buy & sell, new & used machinery, machine tools & equipment

<Prev | 191 | 192 | 193 | 194 | 195 | 196 | 197 | 198 | 199 | 200 | Next>
Refine: Viewing 9901 - 9950 of 15934 matches
Sort by:
Items Per Page:  20 |  50  |  100
85 Ton 14" Throat Scotchman DO 8514-20M *Made in the USA* NEW IRONWORKER, dual operat
$RFQ
85 Ton 14" Throat Scotchman DO 8514-20M *Made in the USA* NEW IRONWORKER, dual operat
NEW SCOTCHMAN 85 TON IRONWORKER MODEL: DO 8514-20M   *MADE IN THE USA*   STANDARD FEATURES: Dual operator allows for two operators to work at the same time at full capacity 85-ton punch station (1-1/16&q
  • Angle L1: 85"
  • Angle L2: 14"
    10.75" Blade Dia Scotchman CPO 275 PKPD Semi-Auto *Made in the USA* COLD SAW, pneumat
    $RFQ
    10.75" Blade Dia Scotchman CPO 275 PKPD Semi-Auto *Made in the USA* COLD SAW, pneumat
    NEW SCOTCHMAN SEMI-AUTO COLD SAW MODEL: CPO 275 PKPD   *MADE IN THE USA*   STANDARD EQUIPMENT & FEATURES: Air-operated clamp for material vise Pneumatic power down feed with electric controls Emerge
    • Blade diameter: 10.75"
      14" Blade Dia 5hp HP Scotchman CPO 350 NFPKPD Semi-Auto *Made in the USA* COLD SAW, n
      $RFQ
      14" Blade Dia 5hp HP Scotchman CPO 350 NFPKPD Semi-Auto *Made in the USA* COLD SAW, n
      NEW SCOTCHMAN NON-FERROUS SEMI-AUTO COLD SAW MODEL: CPO 350 NFPKPD   *MADE IN THE USA*   STANDARD EQUIPMENT & FEATURES: Air-operated clamp for material vise Pneumatic power down feed with electric co
      • Blade diameter: 14"
        10.75" Blade Dia Scotchman CPO 275 PK Manual *Made in the USA* COLD SAW, with power c
        $RFQ
        10.75" Blade Dia Scotchman CPO 275 PK Manual *Made in the USA* COLD SAW, with power c
        NEW SCOTCHMAN MANUAL COLD SAW w/POWER CLAMP MODEL: CPO 275 PK   *MADE IN THE USA*   STANDARD EQUIPMENT & FEATURES: Air-operated clamp for material vise Operator controlled trigger switch Double sel
        • Blade diameter: 10.75"
          14" Blade Dia Scotchman CPO 350 PK Manual *Made in the USA* COLD SAW, with power clam
          $RFQ
          14" Blade Dia Scotchman CPO 350 PK Manual *Made in the USA* COLD SAW, with power clam
          NEW SCOTCHMAN MANUAL COLD SAW w/POWER VISE MODEL: CPO 350 PK   *MADE IN THE USA*   STANDARD EQUIPMENT & FEATURES: Air-operated clamp for material vise Operator controlled trigger switch Double self
          • Blade diameter: 14"
            14" Blade Dia Scotchman CPO 350 PKPD Semi-Auto *Made in the USA* COLD SAW, pneumatic
            $RFQ
            14" Blade Dia Scotchman CPO 350 PKPD Semi-Auto *Made in the USA* COLD SAW, pneumatic
            NEW SCOTCHMAN SEMI-AUTO COLD SAW MODEL: CPO 350 PKPD   *MADE IN THE USA*   STANDARD EQUIPMENT & FEATURES: Air-operated clamp for material vise Pneumatic power down feed with electric controls Emerge
            • Blade diameter: 14"
              14" Blade Dia 5hp HP Scotchman CPO 350 NF Manual *Made in the USA* COLD SAW, non-ferr
              $RFQ
              14" Blade Dia 5hp HP Scotchman CPO 350 NF Manual *Made in the USA* COLD SAW, non-ferr
              NEW SCOTCHMAN NON-FERROUS MANUAL COLD SAW MODEL: CPO 350 NF   *MADE IN THE USA*   STANDARD EQUIPMENT & FEATURES: Manual clamp for material vise Operator controlled trigger switch Double self-centeri
              • Blade diameter: 14"
                Cope & Stick Shaper
                $175
                Cope & Stick Shaper
                Cherokee Tool Co. Cope & Stick Shaper; Cutter Set; Ogee Style; 3-3/8" Diameter; 1-1/4" H; 3/4" Bore; Model 154-1 & 154-2
                Beading Shaper Cutter
                $50
                Beading Shaper Cutter
                Beading Shaper Cutter; 3-5/8" Diameter; 1/4" R; 1" H; 3/4" Bore; Model 321812
                Door Edge Finger Pull Shaper Cutter
                $60
                Door Edge Finger Pull Shaper Cutter
                Door Edge Finger Pull Shaper Cutter; 4-1/2" Diameter x 1-1/4" H x 1-1/4 - 1 Bore
                Beading & Slot Cutter Set (4pc) for Table Saw
                $99
                Beading & Slot Cutter Set (4pc) for Table Saw
                LRH Beading & Slot Cutter Set (4pc) for Table Saw; 5" Diameter; 4 Wing w/5/8" Bore; Model-Beading J106718; Model-Slot J49914
                12" Saw Blade
                $79
                12" Saw Blade
                Saw Blades (3 Each); $79.00 (Each); Various Tooth Count; 12"; 30mm Bore; Newly Sharpened
                Miter Gauge for Delta Shaper
                $149
                Miter Gauge for Delta Shaper
                Delta Miter Gauge for Delta 43-791 Shaper
                Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line
                $RFQ
                Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line
                Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line New 2002, Stock No: 17824 Coil Weight: 5000 Kg - 11,023 Lbs. Coil O.D.: 800-1500 mm - 31.49" - 59.05" Coil I.D.: 508-610 mm - 20" - 24.01"
                3/8" Lewis 8SV Straighten And Cut
                $RFQ
                3/8" Lewis 8SV Straighten And Cut
                No description providedWire Diameter Range.125" - .375" @100K PSI Maximum Cutoff Length16' Speed Range45-250 FPM E-Manual
                RAS 20.10 Seamer
                $12,750
                RAS 20.10 Seamer
                Year: 2001 Make: RAS Model: 20.10 Condition: Good Electrical: 230/3Phase Serial #: On Request Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 1600 Dimension: L x W x H 80" x 4' x
                Boyar Schultz 612 Surface Grinder,
                $RFQ
                Boyar Schultz 612 Surface Grinder,
                Manufacturer Boyar Schultz, Model 612, Serial No. 16587, Chuck 6 x 12 Magnatool Manual, Table Size 6" x 12", Longitudinal Travel 19", Cross Travel 7", Work Height (7" Dia Wheel) 0" - 11-1/4&
                • Table width: 6"
                • Table length: 12"
                  Rush 132A Drill Grinder
                  $RFQ
                  Rush 132A Drill Grinder
                  Model No. 132A, Manufacturer Rush, Serial No. , Year Mfg. 1996, Drill & Tool Size Cap. .080" to .250", Max Drill Length 14", Max Dia of tools other than drills 2.500" with 1.250 Shank Dia., Max To
                  • Maximum drill capacity: 0.25"
                    Supertec G38P-150-NC OD Grinder
                    $15,995
                    Supertec G38P-150-NC OD Grinder
                    Year: 2012 Make: Supertec Model: G38P-150-NC Condition: Good Electrical: 230/3Phase Serial #: On Request Machine Status: Not Under Power Shipping Info: Rigging Fee Extra Weight: 14000 Dimension: L x W x H 203&
                    32" Northfield Vertical wood Cutting Bandsaw and Re Saw
                    $3,450
                    32" Northfield Vertical wood Cutting Bandsaw and Re Saw
                    32" Throat 16" Max. Height under the guides 25-1/2" x 32" and 12-3/3" x 17- 3/4" Tables Tilting Table 3 HP 220 Volt 3 -Phase Motor Runs well Tires could use alittle attention. Rugg
                    Kalamazoo Fully Automatic Non Ferrous Compound Mitering Cold Saw
                    $4,250
                    Kalamazoo Fully Automatic Non Ferrous Compound Mitering Cold Saw
                    Machine Specs: Capacity @ 90 Solids 2-1/2" Round 4-3/4" Rectangle 6-1/4" x 4-1/4" @ 45 Rectangle 5-1/2"
                    10" x 14" Marvel Fully Automatic Tilting Band Saw
                    $8,950
                    10" x 14" Marvel Fully Automatic Tilting Band Saw
                    Machine Specs: Capacity Round 10" Rectangle 10" x 14" Blade Size 144" x 1" x .035 Blade Speeds
                    18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
                    $9,950
                    18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
                    Machine Specs: Capacity 18" x 20" Capacity at 45 18" x 12-1/2" Table Size 30" x 33" Blade Length 14'-6" Blade Width
                    24” Grob Variable Speed Vertical Band Saw with Air Feed Table
                    $2,650
                    24” Grob Variable Speed Vertical Band Saw with Air Feed Table
                    Machine Specs: Throat 24” Max Height 12” Table Size 24” x 28” Table Tilts 5 & 45 Degrees Blade Speeds 40 - 5000 RPM Blade Size 1/8 to 1” Wide by 179” Long Main HP 3 HP Weight 1670 LBS Equipped With: Welder
                    16” Doall Vertical Band Saw,With Extra Height,
                    $3,250
                    16” Doall Vertical Band Saw,With Extra Height,
                    Machine Specs: Throat 16” Cutting Height 12” ( Catalogue Spec) 14” Actual Table 24” x 24” Table Tilts Left/Right 45/10 Blade Size 1/16” - 1” Speeds 2 Ranges 50 - 300 FPM 860 - 5200 FPM Motor 1-1/2 HP 220/440 Volt
                    Lors Spot Welder 40 KVA
                    $RFQ
                    Lors Spot Welder 40 KVA
                    No description providedTransformer KVA40 Electrics440V/60 Cycle
                    • Power: 40KVA
                    • Power: 40KVA
                      1/32" Nilson 700L Fourslide
                      $RFQ
                      1/32" Nilson 700L Fourslide
                      No description providedWire Capacity1/32" Maximum Strip Width3/4" Straightener Feed Length4" Speed Range20 - 540 SPM Motor3/4 HP Stroke of Front Slide7/16" Stroke of Side Slides11/16" Stroke of Back Slide1/2" Approx. Flo
                      1200 LBS Cooper Weymouth Double End Coil Reel
                      $950
                      1200 LBS Cooper Weymouth Double End Coil Reel
                      600 LBS Capacity Each Side 10” Max Width 48” Max Dia of of Coil 10” Min Id 20” Max. Id 6 Keepers Good Condition Inspect in Our Lebanon NJ Warehouse
                      Deckel 3Dimensional Engraving/Pantograph Machine
                      $1,950
                      Deckel 3Dimensional Engraving/Pantograph Machine
                      Machine Specs: Ratio Min. 1 : 1.5 Max. 1 : 10 Work Table 7-7/8” x 14-1/8” Copy Table 12-1/2” x 20-1/2” Spindle Speeds 475 - 20.000 RPM KW .37/.55 220 Volt 3Phase Weight Approx. 1000 LBS Inspect Under Power in Our
                      6-1/2” x 20” Barker Horizontal Mill with Vertical Head
                      $2,750
                      6-1/2” x 20” Barker Horizontal Mill with Vertical Head
                      Machine Specs: Table Size 6-1/2” x 20” Travels Long 10” Cross 6” Vertical 6” Spindle Speeds 30 -15300 RPM Spindle Taper #30 Spindle HP2 220 Volt 3 Phase Equipped With Rotex Vertical Head - Model Model VA 255, S
                      18” x 79” Tos Horizontal Mill with Vertical Head
                      $8,950
                      18” x 79” Tos Horizontal Mill with Vertical Head
                      Specs: Table Size 18” x 79” Travels Long 55” Cross 17” Knee 18” Spindle Speeds (20) 20 - 1400 RPM Spindle Taper NO. 50 Spindle HP 15 KW (20 HP Approx) 220/440 3 Phase Feeds 13/32 - 52 IPM Rapids 129 IPM Weight
                      9” x 46” Wells Index Vertical Milling Machine
                      $2,250
                      9” x 46” Wells Index Vertical Milling Machine
                      Machine Specs: Table Size 9” x 46” Travels Long 32” Cross 12” Quill 5” Knee 16” Spindle Speeds 75 - 2850 RPM Spindle HP 2 HP 220 Volt 3 Phase Spindle Taper #30 Spindle Feeds .003, .006 and .0015 Weight 2600 LBs
                      8” x 36” Burke Millrite Vertical Milling Machine
                      $2,750
                      8” x 36” Burke Millrite Vertical Milling Machine
                      Machine Specs: Table Size 8” x 36” Travels Long 25” Cross 8” Quill 4” Knee 15” Spindle Speeds 185 - 2500 RPM Spindle HP 1 HP 220 Volt 3 Phase Spindle Taper R8 Weight 14500 LBs Equipped With: 1 HP Milling Head
                      10” x 36” South Bend Engine lathe
                      $2,450
                      10” x 36” South Bend Engine lathe
                      10” Swing 36” Center Distance 4-1/2’ Bed 4- 228 TPI Equipped with Bed Turret Collet Closer with Nose Piece 2 5” 3 Jaw Chucks 6” 4 Jaw Chuck Drive Plate Factory Cabinet 3 Phase Motor Please Note Missing Thread
                      13" x 30" Pratt & Whitney Geared Head Tool Room Lathe
                      $2,450
                      13" x 30" Pratt & Whitney Geared Head Tool Room Lathe
                      Machine Specs: Swing 13" Swing Over Slide 7" Center Distance 30 Spindle Bore 1-3/8" Spindle Speeds (8) 18 - 528 RPM HP 2 HP 220 Volt 3 _ Phase Threads
                      19” x 54” Leblond Regal “ Servo Shift” Inch/ Metric Engine Lathe
                      $8,950
                      19” x 54” Leblond Regal “ Servo Shift” Inch/ Metric Engine Lathe
                      Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 3” Spindle HP 10 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch 2 -
                      19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
                      $6,950
                      19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
                      Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 78” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 25 - 1000 RPM Threads Inch
                      19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
                      $6,950
                      19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
                      Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch
                      14” OGP Optical Comparator, with Surface Illumination
                      $7,950
                      14” OGP Optical Comparator, with Surface Illumination
                      Machine Specs: Table Size 8” x 32” Travels Long. 12” Vertical Travel 9” Focus Travel (Cross) 3” Equipped With: Quadracheck II 2 Axis Read Out with Geometric Functions Power Traverse of Longitudinal and Vertical Tr
                      14" J & L Optical Comparator
                      $3,950
                      14" J & L Optical Comparator
                      6" x 25-1/2" Table 31.25 Power Lens Power UP and Down 8" x 6" Travels Light Visor Bench Centers and V - Block 115 Volt Operation
                      19.69” x 27.56” x 15.75” Mitutoyo Coordinate Measuring Machine
                      $18,500
                      19.69” x 27.56” x 15.75” Mitutoyo Coordinate Measuring Machine
                      Machine Specs: Travels X 19.69” Y 27.56” Z 15.75” Granite Table Size 25.12‘ x 45.67” Work Piece Weight Max 180 KG Height Max 20.8” Machine Dimensions Width 42” Depth 58” Height 89” Weight 615 KG Equipped With”
                      Sunnen Horizontal Hone
                      $2,650
                      Sunnen Horizontal Hone
                      Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
                      Sunnen Horizontal Hone
                      $2,650
                      Sunnen Horizontal Hone
                      Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
                      Sunnen Horizontal Hone
                      $1,750
                      Sunnen Horizontal Hone
                      Machine Specs: Length 16" Range .060 - 6.5" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base Very Good Condition Inspect Under Power in Our Branchbur
                      Duap Ag Ball Roller Tool and Cutter Grinder
                      $2,750
                      Duap Ag Ball Roller Tool and Cutter Grinder
                      Machine Specs: Table Table Size 4" x 25-3/4" Travel 14-1/2" Swivels Right and Left Cross Travel 6" Wheel Head Swivels 90 Degr
                      Rush Drill Grinder Model 258
                      $3,950
                      Rush Drill Grinder Model 258
                      Drill Capacity.......................................................................3/32" to 3" Maximum Drill Length...................................................................16" Has the ability
                      KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
                      $8,950
                      KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
                      Machine Specs: Swing over table: 12-1/4" Distance between tailstocks: 32" Table working surface: 5-1/4" x 37-1/4" Longitudinal table travel: 20" Table travel per rev. of handwheel: 9/16"
                      6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
                      $1,750
                      6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
                      Machine Specs: Grinding Pocket 6" x 14" Spindle to Table 15" Grinding Wheel 8" HP 1.5 HP 220 Volt 3 Phase Graduations Cross .001 D
                      6” x 12” Boyar Schultz Hand Feed Surface Grinder
                      $1,750
                      6” x 12” Boyar Schultz Hand Feed Surface Grinder
                      Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic C
                      6” x 12” Harig Hand Feed Surface Grinder
                      $2,750
                      6” x 12” Harig Hand Feed Surface Grinder
                      Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1.5 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic
                      Categories:
                      Condition:
                      • X Used (15934)
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      <Prev | 191 | 192 | 193 | 194 | 195 | 196 | 197 | 198 | 199 | 200 | Next>