buy & sell, new & used machinery, machine tools & equipment

<Prev | 731 | 732 | 733 | 734 | 735 | 736 | 737 | 738 | 739 | 740 | Next>
Refine: Viewing 14761 - 14780 of 19759 matches
Sort by:
Items Per Page:  20  |  50 |  100
1981 - DO-ALL MODEL C-1220A AUTOMATIC HORIZONTAL BANDSAW, 12″ X 20″
$RFQ
1981 - DO-ALL MODEL C-1220A AUTOMATIC HORIZONTAL BANDSAW, 12″ X 20″
SPECIFICATIONS RECTANGLE CAPACITY: 12″ X 20″ ROUND CAPACITY: 16″ BLADE: 1.5″ X .050″ X 186″ DRIVE: 10 HP SPEED: 85-450 FPM INDEX: 0-24” PULL-UP FORCE: 3,300 LBS GENERAL FLOOR AREA: 139” X 85” NET WEIGHT, APPROX: 5,800 L
  • Width capacity: 20"
  • Height capacity: 12"
    NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
    $RFQ
    NEW SHARP MODEL LMV 50 VERTICAL TURRET MILLING MACHINE, 9″ X 50″
    SPECIFICATIONS TABLE WORKING SURFACE: 9″ X 50″ T SLOTS (3): 5/8″ LOAD CAPACITY: 660 LBS CAPACITY TABLE TRAVEL (X-AXIS): 36″ SADDLE TRAVEL (Y-AXIS): 12″ RAM TRAVEL: 12″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 16″ SPINDLE
    • Table width: 9"
    • Table length: 50"
      NEW- SCOTCHMAN 50514CM IRONWORKER - 50 TON
      $RFQ
      NEW- SCOTCHMAN 50514CM IRONWORKER - 50 TON
      SPECIFICATIONS (RATED ON 36 MILD STEEL) PUNCHING CAPACITY: 50 TON 1-1/4″ IN 1/2″ 13/16″ IN 3/4″ THROAT DEPTH: 6″ FLAT BAR SHEAR: 14″ LENGTH 3/4″ X 4″ 1/2″ X 8″ 3/8″ X 10″ 1/4″ X 14″ ANGLE SHEAR (90 DEG.): 4″ X 4″ X 3/8″
      • Angle L1: 4"
      • Angle L2: 4"
        NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
        $RFQ
        NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
        SPECIFICATIONS MAXIMUM SHEARING CAPACITY, MILD STEEL: 16 GA MAXIMUM SHEARING CAPACITY, STAINLESS STEEL: 20 GA MAXIMUM CUTTING LENGTH: 52-1/4″ BACK GAUGE RANGE: 30″ FRONT GAUGE RANGE: 37″ GENERAL FLOOR SPACE, GAUGES IN P
        • Maximum thickness: 16Ga
        • Cutting length: 52"
          NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
          $RFQ
          NEW - TENNSMITH 52 FOOT SQUARING SHEAR - 52" X 16 GA
          SPECIFICATIONS MAXIMUM SHEARING CAPACITY, MILD STEEL: 16 GA MAXIMUM SHEARING CAPACITY, STAINLESS STEEL: 20 GA MAXIMUM CUTTING LENGTH: 52-1/4″ BACK GAUGE RANGE: 30″ FRONT GAUGE RANGE: 37″ GENERAL FLOOR SPACE, GAUGES IN P
          • Maximum thickness: 62Ga
          • Cutting length: 52"
            3000 - SCOTCHMAN BEWO CP0350LT COLD SAW - 14"
            $RFQ
            3000 - SCOTCHMAN BEWO CP0350LT COLD SAW - 14"
            SPECIFICATIONS CUTTING SPEEDS: SPEED 1 / SPEED 2: 22 / 44 RPM MOTOR RATE: 3 HP MAXIMUM BLADE DIAMETER: 14″ ARBOR BORE: 1-9/16″ PIN SPACING: 4 / 12 / 64 CAPACITIES WITH MAXIMUM DIAMETER BLADES TUBING 90° ROUND: 4-71/2″
            • Blade diameter: 14"
              NEW - HYD-MECH S-20 SERIES III PIVOT BANDSAW - 13" X 18"
              $RFQ
              NEW - HYD-MECH S-20 SERIES III PIVOT BANDSAW - 13" X 18"
              SPECIFICATIONS CUTTING CAPACITY AT 90 DEGREES RECTANGULAR: 13″ X 18″ ROUND: 13″ DIAMETER CUTTING CAPACITY AT 45 DEGREES RECTANGULAR: 13″ X 10.75″ ROUND: 12″ DIAMETER CUTTING CAPACITY AT 30 DEGREES RECTANGULAR: 13″ X 7
              • Width capacity: 18"
              • Height capacity: 13"
                NEW - MARVEL SPARTAN PA360EPC HORZ BANDSAW - 14" X 14"
                $RFQ
                NEW - MARVEL SPARTAN PA360EPC HORZ BANDSAW - 14" X 14"
                SPECIFICATIONS CUTTING CAPACITIES SQUARE: 14” X 14” ROUND: 14” BLADE: 1-1/4” X .042” X 14’6” AUTOMATIC BAR FEED MAX LOAD CAPACITY: 6,250 LBS AUTOMATIC BAR FEED MAX TRAVEL 1 INDEX: 20″ AUTOMATIC BAR FEED MAX INDEXES, MUL
                • Width capacity: 14"
                • Height capacity: 14"
                  2000 - CHIP BLASTER CV36-1000 COOLANT SYSTEM - 1000 PSI
                  $RFQ
                  2000 - CHIP BLASTER CV36-1000 COOLANT SYSTEM - 1000 PSI
                  SPECIFICATIONS MAXIMUM PRESSURE: 1000 PSI DELIVERY VOLUME: 3 – 36 GPM COOLANT TANK VOLUME: 240 GALLON (DUAL FILTER) HIGH PRESSURE PUMP: 30 HP STANDARD FILTER ELEMENT: 5 MICRON HIGH PRESSURE OUTLETS: 2 APPROXIMATE SOUND L
                  • Tank capacity: 240Gal
                  • Motor: 30HP
                    HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                    $RFQ
                    HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                    SPECIFICATIONS OSCILLATING WHEELS (2): 5-1/2” TABLE: 13” X 5-1/2” GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH MITERING GAUGE
                    HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                    $RFQ
                    HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                    SPECIFICATIONS OSCILLATING WHEELS (2): 5-1/2” TABLE: 13” X 5-1/2” GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH MITERING GAUGE
                    USED LOCKFORMER MODEL L-810 ROLLFORMER, 10 STAND X 1-3/8″ X 12″
                    $RFQ
                    USED LOCKFORMER MODEL L-810 ROLLFORMER, 10 STAND X 1-3/8″ X 12″
                    SPECIFICATIONS STANDS: 10 ROLL SHAFT DIAMETER: 1-3/8″ KEYWAY SIZE: 1/4″ ROLL SPACE: 12″ CENTER, 3-1/2″ OUTSIDE HORIZONTAL CENTERS: 8″ VERTICAL CENTER: 5″ BASE TO LOWER SHAFT: 7-1/2″ LINE DIRECTION: RIGHT TO LEFT GENERAL
                    • # Stands: #10
                    • Roll diameter: 1.375"
                      NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL WITH AUTO LUBE PUMP, 10″ X 50″
                      $RFQ
                      NEW SHARP MODEL TMV HEAVY DUTY VERTICAL MILL WITH AUTO LUBE PUMP, 10″ X 50″
                      SPECIFICATIONS TABLE WORKING SURFACE: 10″ X 50″ T-SLOTS (3): 5/8″ CAPACITY TABLE TRAVEL (X-AXIS): 35″ SADDLE TRAVEL (Y-AXIS): 16.3″ RAM TRAVEL: 18.5″ QUILL TRAVEL (Z-AXIS): 5″ KNEE TRAVEL: 15.3″ THROAT DISTANCE (MIN –
                      • Table width: 10"
                      • Table length: 50"
                        2001 - KAO MING KMR-1100S RADIAL DRILL - 4' X 11"
                        $RFQ
                        2001 - KAO MING KMR-1100S RADIAL DRILL - 4' X 11"
                        SPECIFICATIONS DISTANCE FROM SPINDLE CENTER AND COLUMN CENTER: 19-7/8” – 49-1/4” DISTANCE BETWEEN SPINDLE CENTER AND COLUMN FACE: 14” – 43-5/16” DISTANCE OF SPINDLE TO BASE SURFACE: 13-9/16” – 49-13/16” COLUMN DIAMETER:
                        • Arm length: 4'
                        • Column diameter: 11"
                          1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                          $RFQ
                          1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                          SPECIFICATIONS TABLE WORKING SURFACE: 40.1″ X 15.7″ TABLE T-SLOTS: 3 X .71″ ON 4.92″ CENTERS TABLE LOAD W/UNIFORM DISTRIBUTION: 1,100 LBS SPINDLE MOTOR HORSEPOWER, (30 MINUTES): 10 HP HORSEPOWER, (CONTINUOUS): 7.5 HP T
                          • X axis: 30"
                          • Y axis: 18"
                            NEW - KINGSTON MODEL HD-2290, 4″ LARGE BORE HIGH SPEED PRECISION GAP BED LATHE, 22″ X 90″
                            $RFQ
                            NEW - KINGSTON MODEL HD-2290, 4″ LARGE BORE HIGH SPEED PRECISION GAP BED LATHE, 22″ X 90″
                            SPECIFICATIONS CAPACITY SWING OVER BED: 22″ SWING OVER CROSS SLIDE: 13″ SWING IN GAP: 31-3/8″ GAP WIDTH IN FRONT OF FACE PLATE: 10-5/8″ DISTANCE BETWEEN CENTERS: 90″ WIDTH OF BED: 15-3/4″ MAXIMUM TRAVEL OF COMPOUND: 9-1
                            • Swing: 22"
                            • Centers: 90"
                              USED GIDDINGS & LEWIS CHIPMASTER RADIAL DRILL - 4' X 9"
                              $RFQ
                              USED GIDDINGS & LEWIS CHIPMASTER RADIAL DRILL - 4' X 9"
                              SPECIFICATIONS DISTANCE SPINDLE TO COLUMN FACE: 48″ COLUMN DIAMETER: 9″ SPINDLE SPEEDS (9): 60-1200 RPM SPINDLE TAPER: 4 MT FEEDS: .004, .008, .014, .020 GENERAL ELECTRICS: 208 VOLTS, 3 PH, 60 CYC DIMENSIONS: 92″ L-R, 3
                              • Arm length: 4'
                              • Column diameter: 9"
                                USED JONES & LAMSON MODEL FC-14 OPTICAL COMPARATOR, 14"
                                $RFQ
                                USED JONES & LAMSON MODEL FC-14 OPTICAL COMPARATOR, 14"
                                SPECIFICATIONS SCREEN DIAMETER: 14″ C/L GLASS CHART WORK TABLE: 6″ X 30″ HARD CHROMIUM PLATED MEASURING CAPACITY LONGITUDINAL TABLE TRAVEL: 8″ MANUAL TRAVEL W/ ACU-RITE GLASS SCALE (.001mm/.00005″ RESOLUTION) VERTICAL T
                                • Screen diameter: 14"
                                  1987 - DO-ALL C-260A AUTOMATIC HORIZONTAL POWER BANDSAW - 10-1/4" X 12"
                                  $RFQ
                                  1987 - DO-ALL C-260A AUTOMATIC HORIZONTAL POWER BANDSAW - 10-1/4" X 12"
                                  SPECIFICATIONS CUTTING CAPACITIES RECTANGULAR: 10-1/4″ X 12″ ROUND : 10-1/4″ BLADE: 1-1/4” X 138″ X .042” VARIABLE SPEED DRIVE MOTOR: 5 HP SHUTTLE VISE STROKE: 24” GENERAL FLOOR SPACE: 7’ X 6’ X 4’ NET WEIGHT: 4,200 LBS
                                  • Width capacity: 12"
                                  • Height capacity: 10.25"
                                    HARDINGE 6-POSITION BED TURRET FOR DSM-59
                                    $RFQ
                                    HARDINGE 6-POSITION BED TURRET FOR DSM-59
                                    SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
                                    Categories:
                                    Condition:
                                    Manufacturer:
                                    Location:
                                    Price:
                                    •  to 
                                    <Prev | 731 | 732 | 733 | 734 | 735 | 736 | 737 | 738 | 739 | 740 | Next>