buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolls

Metal Rolls for Sale

375 new & used metal rolls items for sale
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19
Refine: Viewing 261 - 280 of 375 matches
Sort by:
Items Per Page:  20  |  50 |  100
TENNSMITH SR 24-49 in. x 20 ga. Manual Slip Roll
$RFQ
TENNSMITH SR 24-49 in. x 20 ga. Manual Slip Roll
CALL 386-304-3720 FOR AVAILABILITY FEATURES: *MADE IN USA *TENNSMITH'S slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty, cast iron end frames and a welded steel ba
12' X 1-1/4" BERTSCH BENDING ROLL
$RFQ
12' X 1-1/4" BERTSCH BENDING ROLL
WILL DO 1-1/4" STOCK MAX. ROLLS ................ 32" TOP ROLLER ........... 151" BOTTOM ROLERS (2) .... 146" MAIN MOTOR ........... 30 HP 220/440 VOLT 3 PHASE 2 ADDITIONAL MOTORS .. 2 HP V
TIN KNOCKER TK2236 3 ft x 22 ga. Manual Slip Roll
$RFQ
TIN KNOCKER TK2236 3 ft x 22 ga. Manual Slip Roll
CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Here's "the beef"! Tin Knocker rolls are among the strongest in the industry. Precision machined and ground from high carbon steel, these roll
72" x 16 ga., NATIONAL, No. NR7216, powered, 4" rolls, 1 HP, New
$RFQ
72" x 16 ga., NATIONAL, No. NR7216, powered, 4" rolls, 1 HP, New
OPTIONAL ACCESSORIES: Wire groove, 3/8", 1/2" or 5/8" . . . . . . . . . . . . . . . . . . $ 680.00 FEATURES: National's 4" power rolls are designed for simple operation. Standard with forward a
61" x 10 ga., GMC, #PBR-0510E, initial pinch, NEW
$RFQ
61" x 10 ga., GMC, #PBR-0510E, initial pinch, NEW
OPTIONAL ACCESSORIES: Cone attachment (to make cone shaped parts) . . . . . . . . . . . . $ INC Three (3) grooves; 3/8", 1/2" and 5/8" on roll for bending wire . . INC EQUIPPED WITH: LED
ERCOLINA, 2.5" x 2.5" x 1/4", CE50H3, hydraulic, 3 rolls driven, 2.5 HP mot
$RFQ
ERCOLINA, 2.5" x 2.5" x 1/4", CE50H3, hydraulic, 3 rolls driven, 2.5 HP mot
OPTIONAL ACCESSORIES: Angle iron twist correction device. . . . . . . . . . . . . . . 1,400.00 Tie bar assembly. . . . . . . . . . . . . . . . . . . . . . . . 650.00 Large spiral bending attachment . . . . . .
10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
$RFQ
10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
RUBBER COVERED ROLLS ON DRIVEN AND IDLER STANDS. CENTER TO CENTER WHEEL DISTANCES - 39" TO 68-1/2" WHEEL SIZE - (3) 12" DIAMETER X 4" WIDE ROLLS (OVERALL WIDTH - 13") CAPACITY ..........
12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
$RFQ
12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
3 MOTOR MACHINE INITIAL PINCH TYPE MANUFACTURER ......... WEBB MODEL # .............. 24L MAX CAPACITY ......... 1-1/2" X 12'
1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
$RFQ
1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
SPECIFICATIONS: 1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL RATED BENDING CAPACITY 1-3/8" X 10' CAPACITY (ROLLING OVER 120" DIAMETER) . 1-5/8" X 10' PRE-BENDING
4' x 3" LOWN MODEL #B-300 BENDING ROLL
$RFQ
4' x 3" LOWN MODEL #B-300 BENDING ROLL
ROLLS ................... 4' LONG x 3" DIAMETER MAXIMUM CAPACITY ........ 16-18 GAUGE EQUIPPED WITH: MANUAL DROP END FOOT PEDAL ACTIVATION MOTOR DATA: 1 HP, 208-220/440V, 3PH, 60CYC, 1735 RPM WITH CONTROL
MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
$RFQ
MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
Diameter of Forging Dies 6" Width of Roll Dies 6" Press set up to receive flat back segmental dies Equipped with: Roll Shaft Extensions for operation Die Mounting of Overhanging Rolls Air Clutch
AJAX MODEL #6 FORGING ROLL
$RFQ
AJAX MODEL #6 FORGING ROLL
Width of Roll dies ................................. 60" Maximum roll die dia. .............................. 44" Maximum Length rolled section ...................... 82" Weight, approx. ...............
BUFFALO #1 HORZONTAL BENDING ROLLS
$RFQ
BUFFALO #1 HORZONTAL BENDING ROLLS
MANUAL HEIGHT ADJUSTMENT OF UPPER ROLL MANUAL VERTICAL & LATERAL ADJUSTMENT OF GUIDE ROLLS FOUR SET OF ANGLE ROLLS MISCELANEOUS SPACE PLATES FOUR SET OD RADIOUS ROLLS 10 HP MOTOR, WIRED 3 PHASE, 60 CYCLE, 220 VOLTS
10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
$RFQ
10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
WITH TOP/BOTTOM COIL SUPPORT PEELER TABLE ROLL SIZE ......... 6"DIA X 10"WIDE BELLY ROLLS ....... 10"W X 2-1/2 DIA BOTTOM ROLL DRIVER TOP ROLL HOLD DOWN SIDE GUIDES DRIVEN BY AC MOTOR EQUIPPED
New Tennsmith Slip Roll Model SR24
$RFQ
New Tennsmith Slip Roll Model SR24
New Tennsmith Slip Roll Model SR24 Bending Length .............. 24" Diameter Rolls .............. 2" Wire Grooves: 3/16, 1/4, 5/16" Shipping Weight: 190 lbs. Note - Stand is
  • Length: 24"
    Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 1
    $RFQ
    Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 1
    Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 10 New 1975 Capacity........................... 3/8" x 7 ft ft. (Mild Steel) Roll Diameter (Upper & Lower) ..... 11.03&
    BAILEIGH Manual Roll Bender R-M10
    $RFQ
    BAILEIGH Manual Roll Bender R-M10
    CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Since Baileigh introduced the R-M10 in 2004, this ring roller has proved it does almost everything larger roll benders can—for a fraction of the price. Maxim
    BAILEIGH Plate Bending Machine PR-10500-4NC
    $RFQ
    BAILEIGH Plate Bending Machine PR-10500-4NC
    CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: PR-10500-4NC numerically controlled four roll plate bending machine is the next step in production plate rolling. This 10 foot 1/2” mild steel machine features a ne
    BAILEIGH Four Roll Plate Bending Machine PR-10500-4
    $RFQ
    BAILEIGH Four Roll Plate Bending Machine PR-10500-4
    CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: The PR-10500-4 four roll plate bending machine has been refined over the years through extensive research and development and is considered one of the finest plate ro
    BAILEIGH Hydraulic Plate Roll PR-1003-4
    $RFQ
    BAILEIGH Hydraulic Plate Roll PR-1003-4
    CALL FOR BEST PRICING! FEATURES: The PR-1003-4 hydraulic plate roll would be the perfect for any industrial fabrication shop or sheet metal shop that has a need to roll 1/4” mild steel in 10 foot widths. The PR-100
    Related Subcategories:
    Categories:
    Condition:
    Manufacturer:
    Location:
    Price:
    •  to 
    <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19