Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

Kinefac MC-4 CNC Cylindrical Die Kine-Roller

$RFQ

No description providedSpindle Diameter1-1/2" (40mm) Maximum Die Width2-5/8" (115mm) Die Diameter Range3 - 4 - 3/8" (75mm - 110mm) Minimum Diameter In or Thrufeed1/32" (1mm) Maximum Diameter Thru Feed3/4" (20mm) Unlimite

Maximum workpiece diameter: 1.5"
Maximum workpiece diameter: 1.5"

Ivyland, PA
View Listing

KSB Etachrom BC 050 - 200/2202 C10 Close-Coupled Pump

$RFQ

No description providedMotor24.5 KW @ 460V/600Hz Installation/Operating Manual

Ivyland, PA
View Listing

Lafert LNP180ME2 2 Pole Motor

$RFQ

No description providedHP30HP 22 KW Rated Speed3555 Rated Torque (NM)59.1 Electrics460/796V/60Hz; 400/690V/50Hz Approx. Weight210 KG / 464 lbs

Ivyland, PA
View Listing

Cleaver-Brooks, CBI-200-800, 800HP, 150 PSI - $RFQ

$RFQ

Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w

Newport News, VA
View Listing

1976 CINCINNATI MODEL 5FL12 HYDRAULIC SHEAR, 12' X 5/8"

$RFQ

SPECIFICATIONS NOMINAL CAPACITY: 5/8” X 12’ CAPACITY @ INCREASED RAKE: 3/4” X 12’ DISTANCE BETWEEN HOUSINGS: 12’3” THROAT DEPTH: 18" MOTOR: 40 HP WEIGHT: 53,000 LBS EQUIPPED WI

Bethlehem, PA
View Listing

9/16" Asahi Okuma ORH-120 2 Die 3 Blow Cold Header

$RFQ

No description providedMaximum Cutoff Diameter9/16" (14mm) Maximum Cutoff Length4" (100mm) Maximum Kickout Length 1st Die5-1/8" (130mm) PKO Stroke15mm 1st Die Diameter2-1/2" 2nd Die Diameter3-1/2" Maximum Production100 P

Ivyland, PA
View Listing

10,000Lb Wean Coil Down-Layer

$RFQ

Make: Wean Weight Capacity: 10,000Lb Size: 42" x 62" Overall Dimensions: 8'(L) x 4'(W) x 5'(H) Hydraulic Drive Self - Contained Hydraulics Control Station

Maximum weight capacity: 10000Lb
Maximum coil width: 60"

West Bloomfield, MI
View Listing

2012 CATERPILLAR D5K XL DOZER

$72,500

4 CYL CAT ENGINE, 3 SPD TRANS W/ JOYSTICK STEERING, 20 IN PADS, 6-WAY BLADE (9 FT 3 IN WIDE), SWEEPS, ENCLOSED CAB W/ A/C & HEAT, 5770 HRS SHOWING

Sutherlin, VA
View Listing

IGM Gantry CNC Welding Cell

$RFQ

Reference #26597 IGM Gantry CNC Welding Cell Age: 2007 Gantry Travels: Longitudinal Travel, X-Axis ........... 1377" Cross Travel, Y-Axis .................. 118.11" Ram Stroke, Z-Axis ........

Melville, NY
View Listing

Microlution 5100-S 5-Axis CNC Micro Milling Machine (2011)

$162,000

Positional accuracy +/-0.00004″ (1 micron) Maximum acceleration over 2g True 5-axis motion available with optional trunnion-style rotary axes High speed spindles: 50,000 rpm and greater Work Volume 5-Axis X: 3.94″

X axis: 3.94"
Y axis: 3.94"

Orion Township, MI
View Listing

United Model #3 Butt Welder

$RFQ

Cam Type Flash, Pneumatic Clamping, Steel Wheels & Roller Track<br /><br /><strong>Check out our full inventory <span style="color: #e74c3c;"><a style="color: #e74c3c;" href="h

Power: 100KVA
Power: 100KVA

Ivyland, PA
View Listing

2010 SUMMIT SMARTCUT SC26-6X120 COMBINATION CNC/MANUAL LATHE, 27” X 120”

$RFQ

SPECIFICATIONS CAPACITIES SWING OVER BED: 26-3/8” SWING OVER CROSS SLIDE: 15-3/4” HEADSTOCK SPINDLE BORE: 6.1" SPINDLE NOSE: A2-11 SPINDLE SPEED RANGES (3): 11 - 1000 RPM CARRIAGE CROSS SLIDE TRAVEL:

Swing: 27"
Centers: 120"

Bethlehem, PA
View Listing

Noble & Lund 108" x 348" Heavy Duty Engine Lathe

$RFQ

Reference #26785 Noble & Lund 108" x 348" Heavy Duty Engine Lathe CAPCITY: Maximum Swing Over Bedways ............ 108" Center Height ......................... 54" Distance Between Cent

Swing: 108"
Centers: 54"

Melville, NY
View Listing

1968 COVEL MODEL 10H HYDRAULIC 2-AXIS SURFACE GRINDER, 6" X 18"

$RFQ

SPECIFICATIONS WORKING SURFACE: 6” X 18” LONGITUDINAL TRAVEL: 20" TRAVERSE TRAVEL: 7” CAPACITY UNDER GRINDING WHEEL: 16-1/2” UNDER 7” WHEEL CENTERLINE OF SPINDLE TO TOP OF TABLE” 3-1/2” – 20” OVERALL SIZE OF T

Table width: 6"
Table length: 18"

Bethlehem, PA
View Listing

USED A & E MODEL NKLF-46 SPOT WELDER WITH ROCKER ARM, 45 KVA

$RFQ

SPECIFICATIONS KVA: 45 THROAT LENGTH: 34” GENERAL ELECTRICS: 220 VOLTS, 3 PH, 60 CYC DIMENSIONS: 64” LR X 12” FB X 48” H PRICE $ 1,250.00

Power: 45KVA

Bethlehem, PA
View Listing

1968 MARVEL MODEL 8/M1 VERTICAL TILTING HEAD BANDSAW, 18" X 18"

$RFQ

SPECIFICATIONS CAPACITY NOMINAL: 18" X 18" MAXIMUM: 23" X 18" BLADE AT 45 DEGREE ANGLE: 15-1/2" X 18" BLADE: 14' 8" X ¾" X .032” WORKING SURFACE OF TABLE: 32-3/4&q

Throat capacity: 18"
Height capacity: 18"

Bethlehem, PA
View Listing

12 Stand Rafter Gutter Rollformer with tooling and pendant control

$15,000

. We are pleased to offer for your consideration: (1) 12-Stand Rafter Gutter Rollformer Stock Number: - 13037 - List Price: $22,500 Discounted Price: $15,000 Serial: 623 Machine Specifications:

# Stands: #12

Granger, IA
View Listing

NIKKEN SR1-150 DIVIDING HEAD

$RFQ

NIKKEN SR1-150 DIVIDING HEAD MANUFACTURED 1990 RACO Stock Number R018257

Des Plaines, IL
View Listing

6" BUCK 6 JAW CHUCK WITH ADAPTER PLATE

$RFQ

6" BUCK 6 JAW CHUCK WITH ADAPTER PLATE RACO Stock Number R018259 FOR HARDINGE LATHE TAPER MOUNT SPINDLE

Des Plaines, IL
View Listing

6" DELTA MODEL 52-611 BELT GRINDER AND 12" DISC GRINDER

$RFQ

6" DELTA MODEL 52-611 BELT GRINDER AND 12" DISC GRINDER RACO Stock Number R018237 STANDARD BELT SIZE ------------------------ 6" X 48" TABLE SIZE FOR BELT ------------------------ 7-3/8" X 1

Grinding wheel diameter: 12"

Des Plaines, IL
View Listing

AIRBRASIVE 6500 MICRO ABRASIVE JET MACHINE

$RFQ

AIRBRASIVE 6500 MICRO ABRASIVE JET MACHINE RACO Stock Number R018245 PRESSURE UP TO ---------------------------- 140 PSI MINIMUM LINE PRESS ------------------------ 50 PSI AIR SUPPLY -------------------------------

Des Plaines, IL
View Listing

8 DRAWER INTERIOR STEEL PRODUCTS STORAGE CABINET

$RFQ

8 DRAWER INTERIOR STEEL PRODUCTS STORAGE CABINET RACO Stock Number R018248 NUMBER OF DRAWERS ------------------------- 8 CABINET DIMENSIONS ------------------------- 28-1/4" X 28" X 39-1/4"

Des Plaines, IL
View Listing

8 DRAWER INTERIOR STEEL PRODUCTS STORAGE CABINET

$RFQ

8 DRAWER INTERIOR STEEL PRODUCTS STORAGE CABINET RACO Stock Number R018249 NUMBER OF DRAWERS ------------------------- 8 CABINET DIMENSIONS ------------------------- 28-1/4" X 28" X 39-1/4" DIM

Des Plaines, IL
View Listing

56" INTERIOR STEEL PRODUCTS STORAGE CABINET

$RFQ

56" INTERIOR STEEL PRODUCTS STORAGE CABINET RACO Stock Number R018241 WITH 2 SLIDING DOORS NUMBER OF DRAWERS ON RIGHT SIDE ----------- 7 ( 26" X 30" DEEP ) NUMBER OF DRAWERS ON LEFT SIDE -----------

Des Plaines, IL
View Listing

56" LISTA DRAWER STORAGE CABINET WITH 2 SLIDING DOORS

$RFQ

56" LISTA DRAWER STORAGE CABINET WITH 2 SLIDING DOORS RACO Stock Number R018254 NUMBER OF DRAWERS ON RIGHT SIDE ----------- 6 (26" X 30" DEEP) NUMBER OF DRAWERS ON LEFT SIDE ------------- 3 HEAVY DUT

Des Plaines, IL
View Listing

#0 National 0-500 High Speed Flat Die Thread Roller

$RFQ

No description providedDiameter.086" - .190" (#2 thru #10) Production250 - 500 PPM Blank Length Maximum3" Thread Length (Maximum)3" Electrics240V / 3 Phase Approx. Weight3,500 lbs Approx. Floor Size5' x 6'

Maximum workpiece diameter: 0.19"
Maximum workpiece diameter: 0.19"
Maximum thread length: 1.625"

Ivyland, PA
View Listing

Cleaver-Brooks, CBLE-101-200-150, 200 HP, 150 PSI - $RFQ

$RFQ

Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w

Newport News, VA
View Listing

2005 SFM-Sunfirm #CST428014A

$49,995

ear: 2005 Make: Sunfirm-SFM Model: CST4280-14A Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 30,000 Dimension: L x W x H Machine Locati

Swing: 42"
Centers: 144"

Mooresville, NC
View Listing

HOEFLER, Rapid 800, New in 2009. Siemens 840D

$RFQ

Tip Circle Diameter: Max 800mm Profile height: 80mm Module: 1-35 Grinding wheel swiveling angle: +120/-45

Maximum gear diameter: 31.496"

changwon,
View Listing

OKAMOTO, 400 NCS, Gear Grinding machine

$RFQ

Max. Diameter of Work Piece: 400mm Module 0.5 - 5.0 Number of tooth: 12 - 255 Distance between Centers: 200 - 420mm Grinding Wheel swiveling angle: +/- 45 degree Wheel Size: 350 Dia * 84/104 * Dia 160 7 axis con

Maximum gear diameter: 15.748"

changwon,
View Listing

Universal Transportable Radial Drills/ NOVISA/ TUG 100/ Digital display

$RFQ

Maker: NOVISA (http://www.novisa.it) Model: TUG 100 Head Tilting: 180 degree Heas Rotation: 360 degree Max. Tilting of Arm to downwards: 26 degree Max. Tilting of Arm to upwards: 17 degree Machine height: 40

Arm length: 9.868'
Column diameter: 15.748"

changwon,
View Listing

Miller / Jetline Auto Welder

$49,000

2002 Miller / Jetline Auto Tig Welder setup for sale as the result of an upgrade at a fabrication shop. Previously used for Aluminum and Stainless Steel welding in the aerospace industry, but can be used for any material

Rives Junction, MI
View Listing

PINES #1 Pipe, Tube & Bar Bender

$5,950

Capacity: 1.575 " Horz/Vert: Horz Description DIAL-A-BEND CONTROLLER

THOUSAND OAKS, CA
View Listing

PEDDINGHAUS 210 SUPER 11 Ironworker

$4,950

Angle (L1): 3 " Angle (L2): 3 " Angle (T): 0.3125 " Tonnage: 35 T Description ASSORTED DIES

THOUSAND OAKS, CA
View Listing

NICCO NSG-600 Reciprocating Surface Grinder

$3,950

NICCO NSG-600 Reciprocating Surface Grinder Table-W: 8 " Table-L: 24 " Description UNDER POWER & RUNNING, COOLANT PUMP

THOUSAND OAKS, CA
View Listing

Thompson Reciprocating Surface Grinder

$RFQ

GENERAL SPECIFICATIONS TABLE SIZE: 36” X 120” LONGITUDINAL TRAVEL 126” CROSS TRAVEL 38” VERTICAL TRAVEL 36” TABLE FEE

Orion Township, MI
View Listing

Blanchard Grinder 32-60 Rotary Surface Grinder

$RFQ

GENERAL SPECIFICATIONS (COMPLETELY REBUILT IN 2001 BY CONE-BLANCHARD IN EXCESS OF $9,000 AND MACHINE IS IN EXCELLENT CONDITION) REBUILT GEAR BOX IN HOUSE IN 2003. 60" MAGNETIC CHUCK DIAMETER 64" MAX. TU

Orion Township, MI
View Listing

Thompson Surface Grinder 10 PCX

$RFQ

GENERAL SPECIFICATIONS WORK CAPACITY: WIDTH 40" HEIGHT 36" LENGTH 120" HYDRAULIC OIL RESERVOIR CAPACITY: 120 STANDARD WHEEL SIZE: DIA.: 20" FACE WIDTH: 6" HOLE DIA.: 12&

Orion Township, MI
View Listing

Blanchard Rotary Grinder 42-84

$RFQ

GENERAL SPECIFICATIONS (COMPLETELY REBUILT IN 2001 BY CONE-BLANCHARD IN EXCESS OF $100,000 AND MACHINE IS IN EXCELLENT CONDITION) 84" CHUCK DIAMETER 24" UNDER WHEEL 42" SEGMENTED WHEEL CHUCK 5,000 W

Orion Township, MI
View Listing

Gardner 2H30 Double Spindle Precision Grinder

$RFQ

GENERAL SPECIFICATIONS ABRASIVE DISC DIAMETER 26" OR 30" MAXIMUM THICKNESS OF USABLE ABRASIVE 3" MAXIMUM WORK WIDTH WITH STANDARD HOOD 4" MAXIMUM ABRASIVE THICKNESS 4" GUN TYPE HEAD FEED

Orion Township, MI
View Listing

Gardner 2H40 Double Spindle Precision Grinder

$RFQ

GENERAL SPECIFICATIONS ABRASIVE DISC DIAMETER 42" MAXIMUM THICKNESS OF USABLE ABRASIVE 2" MAXIMUM WORK WIDTH WITH STANDARD HOOD 4" MAXIMUM ABRASIVE THICKNESS 4" GUN TYPE HEAD FEED INCREMENT .0

Orion Township, MI
View Listing

Thompson Reciprocating Surface Grinder

$RFQ

GENERAL SPECIFICATIONS TABLE SIZE: 16” X 44” LONGITUDINAL TRAVEL 44” CROSS TRAVEL 18” VERTICAL TRAVEL 16” TABLE FEED

Orion Township, MI
View Listing

Thompson Reciprocating Surface Grinder

$RFQ

GENERAL SPECIFICATIONS TABLE SIZE: 14” X 60” LONGITUDINAL TRAVEL 64” CROSS TRAVEL 22” VERTICAL TRAVEL 28” TABLE FEED

Orion Township, MI
View Listing

THOMPSON 10CX

$RFQ

GENERAL SPECIFICATIONS TABLE SIZE: 36" X 120" LONGITUDINAL TRAVEL 126" CROSS TRAVEL 38" V

Orion Township, MI
View Listing

MITSUBISHI M-V5BVertical Machining Center

$9,950

X: 31.5 " Y: 20.1 " Z: 18.1 " Power: 10 hp RPM: 8000 rpm # ATC: 18 Table-W: 20.1 " Table-L: 39.4 " Taper: CAT-40 Control: CNC (MITSUBISHI 520) Description UNDER POWER & RUNNING

THOUSAND OAKS, CA
View Listing

MILLTRONICS ML22/60 CNC Lathe

$29,950

MILLTRONICS ML22/60CNC Lathe Chuck Size: 12 " Bar Capacity: 3 " # Axis: 2 Power: 24 hp Max RPM: 2000 rpm Swing: 31 " Machining Length: 64.5 " Tailstock: Yes Dimensions: 90" X 145" X 84" Weight: 10,000 Contr

THOUSAND OAKS, CA
View Listing

LANDIS 1R Universal Cylindrical Grinder

$7,950

LANDIS 1R Universal Cylindrical Grinder Swing: 10 " Centers: 20 " Power: 3 hp Workhead Motor: 0.5 hp Workhead Spindle Speed: 600 RPM Grinding Wheel Dia.: 12 " Dimensions: 78" x 54" x 64" H Weight: 4150 (LBS)

THOUSAND OAKS, CA
View Listing

GRAND RAPIDS DWA Drill Grinder

$3,950

GRAND RAPIDS DWADrill Grinder Description UNDER POWER & RUNNING

THOUSAND OAKS, CA
View Listing

BERTSCH 14 Plate Bending Roll including Pinch

$19,500

BERTSCH 14Plate Bending Roll including Pinch Length of Rolls: 10 ' Max Thickness: 1.125 " # Rolls: 3 Hyd/Mech: Mech Power: 30 hp Roll Diameter: 14 " Description UNDER POWER & RUNNING

THOUSAND OAKS, CA
View Listing

WFL, Turnmill, M150/6500, New in 2009, Siemens 840D

$RFQ

Swing over Bed 1470mm, Cross travel(x) 1120mm, Turning length 6700mm, Max. Loading capacity between center without rest: 15tons, C axis 0.001 deg, Y axis 12500mm, B axis 90 deg, Milling speed: 3200rpm, SPindle taper HS

changwon,
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: