buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 161 - 180 of 19661 matches
Sort by:
Items Per Page:  20  |  50 |  100
Clutch Assembly for Amada M-Series Shear *NEW*
$1,750
Clutch Assembly for Amada M-Series Shear *NEW*
Brand new clutch assembly for Amada M-Series Shear. Never used.
Wilton Model 5216001 Radial Arm Drill
$9,950
Wilton Model 5216001 Radial Arm Drill
Spindle Speed 40 to 1920 RPM Spindle Travel 14 9/16" Spindle Taper #5 MT Spindle Feeds .002 to 0.040 IPR Column Diameter 17" Drilling Capacity Steel - 2 1/2", Cast Iron - 2 7/8" Tapping Capacity
  • Arm length: 4'
  • Column diameter: 17"
    Jointer 6" 1hp Mbl Bs Dlta/Rck
    $799
    Jointer 6" 1hp Mbl Bs Dlta/Rck
    Jointer 6" 1hp Mbl Bs Dlta/Rck Model: 37-220 [Delta/Rockwell] S/N: DI6283 6" Jointer w/Mobile Base 1Hp; 1Ph; 120Volt
    Cab Saw 10 2/1 LT w/Incra LS
    $1,999
    Cab Saw 10 2/1 LT w/Incra LS
    Cab Saw 10 2/1 LT w/Incra LS Model: 50-220 [General International] S/N: 52264805 10" Left Tilt w/Incra LS Positioner Fence 2Hp; 1Ph; 110/220Volt
    Shaper 3/1 Seco
    $1,299
    Shaper 3/1 Seco
    Shaper 3/1 Seco Model: SK30SP [Seco] S/N: 8108005 Shaper 3Hp; 1Ph; 220Volt
    2019 Takeuchi TB2150 Excavator w/ (2) Buckets RTR#4033605-01
    $75,000
    2019 Takeuchi TB2150 Excavator w/ (2) Buckets RTR#4033605-01
    Unit located in McKinney, TX. 2019 Takeuchi TB2150 Crawler Excavator w/ (2) Buckets, Hyd Thumb & Blade, Deutz TCD 3.6 L4 Turbo Diesel Engine, Hyd Transmission, Enclosed Cab, Tinted Glass, A/C, Heater, Hour Me
    2012 Amada LC3015-F1 NT , 5x10, 4000 Watt Co2 CNC Laser with Tower FMS
    $RFQ
    2012 Amada LC3015-F1 NT , 5x10, 4000 Watt Co2 CNC Laser with Tower FMS
    Maximum Laser Power 4000 Watts Co2 Table Size
    12" X .200" PA ULTRA MAGNUM SERVO FEEDER
    $RFQ
    12" X .200" PA ULTRA MAGNUM SERVO FEEDER
    ORDER 12 12" MAX WIDTH .020" - .200" THICKNESS0 - 999.99 FEED LENGHTSMAGNUM S
    3000 LB X 15" ROWE COIL CRADLE
    $RFQ
    3000 LB X 15" ROWE COIL CRADLE
    order 3000 3000 LB MAC COIL WEIGHT 15" MAX WIDTH48" ODMANUAL COIL GUIDE ADJUS
    4000 LB X 18" FEED LEASE COIL CRADLE
    $RFQ
    4000 LB X 18" FEED LEASE COIL CRADLE
    ORDER 4000 18" MAX WIDTH 48" ODFORWARD REVERSEMANUAL COIL GUIDE ADJU
    3000 LB X 20" ROWE COIL CRADLE
    $RFQ
    3000 LB X 20" ROWE COIL CRADLE
    order 3000 3000 LB MAC COIL WEIGHT 20" MAX WIDTH48" ODMANUAL COIL GUIDE ADJUS
    2012 - 1800 Watt Mazak STX-510 CNC CO2 Laser
    $RFQ
    2012 - 1800 Watt Mazak STX-510 CNC CO2 Laser
    Resonator Wattage 1.800 Watts Max Sheet Size 5' x 10' Table Load Capacity 1,254 lbs. X Axis Travel 120.9" Y Axis Travel 60.8" Z Axis Travel 3.5" Equipped with: Mazatrol Preview Control Si
    • Wattage: 1800W
    • X axis travel: 10'
      1" x 168" Blue Valley #10 Dished Head Flanger, Excellent! Tooling
      $RFQ
      1" x 168" Blue Valley #10 Dished Head Flanger, Excellent! Tooling
      . We are pleased to offer for your consideration: (1) 1" x 168" Blue Valley Dished Head Flanger Stock Number: 13919 Price: On Request Manufacturer: Blue Valley Model Number: #10 Serial Number: 10
      • Thickness: 1"
        DOOSAN PUMA TT1800SY CNC LATHE NEW: 2017 | IH
        $RFQ
        DOOSAN PUMA TT1800SY CNC LATHE NEW: 2017 | IH
        Specifications: TRAVELS -X AXIS: 6.5” -X2 AXIS: 7.5” -Y AXIS: 3.9” -Z AXIS: 27.6” -Z2 AXIS: 28.3” -B AXIS (SUB SPINDLE): 30.3” -C1/C2 AXIS INDEX: 0.001DEG RAPID TRAVERSE RATES(X/Y/Z): 787/295/787 IPM # AXIS :
        • Swing: 9.1"
        • Centers: 27.6"
          HAAS VF-11/50 CNC VERTICAL MACHINING CENTER NEW: 2014 | AG
          $RFQ
          HAAS VF-11/50 CNC VERTICAL MACHINING CENTER NEW: 2014 | AG
          Specifications: TRAVELS -X AXIS: 120" -Y AXIS: 40" -Z AXIS: 30" TABLE SIZE: 120" X 28" TABLE CAPACITY: 4,000 LBS SPINDLE TAPER: 50 TAPER SPINDLE SPEEDS: 10000 RPM RAPID TRAVERSE RATE (
          • X axis: 120"
          • Y axis: 40"
            Hardinge GX 1600 Vert Mach Cntr, 67" x 27.6" tbl, XYZ=63/27.5/25&
            $RFQ
            Hardinge GX 1600 Vert Mach Cntr, 67" x 27.6" tbl, XYZ=63/27.5/25&
            HARDINGE BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER Model GX 1600, S/N GXEB2D0008, New 2012 Stock # Q11748 EQUIPPED WITH: Fanuc 0i-MD CNC Control, (2) Chillers, Chip Conveyor & Coolant System. SPECIFIC
            • X axis: 62.99"
            • Y axis: 27.55"
              DMG MORI NLX 2500Y/700 CNC LATHE WITH 3-AXIS OR MORE NEW: 2015
              $RFQ
              DMG MORI NLX 2500Y/700 CNC LATHE WITH 3-AXIS OR MORE NEW: 2015
              SPECS: SWING OVER BED:36.4" TURNING DIAMETER:14.4" TURNING LENGTH:27.7" CHUCK SIZE 10" SPINDLE NOSE: A2 - 8" SPINDLE BORE DIAMETER 1:3.5" BAR CAPACITY: 3" SPINDLE SPEEDS:4000 R
              • Swing: 36.4"
              • Centers: 27.7"
                Mitsubishi MD+PRO II CNC Wire EDM, Model BA8, 31" x23" x18.5&
                $RFQ
                Mitsubishi MD+PRO II CNC Wire EDM, Model BA8, 31" x23" x18.5&
                MITSUBISHI MD+PRO II CNC WIRE EDM Model BA8, S/N 57DB8095, New 2007 Stock # Q11773 EQUIPPED WITH: Mitsubishi V350 CNC Control (PC Based), Automatic Wire Threading, Submerged Machining, Linear Guide Ways. SPECIFI
                • X axis travel: 12.6"
                • Y axis travel: 9.8"
                  WISCONSIN 500 F GAS WALK IN OVEN 6'W 8'L 6'H
                  $RFQ
                  WISCONSIN 500 F GAS WALK IN OVEN 6'W 8'L 6'H
                  DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEAT (400,000 BTU/HR MAX.) IS SUPPLIED BY A BURNER FIRING INTO CHAMBER ABOVE WORK AREA. HEATED AIR IS CIRCULATED BY ROOF MOUNTED FAN (5 HP, 4500 CFM) AND ENTERS WORK AREA VIA D
                  • Chamber width: 72"
                  • Chamber length: 96"
                    WISCONSIN 500 F GAS WALK IN OVEN 8'W 20'L 9'H
                    $RFQ
                    WISCONSIN 500 F GAS WALK IN OVEN 8'W 20'L 9'H
                    DOUBLE DOOR OPENING AT BOTH FRONT AND REAR WITH PRESSURE TYPE LATCHES. HEAT (1,000,000 BTU/HR. MAX) IS SUPPLIED BY A GAS FIRED BURNER FIRING INTO COMBUSTION CHAMBER ABOVE THE WORK AREA. HEATED AIR WHICH IS CIRCULATED BY
                    • Chamber width: 96"
                    • Chamber length: 230"
                      Categories:
                      Condition:
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>