buy & sell, new & used machinery, machine tools & equipment

<Prev | 151 | 152 | 153 | 154 | 155 | 156 | 157 | 158 | 159 | 160 | Next>
Refine: Viewing 15101 - 15200 of 20983 matches
Sort by:
Items Per Page:  20 |  50 |  100
SAKAMURA PARTS WASHER
$RFQ
SAKAMURA PARTS WASHER
EQUIPPED WITH: MOUNTED CONTROLS 220 VOLT 2.7 AMP MOTOR WEIGHT .................... 400 LBS. O.A. DIM. ................. 30" X 33" X 65"
SAKAMURA PARTS WASHER, MODEL #319157
$RFQ
SAKAMURA PARTS WASHER, MODEL #319157
O.A. DIM. ................ 29-1/2" X 35" X 71-1/2" WEIGHT .................... 600 LBS. EQUIPPED WITH: MOUNTED CONTROLS
SMERAL 4" UPSETTER
$RFQ
SMERAL 4" UPSETTER
TECHNICAL DATA OF THE LIFTER: MAX/MIN DIA OF BAR WORKED .... mm100/50 LIFTER CAPACITY .............. KP 350-650 WORKING PRESSURE OF AIR ....... Mpa 0.35 - 0.6 HEIGHT OF BAR AXIS ABOVE FLOOR: -at lowest lifter
4" X 28" TORRINGTON 3 ROLL UPCOILER
$RFQ
4" X 28" TORRINGTON 3 ROLL UPCOILER
Roll Size ................................. 4" x 28" Roll Bearings ............................. Bronze Lubrication ............................... Grease Carrier Rolls (Driven) On 8" Cen. ......... 2-1
6,000 lb., REGAL MODEL #18SPR-ACB UNCOILER / PAYOFF
$RFQ
6,000 lb., REGAL MODEL #18SPR-ACB UNCOILER / PAYOFF
CAPACITY ....... 6000# (3 ARMS) COIL ID ........ 14" - 18" COIL OD ........ 60" COIL WIDTH ..... 24" LEAF LENGTH .... 29" O.A. DIMENSIONS 65"L X 42"W X 50"H EQUIPPED WITH:
6,000lb., AMERICAN STEEL MODEL #60 UNCOILER
$RFQ
6,000lb., AMERICAN STEEL MODEL #60 UNCOILER
CAPACITY ........ 6000# 3 ARMS COIL ID ......... 14" - 20" MAX COIL O.D. ... 60" MAX COIL WIDTH .. 24" O.A. DIMENSIONS 68"L X 46"W X 54"H EQUIPPED WITH: MANUAL EXPANSION CON
4,000Lb. LITTEL MODEL #40-12 REEL UNCOILER
$RFQ
4,000Lb. LITTEL MODEL #40-12 REEL UNCOILER
MAXIMUM COIL WEIGHT ............. 4,000 LB MAXIMUM COIL WIDTH .............. 12" MIN-MAX ID ...................... 15" - 20" (19" TO 24" w/PLATES WELDED TO ARMS) MAXIMUM OD ..................
30000 Lb., LOOPCO 3-ARM TURNSTILE
$RFQ
30000 Lb., LOOPCO 3-ARM TURNSTILE
30,000lbs PER-ARM WEIGHT CAPACITY 38" ARM LENGHT 16" MINIMUM COIL ID POWER ROTATION 58" FROM FLOOR TO TOP OF ARM SLOTTED ARMS FOR C-HOOK ACCESS 110" SWING
20000 Lb., EMAG 4-ARM TURNSTILE
$RFQ
20000 Lb., EMAG 4-ARM TURNSTILE
4 ARM TURNSTILE COILS 20,000 Lbs PER ARM ARM LENGTH: 53" COIL PUSH OFF ROTATION LOCK OVERALL DIMENSIONS: 93" L x 5' W x 24" H WEIGHT: 5,000#
16" WEAN DAMIRON API PIPE MILL
$RFQ
16" WEAN DAMIRON API PIPE MILL
BUILD IN THE MID 70S RE-INSTALLED, WITH MAJOR ELECTRICAL UPGRADE IN 1999 RAW MATERIALS: HOT ROLLED CARBON STEEL STRIP, SLIT TO WIDTH; TYPE X65 & LOWER PIPE GRADE, API 5L/EN 10208 NORM TABLE FROM 219.1MM TO 406.
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
$RFQ
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
TUBE MILL #4 General Specifications: Manufacturer - Mori Machinery Model - MIU-30 Year - 1997 Material - Copper (C1220) Strip Thickness - 0.25-0.7mm Strip Width - 20mm-40mm Strip Coil ID - 400mm Strip Coi
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
$RFQ
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
TUBE MILL #3 General Specifications: Manufacturer - Mori Machinery Model - MIU-30 Year - 1997 Material - Copper (C1220) Strip Thickness - 0.25-0.7mm Strip Width - 20mm-40mm Strip Coil ID - 400mm Strip Coi
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
$RFQ
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
TUBE MILL #2 General Specifications: Manufacturer - Mori Machinery Model - MIU-30 Year - 1997 Material - Copper (C1220) Strip Thickness - 0.25-0.7mm Strip Width - 20mm-40mm Strip Coil ID - 400mm Strip Coi
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
$RFQ
MORI FERROUS/NON-FERROUS SMALL DIAMETER FIN TUBE MILL LINE, NEW 1997
TUBE MILL #1 General Specifications: Manufacturer - Mori Machinery Model - MIU-30 Year - 1997 Material - Copper (C1220) Strip Thickness - 0.25-0.7mm Strip Width - 20mm-40mm Strip Coil ID - 400mm Strip Coi
76.1mm Elmaksan Tube Welding Line
$RFQ
76.1mm Elmaksan Tube Welding Line
Elmaksan 76.1mm Tube Welding Line #5, 1997 Line Direction - Left to Right Max Tube Diameter - 21.3mm to 76.1mm (0.839" to 3.0") Profile range - 20mm x 20mm to 30mm x 40mm (0.787" x 0.787" to 1.18
51mm Elmaksan Tube Welding Line
$RFQ
51mm Elmaksan Tube Welding Line
Elmaksan 51mm Tube Welding Line #4, 1996 Line Direction - Right to Left Max Tube Diameter - 13mm to 51mm (0.5" to 2.00") Profile range - 10mm x 20mm to 30mm x 50mm (0.394" x 0.787" to 1.18"
45mm Elmaksan Tube Welding Line
$RFQ
45mm Elmaksan Tube Welding Line
Elmaksan 45mm Tube Welding Line #3, 1995 Line Direction - Left to Right Max Tube Diameter - 13mm to 45mm (0.5" to 1.77") Profile range - 10mm x 20mm to 30mm x 40mm (0.394" x 0.787" to 1.18"
45mm Elmaksan Tube Welding Line
$RFQ
45mm Elmaksan Tube Welding Line
Elmaksan 45mm Tube Welding Line #2, 1996 Line Direction - Right to left Max Tube Diameter - 13mm to 45mm (0.5" to 1.77") Profile range - 10mm x 20mm to 30mm x 40mm (0.394" x 0.787" to 1.18"
BAO DING 6-5/8" x .300" HIGH FREQUENCY TUBE MILL, 2009
$RFQ
BAO DING 6-5/8" x .300" HIGH FREQUENCY TUBE MILL, 2009
Tube Diameter Range- 1" (25.4mm) - 6-5/8" (168.3mm) Wall Thickness Range- 0.040" (1mm) - 0.300" (7.6mm) Maximum Speed: 80 meters per minute, Shaft Diameter: 110mm, Direction: Right to Left.
4.5" (114mm) x .250" (6.35mm) Mckay Pipe Mill
$RFQ
4.5" (114mm) x .250" (6.35mm) Mckay Pipe Mill
Tube Diameter: 3/8" - 4 1/2" (17.2mm - 114.3mm) Wall Thickness" .060" - 1/4" (2.4mm - 6.35mm) Welding Speed: 50meters/min Coil Weight: 3.5 Tons Material Width: 365mm Max. Spindle Diameter:
3" (76mm) x .134" (3.4mm) Yoder/Somenor W20P Tube Mill
$RFQ
3" (76mm) x .134" (3.4mm) Yoder/Somenor W20P Tube Mill
Diameter: .500" - 3" (12.7mm - 76.2mm) Actual Diameter with existing tooling: -Square: 18x18mm - 50x50mm -Rectangle: 25x15mm - 60x40mm -Other profiles: Oval, Elliptical Thickness Range: .020" - .1
2.5" X .120" TUREK & HELLER MDL#WU-20-10 STAINLESS STEEL TUBE MILL
$RFQ
2.5" X .120" TUREK & HELLER MDL#WU-20-10 STAINLESS STEEL TUBE MILL
Manufacturer....................... Turek & Heller Model.............................. WU-20-10 Line Direction..................... Right to Left O.D. Capacity...................... .625 - 2.5" Wall Thickness.
60" VAUGHN MODEL 60-22-104 VERTICAL DROPOFF BULLBLOCK
$RFQ
60" VAUGHN MODEL 60-22-104 VERTICAL DROPOFF BULLBLOCK
SPECIFICATIONS: - 60" BLOCK DIAMETER x 10" FACE - MAX. ENTERING TUBE 1.665" x .088" WALL - COIL WT 435# (FUTURE 600#) - 15,000# PULL UP TO 550 FPM TAPERING TO 3750# PULL AT 2200 FPM - MAIN DR
60" VAUGHN, No. 60-22-76 VERTICAL DROPOFF BULLBLOCK
$RFQ
60" VAUGHN, No. 60-22-76 VERTICAL DROPOFF BULLBLOCK
YEAR: 1969 SPECIFICATIONS: - 60" BLOCK DIA. x 80" FACE - TUBE CAPACITY MAX. START 1-1/2" OD x .080" WALL - DRAW SPEED: 535/2140 FPM BY FIELD CONTROL 100/535 FPM BY REDUCED VOLTAGE - DIE PU
60" VAUGHN MODEL 22-60 VERTICAL SPINNER BULLBLOCK
$RFQ
60" VAUGHN MODEL 22-60 VERTICAL SPINNER BULLBLOCK
BLOCK........................ 60" DIA. WITH PUSHDOWN FLANGE MAX. ENTERING TUBE........... 1-1/2" OD x .080 WALL MIN. DRAW DIA................ 1/4" OD MAIN DRIVE RATIO............. 7 TO 1 WITH 21.837
60" VAUGHN MODEL 22-60" VERTICAL SPINNER BULLBLOCK
$RFQ
60" VAUGHN MODEL 22-60" VERTICAL SPINNER BULLBLOCK
YEAR: 1970 SPECIFICATIONS: - MATERIAL: COOPER TUBING - SIZE : MAX. ENTERING 1,310" OD x .073" WALL MIN. DRAWN .0250" OD x .028" WALL - ROTUBLOC DIAMETER : 60" - ROTUBLOC GEAR RATI
60" VAUGHN MODEL 22-60" VERTICAL SPINNER BULLBLOCK
$RFQ
60" VAUGHN MODEL 22-60" VERTICAL SPINNER BULLBLOCK
YEAR: 1970 SPECIFICATIONS: - MATERIAL: COOPER TUBING - SIZE : MAX. ENTERING 1,310" OD x .073" WALL MIN. DRAWN .0250" OD x .028" WALL - ROTUBLOC DIAMETER : 60" - ROTUBLOC GEAR RATI
60" VAUGHN MODEL #22-60, SPINNER BLOCK FOR TUBE
$RFQ
60" VAUGHN MODEL #22-60, SPINNER BLOCK FOR TUBE
SPECIFICATIONS: YEAR: NEW 1962 60" (1524mm) DRUM DIA. x 27" (685mm) WORKING FACE COMPLETE WITH: SPINNER CAROUSELS, S/N 12620 PAYOFF 150 HP DC DRIVE
60" FENN MODEL VNC-60-12 VERTICAL SPINNER BLOCK
$RFQ
60" FENN MODEL VNC-60-12 VERTICAL SPINNER BLOCK
60" BLOCK DIA WITH SHEDDING RING TUBE CAP.: 1/4" TO 1.310" O.D DESIGNED FOR 60" DIA. 500# COIL MATERIAL: HARD COPPER DRUM SPEED: 3600 SFM MAX PULL AT DIE BOX @ 100% OF DRIVE, MOTOR CAP. @ 400RP
HAVEN #1 BUNDLING UNIT
$RFQ
HAVEN #1 BUNDLING UNIT
MAX TUBE LENGTH ...... 10' EXIT RACKS ........... (2) 16'L X 21"W X 29"H EQUIPPED WITH: MOTORIZED CONVEYOR
ROTH TYPE RTH-1600 TUBE DRAWING BLOCK
$RFQ
ROTH TYPE RTH-1600 TUBE DRAWING BLOCK
* * * * N E W 1 9 7 3 * * * * This machine is equipped with a 700 mm drum diameter, Draw Capacity of 1600 KGF. Machine is fed via a three arm feeding cross and three arm receiving cross. Has Circular arrange
84" VAUGHN MODEL 84-24-26 BULLBLOCK DRAWING MACHINE
$RFQ
84" VAUGHN MODEL 84-24-26 BULLBLOCK DRAWING MACHINE
AGE: 1981 SPECIFICATIONS: - 84" SPINNER / ROTOBLOC TYPE 8-BASKET CAROUSEL - 9'8" BASKET SIZE - w/400 HP MOTOR - 26,502 LB DIE PULL - OUTSIDE DIAMETER x WALL THICKNESS: 2.52" x 0.157" - 50
60" DEMAG SMS VERTICAL SPINNER BULLBLOCK
$RFQ
60" DEMAG SMS VERTICAL SPINNER BULLBLOCK
AGE: 2000 S/N 360002-200 SPECIFICATIONS: - 60" BLOCK DIAMETER - MAXIMUM ENTERING TUBE SIZE: 1.125" OD x 0.070" WALL - MINIMUM ENTERING TUBE SIZE: .250" OD x .012" WALL - 450 LB MAXI
VAUGHN MODEL 84-24-60 VERTICAL DROPOFF BULLBLOCK
$RFQ
VAUGHN MODEL 84-24-60 VERTICAL DROPOFF BULLBLOCK
YEAR: 1973 SPECIFICATIONS: - 84" BLOCK DIA. x 60" FACE - MAX. COIL WEIGHT: 500# - MAX. STARTING TUBE: 2.20" DIA TO .75" MIN - RATED PULL: 20,000# FROM 100 TO 625 FPM, TAPERING TO 8330# @ 15
84" FENN MODEL HORIZONTAL DROP OFF BULL BLOCK
$RFQ
84" FENN MODEL HORIZONTAL DROP OFF BULL BLOCK
SPECIFICATIONS: - 84" BLOCK DIA. - TUBE CAP. MAX START 2" OD x .100" WALL - MAX. SPEED: 500 FPM - MAX. COIL WEIGHT: 500# - MAIN MOTOR: 400 HP DC - SCR AC CONVERTER - AUTOMATIC COIL UNLOAD
60" VAUGHN, No. 60-22-76 VERTICAL DROPOFF BULLBLOCK
$RFQ
60" VAUGHN, No. 60-22-76 VERTICAL DROPOFF BULLBLOCK
YEAR: 1969 SPECIFICATIONS: - 60" BLOCK DIA. x 86" FACE - TUBE CAPACITY MAX. DIA 1-9/16" - LINE SPEED: 100-2140 FPM - DIE PULL : 12,000# FROM 100 TO 535 FPM TAPERING BY CONSTANT HP AND 3000# AT
60" VAUGHN MODEL #60-22-14, SPINNER BLOCK FOR TUBE
$RFQ
60" VAUGHN MODEL #60-22-14, SPINNER BLOCK FOR TUBE
SPECIFICATIONS: TYPE: ROTOBLOC-SPINNER TYPE BLOCK DIAMETER: 60" (1524mm) DIA. DRAWING SPEED: 0-3000 FPM (0-915m/MIN.) DRIVE MOTOR: 200 HP, 1150/1800 RPM, D.C. VARIABLE SPEED WORM GEAR REDUCER: GEAR RATIO 9.
1" BURR OAK MODEL #DTHF-M1-10 TUBE CUT-OFF
$RFQ
1" BURR OAK MODEL #DTHF-M1-10 TUBE CUT-OFF
BUILT 1973 PROCESSES TWO TUBES WITH SEPARATE CONTROLS FOR EACH TUBE SEVEN (7) ROLL HORIZONTAL & SEVEN (7) ROLL VERTICAL PLANE STRAIGHTENER AIR FEED CUTOFFS DRIVEN BY 1/2 HP DC MOTORS - 1725 RPM WITH CONTROLS CAP
YODER TUBE STRAIGHTENER & CUT OFF MACHINE
$RFQ
YODER TUBE STRAIGHTENER & CUT OFF MACHINE
Basket Payoff Straightener YODER Shear Hydraulic Clutch Payoff Table
1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
$RFQ
1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
DIA. TUBE CAPACITY................ 3/8" TO 1-1/8" 24 ROLL 2 PLANE STRAIGHTENER FLYING HYD. KNIFE SPEED CUTTING IN STRAIGHT LENGTHS. 250-700 FPM LENGTHS........................... 7' MIN TO 25' LONG LENGTHS
5/8" COILCO MODEL #8948 THIN WALL TUBE STRAIGHTEN & CUT-TO-LENGTH LINE, DIA 1/4"
$RFQ
5/8" COILCO MODEL #8948 THIN WALL TUBE STRAIGHTEN & CUT-TO-LENGTH LINE, DIA 1/4"
SPECIFICATIONS: YEAR 1985 DESIGNED USE: GENERALY USED TO STRAIGHTEN AND CUT COPPER TUBING SPECIFICATIONS: TUBE CAPACITY .................................. MIN. 1/4" TO MAX. 5/8" STRAIGHTENING R
1-1/8" SCHUMAG MODEL #RFS HIGH SPEED FINISHING LINE
$RFQ
1-1/8" SCHUMAG MODEL #RFS HIGH SPEED FINISHING LINE
CONSISTING OF: - (1) SCHUMAG FINISHING MACHINE, 1/4" TO 1-1/8" OUTSIDE DIAMETER TUBE CAPACITY - (1) 24-STATION COIL STRAIGHTENER, (12) VERTICAL ROLLS, (12) HORIZONTAL ROLLS, - (1) MARKING SYSTEM, - (1)
POONGSAN TUBE LEVEL WIND LINE
$RFQ
POONGSAN TUBE LEVEL WIND LINE
YEAR: 1997 #3 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
POONGSAN TUBE LEVEL WITH LINE
$RFQ
POONGSAN TUBE LEVEL WITH LINE
YEAR: 1997 #2 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
POONGSAN TUBE LEVEL WIND LINE
$RFQ
POONGSAN TUBE LEVEL WIND LINE
YEAR: 1997 #1 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
MORGAN TUBE LEVEL WINDING LINE
$RFQ
MORGAN TUBE LEVEL WINDING LINE
SPECIFICATIONS: - LEFT HAND - LINE SPEED 1,500 FPM MAXIMUM - TUBE SIZE .250" OUTSIDE DIAMETER TO .875" OUTSIDE DIAMETER - COIL WIDTH 11.5" TO 15.5" - COIL INSIDE DIAMETER 24" PRE-CAST R
MORGAN TUBE LEVEL WINDING LINE
$RFQ
MORGAN TUBE LEVEL WINDING LINE
SPECIFICATIONS: - RIGHT HAND - LINE SPEED 1,500 FPM MAXIMUM - TUBE SIZE .250" OUTSIDE DIAMETER TO .875" OUTSIDE DIAMETER - COIL WIDTH 11.5" TO 15.5" - COIL INSIDE DIAMETER 24" PRE-CAST
ITAM RIGHT HAND LEVEL COIL WINDING SYSTEM
$RFQ
ITAM RIGHT HAND LEVEL COIL WINDING SYSTEM
Basket Type 24" ID, 48" OD Tube Capacity: commonly ran 3/4" to 1" OD 25 HP Motor Rotating Dual Take-Up Mandrels 7-Roll Vertical Straightener 7-Roll Horizontal Straightener Rail Mounted Co
4" DIA. ACME CONDUIT THREADER
$RFQ
4" DIA. ACME CONDUIT THREADER
Length - 10' (Est.) Capacity - Currently set-up for 4" diameter tube (Est) O.A. Dim. 24' L x 6' W x 7' H Equipped with: Walking Beam Loader (2 Stations) Mounted Clamping Hydraulic Operated Heads (6) D
3" FENN MODEL #30-3 HYDRAULIC TUBE END FORMING MACHINE
$RFQ
3" FENN MODEL #30-3 HYDRAULIC TUBE END FORMING MACHINE
One Station Performs Two Jobs Clamp Pressure ....................... 57,000# Thrust (Ram) Presssure ............... 30,000# Work Stroke .......................... 0" - 4" Idle Pressure .....................
NCP TUBE LEVEL WIND LINE
$RFQ
NCP TUBE LEVEL WIND LINE
MANUFACTURER: NATIONAL COPPER CO. TYPE: LEVEL WIND LINE FOR TUBE MAXIMUM TUBE O.D. (AS USED): 7/8" (22mm) O.D. x .045" (1.2mm) WALL THICKNESS MINIMUM TUBE O.D. (AS USED): .312" (8mm) O.D. LINE SPE
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO VE
HERLAN MODEL #TB12-1 AUTO. INDEXING TRIMMER
$RFQ
HERLAN MODEL #TB12-1 AUTO. INDEXING TRIMMER
EQUIPPED WITH: COLLAPSIBLE TUBE TRIMMER TOOTH PASTE TUBE MOTOR
V & O MODEL #982 TRIMMING MACHINE
$RFQ
V & O MODEL #982 TRIMMING MACHINE
CAM ACTUATED MAX DIAMETER .................... 1" (APPROX) MAX LENGTH ...................... 8" (APPROX) EQUIPPED WITH: MOTOR 5 hp, 3 phase, 220/440 volt, 60cycle. SPECIFICATIONS SUBJECT TO INSPECT
HERLAN MODEL #TB-12-1 TRIMMER
$RFQ
HERLAN MODEL #TB-12-1 TRIMMER
WITH MOTOR (NO ID) CONVEYOR MOTOR & GRINDER WHEEL O.A. DIM. ..............4'1" LR X 6' FB X 3'7" HIGH
3" WAGNER THREADER, #WGL/30683
$RFQ
3" WAGNER THREADER, #WGL/30683
O.A. DIM. - 121" X 46" X 58" WEIGHT - 5,465 LBS. EQUIPPED WITH: MOUNTED COOLANT LUBRICATION PUMP 559 VOLT 1150 RPM 5.5 AMP 3 PHASE MOTOR E
PRUTTON MODEL #125B-HV HIGH SPEED DUAL FEED NAIL THREAD ROLLER
$RFQ
PRUTTON MODEL #125B-HV HIGH SPEED DUAL FEED NAIL THREAD ROLLER
DIAMETERS UP TO .......................... 1/4" MAXIMUM THREAD LENGTH .................... 3" UNDER HEAD BLANK LENGTH .................. 3" DIE CAPACITY ............................. 3" SPEED RANG
MANVILLE MODEL # 3-B (#20) THREAD ROLLER
$RFQ
MANVILLE MODEL # 3-B (#20) THREAD ROLLER
3/8" MAX DIAMETER 3" MAX THREAD LENGTH 3-1/4" DIE POCKET DEPTH 60 SPM WEIGHT 6,900 POUNDS O.A. DIM. 78" X 40" X 70" EQUIPPED WITH: CONTROLS MOUNTED 7.5 HP 220/440 VOLT 1455 RPM
3/8" WATERBURY #20 HORIZONTAL HAND FEED THREAD ROLLER
$RFQ
3/8" WATERBURY #20 HORIZONTAL HAND FEED THREAD ROLLER
3/8" WATERBURY #20 HORIZONTAL HAND FEED THREAD ROLLER 3/8" MAX DIAMETER 3" MAX THREAD LENGTH 3-1/8" MAX DEPTH OF DIE 125 SPM FLOOR SPACE 68" X 48" X 64" WEIGHT 7,000 POUNDS
WATERBURY #20 THREAD ROLLER
$RFQ
WATERBURY #20 THREAD ROLLER
3/8" WATERBURY #20 HORIZONTAL HAND FEED THREAD ROLLE 3/8" MAX DIAMETER 3" MAX THREAD LENGTH 3-1/8" MAX DEPTH OF DIE 125 SPM FLOOR SPACE 86" X 48" X 60" WEIGHT 7,500 POUNDS
1/2" WATERBURY-FARREL #30, MID FRAME HORIZONTAL HAND FEED FLAT DIE THREAD ROLLER
$RFQ
1/2" WATERBURY-FARREL #30, MID FRAME HORIZONTAL HAND FEED FLAT DIE THREAD ROLLER
SPECIFICATIONS: 1/2" MAXIMUM THREAD DIAMETER 3" MAXIMUM THREAD LENGTH 60 MAXIMUM PIECES PER MINUTE DIE POCKET 8 1/2", 7 1/2", FOD 3" APPROXIMATE WEIGHT: 6,000 LBS EQUIPPED WITH: RECI
WARDSBORO #WB-250 THREAD ROLLER
$RFQ
WARDSBORO #WB-250 THREAD ROLLER
Screw Diameter Capacity ...................... 2mm - 6mm (3/16") Maximum Shank Length ......................... 50mm (2") Maximum Threaded Shank Length ................ 41mm (1-5/8") Product
WARDSBORO MODEL #WB-250 THREAD ROLLER
$RFQ
WARDSBORO MODEL #WB-250 THREAD ROLLER
Screw Diameter Capacity ...................... 2mm - 6mm (3/16") Maximum Shank Length ......................... 50mm (2") Maximum Threaded Shank Length ................ 41mm (1-5/8") Product
WARREN INDUSTRIES M# WT-1000 HIGH SPEED THREAD ROLLER, 100 RPM W/ BOWL FEED
$RFQ
WARREN INDUSTRIES M# WT-1000 HIGH SPEED THREAD ROLLER, 100 RPM W/ BOWL FEED
1/4" Thread Diameter 2" Thread and Blank Length To 1000 PPM Equipped with: 18" Vibratory Bowl, Variable Speed and Adjustable Pitman AC Motor and Controls Weight 4500 Lbs.
KINEFAC M# MC-5F 2 DIE CYLINDRICAL THREAD ROLLER W/ PNEUMATIC FEEDER
$RFQ
KINEFAC M# MC-5F 2 DIE CYLINDRICAL THREAD ROLLER W/ PNEUMATIC FEEDER
1 1/2" Maximum Die Thrufeed 2" Maximum Die in Feed 2" Spindle Diameter 2 1/4" Die Face Equipped with: Magazine Feeder and Coolant Tank AC Motor and Controls Weight 3000 Lbs.
5/32"WARREN M# WT500 HIGH SPEED THREAD ROLLER W/ VIBRATORY BOWL
$RFQ
5/32"WARREN M# WT500 HIGH SPEED THREAD ROLLER W/ VIBRATORY BOWL
#00 WT-500 WARREN THREAD ROLLER Manufacturer: WARREN Model: WT-500 S/N: 118113 Year: 1981 Condition: VERY GOOD Specifications: DIE REQUIREMENT "00" OR "000" SCREW DIAMETER CAPACITY #0000 TO #6
HILGELAND No. TR4L THREAD ROLLER
$RFQ
HILGELAND No. TR4L THREAD ROLLER
DIAMETER FOR HIGH TENSILE ............ M12 DIAMETER FOR STEEL ................... M14 MAX SHANK LENGTH ..................... 170mm MAX THREAD LENGTH .................... 150mm PIECES PER MINUTE .................... 1
WATERBURY-FARREL MODEL #10 HEAVY FRAME INCLINE AUTOMATIC THREAD ROLLER
$RFQ
WATERBURY-FARREL MODEL #10 HEAVY FRAME INCLINE AUTOMATIC THREAD ROLLER
MAXIMUM THREAD DIAMETER ..................... 1/4" MAXIMUM THREAD & SHANK LENGTH ............... 2" PIECES PER MINUTE ........................... 150 EQUIPPED WITH: 13" 515 ITW SEMS UNIT 2-18"
1/4" WATERBURY SIDE FEED THREAD ROLLER
$RFQ
1/4" WATERBURY SIDE FEED THREAD ROLLER
CAPACITY ....................1/4" MAXIMUM THREAD LENGTH ...... 2" PIECES PER MINUTE .......... 60 EQUIPPED WITH: 5 HP 3 PHASE 220 VOLT MOTOR MOUNTED CONTROLS O.A. DIM.45" X 48" X 59"
WARREN MODEL #WT-1000 HIGH SPEED FLAT DIE THREAD ROLLER
$RFQ
WARREN MODEL #WT-1000 HIGH SPEED FLAT DIE THREAD ROLLER
SCREW DIAMETER .................. #2 - 1/4" THREAD & BLANK LENGTH ........... 2" PIECES PER MINUTE ............... 1000 EQUIPPED WITH: VIBRATORY BOWL 24" VARIABLE SPEED COOLANT PUMP ROTARY CHIP SE
WARDSBORO MODEL #WB-250 THREAD ROLLER
$RFQ
WARDSBORO MODEL #WB-250 THREAD ROLLER
Screw Diameter Capacity ...................... 2mm - 6mm (3/16") Maximum Shank Length ......................... 50mm (2") Maximum Threaded Shank Length ................ 41mm (1-5/8") Product
WARDSBORO MODEL #WB-250 THREAD ROLLER
$RFQ
WARDSBORO MODEL #WB-250 THREAD ROLLER
Screw Diameter Capacity ...................... 2mm - 6mm (3/16") Maximum Shank Length ......................... 50mm (2") Maximum Threaded Shank Length ................ 41mm (1-5/8") Product
WARDSBORO MODEL #WB-250 THREAD ROLLER
$RFQ
WARDSBORO MODEL #WB-250 THREAD ROLLER
Screw Diameter Capacity ...................... 2mm - 6mm (3/16") Maximum Shank Length ......................... 50mm (2") Maximum Threaded Shank Length ................ 41mm (1-5/8") Product
TSUGAMI MODEL #ROL-25, THREAD ROLLER
$RFQ
TSUGAMI MODEL #ROL-25, THREAD ROLLER
WORK RANGE: MAX THREAD PITCH OR COARSET THREAD ................ 12mm 92tpi) MAX MODULE (diametral pinch) ...................... 4M (6DP) MAX SERRATION PITCH ............................... 3mm (1/8") MAX INFEDD
SASPI MODEL #GV-2-10, HIGH SPEED FLAT DIE THREAD ROLLER
$RFQ
SASPI MODEL #GV-2-10, HIGH SPEED FLAT DIE THREAD ROLLER
AGE: 1982 SPECIFICATIONS: MAXIMUM THREAD DIAMETER ..... 8mm (.314") MAXIMUM THREAD LENGTH ....... 52mm (2.04") MAXIMUM BLANK LENGTH ........ 80mm (3.14") MAXIMUM ABOVE DIE ........... 60mm (2.36&#
KINEFAC M# MC-5 THREAD ROLLER
$RFQ
KINEFAC M# MC-5 THREAD ROLLER
THRU FEED DIAMETER, MAX.: 1-1/2" IN-FEED DIAMETER, MAX.: 2" IN-FEED LENGTH, MAX.: 2-1/4" SPINDLE DIAMETER: 2-1/4" DIE WIDTH, MAX.: 2-1/2" DIE SPEEDS: 300-900 RPM MOTOR DATA: 5
5/16" HARTFORD #312M, FLAT DIE THREAD ROLLER
$RFQ
5/16" HARTFORD #312M, FLAT DIE THREAD ROLLER
SPECIFICATIONS: MAX DIAMETER ................ 5/16" DIE POCKET LENGTH ........... 2-5/8" MAX. POCKET LENGTH .......... 2-1/2" PIECES PER MINUTE ........... 33-150 PPM MAX. BLANK LENGTH ........... 5/1
HARTFORD M#190 HAND FEED THREAD ROLLER
$RFQ
HARTFORD M#190 HAND FEED THREAD ROLLER
3/16" THREAD DIAMETER 1-1/2" THREAD LENGTH 30-177PPM EQUIPPED WITH: VIBRATORY BOWL TUBE FEEDING STAND ADJUSTABLE PITMAN AC MOTOR AND CONTROLS WEIGHT 1,500#
HARTFORD MODEL #10-300 THREAD ROLLER
$RFQ
HARTFORD MODEL #10-300 THREAD ROLLER
center> SCREW DIAMETER CAPACITY ............ #6 (.138") THRU 5/16" THREAD LENGTH CAPACITY ............. 1/8" UP TO 3" BLANK LENGTH ....................... UP TO 4" EQUIPPED WITH: LAP
HARTFORD MODEL #10-300 THREAD ROLLER
$RFQ
HARTFORD MODEL #10-300 THREAD ROLLER
SCREW DIAMETER ............. #6 (.138") THRU 5/16" THREAD LENGTH .............. 1/8" UP TO 3" BLANK LENGTH ............... UP TO 4" EQUIPPED WITH: VIBRATORY HOPPER FEED BIJUR LUBRICATION S
WATERBURY-FARREL MODEL #10 THREAD ROLLER
$RFQ
WATERBURY-FARREL MODEL #10 THREAD ROLLER
MAXIMUM THREAD LENGTH .............. 2" MAXIMUM THREAD DIAMETER ............ 1/4" PIECES PER MINUTE .................. 150 MOTOR DATA: 220/440V, 1730 RPM WITH CONTROLS OVERALL DIMENSIONS: 44" L x
5/8" WATERBURY #40 HORIZONTAL HAND FEED THREAD ROLLER
$RFQ
5/8" WATERBURY #40 HORIZONTAL HAND FEED THREAD ROLLER
CAPACITY ....................5/8" MAXIMUM THREAD LENGTH ...... 4-1/2" PIECES PER MINUTE .......... 50 DIE POCKET ................. 6 1/4" x 1" x 4" EQUIPPED WITH: 5 HP 3 PHASE 22
5/8" WATERBURY #40 THREAD ROLLER
$RFQ
5/8" WATERBURY #40 THREAD ROLLER
CAPACITY ....................... 5/8" MAXIMUM THREAD LENGTH .......... 4-1/2" PIECES PER MINUTE .............. 50 DIE POCKET...................... 8 1/2" x 5" x 1 1/4" EQUIPPED WITH:
RTC (RUJA) M# EAGLE IV DOUBLE END, MAGAZINE FEED, PLANETARY THREAD ROLLER
$RFQ
RTC (RUJA) M# EAGLE IV DOUBLE END, MAGAZINE FEED, PLANETARY THREAD ROLLER
MAX THREAD DIAMETER .......... 1/2" MAX THREAD LENGTH ............ 4-1/8 ON ONE END 5-1/8 ON OTHER END MAX BLANK LENGTH ............. 50" PRODUCTION RATE .............. 0 -180 PPM WEIGHT (APPROX) .........
RTC M# EAGLE IV THREAD ROLLER
$RFQ
RTC M# EAGLE IV THREAD ROLLER
MAX THREAD DIAMETER ....... 1/2" MAX THREAD LENGTH ......... 4-1/8" (EACH END) MAX BLANK LENGTH .......... 36" PRODUCTION RATE ........... 0 -180 PPM WEIGHT .................... 6,550 LBS. O.A. DIM. .
WATERBURY #20 HORIZONTAL THREAD ROLLER
$RFQ
WATERBURY #20 HORIZONTAL THREAD ROLLER
SET UP FOR LONG PARTS 3/8" MAX DIAMETER 3" MAX THREAD LENGTH 3-1/8" MAX DEPTH OF DIE 125 SPM O.A. DIM. 98" X 36" X 93" WEIGHT 7,500 POUNDS EQUIPPED WITH: CONTROLS MOUNTED
LOUIS SMALL MODEL #CT75000, HYD. COMPRESSION TESTER
$RFQ
LOUIS SMALL MODEL #CT75000, HYD. COMPRESSION TESTER
SPECIFICATIONS: STROKE OF DOWN MOVING PISTON: 12" DISTANCE PISTON RETRACTED TO LOWER PLATEN: 12" LOWER PLATEN SIZE: 24-1/2" LR x 24-1/2" FB x 2-1/4" THICK LOWER PLATEN ADJUSTMENT: 15"
SHIMAZU M# SUPER 5NR NUT TAPPER
$RFQ
SHIMAZU M# SUPER 5NR NUT TAPPER
SHIMAZU SUPER 5NR TWIN SPINDLE AUTO NUT TAPPER Manufacturer: SHIMAZU Model: SUPER 5NR S/N: 955060 Year: 1995 Specifications: NOMINAL DIAMETER (MIN-MAX)M10-M16 OUTER DIA. (MAX)40 HEIGHT OF NUT (MAX)2MM SMALLER
HAGEN & GOEBEL, #12743 VERTICAL TWIN SPINDLE, AUTOMATIC NUT TAPPING MACHINE
$RFQ
HAGEN & GOEBEL, #12743 VERTICAL TWIN SPINDLE, AUTOMATIC NUT TAPPING MACHINE
YEAR: 1986 TAP CAPACITY 100 TAPS (M8 1.25mm) PER HOUR TO 800 TAPS (M14 1.5mm) PER HOUR EQUIPPED WITH: VERTICAL TWIN SPINDLE AUTO HOPPER FEED BENT SHANK TAP TYPE MOTOR DRIVE: 1.5 HO, 550V, 1420 RPM OVERALL S
HOMEMADE WORK TABLE
$RFQ
HOMEMADE WORK TABLE
EQUIPPED WITH A KNIFE THAT IS 9/16" WIDE, DRIVEN BY AN AIR CYLINDER WITH A 1" STROKE - DOWNACTING. KNIFE RETRACTS FULLY TO PRODUCE 3/8" CLEARANCE. AIR OPERATED - MAXIMUM INLET PRESSURE IS 150 PSI WITH
1-3/4" STANDARD MODEL #3A, 2-DIE SWAGER
$RFQ
1-3/4" STANDARD MODEL #3A, 2-DIE SWAGER
CAPACITY: TUBE .............. 1-3/4" SOLID ............. 3/8" DIAMETER THRU HOLE .......... 1-7/8" MOTOR DATA: 5 HP, 3/60/220/440, 1140 RPM WITH CONTROLS OVERALL DIMENSIONS: 3'2" x 2'8�
1-1/4" TORRINGTON MODEL #4, 2-DIE SWAGER
$RFQ
1-1/4" TORRINGTON MODEL #4, 2-DIE SWAGER
CAPACITY: 1-1/4" TUBE, 5/8" SOLID 2 DIE LONGEST TAPER POSSIBLE: 2-3/4" DIE SIZE: WIDTH: 1-15-16" HEIGTH: 2-11/16" LENGTH: 3" EQUIPPED WITH: - SPINDLE STOP (INFEED) - ELECT
1-1/4" TORRINGTON MODEL #4, 2-DIE SWAGER
$RFQ
1-1/4" TORRINGTON MODEL #4, 2-DIE SWAGER
CAPACITY: 1-1/4" TUBE, 5/8" SOLID 2 DIE DIE LENGTH: 3" TRIM SAW BLADE: 6" DIA. LONGEST TAPER POSSIBLE: 2-3/4" DIE SIZE: WIDTH: 1-15/16" HEIGHT: 2-11/16" LENGTH: 3"
2-1/4" TORRINGTON MODEL #1033 TWO DIE SWAGING MACHINE
$RFQ
2-1/4" TORRINGTON MODEL #1033 TWO DIE SWAGING MACHINE
Capacity, Solid Work (60,000 PSI Material)......... 1" Capacity, Tubing .................................. 2-1/4" Longest possible Taper in One Operation ........... 2-7/8" Die Size ....................
2-1/4" TORRINGTON MODEL #433 SWAGER
$RFQ
2-1/4" TORRINGTON MODEL #433 SWAGER
CAPACITY: SOLID WORK 60000 PSI MATERIAL 5/8" TUBING 2-1/4" LONGEST TAPER IN ONE OPERATION 2-7/8" TOTAL LOAD CAPACITY 112500 LBS. EQUIPPED WITH DRIVE. OVERALL DIMENSIONS: 3'2" x 3'7
2-1/8", FENN MODEL #4-A FOUR DIE SWAGER
$RFQ
2-1/8", FENN MODEL #4-A FOUR DIE SWAGER
CAPACITY, TUBE DIAMETER ................. 2-1/8" CAPACITY, SOLID DIAMETER ................ 5/8" DIE LENGTH .............................. 3" HOLE DIAMETER ........................... 1-3/4" FLYWHE
7/8" TORRINGTON MODEL #6 2 DIE SWAGER
$RFQ
7/8" TORRINGTON MODEL #6 2 DIE SWAGER
MANUFACTURER: TORRINGTON MODEL: 6 MODIFIED- THE DIE DIMENSIONS FOR THIS MACHINE DO NOT MATCH THOSE OF A MODEL #6 ALTHOUGH OTHER INDICATORS SHOW THE MACHINE TO BE A MODEL #6. C
7/8" TORRINGTON MODEL #312 SWAGER
$RFQ
7/8" TORRINGTON MODEL #312 SWAGER
SPECIFICATIONS: CAPACITY: 3/8" SOLIDS 7/8" MAX. TUBE 2-DIE ENCLOSED MOTOR OVERALL DIMENSIONS: 34" LR x 34" FB x 50" H WEIGHT: 2,000#
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 151 | 152 | 153 | 154 | 155 | 156 | 157 | 158 | 159 | 160 | Next>