buy & sell, new & used machinery, machine tools & equipment

<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1301 - 1400 of 21280 matches
Sort by:
Items Per Page:  20 |  50 |  100
29" x 8" Brand New Knuth Radial Drill, Mdl. SBF 40 TV 1000, Thread cutting funct
$RFQ
29" x 8" Brand New Knuth Radial Drill, Mdl. SBF 40 TV 1000, Thread cutting funct
NOTE REPLACEMENT COST IS $8,700  Table Set Up Area 29 In X 8 In Table Load Capacity (max.) 220 LBS Number Of Table T-slots 3 positions T-slot Table (width X Spacing) 0.55 In X 2.48 In T-slot Foot (
8" X 32" Brand New Knuth Radial Drill, Mdl. R 80 VT PRO, Touchscreen control pan
$RFQ
8" X 32" Brand New Knuth Radial Drill, Mdl. R 80 VT PRO, Touchscreen control pan
Drilling Capacity 3.15 In Drilling Capacity Cast Iron (In.) 4.13 In Tapping Capacity (Cast Iron) M 60 Tapping Capacity (Steel/ Casting) M 52 Drilling Depth 16 in Throat 18 In - 100 In Spindle Nose t
10" x 36" Brand New Knuth Radial Drill, Mdl. R 40 V, Coolant System, Cube Table,
$RFQ
10" x 36" Brand New Knuth Radial Drill, Mdl. R 40 V, Coolant System, Cube Table,
NOTE REPLACEMENT COST IS $8,700  Drilling Capacity 1.57 In Tapping Capacity, Cast-iron M 40 Tapping Capacity, Steel M 32 Drilling Depth (Max.) 10 in Machine Table Dimensions 81 In X 36 In X 7 In
59.06" X 23" Brand New Knuth Vertical CNC Lathe, Mdl. V-Turn 410/1500, 3-axis po
$RFQ
59.06" X 23" Brand New Knuth Vertical CNC Lathe, Mdl. V-Turn 410/1500, 3-axis po
Center Width 59.06 In Center Height 8 In Turning Diameter Over Bed 15 IN Turning Diameter Over Gap Bridge 23 In Turning-Ø Over Support 10 in Gap Bridge Length 10 in Bed Width 10 in Travel X-
20 " x 17" Brand New Knuth Drill, Mdl. SSB 32 Xn, Digital Speed Indicator, Threa
$RFQ
20 " x 17" Brand New Knuth Drill, Mdl. SSB 32 Xn, Digital Speed Indicator, Threa
NOTE REPLACEMENT COST IS $8,700  Drilling Capacity 1.26 In Tapping Capacity In Steel M 20 Table Set Up Area 20 In X 17 In Manual Table Travel 19.29 In Quill Stroke 6 in Table Swivel Range (max.)
8" x 13" Brand New Knuth Fully Automatic Horizontal Band Saw, Mdl. ABS 320 PLC,
$RFQ
8" x 13" Brand New Knuth Fully Automatic Horizontal Band Saw, Mdl. ABS 320 PLC,
Cutting capacity 0° (round) 13 in Cutting capacity 0° (square) 12 in Cutting Capacity 0° (flat) (length X Width) 13 In X 12 In Cutting Speed 65.4 Fpm - 327 Fpm Working Height 25 in Motor
31" X 12" Brand New Knuth Lathe, Mdl. Basic Plus, 3-axis position indicator, X.p
$RFQ
31" X 12" Brand New Knuth Lathe, Mdl. Basic Plus, 3-axis position indicator, X.p
Center Width 31.89 In Center Height 12 in Turning Diameter Over Bed 7 In Turning Diameter Over Gap Bridge 7 In Turning-Ø Over Support 6.1 In Gap Bridge Length 4 In Bed Width ± 60°
21" x 17" Brand New Knuth Drill, Mdl. SSB 40 F Super, Digital Speed Indicator, T
$RFQ
21" x 17" Brand New Knuth Drill, Mdl. SSB 40 F Super, Digital Speed Indicator, T
   Drilling Capacity 1.57 In Tapping Capacity In Steel M24 Table Set Up Area 21 In X 17 In Manual Table Travel 21.65 In Quill Stroke 7 In Table Swivel Range (max.) ± 45° Spindl
21" x 17" Brand New Knuth Drill, Mdl. SSB 40 Xn, Digital Speed Indicator, Thread
$RFQ
21" x 17" Brand New Knuth Drill, Mdl. SSB 40 Xn, Digital Speed Indicator, Thread
   Drilling Capacity 1.57 In Tapping Capacity In Steel M24 Table Set Up Area 21 In X 17 In Manual Table Travel 21.65 In Quill Stroke 7 In Table Swivel Range (max.) ± 45° Spindl
14 " x 13" Brand New Knuth Fully Automatic Horizontal Band Saw, Mdl. ABS 330 L,
$RFQ
14 " x 13" Brand New Knuth Fully Automatic Horizontal Band Saw, Mdl. ABS 330 L,
Cutting Capacity 0° (flat) (length X Width) 14 In X 13 In Cutting capacity 0° (round) 13 in Cutting capacity 0° (square) 13 in Cutting Speed Infinitely Variable 65 Fpm - 327 Fpm Stop Length
20" x 28" Brand New Knuth Vertical CNC Lathe, Mdl. VDL-800, Siemens 808 D Contro
$RFQ
20" x 28" Brand New Knuth Vertical CNC Lathe, Mdl. VDL-800, Siemens 808 D Contro
Working Area Turning Diameter Over Bed 31" Maximum Rotating Diameter 28" Workpiece Weight 1320 lbs Maximum Travel X Axis Travel 20" Z Axis Travel 28" W-Axis Travel 20" Swivel Range of Upper
20" Used Johnson Vertical Bandsaw with Power Table Feed, Mdl. V-20, Blade Welder, Dia
$7,950
20" Used Johnson Vertical Bandsaw with Power Table Feed, Mdl. V-20, Blade Welder, Dia
Throat Capacity 20" Blade Length 147" - 154" Voltage 220/440 V AC / 3 PH Blade Welder Power Table Feed Made In Japan Grinder High & Low Transmission Dial Speed Indicator Rip Fence
20" x 72" Used LeBlond Regal Geared Head Lathe, Mdl. Regal 20", 15" 4
$12,500
20" x 72" Used LeBlond Regal Geared Head Lathe, Mdl. Regal 20", 15" 4
Swong Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-1 Hole Thru Spindle 2" Threads: Inch (48) 2-112 TPI Feeds (48) .0023" - .132" Cross Slide
19" x 72" Used LeBlond Regal Engine Lathe, Mdl. Regal 19", Thread Dial, Tai
$12,500
19" x 72" Used LeBlond Regal Engine Lathe, Mdl. Regal 19", Thread Dial, Tai
Swing Over Cross Slide 12" Distance Between Centers 72" Spindle Speeds (12) 25 - 1,500 RPM Spindle Nose L-2 Hole Thru Spindle 1-3/4" Threads: Inch (48) 2- 112 TPI Feeds (48) 0.0018"- 0.104" C
15" x 54" Used LeBlond Makino Engine Lathe, Mdl. REGAL SERVO SHIFT, 3 Jaw Chuck,
$10,500
15" x 54" Used LeBlond Makino Engine Lathe, Mdl. REGAL SERVO SHIFT, 3 Jaw Chuck,
Swong Over Cross Slide 9 1/2" Cross Slide Travel 8 7/8" Distance Between Centers 54" Spindle Speeds (12) 45-1800 RPM Spindle Nose D1-6 Threads: Inch (48) 2-112 TPI Metric (40) 0.25-14 MM Feeds (4
15" x 54" Used Leblond Geared Head Lathe, Mdl. 15" REGAL, 3 Jaw Chuck, Tape
$8,750
15" x 54" Used Leblond Geared Head Lathe, Mdl. 15" REGAL, 3 Jaw Chuck, Tape
Swing Over Cross Slide 9-1/2" Distance Between Center 54" Hole Thru Spindle 1-17/32" Spindle Nose L-0 Spindle Speeds 30 - 1,800 RPM Tailstock Spindle Travel 5" Compound Rest Travel 3-7/8" Bed Wid
39" x 168" Used Heavy Duty Leblond Engine Lathe, Mdl. 25" Raised, 36"
$39,500
39" x 168" Used Heavy Duty Leblond Engine Lathe, Mdl. 25" Raised, 36"
Swing Over Bed 39" Swing Over Cross Slide 28" Swing 25" Distance Between Centers 168" Threads (Inch) 1-7/16" - 46" Spindle Speeds 3 - 625 RPM Spindle Bore 3" WEIGHT Approx. 25,000# Dimensions
30 H.P. Used Leroi Horizontal Air Compressor Piston Type with Horizontal Tank, Mdl. Model
$3,750
30 H.P. Used Leroi Horizontal Air Compressor Piston Type with Horizontal Tank, Mdl. Model
Horsepower 30 H.P. Capacity 125 PSI None
37" Used Libert C-Frame High Speed Shear, Nibbler, Circle Shear, Mdl. 1276, #A6880
$4,950
37" Used Libert C-Frame High Speed Shear, Nibbler, Circle Shear, Mdl. 1276, #A6880
Depth of Throat 37" Voltage 230 V 1 Phase None
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
$150
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
Capacity 500 Lbs. Table Size 30" x 20" Lift Height 18" WEIGHT 150 LBS. Floor Lock Casters
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
$150
500 Lbs. Used Lexco Hydraulic Lift Table, Mdl. HT- 500- FR, 30"x 20" Table, 18&q
Capacity 500 Lbs. Table Size 30" x 20" Lift Height 18" WEIGHT 150 LBS. Floor Lock Casters
37" Used Libert C-Frame High Speed Shear, Nibbler, Stripper, Mdl. 1276, #A6902
$4,950
37" Used Libert C-Frame High Speed Shear, Nibbler, Stripper, Mdl. 1276, #A6902
Depth of Throat 37" Voltage 440v 3-Phase None
7 Drawers Lista International Heavy Duty Cabinet, #A2159
$950
7 Drawers Lista International Heavy Duty Cabinet, #A2159
Drawers 7 2 5 3/4" 3 7 3/4" 1 10" None
6 stand x 22 Ga Used Lockformer Cliproll, Mdl. Cliproll 1 1/8, #A7179
$2,250
6 stand x 22 Ga Used Lockformer Cliproll, Mdl. Cliproll 1 1/8, #A7179
Capacity 22 GA. Stands 6 Stands Type Cliproll Horsepower 2 H.P Spindle Diameter 7/8" None
5 Stand x 22Ga Used Lockformer , Mdl. -, #A7234
$1,950
5 Stand x 22Ga Used Lockformer , Mdl. -, #A7234
Capacity 22 GA. Stands 5 Stands Forming Speed 100 FPM Horsepower 2 H.P. Voltage 110-115V ~ 1 Phase WEIGHT 750 Lbs. Spindle Diameter 7/8" None
440 Ton x 14' Used LVD Hydraulic Press Brake, Mdl. PPN400/4500, Lower Die Holder, 48"
$30,000
440 Ton x 14' Used LVD Hydraulic Press Brake, Mdl. PPN400/4500, Lower Die Holder, 48"
Tonnage 440 Ton Distance Between Housing 148" Bed Width 9.8" Shut Height 21.65" Throat 11.8" Ram Speed: Rapid Approach 188 IPM Pressing 21.5 IPM Safety Curtains No Backgauge Yes Back Ga
135 Tons Used Spartan/Marvel Hydraulic Ironworker, Dual Operation HEAVY DUTY Machine, Mdl.
$43,500
135 Tons Used Spartan/Marvel Hydraulic Ironworker, Dual Operation HEAVY DUTY Machine, Mdl.
      Capacity 135 Ton Angle (L1) 6" Angle (L2) 6" Angle (T) 0.6875" Throat 20" Stroke 3.9375" Dimension 98"L X 35"W X 73"H WEIGHT 8710 (LBS) Material Stops Foot
18" Used Marvel Vertical Bandsaw (Tilt Frame), Mdl. SERIES 8 MARK II, Manual Vise, Ma
$19,500
18" Used Marvel Vertical Bandsaw (Tilt Frame), Mdl. SERIES 8 MARK II, Manual Vise, Ma
Throat 18" Max. Work Height 22" Capacity @ 45 Degrees 18" x 12-3/4" Work Surface Of Table 33" x 24" Blade Speed (Variable) 50 - 450 FPM Power Feed Stroke 1" - 18" Power Feed Force 0 - 140 LBF WEI
13" x 14" Used Marvel Spartan Horizontal Fully Automatic Bandsaw With Feeder (He
$28,500
13" x 14" Used Marvel Spartan Horizontal Fully Automatic Bandsaw With Feeder (He
Round Cutting Capacity 13" Rectangle Cutting Capacity 13” X 14” Saw Blade Dimensions :13’6” X 1.25” X .042" Blade Speeds 60-330 SFPM Hydraulic Pump 1 HP Coolant Pump 1/8 H
30" x 118" Used Mazak Heavy Duty Oil Country Lathe With 12-1/2" Hole Thru S
$67,500
30" x 118" Used Mazak Heavy Duty Oil Country Lathe With 12-1/2" Hole Thru S
Capacity 30" x 118" Swing Over The Bed 30" Distance Between Centers 118" Swing Over Cross Slide 20-3/4" Hole Thru Spindle 12-1/2" Spindle Nose A2-20 Spindle Speeds 5 to 300 RPM Spindle Taper #6 M
6' x 12' Used Mitsubishi Suprema Waterjet Cutting System with Closed Loop Water Circulatio
$77,500
6' x 12' Used Mitsubishi Suprema Waterjet Cutting System with Closed Loop Water Circulatio
Table Width 6' Table Length 12' Pump 60 HP Max Cutting Pressure 60,000 PSI Power Requirement 480/3/60 X-Axis Travel 72" Y-Axis Travel 144" Z-Axis Travel 6" WEIGHT 25,000 LBS Horsepower 50 H
27" X 6" Used Mitutoyo Optical Comparator, Mdl. PH361, Metronics (Quadra-Chek) D
$450
27" X 6" Used Mitutoyo Optical Comparator, Mdl. PH361, Metronics (Quadra-Chek) D
Table Capacity 27'' X 6'' Voltage 110/220v, 1 Ph Metronics (Quadra-Chek) Dro
1-1/4" Used Mitts & Merrill Hydraulic Key Seater, Mdl. 2HYDKS, Tooling, No Pit Requir
$24,500
1-1/4" Used Mitts & Merrill Hydraulic Key Seater, Mdl. 2HYDKS, Tooling, No Pit Requir
Maximum Length Keyway 12" Maximum Width Keyway 1-1/4" Largest Standard Post 2-3/8" Height Floor To Table 40-5/8" Floor Space 52" X 23" Depth of Pit None Cutting Speed (Variable) 4.0 - 29.0 FPM Re
17" x 36" Used Mori Seiki Heavy Duty Gap Bed Engine Lathe, Mdl. MS-850G, Trav-A-
$RFQ
17" x 36" Used Mori Seiki Heavy Duty Gap Bed Engine Lathe, Mdl. MS-850G, Trav-A-
Capacity 17” X 36” Swing Over Cross Slide 9-3/4" Distance Between Centers 32" Spindle Speeds (12) 32 -1,800 RPM Spindle Nose A1-6 Thread: Inch (40) 4-80 TPI Feeds (40) 0.0018" - 0.02
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, Punch Attachment, Coper Notcher, Sh
$8,500
55 Ton Used Mubea Mechanical Ironworker, Mdl. KBL-1/2, Punch Attachment, Coper Notcher, Sh
Capacity 55 Ton Hole 1" Through 7/16" 45 Degrees 3 1/2" x 3/8" Angle Shear: Square 4" x 1/2" Throat 15 3/4" Flat Bars 6" x 5/8" Coper- Notcher: Plates 7/16" Punch Capacity: Tonnage 55 Ton Bar
40" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
$2,250
40" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
Available in the following size travels:6" x 40"8" x 40"10" x 40" DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spherosyn 2G On Cross Slides With 12" Of
12" X 24" X 6" Brand New 3 Axis Newall Digital Readout System Package for V
$2,290
12" X 24" X 6" Brand New 3 Axis Newall Digital Readout System Package for V
Available in the following size travels:12" x 24" x 16" (3 Axis Knee)12" x 30" x 16" (3 Axis Knee)12" x 36" x 16" (3 Axis Knee)16" x 30" x 16" (3 Axis Knee)16" x 36" x 16" (3 Axis Knee)16" x 40" x 16" (3 Axis Knee)12" x
80" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
$3,223
80" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
Available in the following size travels:8" x 80"10" x 80"12" x 80"14" x 80" DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spherosyn 2G On Cross Slides W
60" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
$3,792
60" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
Available in the following size travels:6" x 60"8" x 60"10" x 60"12" x 60"14" x 60"     DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under
50" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
$2,403
50" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digital
Available in the following size travels:6" X 50"8" X 50"10" X 50"    DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spherosyn 2G On Cross
72" Brand New Newall 2 Axis Digital Readout Lathe Packages Lathe Packages, Mdl. DP700
$2,993
72" Brand New Newall 2 Axis Digital Readout Lathe Packages Lathe Packages, Mdl. DP700
Available in the following size travels:8" x 72"10" x 72"12" x 72"14" x 72"     DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Sphero
18 Ga. x 42" Used Niagara Powered Plate Bending Roll, Mdl. 341-P-Roll, #A7452
$RFQ
18 Ga. x 42" Used Niagara Powered Plate Bending Roll, Mdl. 341-P-Roll, #A7452
Wire Grooves (3) 3/8", 1/2", 5/8" Diameter of Rolls 3" Gear Ratio 4:1 None
120" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digita
$4,399
120" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digita
Available in the following size travels:12" x 120"14" x 120"16" x 120"20" x 120" DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spherosyn 2G On Cross Sli
100" Brand New Newall 2 Axis Digital Readout Lathe Packages Lathe Packages, Mdl. DP70
$3,843
100" Brand New Newall 2 Axis Digital Readout Lathe Packages Lathe Packages, Mdl. DP70
Available in the following size travels:10" X 100"12" X 100"14" X 100" DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spherosyn 2G On Cross Slides With 1
160" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digita
$5,386
160" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digita
Available in the following size travels:12" X 160"14" X 160"16" X 160"18" X 160"20" X 160"22" X 160" DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spher
200" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digita
$6,754
200" Brand New Newall 2 Axis Digital Readout Lathe Packages, Mdl. DP700, DP700 Digita
Available in the following size travels:12" x 200"14" x 200"16" x 200"18" x 200"20" x 200"22" x 200"  DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Un
240" Brand New Newall 2 Axis Digital Readout Lathe Packages Lathe Packages, Mdl. DP70
$7,210
240" Brand New Newall 2 Axis Digital Readout Lathe Packages Lathe Packages, Mdl. DP70
Available in the following size travels:14" x 240"16" x 240"18" x 240"20" x 240"22" x 240" DP700 Digital Readout Display 2 Axis Microsyn 2G 10µm On Cross Slides With 10" Of Travel And Under Spherosyn 2G On
Brand New 2 Axis Newall Digital Readout System Package for Vertical and Horizontal Milling
$2,605
Brand New 2 Axis Newall Digital Readout System Package for Vertical and Horizontal Milling
Available in the following size travels:12" x 30"12" x 36"16" x 30"16" x 36"16" x 40" Mounting Bolt M10 WEIGHT 3.3 Lbs. 2 Axis DP700 DRO Display Spherosyn 2G Reader Heads Spherosyn 2G Scales Scale S
4' x 8' Used Omax CNC Waterjet Cutting Machine ONLY 1800 HOURS, Mdl. 55100, Omax Standard
$RFQ
4' x 8' Used Omax CNC Waterjet Cutting Machine ONLY 1800 HOURS, Mdl. 55100, Omax Standard
Material Support Slats 4" x 1/8" Galvanized Steel Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter) Electrical Requirements 3-Phase, 380-480 VAC ±10%, 50-60 Hz Noise Level Below 80 dBA a
6'8" x 13'4" Used Omax Waterjet Cutting Machine ONLY 1,200 HOURS! Put into Place
$RFQ
6'8" x 13'4" Used Omax Waterjet Cutting Machine ONLY 1,200 HOURS! Put into Place
Are you looking for a waterjet machine that will increase your profits? Omax is the answer. The OMAX 80X Series are bridge-style waterjet machines that come with many features, including IntelliTRAX, which maximizes tim
100 Ton x 18" Brand New Pacific Press Eco-Former Series Heavy Duty C-Frame Press, Mdl
$255,870
100 Ton x 18" Brand New Pacific Press Eco-Former Series Heavy Duty C-Frame Press, Mdl
Capacity 100 Ton Punching Capacity 50 Ton Stroke 18" Closed Height 5" Throat Depth 10" Tool Holder 15" x 15" Bed 35" x 18" Bed Height 34" Distance Between Housings 23" Rapid Advance 332 IPM
200 Ton x 18" Brand New Pacific Press Eco-Former Series Heavy Duty C-Frame Press, Mdl
$265,750
200 Ton x 18" Brand New Pacific Press Eco-Former Series Heavy Duty C-Frame Press, Mdl
Capacity 200 Ton Punching Capacity 100 Ton Stroke 18" Closed Height 5" Throat Depth 13" Tool Holder 20" x 20" Bed 41" x 24" Bed Height 37" Distance Between Housings 27" Rapid Advance 250 IP
1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Du
$RFQ
1,000 Ton x 22'/26' Used Pacific (Tandem) CNC Hydraulic Press Brake, Mdl. FK1000-26/22, Du
Dual Palm Pedestal Control Tooling DNC 80 CNC Controller
300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A43
$29,500
300 Ton x 14' Used Pacific Heavy Duty Hydraulic Press Brake, Mdl. 300-14, Foot Pedal, #A43
Tonnage 300 Ton Distance Between Housings 149" Throat 10" Shut Height 18" Equipped With Backgauge No Safety Curtains No Type Hydraulic Bed Width 8" Horsepower 30 H.P. Voltage 220/440V ~
8' Used P & J Power Bending Plate Metal Sheet Rolls, Mdl. -, Emergency Cable Stop, Air Dro
$17,500
8' Used P & J Power Bending Plate Metal Sheet Rolls, Mdl. -, Emergency Cable Stop, Air Dro
Foot Pedal Emergency Stop Air Drop End Emergency Cable Stop
135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10,
$14,500
135 Ton x 10' Used Pacific Hydraulic Press Brake "American Made", Mdl. J135-10,
Capacity 135 Ton x 10' Distance Between Housings 102" Throat Depth 7" Tonnage 135 Ton Bed Height 35" Shut Height 5" Bed Width 8" Pit Required No Backgauge Yes CNC Controller Automec CNC
300 Ton x 18" Brand New Pacific Press Eco-Former Series Heavy Duty C-Frame Press, Mdl
$RFQ
300 Ton x 18" Brand New Pacific Press Eco-Former Series Heavy Duty C-Frame Press, Mdl
Capacity 300 Ton Punching Capacity 150 Ton Stroke 18" Closed Height 6" Throat Depth 16" Tool Holder 24" x 24" Bed 50" x 28" Bed Height 45" Distance Between Housings 34" Rapid Advance 198 IP
400 Tons x 26' Used Pacific Hydraulic Press Brake ( Located White City, OR), Mdl. K400-26,
$80,000
400 Tons x 26' Used Pacific Hydraulic Press Brake ( Located White City, OR), Mdl. K400-26,
Capacity 400 Ton x 26' Distance Betweeen Housings 23' Max Full Length Bending 1/4" x 24' Closed Height 10" Throat Depth 14" Foot and hand controls Yes None
21.5'' x 29.75'' Used Pangborn Roto-Blast Pass Thru Sandblaster ROTO-BLAST (SAND BLASTER)
$129,500
21.5'' x 29.75'' Used Pangborn Roto-Blast Pass Thru Sandblaster ROTO-BLAST (SAND BLASTER)
Operation Performed Descale To A Near White Metal Finish (SSPC-10) Production Rate Structural Shapes 2-6FPM Production Rate Plate And Flat Bar 6-12FPM Rotoblast Units (4) 140DD - 2 Rim Loc 100 Total Hp Ab
26" x 44" Used Peterson Valve Guide & Seat Machine (Sold As Is), Mdl. TCM-25, 1
$1,500
26" x 44" Used Peterson Valve Guide & Seat Machine (Sold As Is), Mdl. TCM-25, 1
Table Length 44" Table Height 26" Column Diameter 21" Table Traverse 47.3 Spindle 3 MT Spindle Travel 7" Max. Table To Spindle 36" Gear Head Speed 8 Speed Speed 74 - 1,134 Rpm 1 Hp
16 Ga. x 4' Used Pexto Plate Bending Roll, Mdl. 3418, Manual Rear Roll Adjustment, Manual
$RFQ
16 Ga. x 4' Used Pexto Plate Bending Roll, Mdl. 3418, Manual Rear Roll Adjustment, Manual
Max. Working Length 48" Roll Diameter 3" Roll Speed 26 RPM Dimensions (L x D x H) 75" x 27" x 44" WEIGHT 1,250 Lbs. Horsepower: 3/4 Electric Foot Pedal Manual Rear Roll Adjustment Manual Drop E
20 Ga. x 42" Used Pexto Powered Circle Shear, Mdl. 299-C, #A7460
$RFQ
20 Ga. x 42" Used Pexto Powered Circle Shear, Mdl. 299-C, #A7460
HEIGHT 23 1/2” Length 82” Width 21” Capacity, Mild Steel 20 Ga. Diameter of Cutters 1 5/8” Diameter Of Clamping Discs 2 1/4” Depth Of Cutting Head To Gauge 9 1/8”
50 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-50, Flat Shear Station, Hold Down As
$15,995
50 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-50, Flat Shear Station, Hold Down As
Why Buy A Piranha P-50 IronworkerPiranha P-50 ironworker machines are the entry-level of the iconic line of Piranha hydraulic ironworker machines, but they don’t lack the toughness and precision expected from
65 TON Brand New Piranha Hydraulic Ironworker, Mdl. P-65, Complete Punching Attachment wit
$27,995
65 TON Brand New Piranha Hydraulic Ironworker, Mdl. P-65, Complete Punching Attachment wit
Piranha P-65 IronworkerThe Piranha Model P-65 is Piranha’s most popular model of ironworker.The P-65 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shea
90 TON Brand New Piranha Hydraulic Ironworker, Mdl. P90, Automatic Hold Down, Punch Holder
$37,995
90 TON Brand New Piranha Hydraulic Ironworker, Mdl. P90, Automatic Hold Down, Punch Holder
Tonnage 90 Ton Punch Hole Size (Max. Material) 1-1/8" (1") Max. Hole Size (Material) 5"(3/16") Throat Depth 10" Round Bar Shear 1/2" To 2" Square Bar Shear 1/2" to 1-3/8" Closed Height w/o Die B
110 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-110, Complete Punching Attachment W
$43,995
110 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-110, Complete Punching Attachment W
Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion.  The shorter required stroke gives you a faster punching cycle.Automatic Urethane Hold-downs- clamp
140 Ton Brand New Piranha Hydraulic Dual Operational Ironworker , Mdl. PII-140, Automatic
$88,995
140 Ton Brand New Piranha Hydraulic Dual Operational Ironworker , Mdl. PII-140, Automatic
Mechanical Stripper Attachment- keeps material flat through the punching process, eliminating distortion.  The shorter required stroke gives you a faster punching cycle.Automatic Urethane Hold-downs- cla
5/16" x 10' Brand New Piranha CNC Hydraulic Shear, Mdl. 5/16-10, CNC BLADE GAP ADJUST
$65,900
5/16" x 10' Brand New Piranha CNC Hydraulic Shear, Mdl. 5/16-10, CNC BLADE GAP ADJUST
Capacity 5/16" x 10' Stainless Steel 1/8" Blade Length 120" Rake Angle 0.5-2 Full Strokes - No Load 8 Number of Hold Down Pins 16 Power Backgauge 39" CNC Controller Delem DAC 360 Hydraulic Oil
140 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-140, Complete Punching Attachment W
$49,995
140 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-140, Complete Punching Attachment W
140 Ton Brand New Piranha Hydraulic Ironworker, Mdl. P-140, Complete Punching Attachment With Split Dove Tail Mounting, Punch Holder, Stripper, & Die Block, 5 Punch & Die Sets 9/16” Through 1-1/16”,
140 Tons Used Piranha Hydraulic Heavy Duty Dual Operation Ironworker , Mdl. PII-140, Joyst
$49,500
140 Tons Used Piranha Hydraulic Heavy Duty Dual Operation Ironworker , Mdl. PII-140, Joyst
The Dual Operator Piranha PII-140 allows for simultaneous operation of the punch station and shear/coper-notcher stations. One of the most powerful ironworkers on the market, providing enough punching force for any appl
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
$50
12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
Stroke 12 Ton None
1" x 10' Used Pope Plate Roll, Mdl. PR-101000-4, 3 Roll Drive, 2 Driven Rolls, Epicyc
$37,500
1" x 10' Used Pope Plate Roll, Mdl. PR-101000-4, 3 Roll Drive, 2 Driven Rolls, Epicyc
Capacity 1" x 120" Rolling Capacity (Mild Steel) 1" Dimensions (L x W x H) 86" X 92" X 242" Voltage 220/440V ~ 3 Phase 3 Roll Drive 2 Driven Rolls Power Adjusted Forming Roll Safety System
42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1,
$49,500
42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1,
Capacity 42"/49" x 172" Spindle Nose A1 - 11 Cross Slide Travel 23-1/2" Spindle Speeds (21) 6.3 - 630 RPM Hole Thru Spindle 4-3/4" Distance Between Centers 172" Swing Over Cross Slide 26-3/4" Swi
70 Ton x 6' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S70B6, Flush Floor M
$52,699
70 Ton x 6' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S70B6, Flush Floor M
Operation Type CNC Control Bending Length 82.71" Distance Between Columns 63.02" Stroke 10.24" Throat 15.75" Table Height 34.27" Back Gauge Speed . X Axis Speed 23.63 in/sec X. Axis Speed 23.6
110 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S110B10, Flush Flo
$60,600
110 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S110B10, Flush Flo
Operation Type CNC Control Bending Length 122.10" Distance Between Columns 102.40" Stroke 10.24" Throat 15.75" Table Height 35.45" Back Gauge Speed . X Axis Speed 23.63 in/sec X. Axis Speed 23
350 Ton x 12' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S350B12, Flush Flo
$112,750
350 Ton x 12' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S350B12, Flush Flo
Operation Type CNC Control Bending Length 122.10" Distance Between Columns 102.40" Stroke 10.24" Throat 15.75" Table Height 36.63" Back Gauge Speed . X Axis Speed 23.63 in/sec X. Axis Speed 23
110 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S110C10, Flush Flo
$RFQ
110 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S110C10, Flush Flo
Operation Type CNC Control Crowning Manual Bending Length 122.10" Distance Between Columns 102.40" Stroke 12.20" Throat 19.68" Table Height 35.45" Back Gauge Speed . X Axis Speed 23.63 in/sec
70 Ton x 8' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S70C8, Flush Floor M
$72,750
70 Ton x 8' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S70C8, Flush Floor M
Operation Type CNC Control Crowning Manual Bending Length 102.40" Distance Between Columns 84.68" Stroke 12.20" Throat 19.68" Table Height 34.66" Back Gauge Speed . X Axis Speed 23.63 in/sec
250 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250C10, Flush Flo
$89,426
250 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250C10, Flush Flo
Operation Type CNC Control Crowning Manual Bending Length 122.10" Distance Between Columns 102.40" Stroke 12.20" Throat 19.68" Table Height 36.63" Back Gauge Speed . X Axis Speed 23.63 in/sec
350 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S350C10, Flush Flo
$103,688
350 Ton x 10' Brand New Comeq Primeline CNC Hydraulic Press Brake, Mdl. S350C10, Flush Flo
Operation Type CNC Control Crowning Manual Bending Length 122.10" Distance Between Columns 102.40" Stroke 12.20" Throat 19.68" Table Height 38.20" Back Gauge Speed . X Axis Speed 23.63 in/sec
250 Ton x 12' Used Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250B12, Cybelec ModEva
$79,500
250 Ton x 12' Used Comeq Primeline CNC Hydraulic Press Brake, Mdl. S250B12, Cybelec ModEva
Working Length 145.73” Distance Between Housings 126.03” Adjustable Stroke 10.24” Maximum Open Height 18.31" Throat 15.75” Motor 25 Quick Approach 5.67"/Second Bending 0.4
1/4" x 10' Brand New Comeq Primeline CNC Variable Rake Angle Hydraulic Guillotine She
$41,545
1/4" x 10' Brand New Comeq Primeline CNC Variable Rake Angle Hydraulic Guillotine She
Capacity 0.250" x 122" Cutting Capacity (Mild Steel) 0.250" Cutting Capacity (Mild Stainless Steel) 0.150" Cutting Length 122" Rake Angle 0.5 - 2 Degree Number of Hold Down Cylinders 12 Strokes Per
1/2" x 10' Used SMT Pullmax Hydrulic Power Shear, Mdl. GSA-430, Square Arm, Material
$37,500
1/2" x 10' Used SMT Pullmax Hydrulic Power Shear, Mdl. GSA-430, Square Arm, Material
Rated Capacity 10' X 1/2" Mild Steel Maximum Angle 5/8" X 8' Gap In Frame 12" Stroke Rate 18 To 33 SPM Cutting Rake Angle 0.5 To 4 Degrees Distance Floor To Bed Height 37" Square Arm Material su
700 Ton X 20' Used Pullmax Hydraulic Press Brake (Heavy Duty), Mdl.EKP-M 700 20/16, 4 Way
$172,500
700 Ton X 20' Used Pullmax Hydraulic Press Brake (Heavy Duty), Mdl.EKP-M 700 20/16, 4 Way
Capacity 700 Ton X 20' Tonnage 700 Ton Distance Between Housings 16' Pit Required 6' WEIGHT 94,000 Lbs. or 42,700 Kg. Throat 12" 4 Way Die 6", 4", 2", American Die Holder American Or European To
250 Ton x 10' Used Pullmax Optima CNC Hydraulic Press Brake, Mdl. 250.3.1/2.55, Located In
$49,500
250 Ton x 10' Used Pullmax Optima CNC Hydraulic Press Brake, Mdl. 250.3.1/2.55, Located In
Blade Length 24" Tonnage 250 Ton Distance Between Housings 100-1/2" Throat Depth 9" CNC Controller Cybelec Modeva CNC Axis 6 Axis Bed Width 9" Ram Speed: High 215 IPM Ram Speed: Return 283 IPM
40" Used Pullmax Nibbling and Shearing Machine, Mdl. P13, #A7451
$RFQ
40" Used Pullmax Nibbling and Shearing Machine, Mdl. P13, #A7451
Throat 40" Vertical Throat 12" None
12" x 58" Used Promax Milling Machine, Mdl. -, Table Power Feed, 2 Axis Dro Syst
$11,500
12" x 58" Used Promax Milling Machine, Mdl. -, Table Power Feed, 2 Axis Dro Syst
Table Size 12" x 58" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Quill Travel 5" WEIGHT 2,300 Lbs. Horsepower 2 H.P. Table Power Feed 2 Axis Dro System Lube Pu
60 Ton Used Questa Clicker Press (Hydraulic) Large Bed Sliding Table Press, Mdl. Model ARE
$39,500
60 Ton Used Questa Clicker Press (Hydraulic) Large Bed Sliding Table Press, Mdl. Model ARE
Tonnage 60 Bed Area 40" x 65" WEIGHT 12,000 LBS Sliding Table Safety Light Curtains
12 Ga. x 4' Used Roper Whitney Power Shear, Mdl. -, Square Arm, 2- Front Supports, (1) Set
$RFQ
12 Ga. x 4' Used Roper Whitney Power Shear, Mdl. -, Square Arm, 2- Front Supports, (1) Set
Max. Cutting Length 52" Rake Angle 11/32" Number of Hold Downs 10 Strokes Per MInute 76 Dimensions (L x D x H) 70" x 42" x 45" WEIGHT 3,200 Lbs. Square Arm 2- Front Supports (1) Set Of Shear B
7" x 12" Brand New Rong Fu Horizontal/Vertical Metal Cutting Bandsaw, Mdl. RF-71
$1,725
7" x 12" Brand New Rong Fu Horizontal/Vertical Metal Cutting Bandsaw, Mdl. RF-71
NOTE:  This Saw can be used in Vertical or Horizontal Operation.  A Special plate affixes to the head and you can use the saw as a Vertical Bandsaw in just minutes of setup! Operation: Manual Type Swiv
2" Used Rotex Hand Turret Punch, Mdl. 18AK, Full Set Of Punches & Dies, #A7457
$RFQ
2" Used Rotex Hand Turret Punch, Mdl. 18AK, Full Set Of Punches & Dies, #A7457
Tonnage 8 Capacity 3/32"- 9/64" Thru 14 Ga. Punching Stations 17 Throat 18" Stand Full Set Of Punches & Dies
2'' Used Rotex Manual Hand Turret Punch, Mdl. 18, Stand, #A6957
$4,500
2'' Used Rotex Manual Hand Turret Punch, Mdl. 18, Stand, #A6957
Tonnage 8 Capacity: 3/32'-9/64' Thru 14 ga. Punch Stations 18 Throat 18" Dimensions (L x D x H) 28" x 35" x 56" WEIGHT 467 Lbs. Capacity 5/32" ~ 2" Stand
3″ x 3″ x 5/16″ Used Roundo Angle Bending Roll, Mdl. R-3, #A7487
$33,000
3″ x 3″ x 5/16″ Used Roundo Angle Bending Roll, Mdl. R-3, #A7487
Is a Roundo Plate roll machine the best?  What Do I need to look for when I purchase a Roundo plate roller?Equipment Condition:  Assess the current condition of the Roundo PS205 plate roll. Consider factors su
25,000 Lbs. Used Royal Forklift Electric Forklift, Mdl. TE-350SP, Hard Tires, Battery Char
$65,000
25,000 Lbs. Used Royal Forklift Electric Forklift, Mdl. TE-350SP, Hard Tires, Battery Char
Battery Charger Hard Rubber Tires
16 Ga. Used Ruoff Power Notcher, Mdl. #1, Stand, #A7230
$1,850
16 Ga. Used Ruoff Power Notcher, Mdl. #1, Stand, #A7230
A Ruoff Power Notcher is a specialized machine used for notching metal sheets or plates. It is primarily used in metalworking industries, such as fabrication, HVAC (Heating, Ventilation, and Air Conditioning), and gener
75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Produc
$29,500
75 Ton Used Samco Full Beam Die Cutting Clicker Press Machine For Use With Feeder. (Produc
NOTE:  NO FEEDER, CONVEYOR or REELS INCLUDED. Capacity 75 Ton Bed Size (F-B, L-R) 32" x 67" Head Type Full Head Tray Height 39" Stroke (Adjustable) 6.8" Daylight Opening 1.5" - 8.3" Down Stro
50 Ton Brand New Scotchman Ironworker (WITH 3 STATION TURRET HEAD), Mdl. 5014-ET, 50 - Ton
$17,990
50 Ton Brand New Scotchman Ironworker (WITH 3 STATION TURRET HEAD), Mdl. 5014-ET, 50 - Ton
Optional Scotchman Ironworker Accessories:   Call For Pricing.CLICK HERE FOR A #20 PUNCH AND DIE PRICE LISTCLICK HERE FOR A COMPLETE SCOTCHMAN IRONWORKER BROCHURE Reasons to buy a Scotchman Scotchman is Made in
150 Ton Brand New Scotchman Dual Operation Hydraulic Ironworker, Mdl. DO 150/240 - 24 M, D
$53,490
150 Ton Brand New Scotchman Dual Operation Hydraulic Ironworker, Mdl. DO 150/240 - 24 M, D
Optional Scotchman Ironworker Accessories:   Call For Pricing.CLICK HERE FOR A #20 PUNCH AND DIE PRICE LISTCLICK HERE FOR A COMPLETE SCOTCHMAN IRONWORKER BROCHURE Reasons to buy a Scotchman Scotchman is Made in
120 Ton Brand New Scotchman Dual Operation Hydraulic Ironworker, Mdl. DO 120/200 - 24 M, D
$49,990
120 Ton Brand New Scotchman Dual Operation Hydraulic Ironworker, Mdl. DO 120/200 - 24 M, D
Optional Scotchman Ironworker Accessories:   Call For Pricing.CLICK HERE FOR A #20 PUNCH AND DIE PRICE LISTCLICK HERE FOR A COMPLETE SCOTCHMAN IRONWORKER BROCHURE Reasons to buy a Scotchman Scotchman is Made in
65 Ton Brand New Scotchman Hydraulic Iron Worker, Mdl. 6509-24M, 65 - Ton Punch Station (1
$27,390
65 Ton Brand New Scotchman Hydraulic Iron Worker, Mdl. 6509-24M, 65 - Ton Punch Station (1
Reasons to buy a ScotchmanScotchman is Made in U.S.A. -- and we can prove it!Scotchman offers the Best-in-the-Business 3 YEAR-WARRANTY!Scotchman has a SAFE punch & die change out.Scotchman punch is guided
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>