buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolls > Plate Bending (incl Pinch) Rolls

Plate Bending Rolls For Sale

148 new & used plate bending roll items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
Refine: Viewing 1 - 20 of 148 matches
Sort by:
Items Per Page:  20  |  50 |  100
WYSONG B48 PLATE BENDING ROLL
$RFQ
WYSONG B48 PLATE BENDING ROLL
Bending  Capacity:  4'  x  12-14  Ga.   Roll  Diameter:  4" Roll  Length:  50"
10 GA. x 60" WDM Series 403-5-5 4-Roll Double Pinch Plate Bending Roll
$RFQ
10 GA. x 60" WDM Series 403-5-5 4-Roll Double Pinch Plate Bending Roll
S/N: 61169 New: 2012 EQUIPPED WITH: Fully Hydraulic With Instant Start-Stop-Reverse. 2-Roll Drive Emergency Stop Cable. Hydraulic Drop End. Forward & Reverse Foot Pedal. Adjustable Pinch Roll Pressure With Kn
  • Roll length: 60"
  • Thickness: 135"
    DAVI MCB 3070 WT 3.5" x 10'' CNC 4-Roll Hydraulic Plate Roll
    $RFQ
    DAVI MCB 3070 WT 3.5" x 10'' CNC 4-Roll Hydraulic Plate Roll
    Reference #30259 DAVI MCB 3070 WT 3.5" x 10'' CNC 4-Roll Hydraulic Plate Roll FEATURES: DAVI Leonardo CNC Control With Graphic Display Power Driven Top & Bottom Rolls Overhead Plate Support Lef
    • Roll length: 120"
    • Thickness: 3.5"
      5' x 10 GA New Dimension Model MP5-135 Initial Pinch Bending Roll
      $RFQ
      5' x 10 GA New Dimension Model MP5-135 Initial Pinch Bending Roll
      Serial No. 03061992 Age: 2003 Capacity 5' x 10 GA Roll Length (between bearings) 62" Roll Diameter 5" Surface Feet per Minute 18 Working Height 34" Main Motor 3 HP Electrics 3/60/480V Ap
      • Roll length: 62"
        BERTSCH #30 2.50" x 13'6" Initial Pinch Plate Bending Roll
        $RFQ
        BERTSCH #30 2.50" x 13'6" Initial Pinch Plate Bending Roll
        Reference #30121 BERTSCH #30 2.50" x 13'6" Initial Pinch Plate Bending Roll SPECIFICATIONS: Overall Length of Bending Rolls ....... 13'6" Between Frames ....................... 18'8&q
        • Roll length: 30121"
        • Thickness: 2.5"
          1" x 120" FACCIN Biko B3-3138 Hyd 3 Roll Plate Bending Roll, 2012
          $RFQ
          1" x 120" FACCIN Biko B3-3138 Hyd 3 Roll Plate Bending Roll, 2012
          Manufacturer: FACCIN Model: B3-3138 Year: 2012 Condition: Very Good Specifications: Maximum Rolling Capacity (Cold)--------------- 0.984" @ 75" ID Maximum Pre-bending Capacity (Cold)--------- 0.787&q
          • Roll length: 120"
          • Thickness: 1"
            12" Cap 48" Width Wysong B-48 BENDING ROLL
            $8,950
            12" Cap 48" Width Wysong B-48 BENDING ROLL
              12 GA x 4' WYSONG INITIAL PINCH PLATE ROLL MODEL B48    S/N PR14-318    NEW 1972   CAPACITY .................... 12 GA WORKING LENGTH .............. 48" MOTOR ........
            BERTSCH #30 2.71" x 10' Initial Pinch Plate Bending Roll
            $RFQ
            BERTSCH #30 2.71" x 10' Initial Pinch Plate Bending Roll
            Reference #30046 BERTSCH #30 2.71" x 10' Initial Pinch Plate Bending Roll CAPACITY: Overall Length of Bending Rolls ....... 10' Top Roll Diameter ..................... 25.5" Bottom Roll Diameter
            • Roll length: 120"
            • Thickness: 2.42"
              U.S. INDUSTRIAL Initial Pinch Plate Roll USR5375
              $RFQ
              U.S. INDUSTRIAL Initial Pinch Plate Roll USR5375
              CALL FOR AVAILABILITY AND BEST PRICING! STANDARD EQUIPMENT: Powered Roll Adjustment and Manual Precision Pinch Roll Adjustment Top Roll Manual Swingout Emergency Trip Line Pedestal Control Qui
              U.S. INDUSTRIAL Initial Pinch Plate Roll USR630
              $RFQ
              U.S. INDUSTRIAL Initial Pinch Plate Roll USR630
              CALL FOR AVAILABILITY AND BEST PRICING! STANDARD EQUIPMENT: Powered Roll Adjustment and Manual Precision Pinch Roll Adjustment Top Roll Manual Swingout Emergency Trip Line Pedestal Control Qui
              4 Roll CNC Hydraulic Plate Rolls 8' x 3/8"
              $64,000
              4 Roll CNC Hydraulic Plate Rolls 8' x 3/8"
              As well as being reliable, AHS increases productivity with its high speed rolling ability and it overcomes the most challenging bending thanks to its ease of use. Since the plate is pinched during rolling, skidding and s
              • Roll length: 96"
              • Thickness: 0.375"
                Plate Bending Roll
                $RFQ
                Plate Bending Roll
                16 Gauge Plate Bending Roll Manufacturer: The Webb Corporation, Webb City, MO Model: 5096 Serial No.: 5459 Capacity: …8’ Bending Length …16 Gauge Bending Thickness Equipment Location: Gresham, OR Machine is N
                10′ X 1/2″ BERTSCH PLATE ROLLING MACHINE
                $18,000
                10′ X 1/2″ BERTSCH PLATE ROLLING MACHINE
                10′ X 1/2″ BERTSCH PLATE ROLLING BENDING INITIAL PINCH MACHINE Make: BERTSCH Condition: Good All specifications are approximations, and are subject to verification. “On our Floor and ready for inspection.” —
                • Roll length: 120"
                  5' x 10 GA New Dimension Model MP5-135 Initial Pinch Bending Roll
                  $RFQ
                  5' x 10 GA New Dimension Model MP5-135 Initial Pinch Bending Roll
                  S/N: 03061992 EQUIPPED WITH: Electric Foot Control for Forward-Reverse. Manual Roll Adjustment. SPECIFICATIONS: Capacity 5' x 10 GA Roll Length (between bearings) 62" Roll Diameter 5" Surfa
                  • Roll length: 62"
                  • Thickness: 5"
                    22" Cap 12" Width Diacro #2 BENDING ROLL, On Stand
                    $795
                    22" Cap 12" Width Diacro #2 BENDING ROLL, On Stand
                      DIACRO 12" X 22 GA BENDING ROLL MODEL 2       S/N 1-1139   MAX. FORMING WIDTH ............................ 12" MATERIAL THICKNESS CAP. ....................... 22 G
                    16" Cap 6" Width Diacro #1 BENDING ROLL
                    $495
                    16" Cap 6" Width Diacro #1 BENDING ROLL
                      DIACRO 6" X 16 GA BENDING ROLL MODEL 1       S/N 1-1286   MAX. FORMING WIDTH ............................ 6" MATERIAL THICKNESS CAP. ....................... 16 GA.
                    22" Cap 12" Width Diacro #2 BENDING ROLL
                    $795
                    22" Cap 12" Width Diacro #2 BENDING ROLL
                      DIACRO 12" X 22 GA BENDING ROLL MODEL 2       S/N GA-1549   MAX. FORMING WIDTH ............................ 12" MATERIAL THICKNESS CAP. ....................... 22
                    14" Cap 36" Width Roper-Whitney 3416G BENDING ROLL
                    $3,450
                    14" Cap 36" Width Roper-Whitney 3416G BENDING ROLL
                      14 Ga. x 3' PEXTO POWER BENDING ROLL MODEL 3416G     S/N 134-2-80     NEW 1980   LENGTH OF ROLLS ............................ 36" THICKNESS ..................
                    14" Cap 36" Width Pexto 3416G BENDING ROLL
                    $3,450
                    14" Cap 36" Width Pexto 3416G BENDING ROLL
                      14 Ga. x 3' PEXTO POWER BENDING ROLL MODEL 3416G     S/N 132-2-80     NEW 1980   LENGTH OF ROLLS ............................. 36" THICKNESS .................
                    3-Roll Initial Pinch Plate Rolls 3'×10 ga
                    $6,395
                    3-Roll Initial Pinch Plate Rolls 3'×10 ga
                    3 Rolls - Asymmetric initial pinch plate roller ensures excellent results with single operator. It offers full control of each step with the help of the control panel and foot switch. Motors and other electrical equipmen
                    • Roll length: 36"
                      Categories:
                      • X machine tools (148)
                      • X Rolls (148)
                      • X Plate Bending (incl Pinch) Rolls (148)
                      Condition:
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8