buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 100 of 20989 matches
Sort by:
Items Per Page:  20 |  50 |  100
2023 Bobcat MT100 Mini Compact Track Loader RTR#5023469-01
$29,000
2023 Bobcat MT100 Mini Compact Track Loader RTR#5023469-01
Unit located in Raleigh, NC. 2023 Bobcat MT100 Mini Compact Track Loader w/ Bucket, Hour Meter Reads: 367.2 (Unverified), S/N: B52P33372 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered.
2021 Avant 528 Wheel Loader RTR#4123849-02
$32,000
2021 Avant 528 Wheel Loader RTR#4123849-02
Unit located in Jacksonville, FL. 2021 Avant 528 Wheel Loader, Kubota D1105 Diesel Engine, Hyd Transmission, 4WD, Hour Meter Reads: 1,265 (Unverified), S/N: 104457 All equipment is sold “As Is, Where Is”. Reasonable o
2011 Ditch Witch SK650 Stand-On Skid Steer RTR#5013434-01
$9,500
2011 Ditch Witch SK650 Stand-On Skid Steer RTR#5013434-01
Unit located in San Antonio, TX. 2011 Ditch Witch SK650 Stand-On Skid Steer, Kubota D1105T Diesel Engine, Hyd Transmission, Hour Meter Reads: 2,009 (Unverified), S/N: CMWSK650PB0001936 All equipment is sold “As Is, Whe
BROWN & SHARPE No 2 UNIVERSAL GRINDER (14515)
$RFQ
BROWN & SHARPE No 2 UNIVERSAL GRINDER (14515)
MANUFACTURER: BROWN & SHARP MFG. CO.(USA)STOCK # 14515TYPE: UNIVERSAL CYLINDRICAL GRINDERMODEL: NO. 2GRINDING WHEEL DIAMETER: 12-16"CONTROLS: 440 VOLT, 110 CONTROL VOLTS, 7 AMPS, 3 PHASE, 60 HZEQUIPPED WITH SPARK
10" X 48" LANDIS MODEL 3R GRINDER (14513)
$RFQ
10" X 48" LANDIS MODEL 3R GRINDER (14513)
Swing 10 inches Centers 48 inches
RAD-CON BELL ANNEALING FURNACES FOR COPPER (14512)
$RFQ
RAD-CON BELL ANNEALING FURNACES FOR COPPER (14512)
STOCK # 14512MANUFACTURER: RAD-CON INC. (USA)TYPE: BELL ANNEALING FURNACE FOR NON-FERROUS COILSFUEL: NATURAL GAS WITH ATMOSPHEREINSIDE DIMENSIONS:-DIAMETER: 84" (2133 MM)-HEIGHT: 70" (1778 MM)YEAR OF MANUFACTURE: 2011MAX
Mitts & Merrill Keyseater, Model No.2
$RFQ
Mitts & Merrill Keyseater, Model No.2
Keyway Width 1.25 inches Keyway Length 18
Standard Machinery 14" x 18" 2Hi Bonding Mill
$RFQ
Standard Machinery 14" x 18" 2Hi Bonding Mill
WORK ROLL DIAMETER 14 inches WORK ROLL WIDTH
Bliss 9" x 22" x 20" 4Hi Work Roll Driven Bonding Mill
$RFQ
Bliss 9" x 22" x 20" 4Hi Work Roll Driven Bonding Mill
BACKUP ROLL DIAMETER 22 inches BACKUP ROLL WIDTH
CINCINNATI 52" VERTICAL TURRET LATHE
$9,950
CINCINNATI 52" VERTICAL TURRET LATHE
58" SWING, 114" DEEP, 152" BRIDGE, 126" TALL
  • Swing: 58"
    2021 Mayco C-30HDGA Towable Concrete Pump RTR#3073765-01
    $12,500
    2021 Mayco C-30HDGA Towable Concrete Pump RTR#3073765-01
    Unit located in Fairhope, AL. 2021 Mayco C-30HDGA Towable Concrete Pump, Hour Meter Reads: 389 (Unverified), VIN: 3AUBC1213MM020591 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can
    2017 Takeuchi TB240 Compact Excavator RTR#5063358-01
    $25,000
    2017 Takeuchi TB240 Compact Excavator RTR#5063358-01
    Unit located in Picayune, MS. 2017 Takeuchi TB240 Compact Excavator w/ 16" Bucket & Blade, Open Cab, Hour Meter Reads: 2,307 (Unverified), S/N: 124002299 All equipment is sold “As Is, Where Is”. Reasonable of
    Est. 2021 Desco Portable Tire Shear, Model 2906 RTR#5063701-01
    $28,500
    Est. 2021 Desco Portable Tire Shear, Model 2906 RTR#5063701-01
    Unit located in O’Fallon, MO. Est. 2021 Desco Portable Tire Shear, Model 2906, 30 HP Gas Engine, 45 Gallon Hydraulic Fluid Tank, 13-15 Second Tire Shear Time, Single Man Operation All equipment is sold “As Is, Where Is
    2022 ASV RT-40 Compact Track Loader RTR#5063552-01
    $32,500
    2022 ASV RT-40 Compact Track Loader RTR#5063552-01
    Unit located in Thonotosassa, FL. 2022 ASV RT-40 Compact Track Loader w/ Bucket, Kubota D1803-CR-T 37.5 HP 3-Cylinder Diesel Engine, Hyd Transmission, Open Cab, Hour Meter Reads: 301 (Unverified), S/N: ASVRT040JNDS07049
    2022 - 1,500 Watt IPG Light Weld Portable Laser Welder
    $RFQ
    2022 - 1,500 Watt IPG Light Weld Portable Laser Welder
    Laser Power 1500 Watts High Peak Power 2500 Watts Mode Storage Capacity 74 Wobble Length .2" Wobble Frequency Up to 300 Hz Equipped with: IPG Power Source (1500W Average Power w/ 2500W Peak Power) Welding G
    • Power: 1.5KVA
      1993 - 88 Ton Amada RG-80 CNC Press Brake
      $RFQ
      1993 - 88 Ton Amada RG-80 CNC Press Brake
      Capacity 88 Tons Overall Bending Length 98" Distance Between End Frames 86" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 140"x60&qu
      • Tonnage: 88T
        2024 Takeuchi TL8R2 Compact Track Loader RTR#5053035-01
        $52,000
        2024 Takeuchi TL8R2 Compact Track Loader RTR#5053035-01
        Unit located in Glasgow, KY 2024 Takeuchi TL8R2 Compact Track Loader, Enclosed Cab w/ Heat & A/C, Kubota V3307-CR-Turbo Engine, Rear View Camera, Hour Meter Reads: 283 (Unverified), S/N 408007406 All equipment is
        Eagle Super Slicer w/ Kohler 20.5 HP Gas Motor RTR#5063364-01
        $13,000
        Eagle Super Slicer w/ Kohler 20.5 HP Gas Motor RTR#5063364-01
        Unit located in O’Fallon, MO. Est. 2022 Eagle International Super Slicer w/ Kohler 20.5hp Gas Motor and 8 Inch Cutter Blade, Hydraulic Bead Adjustment, Rubber Torsion Suspension, Hour Meter Reads: 828 (Unverified), S/
        Est. 2023 Industrial Pro Series 4x8 CNC Router RTR#5053787-03
        $8,000
        Est. 2023 Industrial Pro Series 4x8 CNC Router RTR#5053787-03
        Equipment located in O’Fallon, MO. Est. 2023 Industrial CNC Pro Series 4' x 8' CNC Router w/ Vacuum Hold Down Table, Mini Computer, Monitor, & Additional Related Accessories, 3Ph/240v/60Hz, S/N: 0408-V3-18
        (2) Est. 2022 Industrial Pro Series 4x8 CNC Router RTR# 5053787-01-02
        $7,500
        (2) Est. 2022 Industrial Pro Series 4x8 CNC Router RTR# 5053787-01-02
        Equipment located in O’Fallon, MO. **2 Available** Est. 2022 Industrial CNC Pro Series 4' x 8' CNC Router w/ Vacuum Hold Down Table, Mini Computer, Monitor, & Additional Related Accessories, 3Ph/240v/60Hz
        5" x 5" x 1/2" Roundo R5S Angle Bending Roll, Never in Serv
        $75,000
        5" x 5" x 1/2" Roundo R5S Angle Bending Roll, Never in Serv
        . We are pleased to offer for your consideration: (1) 5" x 5" x 1/2" Roundo Hydraulic Angle Bending Roll Stock Number: 13839 List Price: $75,000 Manufacturer: Roundo Model Number: R5S Diamet
        • Length: 5"
        • Width: 0.5"
          SARGEANT & WILBUR 12 STRAND COPPER WIRE ANNEALNG FURNACE (14511)
          $RFQ
          SARGEANT & WILBUR 12 STRAND COPPER WIRE ANNEALNG FURNACE (14511)
          MANUFACTURER: SARGEANT & WILBUR (USA)STOCK # 14511TYPE: 12 STRAND WIRE ANNEALING FURNACE FOR COPPERMODEL NO: 0101274-12TSERIAL NO. 9812-M4-FNO. OF WIRE STRANDS: 12 (SEE NOTE BELOW)TYPE OF WIRE: COPPERMAX. TEMPERA
          VAUGHN WIRE DIE STRINGER (14510)
          $RFQ
          VAUGHN WIRE DIE STRINGER (14510)
          MANUFACTURER: VAUGHN MACHINERY CO. (USA) NOW MORGAN KOCHStock # 14510TYPE: CONTINUOUS DIE STRINGERPURPOSE: TO POINT WIRE FOR INSERTION INTO MULTI-DIE WIRE   DRAWERS BY STRINGING THE WIRE THROUGH ALL OF
          PWM BUTT WELDER MODEL EP 500 (14509)
          $RFQ
          PWM BUTT WELDER MODEL EP 500 (14509)
          PWM BUTT WELDERSTOCK # 14905MANUFACTURER: PRESSURE WELDING MACHINES (UK) LTDMODEL: EP 500PURPOSE: TO BUTT WELD COPPER AND ALUMINUM RODS TOGETHERCAPACITY IN MAX. DIAMETER:-COPPER: 0.2"-0.5" (5-12.5 MM)-ALUMINUM: 0.2"-0.6"
          3/8" Vaughn Model 10 DST 10 Die Wire Drawing Machine (14508)
          $RFQ
          3/8" Vaughn Model 10 DST 10 Die Wire Drawing Machine (14508)
          Max Wire Dia. 0.375 inches Manufacturer: Vaughn Machinery Co. (USA)-Now Owned by Morgan
          30,000 LB X 48" B & K UNCOILER AND COIL CAR (14505)
          $RFQ
          30,000 LB X 48" B & K UNCOILER AND COIL CAR (14505)
          Max Weight of Coil 30000 pounds Max Width of Coil
          2-1/4" FENN MODEL 4-1/2F LONG 2 DIE SWAGING MACHINE (14504)
          $RFQ
          2-1/4" FENN MODEL 4-1/2F LONG 2 DIE SWAGING MACHINE (14504)
          Capacity, Tubes 2.250 inches Dimensions 5
          20,000 LB WEAN UNCOILER AND COIL CAR (14503)
          $RFQ
          20,000 LB WEAN UNCOILER AND COIL CAR (14503)
          Max Weight of Coil 20000 ounces Max Width of Coil
          CWP 20,000 LBS COIL REEL WITH COIL CAR MODEL 6R-36
          $RFQ
          CWP 20,000 LBS COIL REEL WITH COIL CAR MODEL 6R-36
          Max Weight of Coil 20000 pounds Max Width of Coil
          2.5" X 10" X 10" WATERBURY FARREL 4 HIGH NON REVERSING TEMPER ROLLING MILL
          $RFQ
          2.5" X 10" X 10" WATERBURY FARREL 4 HIGH NON REVERSING TEMPER ROLLING MILL
          Max Width Workpiece 10 inches Work Roll Dia.
          FENN 6F 4 DIE ROTARY SWAGING MACHINE, CAPACITY 4.5" TUBING, 2.250" SOLIDS, Stock
          $RFQ
          FENN 6F 4 DIE ROTARY SWAGING MACHINE, CAPACITY 4.5" TUBING, 2.250" SOLIDS, Stock
          4.5" FENN MODEL 6F 4 DIE SWAGERSTOCK #14500TYPE MACHINE:                     4 DIE ROTARY SWAGING MACHINEMANUFACTURER:&am
          4" VAILL MODEL 511 TUBE END FORMING MACHINE (14499)
          $RFQ
          4" VAILL MODEL 511 TUBE END FORMING MACHINE (14499)
          Tube Dia 5 inches 4″ Torrington Vaill 511 Tube End FormerStock # 14499&nb
          DN - Doosan DVF 5000 5-Axis CNC VMC, 18000 RPM, x-24", y-17", z-15", 120 AT
          $RFQ
          DN - Doosan DVF 5000 5-Axis CNC VMC, 18000 RPM, x-24", y-17", z-15", 120 AT
          CNC Control yes Type of CNC Control Fanu
          DN - Doosan DVF 5000 5-Axis CNC VMC, 18000 RPM, x-24", y-17", z-15", 120 AT
          $RFQ
          DN - Doosan DVF 5000 5-Axis CNC VMC, 18000 RPM, x-24", y-17", z-15", 120 AT
          CNC Control yes Type of CNC Control Fanu
          11" Swing 18" Centers Hardinge HLV-H Reground Bed New Turcite PRECISION ENGINE
          $30,500
          11" Swing 18" Centers Hardinge HLV-H Reground Bed New Turcite PRECISION ENGINE
          HARDINGE PRECISION LATHE MODEL: HLV-H, S/N: HLV-H-15475-T, NEW: 2000 MACHINE RECONDITIONED IN 2025   SPECIFICATIONS: SPINDLE CONSTRUCTION.................... HARDINGE BALL BEARING SPINDLE NOSE THREAD .......
          15" Swing 30" Centers Clausing-Colchester 15" 8030 ENGINE LATHE, Inch/Metri
          $4,950
          15" Swing 30" Centers Clausing-Colchester 15" 8030 ENGINE LATHE, Inch/Metri
          15" x 50" CLAUSING-COLCHESTER ENGINE LATHE MODEL: 8030, S/N: 6/0013/02841, NEW: 1975   SPECIFICATIONS: SWING OVER BED ....................... 15-1/4" SWING OVER CROSS SLIDE ............... 9-1/2&
          88" Table 30HP Spindle Kearney Trecker 430TF-20 HORIZONTAL MILL, #50 Taper,2 Arbor S
          $RFQ
          88" Table 30HP Spindle Kearney Trecker 430TF-20 HORIZONTAL MILL, #50 Taper,2 Arbor S
          KEARNEY & TRECKER HORIZONTAL MILLING MACHINE MODEL: #430 TF-20, S/N: 57-1003-05, NEW: 1970 W/DOUBLE SWIVEL VERTICAL ATTACHMENT   SPECIFICATIONS: TABLE WORKING SURFACE .................. 19-1/2" X 88&qu
          Star SR-16R 7-AXIS CNC SWISS TYPE LATHE, Fanuc 18iT, LNS GT 326E Mag. Barfeed
          $RFQ
          Star SR-16R 7-AXIS CNC SWISS TYPE LATHE, Fanuc 18iT, LNS GT 326E Mag. Barfeed
          STAR SR-16R SWISS TYPE CNC LATHE   EQUIPPED WITH:  - FANUC 18iT CNC CONTROL  - FULL C -AXIS ON MAIN & SUBSPINDLES  - 6 POSITION VERTICAL GANG SLIDE (FOR MAIN SPINDLE)  - 4 POSITION HORI
          42" Table 3HP Spindle Siber Hegner RB-1 First 305VS Bed Mill VERTICAL MILL, Vari-Spee
          $RFQ
          42" Table 3HP Spindle Siber Hegner RB-1 First 305VS Bed Mill VERTICAL MILL, Vari-Spee
          SIBER HEGNER VERTICAL BED TYPE MILL MODEL: RB-1, S/N: 78070810, NEW: 1988   SPECIFICATIONS: TABLE WORKING SURFACE ............... 9" x 42" SPINDLE RANGE:   SPINDLE SPEED (LOW RANGE) .......
          4.3" Spindle 63" X Axis Summit HBM-110 HORIZONTAL BORING MILL, #50 PDB, Rotary T
          $RFQ
          4.3" Spindle 63" X Axis Summit HBM-110 HORIZONTAL BORING MILL, #50 PDB, Rotary T
          SUMMIT TABLE TYPE HORIZONTAL BORING MILL MODEL: HBM-110, S/N: 16018, MFG: 2014   SPECIFICATIONS: SPINDLE: DIAMETER OF SPINDLE ................. 4.3″ TAPER OF SPINDLE .................... #50 SPINDLE SP
          Republic-Lagun TCG-106, NO. 2 Type, 2016, Helical Grinding Attch. TOOL CUTTER GRINDER, Mo
          $RFQ
          Republic-Lagun TCG-106, NO. 2 Type, 2016, Helical Grinding Attch. TOOL CUTTER GRINDER, Mo
            No. 2 Republic-Lagun Model: TCG-1016   Universal Tool and Cutter Grinder   ** Loaded with Many Accessories **     S/N: 22764    New: 2016   *** Lik
          17.7" Swing Leadwell LTC-20BM - LIVE TOOLING CNC LATHE, Fanuc 0i-TD, 8" Chk., Ta
          $RFQ
          17.7" Swing Leadwell LTC-20BM - LIVE TOOLING CNC LATHE, Fanuc 0i-TD, 8" Chk., Ta
          LEADWELL LTC-20BM CNC TURNING/MILLING CENTER NEW: 2012   SPECIFICATIONS: Swing                    17.7 inches Turni
          6" Width 18" Length Okamoto ACC-618DX3, 1995, PROG. AUTO IDF, 3X AUTO FEEDS SURF
          $RFQ
          6" Width 18" Length Okamoto ACC-618DX3, 1995, PROG. AUTO IDF, 3X AUTO FEEDS SURF
            6" X 18" OKAMOTO "HIGH-PRECISION" URFACE GRINDER    WITH "DX" PROGRAMMABLE AUTO INCREMENTAL DOWNFEED,    WITH MANY OPTIONAL ACCESSORIES (SEE BELO
          12" Width 24" Length Chevalier FSG-3A1224, 2016, 3X AUTO FEEDS, AUTO IDF SURFACE
          $RFQ
          12" Width 24" Length Chevalier FSG-3A1224, 2016, 3X AUTO FEEDS, AUTO IDF SURFACE
            12" X 24" CHEVALIER PRECISION SURFACE GRINDER   WITH PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED     MODEL: FSG-3A1224      NEW: 2016   MAX.
          Okuma LB-35III CNC LATHE, OSP P300L, 15" Chk., Toolsetter, Chip Conv.
          $RFQ
          Okuma LB-35III CNC LATHE, OSP P300L, 15" Chk., Toolsetter, Chip Conv.
          Okuma LB35 III x 850 CNC Chucker New: 2016   SPECIFICATIONS: Swing Over Bed:           27.56" Swing Over Carriage:      16.93"
          50" Table 3HP Spindle Sharp LMV-50 VERTICAL MILL, Vari-speed,R-8, Newall DRO, Power T
          $RFQ
          50" Table 3HP Spindle Sharp LMV-50 VERTICAL MILL, Vari-speed,R-8, Newall DRO, Power T
          SHARP VERTICAL MILLING MACHINE MODEL: LMV-50, S/N: 70330329, MFG: 2008   SPECIFICATIONS: WORKING AREA OF TABLE ................ 9" x 50" TABLE LONGITUDINAL TRAVEL ............ 37" TABLE CROSS TR
          Nakamura-Tome WT-150MMY CNC LATHE
          $RFQ
          Nakamura-Tome WT-150MMY CNC LATHE
          2004 Nakamura Tome WT-150MMY Twin Spindle, Dual Turret, & Live Tooling CNC Lathe   Specifications: Bar Capacity                 
          27.6" X Axis 17.7" Y Axis Brother TC-22B-0 VERTICAL MACHINING CENTER
          $RFQ
          27.6" X Axis 17.7" Y Axis Brother TC-22B-0 VERTICAL MACHINING CENTER
          BROTHER 5-AXIS DRILL AND TAPPING CENTER MODEL: TC-22B-0, NEW 2008   SPECIFICATIONS: X ........................ 27.6" Y ........................ 17.7" Z ........................ 16.1" POWER ..
          41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
          $RFQ
          41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
          MAZAK CNC VERTICAL MACHINING CENTER MODEL: VCN 510 C-II NEXUS,  S/N: 245787,   MFG: 2013      SPECIFICATIONS: X-AXIS ..................................... 41.03" Y-AXIS ........
          41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
          $RFQ
          41" X Axis 20" Y Axis Mazak VCN 510C-II NEXUS VERTICAL MACHINING CENTER, MAZATRO
          MAZAK CNC VERTICAL MACHINING CENTER MODEL: VCN 510 C-II NEXUS, S/N: 221971,   MFG: 2010      SPECIFICATIONS: X-AXIS ..................................... 41.03" Y-AXIS ..............
          110 Ton 118" Bed Amada FBD1030NT PRESS BRAKE, AMNC-PC
          $44,500
          110 Ton 118" Bed Amada FBD1030NT PRESS BRAKE, AMNC-PC
            110 TON AMADA HYDRAULIC UP-ACTING PRESS BRAKE    MODEL FBD-1030NT        S/N 10300060        NEW 2000   TONNAGE CAPACI
          25 Ton 48" Bed Accurpress 7254 PRESS BRAKE
          $24,500
          25 Ton 48" Bed Accurpress 7254 PRESS BRAKE
            4' X 25 TON ACCURPRESS HYD. PRESS BRAKE MODEL 7254         S/N 6823         NEW 2001   Capacity ............................
          Landis 4R OD GRINDER
          $RFQ
          Landis 4R OD GRINDER
           24" X 96" LANDIS 4R PLAIN OD GRINDER   SPECIFICATIONS: 24" SWING 96" BETWEEN CENTERS 30" X 4" X 12" DIAMETER GRINDING WHEEL WHEEL GUARD CAN ACCOMMODATE UPTO AN 8"
          2500Lb Cap. 12" Width Press Room Eqpt PR-122500-DC-GLGRSBD UNCOILER
          $9,950
          2500Lb Cap. 12" Width Press Room Eqpt PR-122500-DC-GLGRSBD UNCOILER
            2,500 LB. PRESS ROOM EQUIP. MOTORIZED UNCOILER MODEL PR-122500-DC-GLGRSBD           S/N 0116-002         NEW 2016  
          Okuma ES-L6 CNC LATHE, U10L, Collet Chuck, Chip Conveyor
          $RFQ
          Okuma ES-L6 CNC LATHE, U10L, Collet Chuck, Chip Conveyor
          OKUMA ES-L6 CNC TURNING CENTER NEW: 2004   VIDEO LINK https://youtu.be/9G-c3tLP7gs?si=cVSrZ0cSHdj8UIIm   SPECIFICATIONS: NO. OF CONTROLLED AXES .................... 2 SWING OVER BED .....................
          17.72" Swing 11.02" Centers Okuma ES-L6II CNC LATHE, U10L, Collet Chuck, Tailsto
          $RFQ
          17.72" Swing 11.02" Centers Okuma ES-L6II CNC LATHE, U10L, Collet Chuck, Tailsto
          OKUMA ES-L6II CNC TURNING CENTER NEW: 2006   VIDEO LINK: https://youtu.be/ERf_WAWbAho?si=SgK3F-77joAjdQFQ   SPECIFICATIONS: Swing Over Bed ............... 17.72” Swing Over Carriage .......... 13.7
          Goodway GLS-3000YS LESS THAN 100 CUT HOURS CNC LATHE, Fanuc 0i-TF, Live tool, Subspndl,
          $RFQ
          Goodway GLS-3000YS LESS THAN 100 CUT HOURS CNC LATHE, Fanuc 0i-TF, Live tool, Subspndl,
          GOODWAY (YAMA SEIKI) GLS-3000YS NEW: 12/2018            *****  UNDER 100 CUT HOURS OF USE  ***** FOR MORE INFORMATION: Call Mike at 973-497-7540
          Tsugami MO8SY-II CNC LATHE
          $RFQ
          Tsugami MO8SY-II CNC LATHE
          TSUGAMI M08SY-II MULTI-FUNCTION CNC LATHE NEW: 2023         ****** LESS THAN 300 CUT HOURS OF USE ******   EQUIPPED WITH:  - FANUC 0i-TF CNC CONTROL  - ROYAL QG65
          Okuma Crown L1060 Big Bore CNC LATHE, U10L, Royal 3J, 12" Chk., Tailstock
          $RFQ
          Okuma Crown L1060 Big Bore CNC LATHE, U10L, Royal 3J, 12" Chk., Tailstock
          OKUMA CROWN L1060 BIG BORE CNC TURNING CENTER NEW: 2000 FOR MORE INFORMATION: Call Mike at 973-497-7540
          Okuma Captain L470M - LIVE MILLING CNC LATHE, OSP P200L, 12" Chk.,
          $RFQ
          Okuma Captain L470M - LIVE MILLING CNC LATHE, OSP P200L, 12" Chk.,
          OKUMA CAPTAIN L470M/1250 CNC TURNING CENTER w/LIVE MILLING NEW: 2008   Video Link: https://youtu.be/7yOlHEfzMl0?si=pJRaB86U5N-plzNW Video Link: https://youtu.be/egQ6o1APW7E?si=cNgymysWkVb_0oNm    
          0.25" Cap. 96" Width Cincinnati 250HS8 SHEAR
          $32,500
          0.25" Cap. 96" Width Cincinnati 250HS8 SHEAR
            8' x 1/4" CINCINNATI HYDRAULIC SHEAR MODEL 250HS        S/N 51743        NEW 2002   Capacity ........................... 8 x 1/4&
          5.12" Spindle 118" X Axis Toshiba-Shibaura BFT-13C-W3 HORIZONTAL BORING MILL, #5
          $RFQ
          5.12" Spindle 118" X Axis Toshiba-Shibaura BFT-13C-W3 HORIZONTAL BORING MILL, #5
          5" TOSHIBA TABLE TYPE HORIZONTAL BORING MILL MODEL: BFT-13C-W3, S/N: 153320, NEW: 1979   SPECIFICATIONS: DIAMETER OF SPINDLE .................. 5.12" TAPER IN SPINDLE ..................... #50 DIAMET
          42" Table 3HP Spindle Alliant 42VC VERTICAL MILL, Vari-Speed, R-8, acu-Rite 2-Axis DR
          $4,950
          42" Table 3HP Spindle Alliant 42VC VERTICAL MILL, Vari-Speed, R-8, acu-Rite 2-Axis DR
          ALLIANT VERTICAL MILLING MACHINE MODEL: 42VC, S/N: 73115069, NEW: 2003   SPECIFICATIONS: TABLE SIZE ........................... 9" X 42" NUMBER OF T-SLOTS .................... 3 MAXIMUM WEIGHT OF
          9" Swing Hardinge DSM-59 SECOND OP LATHE, Vari-Speed,Turret Cross Slide, 5C Collet,
          $4,950
          9" Swing Hardinge DSM-59 SECOND OP LATHE, Vari-Speed,Turret Cross Slide, 5C Collet,
          HARDINGE SECOND OPERATION LATHE MODEL: DSM 59,  S/N DV-59-14613,  NEW 1979   SPECIFICATIONS: SPINDLE CAPACITY WITH ROUND 5C COLLETS ... 1-1/16" HEXAGON 5C COLLETS ....................... 7/8"
          Haas SL-20T CNC LATHE, Toolsetter, Tailstock, Parts Catcher
          $22,500
          Haas SL-20T CNC LATHE, Toolsetter, Tailstock, Parts Catcher
          HAAS SL-20T CNC TURNING CENTER NEW: 2004   VIDEO LINK: https://youtu.be/qIsyRh5XGRI?si=Z-KuDJX0QWx82pAN   SPECIFICATIONS: MAXIMUM SWING OVER FRONT APRON ....... 20" SWING OVER CROSS SLIDE ..........
          140 Ton 144" Bed Wysong MTH-140-144 PRESS BRAKE
          $RFQ
          140 Ton 144" Bed Wysong MTH-140-144 PRESS BRAKE
            140 Ton x 12' Wysong Hydraulic Press Brake Model MTH-140-144       S/N MT5-101      New 1991   Capacity ........................ 140 Ton x 12' Lengt
          11.8" Swing 13.4" Centers Tschudin HTG-310, 1991, RISERS, FULL AUTO CYCLE OD GRI
          $RFQ
          11.8" Swing 13.4" Centers Tschudin HTG-310, 1991, RISERS, FULL AUTO CYCLE OD GRI
          11.8" X 13.4" TSCHUDIN "SWISS" SUPER-PRECISION      UNIVERSAL CYLINDRICAL GRINDER                
          Opti-Dress E, FACTSTOR DRO, COMPLETE, REFURBISHED BY USA REP WHEEL DRESSER
          $RFQ
          Opti-Dress E, FACTSTOR DRO, COMPLETE, REFURBISHED BY USA REP WHEEL DRESSER
            "OPTI-DRESS" E FORM WHEEL DRESSER"   "REFURBISHED BY "PRECISION INT'L",  THE USA REP. FOR OPTI-DRESS"   (MADE BY PG TECHNOLOGY IN GREAT BRITIAN)  
          Haas ST-10Y CNC LATHE
          $RFQ
          Haas ST-10Y CNC LATHE
          HAAS ST-10Y CNC TURNING LATHE w/Y-AXIS, LIVE MILLING NEW: 2018   SPECIFICATIONS: SWING OVER BED 25.25" MAX CUTTING DIAMETER 12" MAX CUTTING LENGTH 16" X-AXIS TRAVEL 7.8" Y-AXIS Yes Y-AXI
          6" Width 18" Length Harig EZ-SURF, PC CNC CONTROL, CNC BY PC OR MANUAL OPS SURFA
          $RFQ
          6" Width 18" Length Harig EZ-SURF, PC CNC CONTROL, CNC BY PC OR MANUAL OPS SURFA
            6" X 18" HARIG "E-Z SURF" CNC SURFACE GRINDER   MODEL: EZ-SURF    S/N: 422-EZ     NEW: 1997   SPECIFICATIONS: MAX. GRINDING CAPACITY .....
          6" Width 18" Length Harig 618, 1995, CAST IRON BASE, SONY 1X DRO, PMC SURFACE GR
          $RFQ
          6" Width 18" Length Harig 618, 1995, CAST IRON BASE, SONY 1X DRO, PMC SURFACE GR
            6" X 18" HARIG "MADE IN USA"    HAND FEED SURFACE GRINDER,     WITH CAST IRON BASE,   AND A "SONY" 1-AXIS DRO    MOD
          6" Wheel 0.5HP Motor Baldor 500, 2017, PEDESTAL BASE, WHEELS CARBIDE GRINDER, ½ HP
          $RFQ
          6" Wheel 0.5HP Motor Baldor 500, 2017, PEDESTAL BASE, WHEELS CARBIDE GRINDER, ½ HP
            Baldor Model #500  6" Carbide  Tool Grinder   SPEC. NO: A-559-343 S/N: X1703227510 NEW: 2017     Features: 6 inch carbide tool grinder 1/2 horsepower 3600 &n
          11" Swing 18" Centers Hardinge HLVH PRECISION ENGINE LATHE, Vari-Speed,Threads,5
          $16,500
          11" Swing 18" Centers Hardinge HLVH PRECISION ENGINE LATHE, Vari-Speed,Threads,5
          HARDINGE PRECISION TOOLROOM LATHE MODEL: HLV-H, S/N: HLV-H-12602, NEW: 1987   SPECIFICATIONS: SPINDLE CONSTRUCTION ............. HARDINGE SUPER-PRECISION           &
          42" Table 1.5HP Spindle Bridgeport 2 J Vari-Speed VERTICAL MILL, Vari-Speed, Bridgepo
          $4,950
          42" Table 1.5HP Spindle Bridgeport 2 J Vari-Speed VERTICAL MILL, Vari-Speed, Bridgepo
          BRIDGEPORT VERTICAL MILLING MACHINE MODEL: 2J, S/N: 12/BR 127005, NEW: 1970   SPECIFICATIONS: TABLE SIZE ............................ 9" X 42" NUMBER OF T-SLOTS ..................... 3 LONGITUDIN
          3" Dia. Cap 15hp Motor HP Cincinnati 2 OM, S/N: 2M2H1W-428, DRESSERS, WORKREST, CENTE
          $RFQ
          3" Dia. Cap 15hp Motor HP Cincinnati 2 OM, S/N: 2M2H1W-428, DRESSERS, WORKREST, CENTE
            CINCINNATI No. 2 "OM" CENTERLESS GRINDER      (THIS MACHINE WAS MADE IN THE USA!)      S/N: 2M2H1W-428          DIAMETER CAP
          3" Dia. Cap 15hp Motor HP Cincinnati 2 0M, S/N: 2M2H5A-119, HYD. DRESSERS CENTERLESS
          $RFQ
          3" Dia. Cap 15hp Motor HP Cincinnati 2 0M, S/N: 2M2H5A-119, HYD. DRESSERS CENTERLESS
            CINCINNATI No. 2 "OM" CENTERLESS GRINDER      (THIS MACHINE WAS MADE IN THE USA!)      S/N: 2M2H5A-119         DIAMETER CAPACITY,
          Tsugami S206 CNC SWISS TYPE LATHE
          $RFQ
          Tsugami S206 CNC SWISS TYPE LATHE
          TSUGAMI S206 SWISS TYPE CNC LATHE NEW: 2012   General Specifications from Brochure: Control: Fanuc 31iTB No. of Controllable Axes: 8 (X1, Z1, Y1, X2, Y2, Z2, C1, C2) Max Bar Diameter: 20mm (3/4") Max Ma
          32" Table 1HP Spindle Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, R-8
          $2,450
          32" Table 1HP Spindle Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, R-8
          9" X 32" BRIDGEPORT VERTICAL MILLING MACHINE MODEL: J-HEAD, S/N: 12/BR 93757, NEW: 1966   SPECIFICATIONS: TABLE SIZE ........................ 9" X 32"       &nbs
          48" Table 2HP Spindle Bridgeport SERIES I VERTICAL MILL, Vari-Speed Head, R-8, B'port
          $6,500
          48" Table 2HP Spindle Bridgeport SERIES I VERTICAL MILL, Vari-Speed Head, R-8, B'port
          BRIDGEPORT VERTICAL MILLING MACHINE MODEL: SERIES I, S/N: 12/BR 230323, NEW: 1983   SPECIFICATIONS: TABLE SIZE .............................. 9" X 48" NUMBER OF T-SLOTS ....................... 3 L
          36" Width 24" Height Trinco 36/BP, WITH DUST COLLECTOR BLAST CLEANER, 36"W
          $RFQ
          36" Width 24" Height Trinco 36/BP, WITH DUST COLLECTOR BLAST CLEANER, 36"W
             Trinco Model 36/BP    Dry Blast Cabinet  with BP Dust Collector   36”W x 24”D x 23”H Tub Machine S/N: 41068-4   Cabinet Dimensions:  38&quo
          18" Swing 100" Centers Mazak ENGINE LATHE, Inch/Metric,Taper,3" Hole,34 Jaw
          $14,500
          18" Swing 100" Centers Mazak ENGINE LATHE, Inch/Metric,Taper,3" Hole,34 Jaw
          18"/25" x 100" MAZAK GAP BED LATHE S/N: 33833W, NEW: 1980'S   SPECIFICATIONS: SWING OVER BED WAYS ................. 18" SWING IN REMOVABLE GAP .............. 25-1/8" SWING OVER CROSS S
          Kuraki TAILSTOCK for KBT-1003 BORING MILL TOOLING, 49" Carrier Travel
          $8,500
          Kuraki TAILSTOCK for KBT-1003 BORING MILL TOOLING, 49" Carrier Travel
              KURAKI TAILSTOCK MODEL: KBT 1003W   CARRIER VERTTICAL TRAVEL 49"   TAILSTOCK WAS MADE TO FIT A KURAKI TABLE TYPE BORING MILL MODEL: KBT 1003W   FOR MORE INFORMATION: Call
          1500Lb Cap. ALLFAB 150-4 WELDING POSITIONER
          $4,950
          1500Lb Cap. ALLFAB 150-4 WELDING POSITIONER
            1,500 LB. ALL FAB WELDING POSITIONER MODEL 150-4   LOAD CAPACITY ................. 1,500 LBS. VERTICAL 90 DEG. @ 4" CENTER OF GRAVITY LOAD CAPACITY ................. 1,500 LBS. FLAT HORIZ. TABLE DI
          1" Dia. 12 Length LNS EXPRESS 226 BAR FEED
          $4,950
          1" Dia. 12 Length LNS EXPRESS 226 BAR FEED
          LNS EXPRESS 226 MAAGAZINE BARFEED NEW: 2000     FOR MORE INFORMATION: Call Mike at 973-497-7540
          15" Swing 0.5HP Spindle Alceco AICO-144B DRILL PRESS, 5 Speed, Drill Chuck, Single Ph
          $250
          15" Swing 0.5HP Spindle Alceco AICO-144B DRILL PRESS, 5 Speed, Drill Chuck, Single Ph
          Alceco AICO-144B FOR MORE INFORMATION: Call David at 973-497-7570
          Duro-Dyne LF PINSPOTTER ARC WELDER
          $350
          Duro-Dyne LF PINSPOTTER ARC WELDER
            DURO-DYNE HAND HELD PIN SPOTTER MODEL LF        VOLTAGE ............... 110     FOR MORE INFORMATION: Call Mike at 973-497-7540
          Duro-Dyne PBFS-14 PIN SPOTTER ARC WELDER
          $1,950
          Duro-Dyne PBFS-14 PIN SPOTTER ARC WELDER
            DURO-DYNE PIN SPOTTER WELDER MODEL PBFS14      S/N 53888   VOLTAGE ............... 220 V / Single Ph KVA ................... 15 CAPACITY ...2" PINS.... 18 GA   ON WH
          57 AMPS Current EDM CT300, CNC, 1998, MADE IN JAPAN, EDM HOLE DRILLER, HIGH-PRECISION,
          $RFQ
          57 AMPS Current EDM CT300, CNC, 1998, MADE IN JAPAN, EDM HOLE DRILLER, HIGH-PRECISION,
                  CURRENT (Made in Japan) "High Accuracy" CNC EDM Hole Driller   Model: CT300       S/N: 84120      Year
          Tin Knocker 30 ROLL FORMER
          $495
          Tin Knocker 30 ROLL FORMER
            TIN KNOCKER NO. 30 CLEAT BENDER NEW 2004   BENDING LENGTH ......................... 30" CAPACITY ......(MILD STEEL)............. 20 GA. CLEAT DEPTH ............................ .500"  
          Engel PSD3 ROLL FORMER
          $2,450
          Engel PSD3 ROLL FORMER
            22 GAUGE ENGEL ROLLFORMER MODEL PSD3     S/N 481261 FOR MORE INFORMATION: Call Rick at 973-497-7560
          Sonic ED2000 ULTRASONIC WELDER
          $1,950
          Sonic ED2000 ULTRASONIC WELDER
          SONIC & MATERIALS ED2000 ULTRASONIC WELDER FOR MORE INFORMATION: Call Mike at 973-497-7540
          Branson 8700 ULTRASONIC WELDER
          $1,950
          Branson 8700 ULTRASONIC WELDER
          BRANSON 8700 ULTRASONIC WELDER FOR MORE INFORMATION: Call Mike at 973-497-7540
          Niagara 2 Hand Shear SHEET METAL SHEAR
          $750
          Niagara 2 Hand Shear SHEET METAL SHEAR
            HEAVY DUTY NIAGARA HAND SHEAR FOR MORE INFORMATION: Call Rick at 973-497-7560
          1998 - 2000 Watt Amada Altair LC-3015-B3-EX CO2 CNC Laser *Low Hours*
          $RFQ
          1998 - 2000 Watt Amada Altair LC-3015-B3-EX CO2 CNC Laser *Low Hours*
          Wattage 2000 Watts Max Sheet Size 5' x 10' Max Material Weight 1534 lbs. X Axis Travel 120" Y Axis Travel 61" Z Axis Travel 11.8" Weight (approx) 26,000 lbs. Overall Dimensions (approx.) 34&
          • Wattage: 2000W
          • X axis travel: 10'
            Torit SDF-6 1600 CFM Dust Collector
            $RFQ
            Torit SDF-6 1600 CFM Dust Collector
            CFM 1600 Power 208 volts No. of Cartridges 6
            2008 - 143 Ton Amada HDS-1303NT CNC Press Brake
            $RFQ
            2008 - 143 Ton Amada HDS-1303NT CNC Press Brake
            Capacity 143 US tons Max Bending Length 126.8" Distance between Housings 106.3" Max. Stroke Length 7.87" Ram Speed 472 IPM (approach & return) Bending Speed 47 IPM Open Height 19.7" (15.75&q
            • Tonnage: 143T
              2018 - 193 Ton x 14' Ermak Speed Bend CNC Press Brake
              $RFQ
              2018 - 193 Ton x 14' Ermak Speed Bend CNC Press Brake
              Capacity 193 Tons Overall Bending Length 168" Distance Between Housings 148.82 Y Rapid Speed 7.09" /sec Y Working Speed 0.49" /sec Y Return Speed 7.48" /sec X Axis Travel 31.5" X Axis Spee
              • Tonnage: 193T
                Mazak Smart 530C CNC Vert Machining Cntr, 51.18" x 21.65" tbl, CA
                $RFQ
                Mazak Smart 530C CNC Vert Machining Cntr, 51.18" x 21.65" tbl, CA
                MAZAK SMART 530C CNC VERTICAL MACHINING CENTER Model VCS 530C, S/N 233122, New 2012 Stock # Q12019 EQUIPPED WITH: Mazak Mazatrol Smart CNC Control, 4th-Axis Prewire with Drive, 51.18" x 21.65" Table, 1200
                • X axis: 41.34"
                • Y axis: 20.87"
                  100 Ton x 10' Accurpress 710010 Hydraulic Press Brake, 2-Axis Back Gaug
                  $RFQ
                  100 Ton x 10' Accurpress 710010 Hydraulic Press Brake, 2-Axis Back Gaug
                  100 TON x 10' ACCURPRESS 710010 HYDRAULIC PRESS BRAKE Model 710010, S/N 4206, New 1997 Stock # Q12103 EQUIPPED WITH: Accurpress CNC Gauge System Control with 2-Axis Backgauge, ETS Pendant, Foot Pedal, Light Cur
                  • Tonnage: 100T
                    60T Minster #6 Single Point OBI Flywheel Press, 24" x14.5" Ram, 3
                    $RFQ
                    60T Minster #6 Single Point OBI Flywheel Press, 24" x14.5" Ram, 3
                    60 TON MINSTER SINGLE POINT OBI FLYWHEEL PRESS Model #6, S/N 101-6-22050, New 1975 Stock # Q12043 EQUIPPED WITH: Inch / Single / Continuous Modes, Dual Palm Buttons (T Stand), Air Clutch and Brake, Air Counterbalan
                    • Tonnage: 60T
                    • Stroke: 6"
                      Categories:
                      Condition:
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>