buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Work Holding

Work Holding Equipment for Sale

182 new & used work holding equipment items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
Refine: Viewing 61 - 80 of 182 matches
Sort by:
Items Per Page:  20  |  50 |  100
21" Cushman 3-Jaw Manual Chuck
$RFQ
21" Cushman 3-Jaw Manual Chuck
with 6 1/2" Thru Hole A-15 Back
  • Diameter: 21"
  • # Jaws: #3
    20.5" x 40"H x 21" Devlieg Stackable Angle Plate, T-Slotted
    $RFQ
    20.5" x 40"H x 21" Devlieg Stackable Angle Plate, T-Slotted
    Reference #31976 20.5" x 40"H x 21" Devlieg Stackable Angle Plate, T-Slotted 2 Piece Stackable FEATURES: T-Slotted Stackable 2-Piece Design Cast Iron Construction SPECIFICATION: Total Height
    8" WEBSTER & BENNETT CHUCK JAWS, SET OF FOUR (4), 3 STEP, WILL F
    $RFQ
    8" WEBSTER & BENNETT CHUCK JAWS, SET OF FOUR (4), 3 STEP, WILL F
    MODEL........................ T39.40/1 QUANTITY..................... 4 JAW HEIGHT................... 8" JAW WIDTH.................... 2 1/4" STEP 1 HEIGHT................ 3" STEP 2 HEIGHT.............
    • Diameter: 8"
    • # Jaws: #4
      50" X Axis 26" Y Axis Haas VF-5D/40TR VERTICAL MACHINING CENTER, Haas 5-Axis Con
      $79,500
      50" X Axis 26" Y Axis Haas VF-5D/40TR VERTICAL MACHINING CENTER, Haas 5-Axis Con
      HAAS VERTICAL MACHINING CENTER MODEL VF-5D/40TR,  NEW: 2009   SPECIFICATIONS: TRAVELS X-AXIS ......................... 50" Y-AXIS ......................... 26" Z-AXIS .........................
      22" X Axis 15.75" Y Axis Ganesh 2216 VERTICAL MACHINING CENTER, Fagor Control, 8
      $14,500
      22" X Axis 15.75" Y Axis Ganesh 2216 VERTICAL MACHINING CENTER, Fagor Control, 8
      GANESH VERTICAL MACHINING CENTER MODEL: VMC 2216,  NEW: 2008   SPECIFICATIONS: TABLE SIZE ......................... 36" X 12" X-AXIS TRAVEL ...................... 22" Y-AXIS TRAVEL .......
      Electromagnetic Standard Pole Chuck with Cutler Hammer Controller
      $RFQ
      Electromagnetic Standard Pole Chuck with Cutler Hammer Controller
      Electromagnetic Standard Pole Chuck with Cutler Hammer Controller (release/hold/off).
      36" x 45" x 72" T-Slotted Box Type Angle Plates (2)
      $RFQ
      36" x 45" x 72" T-Slotted Box Type Angle Plates (2)
      Reference #31411 36" x 45" x 72" T-Slotted Box Type Angle Plates (2) CAPACITY: Width ................................. 36" Height ................................ 72" Depth ..............
      T-Slotted Riser Tables 42" x 24" x 127.5" Cast Iron
      $RFQ
      T-Slotted Riser Tables 42" x 24" x 127.5" Cast Iron
      Reference #31412 T-Slotted Riser Tables CAPACITY: Length ................................ 127.5" Width ................................. 24" Height ................................ 42" Number of T
      31" ROTOMORS 4-JAW Self Centering Hydraulic Chuck with 15" Bore
      $RFQ
      31" ROTOMORS 4-JAW Self Centering Hydraulic Chuck with 15" Bore
      ROTOMORS 31" 4-JAW BIG BORE POST STYLE CHUCK Automatic Self-Centering Chuck with Big Thru Bore and Built-in Hydraulic Cylinder Model MC-ID-P4, Stock # K15855 DESCRIPTION: T
      31" ROTOMORS 3-Jaw Hydraulic Chuck w/ 15" Bore, Model MC-ID
      $RFQ
      31" ROTOMORS 3-Jaw Hydraulic Chuck w/ 15" Bore, Model MC-ID
      ROTOMORS 31" 3-JAW BIG BORE CHUCK Automatic Self-Centering Chuck with Big Thru Bore and Built-in Hydraulic Cylinder Model MC-ID, Stock# K15852 DESCRIPTION: This type of self-centering
      ATS A2-8 5C Collet Chuck COLLETS, 5C
      $750
      ATS A2-8 5C Collet Chuck COLLETS, 5C
      ATS 5C COLLET CHUCK FOR A2-8 SPINDLE FOR MORE INFORMATION: Call Mike at 973-497-7540
      500 Jacobs Rubberflex For D1-3 Spindle COLLETS, Uses 500 Series Collets
      $295
      500 Jacobs Rubberflex For D1-3 Spindle COLLETS, Uses 500 Series Collets
      JACOBS RUBBERFLEX Collet Chuck for D1-3 Spindle Nose Takes up to an 1.06" Cap. Collet - the 501 thru 510 series collets Very Good condition in all respects Complete with collet shown in photos Missing the pins, b
      500 Jacobs Rubberflex For L-0 Spindle COLLETS, 501 - 510 Collets
      $395
      500 Jacobs Rubberflex For L-0 Spindle COLLETS, 501 - 510 Collets
      JACOBS RUBBERFLEX Collet Chuck for L-0 Threaded Spindle Nose an L-O spindle nose is just under 4-1/2" Dia Threads & 6 TPI L0 is a very common size for LeBlond Regal lathes Takes from .100 to 1.06" Cap. Collet - or
      500 Jacobs Rubberflex For D1-6 Spindle COLLETS, Uses 500 Series Collets
      $395
      500 Jacobs Rubberflex For D1-6 Spindle COLLETS, Uses 500 Series Collets
      JACOBS RUBBERFLEX Collet Chuck for D1-6 Spindle Nose Takes up to an 1.06" Cap. Collet Series 500 collets Very Good condition in all respects FOR MORE INFORMATION: Call David at 973-497-7570
      500 Jacobs Rubberflex For D1-3 Spindle COLLETS, Uses 500 Series Collets
      $395
      500 Jacobs Rubberflex For D1-3 Spindle COLLETS, Uses 500 Series Collets
      JACOBS RUBBERFLEX Collet Chuck for D1-3 Spindle Nose Takes up to an 1.06" Cap. Collet - the 501 thru 510 series collets Very Good condition in all respects Complete with collet shown in photos FOR MORE IN
      METRIC AND IMPERIAL COLLET EXTENSIONS
      $25
      METRIC AND IMPERIAL COLLET EXTENSIONS
      We sell a wide variety of collet extensions priced at $25. All our products are in stock and available for immediate pickup or shipping to your location countrywide. Feel free to contact us for all your tooling needs or
      PRECISION VISES
      $50
      PRECISION VISES
      We sell a wide variety of vices ranging from $50 to $1500. All our products are in stock and available for immediate pickup or shipping to your location countrywide. Feel free to contact us for all your tooling needs or
      Chuck Jaws (4) 11.5" x 4.375" x 6.75"
      $RFQ
      Chuck Jaws (4) 11.5" x 4.375" x 6.75"
      Reference #30189 Chuck Jaws, Face Plate Type For Vertical Boring Mill Features: Matched Set 3" Jaw Travel Keyed CAPACITY: Overall Dimensions (LxWxH) ........ 11.5" x 4.375" x 6.75"
      • Diameter: 11.5"
        Chuck Jaws (4) 12.25” x 5.5” x 6.75”
        $RFQ
        Chuck Jaws (4) 12.25” x 5.5” x 6.75”
        Reference #30188 Chuck Jaws, Face Plate Type For Vertical Boring Mill Features: Matched Set(4) 6" Jaw Travel Keyed CAPACITY: Overall Dimensions (LxWxH) ........ 12.25" x 5.5" x 6.75"
        • Diameter: 0.75"
          Howa CNC Lathe Actuator No. 821 Power Hydraulic Cylinder Turning Center
          $659
          Howa CNC Lathe Actuator No. 821 Power Hydraulic Cylinder Turning Center
          Howa CNC Lathe Actuator No. 821 Power Hydraulic Cylinder Turning Center Came off of Wasino CNC Lathe Condition is Used.
          Related Subcategories:
          Categories:
          Condition:
          Manufacturer:
          Location:
          Price:
          •  to 
          1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10