-20 (1997)
                                                      SPECIFICATIONS: Year 1997 Control Mazatrol T-Plus Swing 17.32" Turning Diameter 11.81" Centers Distance 17.5" Travels (X) 7.125" Travels (Z) 20.125" Rapid Traverse (X) 1,200 IPM Rapid Traverse (
                                                      • Swing: 17.32"
                                                      • Centers: 17.5"
                                                        MAKINO S56 (2007)
                                                        SPECIFICATIONS: TRAVELS (X) 35.4" (Y)19.7" (Z) 19.7" SPINDLE SPEED 13,000 RPM SPINDLE NOSE CAT 40 RAPID TRAVERSE 1574 IPM CUTTING FEEDRATE 1574 IPM MAX TABLE LOAD 1,100 LBS
                                                        • X axis: 35.4"
                                                        • Y axis: 19.7"
                                                          AMADA 50 TON PRESS BRAKE
                                                          CATALOG SPECIFICATIONS: Overall Length of Die Surface ........................ 96" (8') Maximum Bending Length................................ 96" (8') Distance Between Housings ............................ 80.8"
                                                          • Tonnage: 50T
                                                            BURRMASTER #1 Brush Deburring Machine 3" OD x 120" Max.
                                                            419-872-2364 / [email protected] 3" OD x 120" Max. length BURRMASTER #1 Brush Deburring Machine, Stock #1832 SPECIFICATIONS: - Tube Length: 6" - 120" (150 mm - 3,048 mm) - Tube Diameter: 3/8" - 3.0" (10 mm
                                                            SKODA W 150 HBM (1998)
                                                            Spindle Diameter: 5.9" Spindle Taper: #50 With Power Draw Bar Spindle Travel (Z-Axis): 39" Quill Size: 15" x 15" Quill Travel (W Axis): 31" Spindle Speeds: 2-2300 RPM Spindle Drive Motor: 68 Horse
                                                            • Spindle diameter: 5.9"
                                                            • X axis travel: 393"
                                                              LVD 240 Ton Hydraulic Down Acting Press Brake (1995)
                                                              Specifications: Capacity: 240 Ton Bed Plate: 15’ 11.5” Ram: 13’ 9.5” Distance Between Housings: 12’ 4” Daylight: 20” to bed / 16” to plate Stroke: 8” Shut Height to bed: 12” Shut Height to plate: 8” Hydraulic
                                                              • Tonnage: 240T
                                                                MATTISON 18-36 ROTARY SURFACE GRINDER
                                                                Magnetic Chuck Diameter: 36” Maximum Swing Inside Guards: 38” Grinding Wheel Diameter: 18” Vertical Capacity, Wheel to Chuck: 12”
                                                                Blanchard 32-60
                                                                SPECIFICATIONS: DIAMETER OF MAGNETIC CHUCK.............. 60" APPROXIMATE CHUCK LIFE.................. 5/8" DIAMETER OF GRINDING WHEEL.............. 32" SWING INSIDE WATER GUARDS............... 74" MAX. DIST. UNDER A
                                                                • Chuck: 60"
                                                                  Makino A100E (2002) HMC
                                                                  Specification: Control Pro 3 (Fanuc) Pallets (2) 39.4" x 39.4" Max. Weight on Pallet 6,600 lbs Max. Workpiece 74.8" x 59.1" TRAVELS: X-Axis 66.9" Y-Axis 53.1" Z-Axis 53.1" Spindle Motor 40 Max. Spindle Spee
                                                                  • X axis: 66.9"
                                                                  • Y axis: 53.1"
                                                                    Clark C500S80 Forklift
                                                                    8000 lbs Capacity Triple Lift Fork Rebuilt Hydraulics
                                                                    • Lifting capacity: 8000T
                                                                      AMADA 100 TON
                                                                      Ask for more details
                                                                      • Tonnage: 100T
                                                                        DOOSAN MV-6030 VERTICAL MACHINING CENTER(2007)
                                                                        SPECIFICATIONS: X-AXIS TRAVEL........................... 60" Y-AXIS TRAVEL........................... 30" Z-AXIS TRAVEL........................... 24.6" DISTANCE FROM SPINDLE NOSE TO TABLE TOP. 5.9" TO 30.5" DISTANC
                                                                        • X axis: 60"
                                                                        • Y axis: 30"
                                                                          Mori Seiki SL-3B (1981)
                                                                          Specifications: Swing Over Bed: 22.4" Swing Over Cross Slide:13.8" Maximum Cutting Diameter:10.2" Maximum Turning Length: 22.0" Distance Between Centers: 24.0" Travels – X-Axis: 6.3" - Z-Axis: 22.0"
                                                                          • Swing: 22.4"
                                                                          • Centers: 24"
                                                                            Doosan HC 400 (2007)
                                                                            Specifications: Pallet Size / Number of Pallets: 15.7" x 15.7" / 2 plts Table Indexing: 1 Degree Indexing Table Load Capacity: 882 lbs. X-Axis Travel: 23.6" Y-Axis Travel: 22" Z-Axi Travel: 22.2" Spindle Nose: CAT
                                                                            • X axis: 23.6"
                                                                            • Y axis: 22"
                                                                              50W SHENZHEN LIGHTSTAR YAG CNC LASER MARKING MACHINE
                                                                              50W SHENZHEN LIGHTSTAR YAG CNC LASER MARKING MACHINE MODEL GD-YAG-M50 LASER POWER -------------------------------- 50W WAVE LENGTH ------------------------------- 1064 NM BEAM QUALITY
                                                                              INDUSTRIAL ROLL-OUT HEAVY DUTY SHELVING RACK
                                                                              INDUSTRIAL ROLL-OUT HEAVY DUTY SHELVING RACK NUMBER OF SHELVES ------------------------- 4 ROLL-OUT SHELF DIMENSIONS --------------------------- 47" X 48" EA. LOAD CAPACITY PER SHELF -----------
                                                                              BURRMASTER #1 Brush Deburring Machine 1" OD x 36" Max.
                                                                              419-872-2364 / [email protected] BURRMASTER #1 Brush Deburring Machine 1" OD x 36" Max., Stock #2514 SPECIFICATIONS: - Tube Length: 6" - 36" (150 mm - 914 mm) - Tube Diameter: 3/8" - 1.0" (10 mm - 25 mm) -
                                                                              • Maximum sheet width: 36"
                                                                                Dahlih DL-V860 CNC Vertical Milling
                                                                                Dahlih CNC Vertical Milling DL-V860 with Anilam Control s/n V76033
                                                                                50 TON EUROMAC HYDRAULIC SINGLE END PUNCH, MODEL XP-750/50
                                                                                50 TON EUROMAC HYDRAULIC SINGLE END PUNCH MODEL XP-750/50 NEW 1996 CAPACITY ------------------------------------ 50 TON TABLE SIZE -----------
                                                                                DOOSAN PUMA 480L (2011)
                                                                                Fanuc 21iM CNC control, 35.4" sw. over bed, 25.6" max. turning dia., 80.4" max. turning length, 10-1/2" spndl. bore, 3-750 RPM, front and rear chucks, 60HP, SMW Mdl. SLU-5.25 hyd. steadyrest, 12-pos. vert. turret, tails
                                                                                • Swing: 35.4"
                                                                                • Centers: 80.4"
                                                                                  DOOSAN PUMA 800L (2012)
                                                                                  Fanuc Series 32i-Model A CNC control, 40'6" sw. over bed, 31.5" sw. over saddle, 35.43" max. turning dia., 125.98" max. turning length, spds: 750 RPM, 60 HP, 12-1/2" spndl. bore, 10.5" bore front and rear chucks, 12-sta
                                                                                  • Swing: 40.6"
                                                                                  • Centers: 126"
                                                                                    DAH LIH HC2000 (2012)
                                                                                    SPECIFICATIONS: Spindle Diameter 5.12" Taper in Spindle 50 Spindle Speed 2500 RPM Travels Vertical Y-Axis 80.7" Table Travel X-Axis 157.5" Spindle Travel Z-Axis 5
                                                                                    • X axis: 78.7"
                                                                                    • Y axis: 39.4"
                                                                                      DOALL C916M Horizontal Bandsaw
                                                                                      DOALL C916M Horizontal band saw for sale. machine in good working condition. comes with 4 gravity feed tables. 3- 5 foot tables 1-10 foot table
                                                                                      AMADA PEGA LOADER TABLE
                                                                                      LOAD AND UNLOAD SYSTEM MACHINE
                                                                                      SNAP-ON 80-GALLON AIR COMPRESSOR - BRA7180V - 7HP, 175 MAX. PSI
                                                                                      Make: Snap-On / Sleegers Tanks Inc. Model #: BRA7180V Serial #: JAC11048-015 Condition: Like NEW!!! Specifications: Total Run Time: 2.4 hours Mag Starter: Yes Tank Style: Vertyical Horsepower (HP): 7.0 Air D
                                                                                      DMC MODEL DT-40 DRILLING AND TAPPING CENTER
                                                                                      DMC MODEL DT-40 DRILLING AND TAPPING CENTER MANUFACTURED 2011 RACO Stock Number R060466 TRAVEL ----------- ( X AXIS ) ------------------------ 24.6" TRAVEL ----------- ( Y AXIS ) ------------------------ 15.7
                                                                                      • X axis travel: 24.6"
                                                                                        3" (76mm) BIGWOOD #1B Bar/Tube 7-Roll Straightener
                                                                                        419-872-2364 / [email protected] 3" (76mm) BIGWOOD #1B Bar/Tube 7-Roll Straightener, Stock #2519 SERIAL NUMBER: - 28921 AGE: - 1970 SPECIFICATIONS: - Maximum Bar Capacity: 2" (50 mm) - Minimum Bar
                                                                                        • Bar diameter: 2"
                                                                                        • Tube diameter: 3"
                                                                                          18" x .070" x 6,000Lb Morvay Slitting Line
                                                                                          Material Width: 18" Weight Capacity: 6,000Lb Material Thickness: .008" - .070" Coil ID: 20" Coil OD: 72" Direction: Left to Right Mandrel Uncoiler Disc Brake Powered Mandrel Expansi
                                                                                          • Maximum workpiece width: 18"
                                                                                          • Maximum workpiece thickness: 0.07"
                                                                                            MAZAK SQR-200 (2005)
                                                                                            Specifications: GENERAL SPECIFICATIONS: MANUFACTURER.......................... MAZAK MODEL................................. SQR-200 AGE................................... 2005 SERIAL NUMBER.........................
                                                                                            • Swing: 23"
                                                                                            • Centers: 24"
                                                                                              DMC DL80VL CNC VERTICAL TURNING CENTER
                                                                                              DMC DL80VL CNC VERTICAL TURNING CENTER MODEL DL80VL MANUFACTURED 2013 RACO Stock Number R060463 MAXIMUM TURNING DIAMETER ------------------- 28.74" MAXIMUM TURNING LENGTH ---------------------- 29.53" T
                                                                                              Blanchard 22D42
                                                                                              ASK FOR DETAILS
                                                                                              • Chuck: 42"
                                                                                                DMC DL80V CNC VERTICAL TURNING CENTER
                                                                                                DMC DL80V CNC VERTICAL TURNING CENTER MODEL DL80V MANUFACTURED 2013 RACO Stock Number R060463 MAXIMUM TURNING DIAMETER ------------------ 28.74" MAXIMUM TURNING LENGTH --------------------- 29.53" TRAV
                                                                                                DMC DL22MB CNC TURNING CENTER, WITH LIVE MILLING & C-AXIS
                                                                                                DMC DL22MB CNC TURNING CENTER WITH LIVE MILLING & C-AXIS MANUFACTURED 2013 RACO Stock Number R060462 SWING OVER BED -------------------------------- 21.65" SWING OVER CARRIAGE ------------------------- 1
                                                                                                • Swing: 21.65"
                                                                                                  DMC DL21MA CNC TURNING CENTER, WITH LIVE MILLING & C-AXIS
                                                                                                  DMC DL21MA CNC TURNING CENTER WITH LIVE MILLING & C-AXIS MANUFACTURED 2012 RACO Stock Number R060461 SWING OVER BED -------------------------------- 21.65" SWING OVER CARRIAGE ------------------------- 1
                                                                                                  • Swing: 21.65"
                                                                                                    NEW!!! SHARP 1340VS DIGITAL VARIABLE SPEED PRECISION LATHE
                                                                                                    We are an authorized dealer of Sharp. Let us know if you are in the market for a particular machine and/or tooling. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the qu
                                                                                                    • Swing: 13"
                                                                                                    • Centers: 40"
                                                                                                      Hardinge HCTCFR Chucking Lathe-Turning-Threading
                                                                                                      Make: Hardinge Model #: HCTCFR Serial #: 30851 Condition: Good The HCT Chucking Lathe can finish diameters, shoulders, end faces, and cut precision threading in one setting-all concentric with each other. Adjust
                                                                                                      • Swing: 13"
                                                                                                      • Centers: 31"
                                                                                                        TANNEWITZ Model 3000-MH8 Vertical Band Type Plate Saw; Traveling Head Desig
                                                                                                        8" x 144" TANNEWITZ Vertical Band Type Plate Saw Plate Capacity: Length...................................................144" (maximum) Width......................................................6&q
                                                                                                        • Length capacity: 144"
                                                                                                        • Thickness capacity: 8"
                                                                                                          CLEVELAND LARGE FRAME K4V VERTICAL MILL
                                                                                                          Large Frame & Heavier Duty Head 11" x 52" Table Servo Feed X & Y Mitutoyo 2 Axis Digital Readout System AL-325L 4 HP Pneumatic Draw Bar Spray Mist Coolant Auto Lube System
                                                                                                          • Table width: 11"
                                                                                                          • Table length: 52"
                                                                                                            SIRCO LATHE 36" X 120"
                                                                                                            CAPACITY SWING OVER BED 36" CAPACITY OVER CROSSLIDE 25" CAPACITY OVER REMOVABLE GAP 48" DISTANCE BETWEEN CENTRES 120" HEADSTOCK DIAMTER OF SPINDLE BORE 5 1/2" HEADSTOCK: NUMBER OF SPINDLE SP
                                                                                                            • Swing: 36"
                                                                                                            • Centers: 120"
                                                                                                              Price:
                                                                                                              •  to 
                                                                                                              <Prev | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | Next>