buy & sell, new & used machinery, machine tools & equipment

<Prev | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | Next>
Refine: Viewing 12601 - 12700 of 20829 matches
Sort by:
Items Per Page:  20 |  50 |  100
EDWARDS ED9-HAT5000 2 in. Radius Roller
$RFQ
EDWARDS ED9-HAT5000 2 in. Radius Roller
CALL 386-304-3720 FOR AVAILABILITY FEATURES: *Radius Roller is another essential quick-connect hydraulic tool. Plug it into your Edwards Ironworker with the Hydraulic Accessory Pack or power it separately with an Edw
1969 Cleaver-Brooks, CB-760-150, 150 psi
$RFQ
1969 Cleaver-Brooks, CB-760-150, 150 psi
1969 Cleaver-Brooks, CB-760-150, 150 psi Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled
1994 Cleaver-Brooks, CB-200-150, 150 psi
$RFQ
1994 Cleaver-Brooks, CB-200-150, 150 psi
1994 Cleaver-Brooks, CB-200-150, 150 psi Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled
325 TON X 20' WYSONG HYDRAULIC PRESS BRAKE
$RFQ
325 TON X 20' WYSONG HYDRAULIC PRESS BRAKE
325 TON CAPACITY 20' OVERALL 14'6" BETWEEN HOUSINGS 10" THROAT 8" WIDE BED RAM MILLED FOR ANGLES HURCO 7 CNC BACK GAUGE 2- SETS OF PALM BUTTONS AND ELECTRIC FOOT SWITCH
  • Tonnage: 325T
    Ermak 120 Ton x 8' (2011)
    $RFQ
    Ermak 120 Ton x 8' (2011)
    120 Ton x 8' Installed Axis Y1 Y2 X R Z1 Z2 Graphic Control With Offline Programming CNC Crowning Table 2 Front Sliding Support Arms on Ways Rear Photo Light Curtain 31.5 " Servo Driven Back Gauge European To
    • Tonnage: 120T
      Clausing Colchester 15 Metal Lathe
      $RFQ
      Clausing Colchester 15 Metal Lathe
      Swing Over Bed and Saddle Wings: 15-1/4" Swing Over Cross Slide: 9-1/2" Bar Capacity Thru Spindle: 2-1/8" Distance Between Centers: 50" Spindle Nose: 6" D1 Camlock Spindle Speeds: (16) 25 to 20
      • Swing: 15.25"
      • Centers: 50"
        Takisawa EX-122 (2005)
        $RFQ
        Takisawa EX-122 (2005)
        Specifications: Maximum Swing:............................................... 36" Swing Over Carriage:........................................ 22.2" Maximum Turning Diameter:................... 24.02" Maximum Shaft
        • Swing: 36"
        • Centers: 71"
          OKUMA MX-55VA (1998)
          $RFQ
          OKUMA MX-55VA (1998)
          EQUIPPED WITH: OSP 700M CNC Control, RS-232 Port, Manual Pulse Generator, 20 Position Automatic Tool Changer, Full Enclosure, Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Table Working Surface..
          • X axis: 41"
          • Y axis: 22"
            OKK PCV-55
            $RFQ
            OKK PCV-55
            TRAVELS (X)............... 40" TRAVELS (Y)............... 22" TRAVELS (Z)............... 21" TABLE SIZE................ 48" X 22" SPINDLE SPEED............. 13,000 RPM SPINDLE TAPER............. CT-50 SPINDLE MOTOR
            • X axis: 40"
            • Y axis: 22"
              OKK MCV-550 (1998)
              $RFQ
              OKK MCV-550 (1998)
              TRAVEL (X)................ 41.34" TRAVEL (Y)................ 21.65" TRAVEL (Z)................ 22.05" TABLE SIZE................ 51" X 22" MAX TABLE CAP............. 3,300 LBS SPINDLE MOTOR............. 25 - 4000 RP
              • X axis: 41"
              • Y axis: 21"
                OKK VM5-II
                $RFQ
                OKK VM5-II
                Table size 41"x22" Max. Table Load 1760 Lbs Spindle Nose to Table Top 5.9"-25.9" X Axis Travel 40.15" Y Axis Travel 20.08" Z Axis Travel 20.08" Rapid traverse rate X, Y Axes 1181 IPM Rapid traverse rate Z Axis 787
                • X axis: 40"
                • Y axis: 20"
                  Monarch VMC-150 (1989)
                  $RFQ
                  Monarch VMC-150 (1989)
                  CAPACITIES: X-AXIS TRAVEL, TABLE BACK & FORTH ...... 50" Y-AXIS TRAVEL, SADDLE IN & OUT ......... 36" Z-AXIS TRAVEL, QUILL UP & DOWN ......... 10" W-AXIS TRAVEL, SLIDING HEAD UP-DOWN .... 23" SPINDLE SPEED, MAX ......
                  • X axis: 50"
                  • Y axis: 36"
                    Doosan VM 3016LHs (2008)
                    $RFQ
                    Doosan VM 3016LHs (2008)
                    STANDARD FEATURES Fanuc 21 i-MB Control 20,000 RPM spindle Powerful 11 /18.5 kW (15 I 25 hp) spindle motor Cartridge spindle design High precision spindle with two double-row cylindrical bearings and two angular c
                    • X axis: 30"
                    • Y axis: 16"
                      OKK VM5ii
                      $RFQ
                      OKK VM5ii
                      SPECIFICATIONS Table Size 41.3” x 22.0” X Axis Travel 40.0” Y Axis Travel 20.0” Z Axis Travel 20.0” Spindle Horsepower 20 Hp Spindle RPM (Vari-Speed) 8,000 RPM Spindle Taper CAT40 Tool Changer Capacity 20
                      • X axis: 40"
                      • Y axis: 20"
                        Bertsch 10' X 1/2" Bending Roll
                        $29,500
                        Bertsch 10' X 1/2" Bending Roll
                        Capacity: 1/2" x 10' Max. Working Length: 120" Roll Diameter: 14" Max Rolling Thickness: 1/2" Type: Initial Pinch Operation:: Mechanical Rear Roll Motor: 10 H.P. Front Roll Wedge Motor (2):
                        • Roll length: 120"
                        • Thickness: 0.5"
                          DEVLIEG 4B-120 JIG MILL (1962)
                          $RFQ
                          DEVLIEG 4B-120 JIG MILL (1962)
                          Specifications Spindle Diameter: 4" Spindle Nose Taper: #50 (with Power Draw Bar) Spindle Travel: 60" - Vertical (Y-Axis) 20" - Horizontal (16) Spindle Speeds: 21 - 1000 RPM (6) Spindl
                          Studer S36 CNC Cylindrical Grinder (1998)
                          $RFQ
                          Studer S36 CNC Cylindrical Grinder (1998)
                          Specifications: Distance Between Centers: 39.4" Center Height: 6.9" Max. Workpiece Weight Between Centers: 286 Lbs Cross Slide (X): Max Travel: 10.5" Speed: 197 ipm Resolution:
                          STAR ST-38P* Swiss Type CNC Lathe (2011)
                          $RFQ
                          STAR ST-38P* Swiss Type CNC Lathe (2011)
                          *P specification has the ability to set the pitch error compof the ball screws Equipped with: LNS Sprint 542 magazine Bar Loader (12') w/ 3 guide channel and pusher sets 3 Turrets Sub Spindle Full C axis Y axis To
                          250 TON CLEARING SSDC PRESS S2-250-84-54 (1992)
                          $RFQ
                          250 TON CLEARING SSDC PRESS S2-250-84-54 (1992)
                          84" x 54" BED AREA 12" STROKE 30" SHUT HEIGHT 12" POWER RAM ADJUSTMENT 20-40 STROKES PER MINUTE 31" WINDOWS FLOOR STANDING CUSHION AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES T-SLOTTED RAM AND BOLSTER LIGHT CURT
                          • Tonnage: 250T
                          • Tonnage: 250T
                          • Tonnage: 250T
                            Mori Seiki SH 63
                            $RFQ
                            Mori Seiki SH 63
                            PALLETS (X) 24.8" X 24.8" LOAD CAPACITY 2640 LBS PALLET CHANGING TIME 15 SEC TABLE INDEXING TIME 2.3 SEC TABLE INDEXING 1-DEGREE CUTTING FEEDRATES 0.01-630 IPM RAPID TRAVERSE RATE XYZ 12
                            • X axis: 33.12"
                            • X axis: 33.12"
                            • X axis: 33.12"
                              Feintool SA Blanking Press GKP-F-320 (1975)
                              $RFQ
                              Feintool SA Blanking Press GKP-F-320 (1975)
                              Specification Total Main Ram Force 320 Tons Stroke 63 mm (2.48") Number of strokes max. 40 / min Ram adjustment 130 mm (5.11") V-RING: Nominal force 100 Tons Stroke 25 mm (1") COUNTER RAM: Nominal force
                              • Tonnage: 320T
                              • Stroke: 2.48"
                                Cincinnati 230AS Hydraulic CNC Press Brake (1986)
                                $RFQ
                                Cincinnati 230AS Hydraulic CNC Press Brake (1986)
                                Specifications: Tonnage Capacity:........................................... 230 Tons Overall Length of Bed and Ram:................ 192" (16' 0") Distance Between Housings:...................... 174" (14' 6") Stro
                                • Tonnage: 230T
                                  Robland X31
                                  $2,500
                                  Robland X31
                                  Table saw, joiner, planer, shaper, mortiser
                                  2 HP VALLEY HYDRAULIC DOUBLE END BUFFER AND SANDER
                                  $RFQ
                                  2 HP VALLEY HYDRAULIC DOUBLE END BUFFER AND SANDER
                                  2 HP VALLEY HYDRAULIC DOUBLE END BUFFER AND SANDER RACO Stock Number R018081 ARBOR SIZE ------------------------ 1-1/4" ARBOR X 5" LONG ON EACH SIDE SANDING WHEEL SIZE ------------ 3" WIDE DRIVE ---
                                  • Motor: 2HP
                                    C.R. ONSRUD MODEL F122HD15
                                    $RFQ
                                    C.R. ONSRUD MODEL F122HD15
                                    Dual FIVE-AXIS Extreme Duty Series (62″X122” axis travel) – with: Thick Cast-Iron Fixed Bridge & Cast Iron Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed Brid
                                    KOMO CNC ROUTER-VR 510TG
                                    $RFQ
                                    KOMO CNC ROUTER-VR 510TG
                                    Komo VR 510TG CNC Router, 10 stations, 5 ft. x 10 ft. table, 3 phase, 48v, vari-speed 626 MC5 Vector Control w/Dynaseal vac pump, Heviduty 30KVA 3 phase transformer GE Fanuc readout. Equipped with HSD 13.4 HP spindle; HS
                                    17" ROCKWELL DELTA SINGLE SPINDLE DRILL PRESS
                                    $RFQ
                                    17" ROCKWELL DELTA SINGLE SPINDLE DRILL PRESS
                                    17" ROCKWELL DELTA SINGLE SPINDLE DRILL PRESS MODEL 17-600 RACO Stock Number R018086 SWING --------------------------------------------- 17" CAPACITY ------------------------------------------ 1" IN C
                                    • Swing: 17"
                                    • Motor: 1.5HP
                                      TOS WHN 13A
                                      $RFQ
                                      TOS WHN 13A
                                      Model # WHN 13A NO 007-17 Travels: X-120" Y-75" W-40" RPM: 1000 ,Rapid 5,000, Max Fee rate 900 Controller: Heidenhain TNC 415B Table Capacity: 30,000 LBS
                                      • Spindle diameter: 120"
                                        WHITNEY JENSEN MODEL #58 KICK PRESS
                                        $RFQ
                                        WHITNEY JENSEN MODEL #58 KICK PRESS
                                        WHITNEY JENSEN MODEL #58 KICK PRESS MANUFACTURED 1963 RACO Stock Number R018074 CAPACITY, 2" HOLE THRU 16 GA. MILD STEEL ----- 5 TONS DEPTH OF THROAT ----------------------------------- 18" HEIGHT OF TH
                                        • Tonnage: 5T
                                        • Stroke: 1"
                                          7" X 12" ENCO #HVB-180E HORIZONTAL BAND SAW (MANUAL
                                          $RFQ
                                          7" X 12" ENCO #HVB-180E HORIZONTAL BAND SAW (MANUAL
                                          7" X 12" ENCO #HVB-180E HORIZONTAL BAND SAW (MANUAL) MADE IN TAIWAN MANUFACTURED 1988 RACO Stock Number R018067 CAPACITY ---------------------------------- 7" ROUNDS CAPACITY ----------------------
                                          • Width capacity: 7"
                                          • Height capacity: 12"
                                            10" KALAMAZOO MODEL K10 WET ABRASIVE CUT-OFF SAW
                                            $RFQ
                                            10" KALAMAZOO MODEL K10 WET ABRASIVE CUT-OFF SAW
                                            10" KALAMAZOO MODEL K10 WET ABRASIVE CUT-OFF SAW RACO Stock Number R018068 CAPACITY ------------------------------------ 1-1/2" SOLID ROUND STOCK CAPACITY ------------------------------------ 2-1/2"
                                            • Blade diameter: 10"
                                              Hurco VTXU (2006)
                                              $RFQ
                                              Hurco VTXU (2006)
                                              Specifications: X-Axis: 31.5" Y-Axis: 27.5" Z-Axis: 20" Number of Axis: 5 Table Size: 24" x 20.9" Max Weight On Table: 880 lbs Max Part Diameter: 21.7" Spindle Speed: 12,000 rpm Spindle Motor: 24 hp Rapid Tra
                                              • X axis: 31.5"
                                              • Y axis: 27.5"
                                                USED-STRYCO ROCKER ARM SPOT WELDER 40kVA
                                                $2,520
                                                USED-STRYCO ROCKER ARM SPOT WELDER 40kVA
                                                Make: Stryco Mfg. Co. Country of Origin: USA Model #: D12-40 Serial #: 4538 Style: ATV Condition: Great Features: Entron Control. Specifications: Throat: 9-1/2" Gap: 5" max. kVA: 40
                                                USED Rockwell Vertical Bandsaw Model Delta 28-3X0
                                                $1,620
                                                USED Rockwell Vertical Bandsaw Model Delta 28-3X0
                                                Make: Rockwell / Delta Country of Origin: USA Model #: 28-3X0 Serial #: 1523890 Condition: Good Specifications: Capacities: Throat: 20" Maximum Work Height Under Guide: 13-1/2" Maximum Work H
                                                NEVER USED-SNAPON "MUSCLE MIG" WELDER Model MM250SL
                                                $3,060
                                                NEVER USED-SNAPON "MUSCLE MIG" WELDER Model MM250SL
                                                “This unit was purchased BRAND NEW & has never been used!!! Does not included original packaging.” Make: Snap-On Country of Origin: United States Model #: MM250SL Serial #: 28812 Condition: New No Box / Never
                                                Amada FBD-8020E
                                                $29,500
                                                Amada FBD-8020E
                                                Capacity: 88 Tons Table Length 78.8" Max. Bending Length: 82.1" Distance Bet Columns: 66.9" Throat Depth: 15.75" Length of Stroke: 3.94" Open Height: 14.57" Controls NC9-EX 13.2 Gall
                                                • Tonnage: 88T
                                                  CINCINNATI 230-CBII X 8
                                                  $47,500
                                                  CINCINNATI 230-CBII X 8
                                                  Model: 230 CB II x 8 Capacity: 230 Tons Bending Length: 10' Distance Between Housings: 103" Stroke: 0 - 10" Max Gen IV Comark Control 5 Axis Capable ******No Back Gauge Machined for Flanges Top &
                                                  • Tonnage: 230T
                                                    1965 Texsteam, 65 HP, 1500 psi
                                                    $RFQ
                                                    1965 Texsteam, 65 HP, 1500 psi
                                                    Used Texsteam, 65 HP, 1500 psi in Newport News, VA Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, r
                                                    DOOSAN PUMA 400LC (2012)
                                                    $RFQ
                                                    DOOSAN PUMA 400LC (2012)
                                                    Chuck Size 20.9" Max Diameter Bar Capacity 6.5" Max Swing Over Bed / Carriage 30.3" / 23.2" Max Turning Diameter (Max / Std) 21.7" / 15" Distance Between Centers 86" Max Machining Length 81.7" Spindle S
                                                    MORI SEIKI NLX-2500MC / 700 (2012)
                                                    $RFQ
                                                    MORI SEIKI NLX-2500MC / 700 (2012)
                                                    Chuck Size 10" Max Diameter Bar Capacity 3.1" Max Swing Over Bed / Cover / Carriage 31" / 23" / 21.3" Max Turning Diameter (Max / Std) 14.4" / 10.6" Max Machining Length 27.7" Spindle Motor 24.7 / 20 HP
                                                    Komatsu E2T200N Press
                                                    $129,500
                                                    Komatsu E2T200N Press
                                                    220-Tons 15.75" stroke 5.91" Power ram adjustment 25.59" Shut height over bolster 78.74" LR x 31.5" FB Bed & Ram 6.57" thick T slotted bolster 44" windows Cushions Air Clutc
                                                    • Tonnage: 220T
                                                    • Stroke: 15.75"
                                                      Strippit Helios 510
                                                      $55,000
                                                      Strippit Helios 510
                                                      Resonator Wattage: 2000 Maximum Sheet Size: 60" X 120" Table Load Capacity: 1232 Lbs. X-Axis: 120" Y-Axis: 61" Z-Axis Travel: 11.8" Overall Dimensions: 22' X 10' X 8' H Weight:
                                                      • Wattage: 2000W
                                                      • X axis travel: 120'
                                                        Midbrook Two-Stage Hurricane Parts Washer (2011)
                                                        $RFQ
                                                        Midbrook Two-Stage Hurricane Parts Washer (2011)
                                                        Electrics: Supply voltage: 480VAC/3P/60hz Total Connected HP: 45.275 Total Motor FLA: 67.94 Amps Total Connected KW: 147.08 Estimated full load Amps: 195 Main Fuse or Breaker: 250 amps Plant Fuse or Breaker: 250 a
                                                        DMG DML 80 PowerShape Laser System (2005)
                                                        $RFQ
                                                        DMG DML 80 PowerShape Laser System (2005)
                                                        Equipped With: Rofin-Sinar RS 100 DP Q-Switched Diode-Pumped Nd:YAG Laser (100 Watt) Integrated Laser Control with 2-Axis Galvo = 181 mm flat field lens 225 mm working distance LASERSOFT PowerDrill LASERSOFT Power
                                                        Komo VMC50 (1995)
                                                        $RFQ
                                                        Komo VMC50 (1995)
                                                        Table: Table Size: 32" x 123" Maximum Table Load: Unlimited Travels: X-Axis Travel: 120" Y-Axis Travel: 32" Z-Axis Travel: 32" Spindle: Spindle Speeds - Maximum: 3,500 RPM Spindle Taper: CAT 50 Taper Main Motor
                                                        • X axis: 120"
                                                        • Y axis: 32"
                                                          Amada Vipros 358 King II
                                                          $99,500
                                                          Amada Vipros 358 King II
                                                          PRESS CAPACITY: 33 TONS MAX SHEET SIZE: 50 X 157.48" MAX. SHEET THICKNESS: 0.126" MAX. SHEET WEIGHT: 110 LB Y-AXIS TRAVEL: 50" AIR SUPPLY: 8.8 FT3/MIN WIDTH: 203.5" DEPTH: 162.2" HEIGHT:
                                                          • Tonnage: 33T
                                                            Amada Pega 357
                                                            $59,500
                                                            Amada Pega 357
                                                            Tonnage Capacity: 30 Tons Maximum Sheet Size: 72" X 50" X Axis Travel: 72" Y-Axis Travel: 50" Throat Depth: 50" Maximum Hole Diameter: 4.5" Maximum Material Thickn
                                                            • Tonnage: 33T
                                                            • Throat: 50"
                                                              Ganesh TY5040CNC (2011)
                                                              $RFQ
                                                              Ganesh TY5040CNC (2011)
                                                              Capacity: Swing over the bed: 52" Swing over Cross Slide: 36.20" Center Height: 25.60" Bed width of ways: 35.40" Spindle Spindle Bore.: 10.04" Spinde Nose: A2-15 Spindle Motor (Peak / 30 minute): 40 HP / 30 HP S
                                                              • Swing: 52"
                                                              • Spindle hole diameter: 10.04"
                                                                Cincinnati Series 12 Mechanical Brake
                                                                $34,500
                                                                Cincinnati Series 12 Mechanical Brake
                                                                Capacity............300 Ton Bottom of Stroke, 200 Ton Midstroke Length of Bed................12' Distance Between Housings....10' 6" Throat.......................10" Stroke......................
                                                                • Tonnage: 300T
                                                                  Niagara PN-90-70-30
                                                                  $14,500
                                                                  Niagara PN-90-70-30
                                                                  Tons: 90 Stroke: 3" Adjustment 5" SPM: 36 Shut height : 14" Bed 72" x 30" Ram Area 72" x 30" Air Clutch Air Counter Balance Steel Welded Frame
                                                                  • Tonnage: 90T
                                                                  • Stroke: 3"
                                                                    Nilson Model S-326 4-Slide
                                                                    $42,500
                                                                    Nilson Model S-326 4-Slide
                                                                    Nilson S-326 Fourslide Capacity: 3/16" Max. Strip Width: 1-5/8" Standards Feed Length: 26" SPM: 19-77 Standard Slide Strokes Front: 1-1/4" Sides: 3-1/2" Back: 2-1/2" Stroke of Str
                                                                    Amada Apelio 357
                                                                    $79,500
                                                                    Amada Apelio 357
                                                                    MAXIMUM TRAVERSE: 50"X72" MAXIMUM SHEET SIZE (WITH REPOSITIONING): 50"X144" MAXIMUM PUNCHING CAPCITY (MILD STEEL): 1/4" MAXIMUM HITS PER MINUTE: 350 MAXIMUM SHEET WEIGHT: 220 LBS MAXIMUM POS
                                                                    Franklin HD-145 (2006)
                                                                    $RFQ
                                                                    Franklin HD-145 (2006)
                                                                    Specifications: Maximum Beam weight/foot: 300 lbs Maximum Beam Depth: 40'' Minimum Beam Depth: 6'' Beam feed rate in X-Axis (maximum): 100 FPM Rapid Advance (Web): 420 IPM Rapid Advance (Flanges): 420 IPM Retract
                                                                    Haas ST40 (2012)
                                                                    $RFQ
                                                                    Haas ST40 (2012)
                                                                    Capacity: Swing: 35.4" Swing Over Cross Slide: 25.5" Max. Turning Length (without workholding): 44.0" Spindle: Spindle Speeds (RPM): 2400 RPM Spindle Bore: 4.62 " Bar Work Capacity (Thru Draw Tube).: 4.0" Spindle
                                                                    • Swing: 35.4"
                                                                    • Centers: 44"
                                                                      Ganesh Cyclone CY32 (2011)
                                                                      $RFQ
                                                                      Ganesh Cyclone CY32 (2011)
                                                                      AXIS TRAVELS: CNC Controlled Axis: 4 (X,Y,Z,&C) X-Axis Travel (Vertical Tool): 7.5" Y-Axis Travel (Cross Tool): 11.4" Z-Axis Travel (Sliding Headstock): 6.5" C-Axis Travel (Rotational Axis): 360,000 radial pos. SPI
                                                                      • Spindle hole diameter: 1.25"
                                                                        KURAKI KBM 11X CNC HORIZONTAL BORING MILL (2005)
                                                                        $RFQ
                                                                        KURAKI KBM 11X CNC HORIZONTAL BORING MILL (2005)
                                                                        Table Size 37.40"X 41.34" Spindle Diameter 4.3" Spindle Speed 3-3000 RPM Spindle Speed Range 2 Table Top To Spindle Center 0-47.24 Table Center To Spindle Nose 13.98"-41.54" Axis Travels X – Axis 59.06”
                                                                        • Spindle diameter: 59.06"
                                                                          Makino FNC 106A20 4-Axis Vertical Machining Center (1986)
                                                                          $RFQ
                                                                          Makino FNC 106A20 4-Axis Vertical Machining Center (1986)
                                                                          Specifications: Table: 65” x 33” Table working surface: 55” x 24” Travels: 41” x 26” x 22” Spindle taper: Cat 50 Spindle speeds: 3500 Spindle HP: 20 HP ATC: 20 Cutting speeds: 0.010
                                                                          • X axis: 41"
                                                                          • Y axis: 26"
                                                                            HAAS HL-6 (1998)
                                                                            $RFQ
                                                                            HAAS HL-6 (1998)
                                                                            EQUIPPED WITH: Haas CNC Control, Programmable Tailstock, 10 Position ID/OD Tool Turret,Heavy Duty Slant Bed Construction, High/Low Spindle Range, Tooling Package, Chip Conveyor and Coolant System. CATALOGUE SPECIF
                                                                            • Swing: 40"
                                                                            • Centers: 51"
                                                                              60 Ton x 6' ACCURPRESS CNC 7606, (1997)
                                                                              $RFQ
                                                                              60 Ton x 6' ACCURPRESS CNC 7606, (1997)
                                                                              Specifications: Tonnage Capacity:.......................................................................................................... 60 Tons Overall Length of Bed and Ram:........................................
                                                                              • Tonnage: 60T
                                                                                Doosan VM 3016LHs (2008)
                                                                                $RFQ
                                                                                Doosan VM 3016LHs (2008)
                                                                                STANDARD FEATURES Fanuc 21 i-MB Control 20,000 RPM spindle Powerful 11 /18.5 kW (15 I 25 hp) spindle motor Cartridge spindle design High precision spindle with two double-row cylindrical bearings and two angular c
                                                                                • X axis: 30"
                                                                                • Y axis: 16.1"
                                                                                  CLAUSING GB70 HYDRAULIC FABRICATOR
                                                                                  $RFQ
                                                                                  CLAUSING GB70 HYDRAULIC FABRICATOR
                                                                                  CAPACITY ................. 70 TON THROAT DEPTH ............. 9" OPEN HEIGHT .............. 14" STROKE LENGTH ............ 7" RAM SHAFT DIAMETER .....
                                                                                  • Tonnage: 70T
                                                                                  • Throat: 9"
                                                                                    2" LOOPCO Dedimpler
                                                                                    $RFQ
                                                                                    2" LOOPCO Dedimpler
                                                                                    419-872-2364 / [email protected] 2" LOOPCO Dedimpler, Stock #3198 SPECIFICATIONS: - Minimum Tube Length: 24" - Maximum Tube Length: 12' - Maximum Tube Diameter: 2" (50.8mm) - Minimum Tube Diameter: 1/2" (
                                                                                    Rapid 2436-C Series Grinder
                                                                                    $RFQ
                                                                                    Rapid 2436-C Series Grinder
                                                                                    Throat Size 24 in. x 36 in. Calmount Control Panel Cat. # KIM43035-3 35 KVAR 480 Volts 3 Phase 60 Hz. Motor: Automotive Industry (High Efficiency Motor Series) 3 Phase 125TE HP 1
                                                                                    MAZAK ST50N/3000U (2008)
                                                                                    $RFQ
                                                                                    MAZAK ST50N/3000U (2008)
                                                                                    SPECIFICATIONS: Max. Swing Over Bed: 31.69" Max. Swing Over Carriage: 22.05" Max. Cutting Diameter: 25.98" Distance Between Centers: 129.41" Max. Workpiece Length: 119.29" Max. Supportable Weight (With Chuck Weight
                                                                                    • Swing: 31.69"
                                                                                      Devlieg CNC Horizontal Boring Mill, 65K72 (1984)
                                                                                      $RFQ
                                                                                      Devlieg CNC Horizontal Boring Mill, 65K72 (1984)
                                                                                      SPECIFICATIONS: X Axis Travel 72" Y Axis Travel 60" Z Axis Travel (Spindle) 26" Table Width: 50" Table Length: 72" Spindle Motor 30 HP
                                                                                      • Spindle diameter: 72"
                                                                                        CLAUSING PUNCH PRESS / METAL MUNCHER GB70
                                                                                        $RFQ
                                                                                        CLAUSING PUNCH PRESS / METAL MUNCHER GB70
                                                                                        70 TON / 1'' THRU 7/8' FOOTSWITCH, LOT OF TOOLING, 16'' X 36'' BED
                                                                                        300 TON HAMILTON DOWN-ACTING 4-POST HYDRAULIC PRESS
                                                                                        $RFQ
                                                                                        300 TON HAMILTON DOWN-ACTING 4-POST HYDRAULIC PRESS
                                                                                        EQUIPPED WITH: DHS Die Heat System T-Slotted Bed And Ram (12" Spacing of Slots) Dual Palm Button Pedestal Control Stand Self Contained Hydraulic System Light Curtains CATALOGUE SPECIFICATIONS: Tonnage Ca
                                                                                        • Tonnage: 300T
                                                                                        • Stroke: 24"
                                                                                          ALPHA Double Cut Die Set
                                                                                          $RFQ
                                                                                          ALPHA Double Cut Die Set
                                                                                          419-872-2364 / [email protected] ALPHA Double Cut Die Set, Stock #3026B SPECIFICATIONS: - Double Cut Die Set, 70-210 Die 3004 OVERALL DIMENSIONS: - 20" X 29" X 19" APPROXIMATE WEIGHT: - 600 Lbs.
                                                                                          12" X 10" DAITO #GA260WII HYDRAULIC FULLY AUTOMATIC HORIZONTAL BA
                                                                                          $RFQ
                                                                                          12" X 10" DAITO #GA260WII HYDRAULIC FULLY AUTOMATIC HORIZONTAL BA
                                                                                          12" X 10" DAITO #GA260WII HYDRAULIC FULLY AUTOMATIC HORIZONTAL BAND SAW MANUFACTURED 1998 RACO Stock Number R018092 CAPACITY ---------- ( ROUND ) --------------- 10-1/4" CAPACITY ---------- ( RECTAN
                                                                                          • Width capacity: 12"
                                                                                          • Height capacity: 10"
                                                                                            EWAG EWAMATIC Precision Carbide Tool Grinder (1999)
                                                                                            $RFQ
                                                                                            EWAG EWAMATIC Precision Carbide Tool Grinder (1999)
                                                                                            X-axis, transverse adjustment mm: 360/ 14.7" Y-axis, height adjustment mm: 150/ 5.9" Z-axis, infeed stroke mm: 230/ 9.05" Axis resolution mm: 0,0001/ 0.000004"
                                                                                            Mazak Quick Turn Nexus 250-II MSY CNC Turning Center
                                                                                            $RFQ
                                                                                            Mazak Quick Turn Nexus 250-II MSY CNC Turning Center
                                                                                            Specifications: Maximum Swing 26.50" Maximum Machining Diameter 14.750" Maximum Bar Work Capacity 3" Maximum Machining Length 21.275" Main Spindle Chuck Size 10" Maximum Speed 6000 rpm Motor 35 H.P.
                                                                                            • Swing: 26.5"
                                                                                            • Centers: 21.275"
                                                                                              Wotan Rapid 5C CNC Floor Type Horizontal Boring Mill with Square Ram
                                                                                              $RFQ
                                                                                              Wotan Rapid 5C CNC Floor Type Horizontal Boring Mill with Square Ram
                                                                                              Reference #25807 Wotan Rapid 5C CNC Floor Type Horizontal Boring Mill with Square Ram Model: Rapid 5C Ram Type Age 192004 FEATURES: Age: 1983 Rebuilt & CNC Retrofit In 2004 By OEM Dorries Scharman Heidenha
                                                                                              • Spindle diameter: 6.3"
                                                                                              • X axis travel: 393.74"
                                                                                                3-1/2" (88.9mm) x .158" (4mm) HUAYE Pipe Straightener
                                                                                                $RFQ
                                                                                                3-1/2" (88.9mm) x .158" (4mm) HUAYE Pipe Straightener
                                                                                                419-872-2364 / [email protected] 3-1/2" (88.9mm) x .158" (4mm) HUAYE Pipe Straightener, Stock #3245 MODEL NUMBER: - JZ 089 SPECIFICATIONS: - Roll Configuration: 3 Over 3 - Number of Driven Rolls: 6 -
                                                                                                • Bar diameter: 3.5"
                                                                                                  Pacific 300D8-42
                                                                                                  $RFQ
                                                                                                  Pacific 300D8-42
                                                                                                  Specifications; Type - Straight Side Hydraulic Bed - 96" x 42" Slide - 96" x 42" (108" between uprights) Speeds - 215 IPM (Rapid approach) - 25 IPM (Press) - 132 IPM (Rapid return) Stroke - 24" Max. Open h
                                                                                                  • Tonnage: 300T
                                                                                                  • Stroke: 24"
                                                                                                    Deburring graining Fabtech Show Machine 2018
                                                                                                    $RFQ
                                                                                                    Deburring graining Fabtech Show Machine 2018
                                                                                                    General Specs and configuration : Hans Weber Deburring/Finishing machines (2 available) Weber Model TTSC 1(P2)-1100 (42” wide processing) Weber Model TTSC 1(P2)-1100 (42” wide processing) Both machines are new.
                                                                                                    Johnford VMC-2024 (1996)
                                                                                                    $RFQ
                                                                                                    Johnford VMC-2024 (1996)
                                                                                                    SPECIFICATIONS Spec Inch Year 1996 Control Fanuc 0-M Table Size 83"x34" Travels (X) 80" Travels (Y) 35" Travels (Z) 31" Spindle Taper CAT 40 Spindle Speed 6,000 RPM Machine Weight 36,000 lbs Number of
                                                                                                    • X axis: 80"
                                                                                                    • Y axis: 35"
                                                                                                      MAZAK ST50N/3000U (2008)
                                                                                                      $RFQ
                                                                                                      MAZAK ST50N/3000U (2008)
                                                                                                      SPECIFICATIONS: Max. Swing Over Bed: 31.69" Max. Swing Over Carriage: 22.05" Max. Cutting Diameter: 25.98" Distance Between Centers: 129.41" Max. Workpiece Length: 119.29" Max. Supportable Weight (With Chuck Weight
                                                                                                      • Swing: 31.69"
                                                                                                        Kitamura Bridgecenter 8F (2006)
                                                                                                        $RFQ
                                                                                                        Kitamura Bridgecenter 8F (2006)
                                                                                                        Specifications: Table Table Size 35.5" x 98.5" Table Load Capacity 6,600 lbs T-Slots (7) x 18mm Travels X-Axis Travel 80" Y-Axis Travel 42.7" Z-Axis Travel 28" Table Surface to Spindle Nose 9.9" - 37.9" Spindl
                                                                                                        • X axis: 80"
                                                                                                        • Y axis: 42.7"
                                                                                                          5" X 7" Kalamazoo Model #350A Automatic Cold Saw
                                                                                                          $RFQ
                                                                                                          5" X 7" Kalamazoo Model #350A Automatic Cold Saw
                                                                                                          No description providedBlade Speed1800 & 3600 PM Capacity Rounds4-3/4" Left or Right Capacity Rounds @ 45 Degrees4-1/2" Capacity Rectangles3-1/2" x 7-1/2" Capacity Square @ 45 Degrees4" Motor3 HP
                                                                                                          Nilson S2F Fourslide
                                                                                                          $RFQ
                                                                                                          Nilson S2F Fourslide
                                                                                                          No description providedMaximum Wire Diameter1/8" Maximum Strip Width1-1/2" Standard Feed Length10" Motor3HP Press Attachment
                                                                                                          ROMI M-23 (2005)
                                                                                                          $RFQ
                                                                                                          ROMI M-23 (2005)
                                                                                                          CENTER HEIGHT................................................................. 11.42" DISTANCE BETWEEN CENTERS...................................... 120" SWING OVER BED .................................................
                                                                                                          Kuraki KBT-13DXA (1993)
                                                                                                          $RFQ
                                                                                                          Kuraki KBT-13DXA (1993)
                                                                                                          Specifications: X-Longitudinal Table Travel 118.11”, Y-Spindle Vertical Travel 78.74”, Z-Column Cross Travel 51.18”, W-Spindle Axial Travel 27.56”, Table Size 63” X 70.87”, Max Loading Weight on Table 22,000 l
                                                                                                          • Spindle diameter: 5.12"
                                                                                                          • X axis travel: 118.11"
                                                                                                            Reuland Tank Turning Rolls Roller
                                                                                                            $2,000
                                                                                                            Reuland Tank Turning Rolls Roller
                                                                                                            Reuland Magnetic Brake Patent No. 2725123 PH-3 HZ-60 Volts-230 Type-OLDA Model-2986 www.powermechanical.com
                                                                                                            4' X 14 GA. DIACRO MECHANICAL POWER SQUARING SHEAR14
                                                                                                            $RFQ
                                                                                                            4' X 14 GA. DIACRO MECHANICAL POWER SQUARING SHEAR14
                                                                                                            4' X 14 GA. DIACRO MECHANICAL POWER SQUARING SHEAR MANUFACTURED 1980 RACO Stock Number R018066 CAPACITY ------- ( MILD STEEL ) ------------- 14 GA. CAPACITY ------- ( STAINLESS STEEL ) ------ 16 GA. BLADE LEN
                                                                                                            • Maximum thickness: 14Ga
                                                                                                            • Cutting length: 50"
                                                                                                              7-1/2 TON DIACRO #18E STYLUS TURRET PUNCH PRESS
                                                                                                              $RFQ
                                                                                                              7-1/2 TON DIACRO #18E STYLUS TURRET PUNCH PRESS
                                                                                                              7-1/2 TON DIACRO #18E STYLUS TURRET PUNCH PRESS MANUFACTURED 1975 RACO Stock Number R018065 PUNCHING PRESSURE ------------------------- 7-1/2 TONS PUNCHING CAPACITY -------------------------- 2" IN 16 GAUGE M
                                                                                                              • Tonnage: 7.5T
                                                                                                                Tsugami MB38SY CNC Lathe
                                                                                                                $85,900
                                                                                                                Tsugami MB38SY CNC Lathe
                                                                                                                2004 Tsugami MB38SY CNC Lathe with Parts Conveyor - Integrated Chip Conveyor Chip Blaster JV8-1000 Mist Collector - Machine Mounted Coolant Thru Sub-Spindle Bar Feeder Cut off Tool Holder Work Offset Coolant
                                                                                                                CLAUSING KONDIA FV1 48VS08 VERT MILL W/ PROTO TRAK MX-2 2-AXIS CNC CONTROL
                                                                                                                $RFQ
                                                                                                                CLAUSING KONDIA FV1 48VS08 VERT MILL W/ PROTO TRAK MX-2 2-AXIS CNC CONTROL
                                                                                                                SPECIFICATIONS TABLE SIZE: 9" X 48" NUMBER OF T-SLOTS: 3 WIDTH OF T-SLOTS: 5/8" CENTER DISTANCE OF T-SLOTS: 2-9/16" TRAVERSES LONGITUDINAL TRAVEL (X-AXIS): 36" SADDLE TRAVEL (Y-AXIS):
                                                                                                                Jet Edge HR612 (2008)
                                                                                                                $RFQ
                                                                                                                Jet Edge HR612 (2008)
                                                                                                                Specifications: Travels –X-Axis: 144" - Y-Axis: 72" - Z-Axis: 12" Intensifier Output:60,000 PSI Flow Rate: 1.1 GPM Motor: 50 HP 3/60 Accuracy: +/- 0.001" Contouring Speed: 750"
                                                                                                                CINCINNATI MILACRON CNC GANTRY VERTICAL MILLING MACHINE
                                                                                                                $RFQ
                                                                                                                CINCINNATI MILACRON CNC GANTRY VERTICAL MILLING MACHINE
                                                                                                                SPECIFICATIONS: CONTROL TYPE...............................: DELTA TAU (3) DIMENSIONAL TABLE SIZE.................................: 128" x 430" (X) TRAVEL ................................: 400" (Y) TRAVEL ...........
                                                                                                                • X axis: 400"
                                                                                                                • Y axis: 128"
                                                                                                                  Mazak HTC400 (1996)
                                                                                                                  $RFQ
                                                                                                                  Mazak HTC400 (1996)
                                                                                                                  X Axis Travel 22.05" Y Axis Travel 20.08" Z Axis Travel 20.08" Pallet Size ( 2 ) 15.7" X 15.7" Chip conveyor not included 24 tool, 10,000 rpm spindle, Cat 40 When powered up, this alarm appears when trying t
                                                                                                                  • X axis: 22.05"
                                                                                                                  • Y axis: 20.08"
                                                                                                                    1996 Okuma Cadet VMC-40VB CNC Vertical Machining Center
                                                                                                                    $21,500
                                                                                                                    1996 Okuma Cadet VMC-40VB CNC Vertical Machining Center
                                                                                                                    Specifications: Control ..................................................................... OSP 7000M X Axis Travel ....................................................................... 30” Y Axis Travel .......
                                                                                                                    • X axis: 30"
                                                                                                                    • Y axis: 15"
                                                                                                                      Blanchard 22AK-42 Rotary Surface Grinder
                                                                                                                      $RFQ
                                                                                                                      Blanchard 22AK-42 Rotary Surface Grinder
                                                                                                                      Blanchard 22AK-42 Rotary Surface Grinder
                                                                                                                      Snow Drill And Tapping Model 25 PDR 3, One drilling head one tapping head
                                                                                                                      $995
                                                                                                                      Snow Drill And Tapping Model 25 PDR 3, One drilling head one tapping head
                                                                                                                      Year: 80s Make: Snow Model: 2 SPDR3 Condition: Good Electrical: 230/460/3 wired 230 Serial #: On Request Machine Status: Under Power Shipping Info: We can load Machine Location: City: On Request State: Sout
                                                                                                                      Okamoto ACC 6 x 18 DX Surface Grinder fully automatic w/ downfeed
                                                                                                                      $8,795
                                                                                                                      Okamoto ACC 6 x 18 DX Surface Grinder fully automatic w/ downfeed
                                                                                                                      Year: ? Make: Okamoto Model: ACC 6 x 18DX Condition: Good Electrical: 230/460/3 wired 230 Serial #: On Request Machine Status: Under Power Shipping Info: We can load Weight: 2400 Machine Location: City: On
                                                                                                                      Quincy Air Compressor
                                                                                                                      $RFQ
                                                                                                                      Quincy Air Compressor
                                                                                                                      240 Gallon Tank 25HP 3 phase
                                                                                                                      1999 Superior, 6-5-5000, 1000 HP, 150 psi
                                                                                                                      $RFQ
                                                                                                                      1999 Superior, 6-5-5000, 1000 HP, 150 psi
                                                                                                                      Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
                                                                                                                      1999 Superior, 6-5-5000, 1000 HP, 150 psi
                                                                                                                      $RFQ
                                                                                                                      1999 Superior, 6-5-5000, 1000 HP, 150 psi
                                                                                                                      Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
                                                                                                                      1972 Cleaver-Brooks, CB-200-250, 250 HP, 30 psi
                                                                                                                      $RFQ
                                                                                                                      1972 Cleaver-Brooks, CB-200-250, 250 HP, 30 psi
                                                                                                                      Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
                                                                                                                      1972 Cleaver-Brooks, CB-200-250, 150 HP, 30 psi
                                                                                                                      $RFQ
                                                                                                                      1972 Cleaver-Brooks, CB-200-250, 150 HP, 30 psi
                                                                                                                      Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
                                                                                                                      1/2" AOT 2 Die 2 Blow Cold Header
                                                                                                                      $RFQ
                                                                                                                      1/2" AOT 2 Die 2 Blow Cold Header
                                                                                                                      No description providedMaximum Cutoff Diameter12mm (1/2") Maximum Cutoff Length120mm PKO Stroke24mm Maximum Production160 PPM Approx. Floor Size14'L x 6-1/2'W Approx. Weight35,000 lbs Heading Tonnage120 Ton (Metric) 132
                                                                                                                      Categories:
                                                                                                                      Condition:
                                                                                                                      Manufacturer:
                                                                                                                      Location:
                                                                                                                      Price:
                                                                                                                      •  to 
                                                                                                                      <Prev | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | Next>