buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Hardinge

Hardinge Machine Tools For Sale

85 new & used Hardinge machine tools items for sale
1 | 2
Refine: Viewing 51 - 85 of 85 matches
Sort by:
Items Per Page:  20 |  50  |  100
1972 Hardinge HLV-H Precision Toolroom Lathe, 11" x 18"
$RFQ
1972 Hardinge HLV-H Precision Toolroom Lathe, 11" x 18"
SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP
  • Swing: 11"
  • Centers: 18"
    HARDINGE
    $RFQ
    HARDINGE
    HARDINGE
    Hardinge Conquest T42
    $RFQ
    Hardinge Conquest T42
    Catalog Specifications: Max Swing Over Bed - 19.5" Cross Travel (X-Axis) - 5.45" Longitudinal Travel (Y-Axis) - 13.65" Rapid Traverse Rate (X) - 472 ipm Rapid Traverse Rate (Z) - 620 ipm Turret Tool Positions -
    Hardinge Bridgeport VMC-1000XP3
    $RFQ
    Hardinge Bridgeport VMC-1000XP3
    Hardinge Bridgeport VMC-1000XP4
    NEW! SHARP 1118H TOOLROOM PRECISION LATHE
    $33,300
    NEW! SHARP 1118H TOOLROOM PRECISION LATHE
    Make: Sharp Model #: 1118H Condition: NEW The Sharp 1118H Toolroom Lathe is built with alloy steel bed ways for achieving high precision machining. This Toolroom lathe is equipped with 5C collet closure, ideal for m
    • Swing: 11"
    • Centers: 18"
      Hardinge Conquest 42 (1992)
      $RFQ
      Hardinge Conquest 42 (1992)
      CNC Control: Fanuc 0-T Spindle: Speeds: 50 - 5000 RPM Thru Hole: 1 - 7/8" Turret Index Time: 0.2 Sec.
      • Swing: 19.5"
      • Centers: 17.5"
        Hardinge VMC 1000 II yr2001
        $RFQ
        Hardinge VMC 1000 II yr2001
        this is a hardinge vmc 1000 II yr 2001 specs are posted below and I have videos of operation if needed buyer assumes transportation cost. I will load the machine on the truck. the machine works perfect and has recently b
        • X axis: 3"
        • Y axis: 3"
          Hardinge Vertical Machining Center 1000 II Mill (2000)
          $RFQ
          Hardinge Vertical Machining Center 1000 II Mill (2000)
          SPECIFICATIONS: 4-Axis CNC, 40" X, 20" Y, 20" Z, Fanuc OMDX-AXIS LONGITUDINAL: 40.16" Y-AXIS CROSS: 20.08" Z-AXIS VERTICAL: 20.08" SPINDLE NOSE TO TABLE SURFACE: 6.1 TO 26.1" TABLE FRONT EDGE TO DOOR: 7.23" SPINDLE
          11" X 24" HARDINGE HLV-EM ENGINE LATHE: STOCK #60050
          $RFQ
          11" X 24" HARDINGE HLV-EM ENGINE LATHE: STOCK #60050
          SERIAL .............................. 7392 5 MODEL ............................... HLV-EM SWING OVER BED ...................... 11" SWING OVER CARRIAGE ................. 9" SWING OVER CROSS SLIDE ............
          11" x 20" HARDINGE MODEL #HLV-EM ENGINE LATHE: STOCK #59679
          $RFQ
          11" x 20" HARDINGE MODEL #HLV-EM ENGINE LATHE: STOCK #59679
          SERIAL ............................ 8353-T MODEL ............................. HLV-ME SWING OVER WAYS ................... 11" SWING OVER CROSS SLIDE ............ 6" DISTANCE BETWEEN CENTERS .......... 20"
          1977 HARDINGE MODEL HC CHUCKER, 9"
          $RFQ
          1977 HARDINGE MODEL HC CHUCKER, 9"
          SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16" WITH HEXAGON 5C HARDINGE COLLETS: 7/8" WITH SQUARE 5C HARDINGE COLLETS: 3/
          HARDINGE 7 VERT CUT-OFF SLIDE
          $RFQ
          HARDINGE 7 VERT CUT-OFF SLIDE
          SPECIFICATIONS FOR HARDINGE HC CHUCKERS
          HARDINGE 6-POSITION BED TURRET FOR DSM-59
          $RFQ
          HARDINGE 6-POSITION BED TURRET FOR DSM-59
          SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
          1969 - HARDINGE HSL-59 SPEED LATHE - 9"
          $RFQ
          1969 - HARDINGE HSL-59 SPEED LATHE - 9"
          SPECIFICATIONS TAPERED SPINDLE SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16″ WITH HEXAGON 5C COLLETS: 7/8″ WITH SQUARE 5C COLLETS: 3/4″ WITH STEP CHUCKS: 6″ WITH JAW CHUCKS: 5″ WITH EXPANDING COLLETS: 3″ SPINDLE SPE
          • Swing: 9"
          • Centers: 10"
            (2) HARDINGE TURRET TOP PLATES - 3/8"
            $RFQ
            (2) HARDINGE TURRET TOP PLATES - 3/8"
            QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
            (2) HARDINGE TURRET TOP PLATES - 3/8"
            $RFQ
            (2) HARDINGE TURRET TOP PLATES - 3/8"
            QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
            (2) HARDINGE TURRET TOP PLATES - 3/8"
            $RFQ
            (2) HARDINGE TURRET TOP PLATES - 3/8"
            QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
            1962 - HARDINGE DSM-59R TURRET LATHE - 1-1/16"
            $RFQ
            1962 - HARDINGE DSM-59R TURRET LATHE - 1-1/16"
            SPECIFICATIONS SPINDLE SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING SPINDLE TYPE: HARDINGE BS #21 10 SPINDLE SPEEDS: 450 TO 4000 RPM CAPACITY BED LENGTH (FROM SPINDLE FACE): 29″ SWING OVER BED: 9″ COOLANT SUM
            1966 - HARDINGE HC CHUCKER - 9"
            $RFQ
            1966 - HARDINGE HC CHUCKER - 9"
            SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16″ WITH HEXAGON 5C HARDINGE COLLETS: 7/8″ WITH SQUARE 5C HARDINGE COLLETS: 3/4″ WITH STEP CHUCKS
            • Swing: 9"
            • Centers: 13"
              1959 - HARDINGE HC CHUCKER - 9"
              $RFQ
              1959 - HARDINGE HC CHUCKER - 9"
              SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16″ WITH HEXAGON 5C HARDINGE COLLETS: 7/8″ WITH SQUARE 5C HARDINGE COLLETS: 3/4″ WITH STEP CHUCKS
              • Swing: 9"
              • Centers: 13"
                1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
                $RFQ
                1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
                SPECIFICATIONS SPINDLE SPINDLE CONFIGURATION: ANSI A2-5″ HOLE THROUGH SPINDLE: 1.875″ 16C COLLET CAPACITY: 1-5/8″ SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP CAPACITY MA
                • Swing: 14"
                • Centers: 12"
                  HARDINGE 6 POSITION BED TURRET - FOR DV-59
                  $RFQ
                  HARDINGE 6 POSITION BED TURRET - FOR DV-59
                  SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
                  1950 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                  $RFQ
                  1950 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                  SPECIFICATIONS SPINDLE SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING SPINDLE CAPACITY W/ROUND 5C COLLETS: 1-1/16″ VARIABLE SPINDLE SPEEDS: 230 TO 3,500 RPM CAPACITY BED LENGTH (FROM SPINDLE FACE): 36″ SWING OVE
                  • Swing: 9"
                  • Centers: 17"
                    1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                    $RFQ
                    1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                    SPECIFICATIONS SPINDLE CAPACITY / 5C ROUND: 1-1/16″ BED LENGTH: 36″ SWING OVER BED: 9″ SPINDLE SPEEDS: 230 TO 3,500 RPM (8 STEPS) GENERAL DIMENSIONS: 67″ L-R X 32″ F-B X 57″ H WEIGHT, APPROX 1,550 LBS ELECTRICS: 220 VO
                    • Swing: 9"
                    • Centers: 36"
                      (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
                      $RFQ
                      (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
                      FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                      HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                      $RFQ
                      HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                      SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                      HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                      $RFQ
                      HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                      SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                      HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
                      $RFQ
                      HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
                      SPECIFICATIONS DIAMETER: 6″ HOLE: 1.5″
                      HARDINGE A SQUARE PRODUCTION TOOLPOST
                      $RFQ
                      HARDINGE A SQUARE PRODUCTION TOOLPOST
                      USED HARDINGE MODEL A SQUARE PRODUCTION TOOLPOST
                      1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                      $RFQ
                      1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                      SPECIFICATIONS MAX. CAPACITY: 3/4″ X 12′ FEATURES ROTATING MULTI TUBE DESIGN WITH 4 TUBES
                      • Maximum bar diameter: 0.75"
                      • Maximum bar length: 12'
                        Hardinge DSM 59 -Lathe
                        $3,200
                        Hardinge DSM 59 -Lathe
                        Specifications: HP 1 Volt 440 PH
                        Hardinge, DV-59 - Lathe
                        $1,250
                        Hardinge, DV-59 - Lathe
                        Specifications: HP1 Volt 220 PH3
                        HARDINGE CHNC 1 PRECISION CNC LATHE
                        $RFQ
                        HARDINGE CHNC 1 PRECISION CNC LATHE
                        HARDINGE CHNC 1 PRECISION CNC LATHE MANUFACTURED 1987 RACO Stock Number R017000 SWING OVER BED ------------------------------ 14" MAXIMUM TURNING DIAMETER ------------------ 8" MAXIMUM FIXTURE DIAMETER
                        • Swing: 14"
                          HARDINGE MODEL DV-59 LATHE: STOCK #54467
                          $RFQ
                          HARDINGE MODEL DV-59 LATHE: STOCK #54467
                          SERIAL ....................... DV-59-13245 MODEL ........................ DV-59 SWING OVER BED ............... 9" SWING OVER CROSS SLIDE ....... 6" DISTANCE BETWEEN CENTER ...... 17" SPINDLE SPEEDS .......
                          12" x 14" HARDINGE MODEL #HC CHUCKING LATHE: STOCK #18414
                          $RFQ
                          12" x 14" HARDINGE MODEL #HC CHUCKING LATHE: STOCK #18414
                          SERIAL ................................ 12354 MODEL ................................. HC SWING OVER BED ........................ 12" SWING OVER CROSS SLIDE ................ 6" DISTANCE FACE OF SPINDLE TO TURR
                          Categories:
                          Condition:
                          Manufacturer:
                          • X Hardinge (85)
                          Location:
                          Price:
                          •  to 
                          1 | 2